HP Officejet 6500 a increase or reduce a document before copying

Similar Questions

• HP Officejet 6500 a how to scan a document with several pages in a single file?

  HP Officejet 6500 a Plus e-All-in-One - E710n

  Windows 7 (64-bit)

  How to scan a document with several pages in a single file?  After each scan, my old printer (psc 2110) asked if I wanted to scan another page.  In the end, I got a PDF with multiple pages.

  This new creates a file for each page, and I can't find a way to create a PDF with multiple pages.

  Hi mpw101,

  You must press the Add/Remove button, to add pages additionla scanned to the existing file. If you do not see this button try decreasing the analysis DPI setting. Let me know if this helps you?

  

• HP Officejet 6500 a Plus-710n, multi-page document will not feed through the top.

  There is no error messages, just won't get out the paper. I am able to scan from the glass top, individually, but will not feed from the top on several pages.

  Hi Ginny29,

  I see that you are having problems with your printer.  I'll take a look at the document below.

  OfficeJet 6500 has

  Let me know how it goes.

• HP Officejet 6500 Wireless-black line down the copied sheet

  With the help of HP Officejet 6500 (E709n). When the automatic document feeder, copying copies resulting dating a (thin) continuous black line from the top of the sheet for any length, to 1 3/8 "from the left edge of the worksheet. Line does not appear when you copy directly from glass. Am not able to determine a way to access a possible source of problem (most likely a dirty friction roller). The original user manuals do not address this problem. Search for a solution. Thank you

  Hello lentill24.

  Please, see this document.

  http://support.HP.com/us-en/document/c01612462

  See you soon!

• Printer Officejet 6500

  I have a HP Officejet 6500 wireless and after I replaced a black cartridge yesterday he came and said put paper then and we say an incompatible prinhead.  I have the cleaned than the printhead according to the information, but it looks like it is still not working.  I only use HP products and this printer is about 3 1/2 years.  This is the General lifecycle for this printer.  I am very disappointed and probably will find it cheaper to buy a new.  I searched the site, but I am unable to find the cost of the print head.  Someone at - it ideas

  There is a document, it seems that you both have done most of the, that helps them solve a problem of print quality.  The document can be accessed here.

  As you both are probably off warranty, based on the information provided, then we have a few options at this point.

  (1) we can try the workaround provided by Bob_Headrick in this thread.

  (2) you can buy a new printhead for the HP parts store using the product number CN643a.  Currently, it sells for about US $ $70.

  (3) you may look into buying a new printer.  Be sure to call the HP Technical Support on the upgrade program where you can buy a reconditioned model printer newest, with guaranteed full factory, at a reduced rate.

• HP Officejet 6500 E709n extend beyond 6 to answer fax rings

  Hello

  Have a HP Officejet 6500 E709n all in one multifunction wireless and I can set the number of rings before responses to fax beyond the maximum of 6 factory. Answering machine is set to 4, and all right, with fax intervene if a fax detected as it should. It's that my wife is not always able to get to the phone in time (health problems). Answer machine settings can be 4, 6, or 9 and as all-in-one Max is 6, so both are currently defined the only way I can do all the work (4 for answering machine) & 6 for fax but would like to have more rings on machine - to meet with the largest amount of manual time of the phone , but for this I need to increase on the fax answer rings. Is there a difficulty any more up the maximum factory 6 on the fax?

  Thanks Greg

  Great, thank you very much, now at 6 & 8 as required.

• Of Scanner all-in-one Officejet 6500 problems

  Hello

  I have a brand new Officejet 6500 that prints, faxes and copies without fault.  It is connected wireless to two different computers.  However, for the life of me, I can't scanner at work - and the errors are the same on both computers.  No matter what I do, the scanner software opens and begins to work, but the scanner itself doesn't do anything (no noise, nothing) and eventually I get message and error that says "Scanner Error" with a bunch of steps to try to fix.  I tried ALL the steps, restart the software, reset the printer, unplug, re - connect, re-boot and even re - install the software - still nothing.  Once I even put in place via a USB cable just to make sure it wasn't a wireless issue, and is not; I had all the same mistakes.  I spent two hours on the phone with HP tech support and after changing a bunch of firewall and other security settings, still nothing.  I don't have anythign fancy; just Windows XP, Windows Firewall, McAfee Suite.  Any idea what could possibly be the cause of the errors of the parser and why there is no communication between the computer and the scanner?

  After countless hours to suck his soul troubleshooting with alleged HP 'Technical Support', at least I managed to reduce this problem down myself and find a solution that works.  I found that the problem of scanning don't occurs if the printer OR the computer is connected to the wireless network.

  The solution is to TURN the wireless RADIO and connect to your network via an ethernet cable.  Then try to scan with a computer that is connected to the network via an ethernet cable.  Note that this will NOT work if each connection - printer to the router - or computer to the router is connected wireless; It takes the two connecitons via an ethernet cable.

  This is obviously a software problem that HP does not and will never be resolved.  So, if there is no way to connect your AIO to your router with an ethernet cable (for example, if the priter is in another room), you're SOL and should probably try another printer that HP will never solve this problem.

• Pages come out White HP Officejet 6500 has e-all-in-one printer.

  I have a HP Officejet 6500 a e-all-in-one printer (product # CN555A), and I had problems printing for a while.   I'm working on Windows 8, although the same problem occurs with a Windows 7 laptop that I use sometimes.
  Printer goes through all the movement of printing and pages come out sometimes very thirsty or Virgin (illegible). At the beginning, once in a while it would happen, and once the printer is rested for a few days, it works again. Now it happens all the time and I can't print.  I did ALL the steps of troubleshooting hp and nothing works.   A few days ago, I managed to have it print a little darker, but it mainly printed in gray-greenish, but after the second page, he just disappeared again to nothing.  I think it may be something on the channels contained in the cartridges of ink to the page or something like that.  Can someone help me understand this and the difficulty of my printer?

  Thank you
  )

  Considering that the yellow is almost full and is printing very well, there is actually a small chance that the low level of ink you see (approx. 25%) this is dried up in the cartridge itself.  Think of the ink as a former condiment that has been in your refrigerator for a long time.  When there are more things in the container, it is less likely to dry up, but when you have only a little inside, the air-to-ink ratio increases the chances of this being actually what caused this.

  Although it is cheaper to do the printhead of soaking, it's also much more risky than buying the new ink first.  I highly recommend making sure that you have replaced the low ink cartridges before trying the latest possible stage.

  Certainly, it is probably due to cleanups of printhead, print tests and other basic troubleshooting steps that caused you to be low on ink in the first place.  Maybe double check on the return policy of the store about the ink you buy maybe not a bad idea, either in case you do not buy, does not print, you are soaking the print head and then it also fails.

  Better to be prepared for the worst but hoped that the simplest solution is the best one (Occam's razor) is what I mean by all this.  Keep me posted on what you decide to do.  * fingers crossed *.

• need to find software to download HP Officejet 6500 more e-All-in-One-E710n-z a

  HP does not print. called apple support and deleted driver. now I'm unable to find the driver to download on iMac there.

  HP Officejet 6500 more e-All-in-One-E710n-z a

  Help, please

  Thanks marianne

  You need to access the support Web site HP and search for a driver for your printer, then download it from here.

• Ink system failure Officejet 6500 (no error code specified)

  Ink system failure Officejet 6500 (no error code specified)

  I have turned off the machine on again (and it doesn't)

  I turned off the computer and unplug the unit (and it does not fix it)

  Without specific error code I'm not sure what to do

  Hi CHCA. Your Officejet 6500 must be out of warranty? You can doublecheck the warranty status of your printer here: http://h10025.www1.hp.com/ewfrf/wc/weInput?cc=ie & lc = on -if it is still under warranty, you should not pay for a new printheaad.

  But if your printer is no longer under warranty, you buy one a. The part that you really need to order an Officejet 6500, is CN643A. If you are in the United States, here are the HP part store page where you can order the new print head Assembly: http://h20141.www2.hp.com/HPPARTS/Search_Results.aspx?mscssid=C580393F30964EDD82B16A5C641BEC41 & Searchin' PartNumber = & SearchPN = CN643A

  If you are not in the United States, start from this page: http://welcome.hp.com/country/us/en/wwhowtobuy.html , specify your country and search for CN643A.

  Also, here is a support document that should help you with the replacement of the print head: http://support.hp.com/us-en/document/c01643079

  I work with HP but my messages and responses are mine.

• OfficeJet 6500 Wireless: Lost after upgrade Windows 10 Scan function

  During the upgrade to Windows 7 to 10, I received a message that the printer drivers may not be installed correctly.  I uninstalled and reinstalled the full features of HP software for my wireless Officejet 6500 several times.  No apparent problem until I tried to scan a document.  I get the following error message "cannot scan because another program or computer uses the network of imaging device.  Try again later. "Error information 8, ((0, 18, - 2147467259)) thinking Windows FAX and Scan can be the other program, I disabled it. no change.  HP Print and Scan doctor gives me the same message, "the scan cannot because another program or computer using the networked imaging device.  Try again later. »

  All the features worked before the upgrade to Windows 7 to 10.  There is no other computer the device.  The printer will scan using Windows FAX and Scan, but the HP scanning features are much better in my case.

  Do not remove anything else then the folders I mentioned.

• HP Officejet 6500 a more impossible to connect to the server

  My HP Officejet 6500 a more printer was connected to my wireless network and was attached to the ePrint service; and I had an email address to send prints to my printer. But today, when I go to the ePrint, it shows that my printer is NOT connected to the SERVER!

  He invites me to go to the Setup menu option / Services Web Setup / email address Panel on the printer display. And, when I do that, it shows me: "you can connect the printer to the itenrnet through a proxy server and touch the ENTER PROXY button! I do not know what Proxy Server, he is asked? And when I get soemthing, it then asks a PORT number! Still, I don't know what is the Port! My printer is still connected to my home wireless network.

  Then I went back to HP ePrintCenter page and REMOVED my printer and then tried to ADD a printer, but, now, he asks me to "enter the printing Code.

  When I tried to enter the print code I had on the file, it says that the code was not valid; the codes are ONLY good for 24 hours, and I have to get a new printing code to return to the configuration of the printer menu steps described above!

  Looks like I'm stuck in a vicious circle.

  I would appreciate your help. Thank you.

  To correct the unable to connect to a web server error. I'd start by power cycling the router and the printer. If still we get the error that I will then try to put a static DNS server built-in web printer (EWS).

  To power cycle the router:

  1. unplug the router (most do not have a power button) and then put
  the printer off using the power button
  2. wait 30 seconds
  3 plug in the router, wait until it is completely upward and the operation.
  4 turn on printer
  5. after the printer is completely top and operational reattempt to connect to web services

  If after that, you still get the error message, I had put the static DNS. To do this:
  1 get the IP address of the printer, and then make a browser (IE, Chrome, any browser you want) and enter
  IP address of the printer in the address bar. This will bring up the SEWS
  2. search for the network titled tab and click on it
  3. then click on IPv4 in the left column, wired / wireless depend on the connection, if connected by Ethernet
  Choose wired, wireless select wireless
  4. when loading this page watch the second part entitled 'Configuration of the DNS addresses' change this radio
  Manual button and change the DNS preferred manual to 8.8.8.8 and manual to auxiliary DNS
  8.8.4.4 and then click on apply.
  5. pay particular attention the following screen which appears this message usually is a way to undo changes only
  made by clicking on the OK"" button. Avoid this by clicking another tab
  or just leave it until you close it.
  6 turn the printer of the cycle and then turn it back on
  7. once the printer is back on and retry operation, activate web
  services and reprint information page so that you can get a new code and add your printer back to ePrint Center. You will need to create a new e-mail address for the printer.

• How to connect to the HP Officejet 6500 wireless printer

  I recently bought the printer portable officejet 6500 from costco. Initially, I have it connected via a USB port on my laptop and follow the instructions in the CD. I also activated the wireless to the printer. Now, I'm trying to connect to the printer from my office laptop. I have not installed anything on my office laptop. I went into Control Panel, printers and tried to add this printer. I'm assuming that, given that the printer is already selected for the wireless, I thought that I'll be able to see that when I add a printer. When I tried to add the printer its asking me a URL. I tried to get the printer Network Setup page portable officejet 6500, but the URL does not work. I need to install the CD that came with the printer portable officejet 6500 on my offcelaptop to make it work? Any help would be appreciated.

  Thank you

  @hanleyn, I'd be happy to help you with this problem.

  You will need to go to your settings of the printer.

  1. Select network settings.

  2. Select the wireless configuration wizard

  After perform you these steps, you need to get on the computer and to update the IP address. (It would occur on the printer on the Network Configuration Page).

  Then go to the computer.

  1. click on Start Menu

  2. Select all programs

  3 select the HP folder

  4. Select the name of the computer

  5. click on the IP ADDRESS UPDATE or wireless configuration.

  6. put the new ip address in the place.

• Scanning with Officejet 6500 problems

  My Officejet 6500 printer will scan only from my computer when there is a usb cable attached. Remove the cable, no sweeping. FRO the last 2 weeks in HP Smart people have been scratching their collective heads trying to solve the problem. Is there anyone else with this problem. Maybe we could all have a collective scratch! 2 weeks of my life on this Arghhhhhhhhhhhhhh

  Dear Scratchmyhead,
  
  I have the same problem with the same printer.
  Indeed, it is the error through the programming of the two-way communication via Wifi.

  There is error on HP sid, and they do not have a solution.
  There is a simple solution which is somewhat tidious, but it allows you can scan to receive ink levels wireless and wireless.
  On your printer, go to;
  Configuration > network > view network summary > discovers wireless

  On this page, you will see your printers IP address. Write this down (or remember).
  Return to your computer, open a new tab in a web browser. (IE, Firefox, Chrome, etc.)
  Enter your printer's IP address in the URL bar.
  It takes you to a page that says:

  "Officejet 6500 E710n-z.

  It's your "Built-in Web server" printers

  If your printer is connected to your network correctly, you should see;
  
  Status: loan

  The estimated ink levels: *.

• Impossible Telec... OfficeJet 6500 has

  I have problems with the passage of my printer fax. I have a HP Officejet 6500 has everything in Copier, scan, fax and printer. I created everything correctly according to the instructions. I ran a test 'fax', and he said that my phone line was not active. I use as my ISP Comcast. I called them to test my phone line, in fact, they said that everything is working properly and that the line is active. I use the telephone cord two wires supplied with the printer. Called HP support, no help. They said that the phone cord is defective and I have to buy a new one. Well, I've been all over creation trying to find one and nobody does not sell, only the four sons. Now, I'm really frustrated! I would like to start using my Fax. Help, please!

  Hi @kimberfo ,

  Thank you for using the HP Forum. If your problem has been resolved, please select the button accept the solution.

  Kind regards
  George