HP officejet 4650 output tray Extender fake message

Similar Questions

• DeskJet 1510: Message output tray on Fake

  My printer was working fine a few days ago, but now it shows the message to open the output tray while it is already open. I tried the help video provided, but nothing has worked. Help, please.

  Hi @Ashutosh-Dubey,.

  Welcome to the Forums of HP Support!

  I see that your HP Deskjet Ink Advantage 1510 printer gives you a false error message, the display status bar. I will definitely do my best to help you.

  I would like to do a Hard Reset to see if that will solve the problem.

  • Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  • Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  You see lights flashing on the printer? Which?

  Important! Please follow the steps below from beginning to end, even if it may seem unimportant to you.  We need to find the root cause of the fake message and should contribute to this document.

  Question: The Attention is flashing

  In this error condition, the lightweight design of the following control panel appears:

• HP ENVY 114 e-all-in-one printer output tray Extender does ' t open or close when printing

  The tray Extender out on my HP ENVY 114 e-all-in-one printer is not open or close when I print. Currently it remains open all the time so it's not the amount. It started when I had a paper jamb because transport has not opened.

  New impressive @Barkingloon 

  If you have a moment, please click the button of "acceptable Solution" on my last message (Message 2), for others in the community can find thread too in case they run into the same problem.

  Have a wonderful Monday

• LaserJet M1212nf MFP output bin extender

  The LaserJet M1212nf MFP comes with the output tray Extender indicated in the installation guide? I could not find in the shipping box.  It maybe unfold some compartment hidden in the body of the printer?

  Hello fizzix2002,

  Yes, the output tray Extender will be delivered with the unit, inside the box and must be installed after unboxing conversion (described here as the fourth step).

  Should be stored separately somewere inside your box, as for example the power cord and visible, it is not that small.

  Best regards

  AndOne

• OfficeJet 4650: Extension of the tray will not extend

  Hi all

  I recently bought an OfficeJet 4650. After printing the first time, I pushed the tray, and now it will not come back.

  Any advice or fixes?

  Thank you

  Ty

  Welcome @ty_warman,

• OfficeJet pro 8600 output tray

  How do remove you the output tray for legal size paper.

  Hi columbia530,

  You should be able to extend the output tray on the legal situation. If it seems to be stuck, you may need to push in, then spring one or two times to the release. Be sure and be careful when you pull the tray does not break the flap at the end of the output tray.

  

• 8600: broken extendable output tray

  I need the Nomenclature of the printer in order to identify the part number so I can order it.

  The pods that stop pivots on broke the EXTENDABLE OUTPUT TRAY, and now there is nothing no prevents the paper ended on the ground.

  Doomed to failure.

  Thanks for your help.  However, you add the part to the basket, go to the store, and it is that you get!  I'm going to their phone when they open.   I hope that the part number is good, a scheme of BOM parts is really necessary to confirm.

  Cordially TheKing1

• HP OfficeJet 5740: Auto output tray

  I like the feature of automatic output tray.  I noticed under the tray locking mechanism.  If I want to keep the status bar automatically after each print request, can I just lock the State Bar in order to avoid the automatic extension of the status bar?

  Hello
  
  Thank you for using the HP forum.

  The answer to your question is 'YES '.

  Hope that helps.

• Install the output for officejet pro L7680 tray

  How to install a new bin for output on this unit?  My only current broke.

  Hi diane920,

  I regret that these instructions were not useful. Please lift the current output tray, then lift the right side to pop out of position, then the left and remove the plate. If this does not work, it has a little more it will pop out of place to allow you to put the new squirm.

• HP OfficeJet Pro 8620 e-All-in: how to remove the output tray on my HP OfficeJet Pro 8620 e-all-in-one printer

  I can't remove the output tray.  I do some print double-sided (one in color, the other b & w).  It's time to remove the main input tray to place paper for side 2.  It would be much easier to take the 1 side printed just as it ended, and then set it just fine on top of the blank sheets in the main input tray to print page 2.

  I can't remove the output tray.  The store clerk said that it should be easy to remove and re - install, but that it can be kept in place by a piece of tape.

  I'm prone to breaking things, I am working on that.  I don't want to break my 4 month old printer!

  Any ideas?  Thank you.

  The main part of the output tray is not removable.  There are a few alternatives: the tray can be removed partially opened and printed pages, loaded in it - it should not be necessary to remove the tray completely.

  The other possibility would be to simply print using the auto duplexer.  If you are printing on plain paper or paper index, it should work, it would not be suitable for printing on the back of the photo paper.

• OfficeJet 4650: Printing photos

  Printer does not photo paper in the main tray.  Receive in message paper with more than 20 sheets in the main tray.  Printer recognizes the same amount of letter paper and prints well.

  Welcome to the HP community @Taji,

  I read your post on your OfficeJet 4650 photo paper in tray paper do not recognize, and I want to help you solve your problem today.

  Here is a link that includes steps and suggestions on how to print on paper using the HP OfficeJet 4650. Try the steps in this document and let me know if you are having problems or get the error codes.

  All-in-one HP OfficeJet 4650 series - printing on HP Photo paper

  I hope this helps and good luck with your printer.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• OfficeJet 4650

  I did use Easy Scan to scan documents on my computer until this week. I have an Imac and last week installed Sierra on the Mac. The message I get is

  HP OfficeJet 4650 series [C5F08A] is currently unavailable. Please check if it is connected and turned on, or try again later.

  The printer is wireless connected and working.

  Help please!

  Hi @Froglady16,

  Thank you for joining the HP Forums!

  I noticed your post that you can not scan with your HP Officejet 4650 on Mac OS X 10.12 Sierra. I'm happy to help you!

  Please try the steps outlined in this guide, Network Scanner connection is lost (Mac), along with this guide, the printer Scan fails or impossible to scan allow (macOS Sierra).

  If neither guide solves the problem, Contact HP support for help. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this helps!

• OfficeJet 4650: Impossible to scan with my new OfficeJet 4650

  I can print with my new OfficeJet 4650 but the scan function does not work.  I tried using my Windows 7 computer and my windows 10 2-in-1 nothing.  When I start printing and scanning doctor I am getting 2 different error messages:

  Windows 7: "Device Manager is an error that requires a restart of the computer."  I restart and rerun the utility but the same error message appears.

  10: "HP Twain Scan Windows error" - I unplugged the printer, waited 60 seconds, plugged back in and turned on.  Then I restarted my computer and represented the utility and received the same error message.

  Can someone help me with one of these errors?

  Thank you.

  Hello
  
  Thank you for using the HP Forums.

  You can tr to uninstall and reinstall the software COMPLETE features, follow these steps:
  
  1 uninstall the software from your computer
  2. download and save the software COMPLETE features (do not install online)

  The following resources will help you:
  
  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  3. install the FULL feature software "saved".
  
  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
  
  Hope that helps!

• printer officejet 4650: unable to print emails

  When I tried to print emails yahoo, gmail and smartermail, the message asked me to 'save' and I can't find the button to print. Help, please. Thank you.

  Hi @WilliamLi,

  Thank you for joining the Forums of HP Support!

  I noticed that you are unable to print from your email to your HP Officejet 4650 printer accounts. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Gmail, Yahoo, and SmarterMail are web-based email clients which means that they are using a Web browser.

  It seems that the printer is not selected in the print dialog box. Please ensure that you select your printer. Otherwise, it could use a PDF or Microsoft OneNote Driver, printer etc.

  Are you able to print from MS Word, Notepad, or WordPad?

  In the meantime, I would reset the settings of your browser to see if that solves the problem.

  Reset the settings of your Internet Explorer browser

  1. Close all Internet Explorer Windows or Explorer Windows that are currently open.

  2. Open Internet Explorer by clicking the Start button. In the search box, type Internet Explorer, and then in the list of results, click Internet Explorer.

  3. Click Tools and then click Internet Options.

  4. Click on the Advanced tab, and then click Reset.

  5. Select the check box delete personal settings if you want to delete the browsing history, search providers, accelerators, home pages, and InPrivate filtering data.

  6. In the reset Internet Explorer settings dialog, click Reset.

  7. When Internet Explorer finishes restoring the settings, click Close, and then click OK.

  8. Close Internet Explorer.

  Source

  Reset the settings of your Firefox browser

  1. Type Subject: config in the address bar and press ENTER. A list of preferences appears.

  2. Find the preference Print.print_printer (Note: this preference is missing in Firefox profiles where you have never used the printer.)

  3. (Right-click contextual) right-click the preference and select Reset . (Some users may need to reset all the ) ( Print.Printer preferences for a particular printer, if this master preference reset does not solve the problem.)

  4. Restart Firefox and see if the problem is resolved.

  Source

  Reset your Google Chrome browser settings

  1. In the upper right corner of the browser window, click on the menu of the Chrome Chrome

  2. Select settings.

  3. At the bottom, click Show advanced settings.

  4. Under the section "Reset settings", click on reset.

  5. In the dialog box that appears, click Reset.

  Source

  I hope this helps. Please reply to this message with the results. I wish you a nice day!

• OfficeJet 4650: 0XB8000508 error Code

  I get an error code on the front screen of my printer, 0XB8000508.  I'm not finding it in one of the forums.  I can get it to go away by turning the printer off and then back on.  But it has happened twice now.  Can you give me some answers as to what is this error and how to correct?

  Hi gawright59,

  I'm sorry to hear that your printer is getting an error code.  Here is a document that presents several of these errors and describes how to reset the printer when they occur.  http://support.HP.com/us-en/product/HP-OfficeJet-4650-all-in-one-printer-series/5447930/document/c00489814/

  There are several error messages that come from the printer and there is no definition of what each of them average.  It is an indicator of an internal error in the printer State.

  As you can see from the document - reset of the printer is the only step of troubleshooting for these errors.  If this error persists, you may need to replace the printer.  If the printer is under warranty I would recommend that you contact HP customer support (the link is in the above document) to set up an Exchange.   If the printer is out of warranty - continue to reset it for as long as retrieves the unit.  You can start shopping for another printer.

  I hope this helps, and I hope that the error appears again.

  Jean