HP officejet 6500 printer does not print

Similar Questions

• OfficeJet 6500 intermittently does not print half of the last line in the lower doc

  Using an Officejet 6500 E709a connected to Windows 7 64-bit PC via ethernet LAN.  Intermittently, the printer is unable to print a part of the last line of the document.  A 12 point font for example it does not print the bottom half of the letters on the last line of text.  What software (word, excel, PDF, etc.) and it does not matter hwer on the page of the last line falls.  It occurs only on the last page of multipage documents.

  Try that and see if it helps the question:

  1. In the Windows taskbar, click the Windows icon ( ), type control printers in the Search text box and press ENTER. The Printers window opens.

• OfficeJet 6500 icon does not have the software to start

  I have windows 7 on a hard drive and windows 8 on the other disk.

  I downloaded the latest software and driver for printer Officejet 6500 E710n-z.

  I installed 3 times and each time everything installs successfully but when I click on incontinence on my destop, the software does not work.

  Yet, I can print to the printer and its in my printer folder.  I can scan with the scan icon, but the main icon that starts the program does not work on windows 7 or windows 8.

  The main icon gives all the choices I want to do with the printer.

  The same link has steps to perform the patch manually as well

  I work for HP!

• OfficeJet 6500 709n: officejet 6500 709n does not the wireless

  officejet 6500... finished 709n Setup... found and entered the network password... printer shows successful login... computer even wireless network... displays (6500) printer queue of the printer but don't print that physically connected via USB Port... when it is not plugged, in the HP utility message "unable to communicate with the device selected. He may have been arrested or otherwise cut "below,... " nor is the case... HP support is completely useless... Please help... thank you... GEO

  I'm on a laptop from MacAir running OS 10.10 Yosemite

  

  A forum support person was able to direct me to a solution...

  It happened as follows:

  I entered IP address * printer 6500 in the browser bar...

  Opens the Web page of the printer and established a wireless connection...

  Then I DELETED the printer and drivers the MacAir fax

  cue the printer and re-installed the print driver for the 6500 709n

  in the list of available drivers MacAir...

  After that, the wireless connection that could not be made

  used to set up and I was printing without the

  Connecting the USB cable ever since...

  Thanks Forum!

  * IP address of the printer was on the configuration page I

  has been able to print when connected cable OSB... If not, a

  MAC address must be in the back of the printer on a sticker...

  some of these instructions were not specifically made clear in

  General installation information and troubleshooting

  Notice... to me... good luck!

• My new HP Officejet 6500 a does not appear in the printers and faxes

  The HP Officejet 6500 a printer is a wireless all-in-one with fax, print, copy, scan.  I don't intend to use the fax and who did not put in place.  But what displays in the start menu > printers and faxes is the fax but not the printer.  So I can't select it is my default printer.  This is the main problem.

  Which is OK - when I print (with the help of this device or another my printer), since the print page I can select which printer to use and as well the new printer and fax are displayed here.

  Misc info: my other (old) printer is HP psc 1300 all in one, is not wireless and includes a fax machine.
  I have Windows XP SP 3 v.2002.

  Hi desert Ginny,

  I suggest you to install the drivers by downloading it from the following HP support link and check if it helps:

  Download drivers - HP Officejet 6500 has e-all-in-One Printer series

  Also, take a look at the following link:

  Failed to configure a network printer by default for all Windows XP users

  I hope this helps.

• My officejet 6500 paper does not feed correctly (it folds upwards)

  Until recently, my printer worked fine. But after a previuos paper jam, the book will not insert through. She folds upwards instead of rolling.  I removed all the bits of paper that I could see. Say to check the wheel 'stars' someone can the help page tell me how to do this?

  I have ried cardstock through the diet. He took out a piece of crumpled paper, which had been jamming things up. If my printer works now.  So I no longer need an answer.

• OfficeJet 6500 printer E710n-z: Officejet 6500 E710n-z printer is not printing but it says printing doc is printing

  Hp Officejet 6500 printer - E710n - z does not print documents from my PC but will copy the documents placed in the tray of the printer. I set it up as a network printer with a wifi modem in another room. I used the Control Panel, click right in the image of the printer and done research failure, checked the driver (this is the last) and the control panel tells me that the document prints, but nothing happens. I am trying to print with margins of 0.5cms word documents. I tried with 0cm margins and some print and others don't which is the reason why I changed the margins to 0.5cms. I get a warning that the print area is greater than the margin and that some of the document will be lost, but that's okay for me because I am a printing table and you want to cut the paper along the lines of the grid.

  @Marmalade2,

  Looks like it might be a problem with this document, the settings or with Word. Are you able to print from other applications/programs?

  I would like to continue you here: How to troubleshoot printing in Word failures

  I'll watch for your reply.

• HP OfficeJet 6500 wireless do not print because there are 2 days, I changed my wireless router

  Original title: print printer print

  My HP OfficeJet 6500 Wireless will not print because 2 days ago, I changed my wireless router. The printer is no longer under warranty and I'm using Windows 7 OS. I have

  Assuming that there is a wireless connection to the printer, the most likely cause of the problem is that the printer is configured to obtain its IP address automatically, and the new router has assigned to the printer an IP address that is different from that which was initially awarded.

  To check if the above is the question:

  Controls on the front panel of the printer allows you to print a Network Setup page:
  From the home screen, press the right arrow, and then select Setup.
  Touch reports, click Network Configuration Page.

  Find the IP address of the printer on the Network Configuration page.

  On your computer, go to devices and printers

  • Right-click on your printer icon, and then select "printer properties".
  • Click the "Ports" tab
  • WITHOUT clicking anywhere in the list of ports other than the right scroll bar, find the line highlighted (the one with the box in the box)
  • Is the 'Port' the same as the IP address of the printer that you noted on the Network Configuration page?
  • Assuming that the port in the printer properties dialog box is not the same as that shown on the Network Configuration page, click the "Configure Port" button and enter the correct IP address in the box "printer name or IP address.
  • OK your way out

  To avoid this problem does not happen, read the User Guide for the your printer and configure the printer to use a static or fixed IP address.  Choose an address that is in the same subnet as the router but outside the range of addresses used by the DHCP server on the router.  You can find this information on the configuration of your router utility.

  For example, most Linksys/Cisco routers use the IP addresses of the form 192.168.1.x and allocate addresses in the range 192.168.1.100 to 192.168.1.150.  In this case, you should take a static IP as 192.168.1.20 (20 is outside the range of 100 to 150).

• HP officejet 6500: HP officejet 6500 printer

  My HP officejet 6500 printer do not print one color... .we just put new ones in... He took command of printing and the paper comes out of the Virgin.

  I went to the HP support team and they had a video to help with "Troubleshooting", they showed me how to reset my printer.  There were several options which I had already tried... so I did the reset partial... .or you unplug and wait 20 min... then hold it at the same time # and number 3 and reconnect the power chord at the same time... It took 7 minutes for the printer run the test of the colours that mine passed... and my printer works now!   Thank you very much.   HP team

  Ma-donna

• HP Officejet 6500 e710n-z principal: impossible to completely remove the software after the replacement of the HP Officejet 6500 printer

  I replaced my Officejet 6500 printer and removed the software using the 10 software removal tool windows.  The software has been removed, but a message appears everytime I start the computer saying that the software cannot find the 2 support files.  I can turn off the message and continue the start up, but it's still a nusiance that I would rather not deal with every time I start my computer.

  Hello

  Open Windows Explorer and type the following in the address bar:

  %AppData%\Microsoft\Windows\Start Menu\Programs\Startup

  Remove the shortcut to "Monitor alerts ink" and restart your PC in order to ensure that the error no longer appears.

  Kind regards

  Shlomi

• HP 6500 Wireless does not scan

  The printer works fine for printing, but it does not scan.

  When I select scan on the officejet 6500 wireless it is said: 'SCAN MENU SELECT a COMPUTER' any key on the keyboard work only 'OK '. When I select OK it says "No. Scan Option - refer to device documentation to troubleshoot. Press OK. »

  Operating system: Windows 7

  Connection to a printer wireless

  Download/driver downloaded and installed oj6500ve709_basic_14

  Mahalo (thank you in Hawaiian) in advance for your help.

  Hi soccer_crimson,

  Follow the attached document for your Officejet 6500 printer model.

  Steps to follow for issues with WIA - Windows Image Acquisition:

  Follow the steps below to check the WIA Service:
  1. type services.msc in run or search and files program
  2. scroll the page up to the WIA Windows Image Acquisition
  3. make sure that the service is running. Click on stop and then restart to ensure
  4 restart the computer
  
  Restart the services of dependencies:
  1. Click Start, in the search box type "services" without the quotes.
  2. scroll down until you see Windows Image Acquisition (WIA).
  3. double click on it and go to the Dependencies tab.
  4-2 services must be listed.
  5. close this window and look for the remote procedure call (RPC).
  6. make sure it's on manual or if it is enabled automatically, just leave it. Make sure the service is started.
  7. go to hardware detection kernel and Double click.
  8. set the Startup Type to manual and click on apply.
  9. you should be able to start the service by pressing Start.
  10 now, you are done and the Twain Manager must work and gives you is not a mistake. This should solve your problem

• Scan HP: HP Officejet 6500 E710n-z not found

  My printer and fax works fine, but since the time, I can't scan anymore. By clicking on the icon of the Bureau analyzes the message "scanning HP: HP Officejet 6500 E710n-z not found". "." The Wi - Fi connection is ok because the printer works fine.

  If anyone can help?

  TX bonvreno

  Thank you bonvreno,

  Complete the following steps to solve the problem and get rid of multiple entries in Device Manager.

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. The new software - uninstall the printer software Instructions
  4. Once the uninstall is complete, reboot the computer
  5. Follow these steps to reset the registry settings and options for Windows Installer.

• HP Officejet 7110 shortcut does not open

  I have a very frustrating problem. My HP Officejet 7110 shortcut does not open when I try to open it. As a result, I can't check my ink level, etc.. I uninstalled the printer 5 times driver and reinstalled as USB or wireless or even offline, I disabled my antivirus program and disabled the internet during installation, but nothing has the desired result.

  Hello

  Try following these steps under a Solution to install the HP software patch, according to me, which should also help resolvng a question as describe you:

  http://support.HP.com/us-en/document/c03640384

  Shlomi

• OfficeJet 6500 printer a wireless set up correctly, but my laptop does not see the printer.

  E710 OfficeJet 6500 a Plus

  Laptop Dell Windows 7 64 bit version

  The printer is set to work wireless.

  I have the printer set in place.  I could print my wireless test report and have determined "That I have successfully setup my printer wireless."  But when I try to configure the printer on my computer and it asks IP... I give the IP address and it did not recognize the "Can't find printer" looks like I have witnessed this process again and again today.

  I disabled my firewall by following the instructions.

  I used the tool for "troubleshooting your connection to a network printer" stage 5 "

  Then he told me to go to the HP support forum.

  Help, please.

  Thank you

  DB64

  I had charged down the bad print driver.  My printer is a more... years had loaded the wrong printer driver.

• OfficeJet 6500: Print head cleaning Cycle - why not choose a color?

  I'm having a problem with a single color (magenta) print does not correctly. I've had problems before with black. Why the prinhead cleaning cycle does not allow the selection of a single color for cleaning? Why should I lose the other colors of ink when there is only one that needs to be cleaned? I know that HP wants to sell ink, but be reasonable! That I had problems that appear only after you HAVE installed a new ink tank. And it has not shown using a cartridge to power after best-use-by-date. My guess is that if the ink cartridges are not stored properly the use-by-date means nothing.

  There are a few components of the automatic cleaning cycles.  There are a set of wiper rubber that moved across the printhead to wipe or scrape debris from the print head.  All wiping little ink is spit of each nozzle to lubricate the wiper and help clear the clogged nozzles. The wiper is built on a unique sled with a motor that moves the wipers back and forth.  Allowing single color cleaning would require a much more complicated mechanical system, with four distinct and motors wipers to control.  (The wipers should be dedicated for each color.  She would cause the nozzle clogging if the black ink is allowed to mix with the color and would cause if different colors used the same color mixing wiper.)

  Similarly, for your Officejet 6500, there is a pump system for a more energetic cleaning or for initial priming of printhead.  If it was designed for a single use of color, then a more complicated system, with four independent pumps and controls.

  A Mater of reliability and economics, it is not practical to have separated in level printers cleaning cycles.