Pages come out White HP Officejet 6500 has e-all-in-one printer.

I have a HP Officejet 6500 a e-all-in-one printer (product # CN555A), and I had problems printing for a while.   I'm working on Windows 8, although the same problem occurs with a Windows 7 laptop that I use sometimes.
Printer goes through all the movement of printing and pages come out sometimes very thirsty or Virgin (illegible). At the beginning, once in a while it would happen, and once the printer is rested for a few days, it works again. Now it happens all the time and I can't print.  I did ALL the steps of troubleshooting hp and nothing works.   A few days ago, I managed to have it print a little darker, but it mainly printed in gray-greenish, but after the second page, he just disappeared again to nothing.  I think it may be something on the channels contained in the cartridges of ink to the page or something like that.  Can someone help me understand this and the difficulty of my printer?

Thank you
)

Considering that the yellow is almost full and is printing very well, there is actually a small chance that the low level of ink you see (approx. 25%) this is dried up in the cartridge itself.  Think of the ink as a former condiment that has been in your refrigerator for a long time.  When there are more things in the container, it is less likely to dry up, but when you have only a little inside, the air-to-ink ratio increases the chances of this being actually what caused this.

Although it is cheaper to do the printhead of soaking, it's also much more risky than buying the new ink first.  I highly recommend making sure that you have replaced the low ink cartridges before trying the latest possible stage.

Certainly, it is probably due to cleanups of printhead, print tests and other basic troubleshooting steps that caused you to be low on ink in the first place.  Maybe double check on the return policy of the store about the ink you buy maybe not a bad idea, either in case you do not buy, does not print, you are soaking the print head and then it also fails.

Better to be prepared for the worst but hoped that the simplest solution is the best one (Occam's razor) is what I mean by all this.  Keep me posted on what you decide to do.  * fingers crossed *.

Tags: HP Printers

Similar Questions

  • Unable to get double printing to work. new HP Officejet 6500 has e-all-in-one.

    Impossible to get double print to work after you have installed the duplexer to my new HP Officejet 6500 has e-all-in-one.  I can't find where I can change to double-sided printing in the soft ware.

    ShlomiL wrote:

    This is false,

    You should contact the dept store as was provided with misleading information.

    Below you find the accessories compatible with the Officejet 6500 a.

    As you can find in the list, the duplex accessory is suitable only for HP Officejet 6500 a more e - AiO - E710n:

    http://support.HP.com/us-en/document/c02492482

    Kind regards

    Shlomi

    Thank you very much

    Ron

  • OfficeJet 6500 has more All-In-one: network of disabled features

    hP 6500 has more all - in-one E710 gives the message "integrated network capabilities have been disabled contact your network administrator" when I go to network menu.  I rest to factory default and get restarted three times and still the same message.  Powered down of every thing.  Same result.

    Hello @Walt101,

    I would like to help you today to correct the message 'integrated network features have been disabled. Contact your network administrator' on the front panel of your HP Officejet 6500 a Plus e-All-in-One. This feature is programmed into the printer itself and can be disabled under webserver shipped as part of its security printers.

    If you have configured an admin lock on your printer, you must collect the IP address, your printer off and access the printers built-in web server by entering the IP address in the address bar of the internet browser on your computer. Once you access the built-in web server, you can configure the administrator lock settings.

    If you have not set up a lock on this machine to 'lock' the network capabilities, I'll have to send you a private Message with the semi-complete programming reset so that you can win your network of return capabilities. Please check your private Messages for instructions.

    Good luck!

  • HP Officejet 6500 - E709n: power adapter for the HP Officejet 6500 - E709n wireless all-in-one printer

    I need a new power adapter for my HP Office 6500 - E709n.  Does it matter if I buy an adapter for a model E709a?  Will it work on the E709n?  The power adapter E709a looks identical in the photos.  Thank you.

    Hello

    In fact, they use the same adapter as shown:

    http://support.HP.com/au-en/document/c01636617

    Note: Make sure the 2 sections

    Models all in one HP Officejet 6500

    and

    Power specifications

    Kind regards.

  • HP Officejet 6500 has more all -: want to print, get fax screen etc.

    I am trying to print a document, shows data, fax sending fax etc how do I cut the portion of the printer fax?

    @dman51

    Assuming that the full feature software is installed, the following may be enough to solve:

    Set as the default printer

    I don't know how 'disable' the fax software - if you do not set the parameters, fax is essentially disabled the fax program does nothing - useful or harmful.  You need a landline connected to use fax - leave the disconnected landline and fax is essentially disabled.

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    My answer-click accept as Solution to help others find answers.

  • Error 1053 of the print spooler for HP Officejet 6500 a Plus All in One printer

    I get this error every time I try to install this printer. When I try to start the spooler in Services file, this error pops up. I ran a diagnostic and found that there may be errors of registry key in some files, but I don't kn Ow how to get rid of them. I tried every way start the print spooler, but he won't let me. Other diagnostic tools do not work because I can't even install the printer of dam. Help!

    The print spooler is a Microsoft services so that they would be the best people to talk to.  Most likely, the registry keys for the print spooler has not installed right.  My advice would be to format and reinstall the OS, but you can see what Microsoft has to say before doing this.  They may know a solution for this specific error.  Here is a link to a discussion I found on Microsoft Community on this issue.  I hope this helps.

    Print spooler starts windows 7 error 1053

  • need to find software to download HP Officejet 6500 more e-All-in-One-E710n-z a

    HP does not print. called apple support and deleted driver. now I'm unable to find the driver to download on iMac there.

    HP Officejet 6500 more e-All-in-One-E710n-z a

    Help, please

    Thanks marianne

    You need to access the support Web site HP and search for a driver for your printer, then download it from here.

  • Can't scan on HP Officejet Pro 8500 has e-all-in-One Printer series - A910 using Cougar?

    How scan you on an HP Officejet Pro 8500 has e-all-in-One Printer series - A910 using Cougar? Whenever I try, I get the following message:

    Error message: Scanner reported an error - unable to open a session on the device.

    Hi Irossga,

    This document explains how to use the built-in features to your operating system to scan photos and documents.

     

  • HP Officejet Pro 8600 e-all-in-one printer - N911a (cannot control the size of the item being analyzed).

    Hi all

    HP Officejet Pro 8600 e-all-in-one printer-N911a, XP operating system. It's all new today and I'm very aware of this new stuff. (I'm older)

    My old Scanner from HP (HP Scanjet G 4010) let me resize my photos or obituaries that I put in a genealogy program. When you try to analyze recent articles in my program, in that I have a small image to the left of the page with the rest of a page 8 x 11 white.

    Is it possible to implement on this 8600 or am I missing something?  Any help or ideas appreciated.

    Thank you

    Glen

    Hi oorwill44,

    Welcome to the Forums of HP Support! I understand that you are not able to control the size of the scan, you make your HP Officejet Pro 8600. How did you install the software for your computer that is running Windows XP? How do you scan, you scan the front of the printer, or you use the HP software on the computer?

    Please take a look here: how Scan: Windows XP

    I hope this helps, let me know if you have any questions.

    Thank you

  • Printing DCP color red problem - HP Officejet Pro 8500 Wireless All - in - One Printer, the 4th copy

    I have a HP HP Officejet Pro 8500 Wireless all-in-One Printer and try to print 75 copies of a program for our event. After the first 5-6 pages the RED in my program starts to turn magenta. I have new HP ink cartridges and print on HP Color Injet paper. I have renectly replaced the Black/Yellow Printhead (at least 6 months ago). At the beginning when I cleaned the printheads, I was able to print 2 or 3 pages showing my color RED. Then back to magenta. When I received the images of test after you have cleaned the print heads, they are all perfect, no lines.

    What happens and how can I solve this problem?

    Hi TM1997,

    Thanks for the reply!

    Given that the printer seems to work for a bit and then comes back to the same question, it must be a problem with the printhead (Cyan/Magenta one) or the ink lines that go from the cartridges to print heads. First of all, I would suggest that you check the warranty date on your printhead C/M. If it is under warranty contact HP Technical Support in your area and inquire about a replacement, but if not, it's you if you want to replace the print head, printer service, or look into an upgrade.

    Have a great weekend!

  • HP Officejet Pro 8610: Problems for install HP Officejet Pro 8610 e-all-in-one printer on Windows 10

    We have a HP Officejet Pro 8610 e-all-in-one printer that is connected to the network.

    The printer is installed and can print successfully from 3 desktop with Windows OS 10.

    4 desktop pc with Windows 10 is not able to install the printer drivers.

    When addind printer with device to add the printer is recognized and installed, but only the driver scanner.

    We have tried to remove the printer some time but without success.

    Also, we tried using various HP and Assistant tools, but these tools can not install the printer driver.

    Adding the printer manual, also don't do not install us the printer driver.

    The only driver installed is the scanner.

    We are out of ideas, you can help us with all the great ideas.

    Sincerely,.

    Gilbert

    Hello

    I'm glad to hear that your problem is solved and everything works fine now.

    Good day!

  • cant WiFi connection HP Officejet Pro 8600 e-all-in-one printer to internet

    I can't get WiFi HP Officejet Pro 8600 e-all-in-one printer connect to internet... at least I think that's the problem. I followed all the instructions on the HP print and Scan doctor as well as solve problems of failure to install HP. My router is working fine for everything else and I entered the router the static address for the printer.  It seems that my printer thinks it's connected to my WiFi (Ihave WPS it several times), but when I type there nothing appears in my IE IP address. My router does not see the printer either. I have the latest driver installed on my computer. I suspect that this may be a router problem: new Asus Double 450 Mbps N Router router (dual - band, but it appears my router uses the 2.4 Hz band to connect with WPS). Windows 7 64.

    Any help is appreciated!

    Hello NRHII,

    Welcome to the HP Forums!

    I understand that you are unable to connect the Officejet 8600 via a wireless connection. I will do my best to help you! I would recommend power cycling the router, the printer and the computer:

    (1) turn off your printer
    (2) unplug the power cord at the back of the router
    (3) restart your computer
    (4) wait less than 60 seconds, reconnect the power cord to the router
    (5) turn the printer, wait for the computer to turn on

    The wireless light blinking on your printer? If so, please reconnect the wireless on your printer using the Wireless Setup Wizard: (this information is declared here.)

    1. On the touch screen of the printer, press the right arrow key ( ) to display the second navigation screen.
    2. Tap the Installer icon ( ).
    3. Tap network , tap the wireless configuration wizard , and then press continue . The printer looking for available networks.
    4. Tap the name of your network and then press OK .
    5. If you are prompted, enter the password for the network, and then press OK . The printer connects to the network.

  • HP Officejet Pro 8620 e-all-in-one printer windows 8

    Printer e-all-in-one-HP Officejet Pro 8620 Windows 8.

    wireless printer is. printing from iphone is OK

    Since my PC win 8 not sending a file to filesgo-printer - printer not respongding - no message.

    I have install new printer 8620 on 8600 series of drivers printer or printing only from my PC

    How can I fix the thanks of printing problems

    Hi @yosiwajcenberg , welcome to the forums there.

    I read your post on your Officejet 8620 do not print for you, on your system Windows 8. I suggest you try the following steps.

    1. go to your control panel and uninstall your printer.
    2. hold your key to Windows and the R key on your keyboard to invite the run dialogue box.
    3. Type "coil" and press enter or click OK.
    4. Select and open the drivers folder, select the x 64 folder if you have a 64-bit operating system or the w32x86 if you have a 32-bit operating system.
    5 open the 3 folder, locate the HPBXPSRENDER. DLL file and rename it to HPBXPSRENDER. OLD
    6 reinstall the printer: HP Officejet Pro 8620 e-all-in-One Printer series full feature software and drivers

    I hope that helps!

    Have a nice day

  • OfficeJet Pro 8500 Wireless all-in-One Printer - A909g User guides

    Can you send a fax from a PC to an Officejet Pro 8500 Wireless all-in-One printer when connected wireless?

    Hello dhe8011,

    Welcome to the HP Forums!

    I understand that you would like to know if you can send faxes from your computer. Yes, you are able to perform this function, but must be in place. What is your operating system on your computer? Click here to read: Windows.

    Please follow this entire document from HP on the sending of a Fax from your PC (Windows 7 or Windows Vista).

    Let me know if this document solved your problem or not.

    Impatience on your part.

  • HP Officejet Pro 8600 e-all-in-one printer - N911a user manual

    I have a HP Officejet Pro 8600 - N911a e-all-in-one printer and can't locate a manual for it.  Is there one online? Thank you...

    Hello sforcer,

    Here is the User Guide:
    http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c03026243-3.PDF

    You will be able to find several other manuals from the link following, if the user's guide is not specific enough.
    http://h20565.www2.HP.com/portal/site/hpsc/public/PSI/manualsResults/?sp4ts.Oid=4322914

    I would like to know how it works for you.

Maybe you are looking for