Windows Update will update my drivers? __

Similar Questions

• Windows Vista will not wake up, tried Standard corrections

  NOW SOLVED

  {

  The problem is if the disk cleanup is performed, it can spoil wake up permanently.

  There is a difficulty of MS 50078.

  http://support.Microsoft.com/kb/928897

  However this LOSES all your so previous restore points before you run it, make sure that you got your pc to a stable configuration fully updated after checking all malware (go to malwarebytes.org), then after running manually to create a few new ones.

  You should always ensure that you have the right to "allow this device to wake up your pc" in any power tabs management for keyboard, mouse, and human interface devices.

  If you use a wireless mouse, you may need to go to network adapters and uncheck

  «allow to turn off this device to save energy»

  You can also enable "turn off this device to save power" for other devices that should not be used to wake up your computer, but first you need to read up on cases where it matters or not.

  Google vs sleep extended etc.}

  earlier posts below...

  I read a similar discussion asked by Lucas v21 who seemed to not have a confirmed solution.

  I also have Vista failed to wake up.

  Currently has active power to close screen = 10 min and sleep management = never. If I use the pop - up starting to enter the mode 'sleep', and then I either use the mouse, keyboard or power, the system is unable to wake up.

  It fails also to wake-up if I set the power plan to go to sleep 20 minutes.

  I tried everything that was referenced in the other discussion and several sequences without positive result.

  Here is a brief history.

  Until only March no problems with sleep. PC, a desktop studio Dell 540 with Vista service pack 2 and Radeon 3450 graphics card, logitech wireless mouse and keyboard Dell cable had entered sleep as requires it (display off 10, sleep to 20) for a long time and to wake up so I waved the mouse around or if she replied quickly, I would press the power button. BIOS has S3 STR.

  Towards end of March / beginning of April, I plugged a Tablet samsung 3 to transfer files. Shortly after there are 3 optional updates in windows updates to drivers. 2 succeeded, failed one of the PSG. However, I transferred the files ok because Vista was able to 'see' the data on the Tablet

  Around the same time, I installed an add-on for Excel and ntvdm has stopped working, but then I only restarted, no problem with this software.

  Google Update Wizard has also had an installation failed, but he then installed ok.

  Meanwhile, I have re-arranged the USB connections which included using a hub.

  In early April, I started meeting with failure of Vista to wake up, a couple of times. Then, there were one dozen or more windows (+ C++, VB, VS etc.) and other updates (JAVA, Apple iTunes..) which required restarts so I couldn't go back to early March using the restore. (I have all my files on an external hard drive backup).

  I used restore to exclude drivers Samsung Tablet, but do not remember when I did. Recently, I uninstalled the add-in Excel and other software. The MS software is still there.

  I use Norton Internet Security. I have run msconfig to exclude all services at startup, but service NIS does not seem to find his way back.

  I just disabled and disconnected from the logitech mouse and installed a cable plugged in the mouse.

  What is interesting, is that if I click on the mouse to wake up, I noticed that the laser does not receive power. You will see print screen images depending on whether there are several root showing hubs. There is merely a physical device and direct plugs of the pc. What has not appeared in the previous discussion, is that if the HID devices need to have power management allows device wake. I sent them to do.

  The watch button power management facility works / stop = stop. I tried 'sleep' and ' do nothing ' without effect.

  The screen has buttons which during awakening abortive effort, show "auto-detection" and then say press a key or move the mouse or press the power button.

  I think that's the problem, it's that it is not enough power to the alarm of devices to do their job because of the history of the drivers installed / hubs and that some need to be uninstalled, however when I try that, they are re-loads.

  So are there new ideas on how to wake up for work with power plan settings that put the system to sleep (if not, I'll just have to have sleep = never, or manually stop)?

  The screens soon

  In the meantime thanks for any help.

  OK, now solved.

  The problem is if the disk cleanup is performed, it can spoil wake up permanently.

  There is a difficulty of MS 50078.

  http://support.Microsoft.com/kb/928897

  However this LOSES all your so previous restore points before you run it, make sure that you got your pc to a stable configuration fully updated after checking all malware (go to malwarebytes.org), then after running manually to create a few new ones.

  You should always ensure that you have the right to "allow this device to wake up your pc" in any power tabs management for keyboard, mouse, and human interface devices.

  If you use a wireless mouse, you may need to go to network adapters and uncheck

  «allow to turn off this device to save energy»

  You can also enable "turn off this device to save power" for other devices that should not be used to wake up your computer, but first you need to read up on cases where it matters or not.

  Google vs sleep extended etc.

• Windows 7 will not install the drivers or windows updates

  Hello

  I tried to update my iPhone 5 and in the middle of the update, when my computer tried to install a new device driver, the installation failed. I tried to use a flash drive I've ever used on my computer and its driver installation failed as well. However, I used the iPhone 4 friend (that I used to have) and it worked fine. It seems that my computer don't just install the new drivers. The drivers that I have used before still work. In addition to my driver problem, my computer will also not succeed a windows update. Download updates, but then when I restart the computer to apply the updates, it fails every time. Any idea will be useful. My phone is currently stuck in recovery mode and iTunes can't recognize it to restore it because of my driver problem.

  Thank you

  Hello Cara,

  This problem is usually due to any third-party security software that blocks the installation. I would like to know some information about this problem so that we could help youo more.

  1. what security software is installed on your computer?

  2. do you get any error code or error message? (Mention the error message)

  3. have you made changes on the computer before this problem?

  As a first step, I suggest you to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the fixit for the following Microsoft Fixit.

  The problems that the programs cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 2:

  Temporarily disable the security software and check if the problem persists.

  Disable the antivirus software:

  http://Windows.Microsoft.com/en-us/Windows/disable-antivirus-software#1TC=Windows-7

  Warning: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Try the steps in the following Microsoft Support article and check if it helps.

  How to fix problems with the Windows service install:

  http://support.Microsoft.com/kb/2438651/en-us

  Please reply with the status of the issue so that we can better help you.

• Windows Installer is GONE. Please help me. My computer (windows Vista) will not be updated or install anything. I looked at microsoft, and there are no drivers that are obvious to me.

  I think I did too many updates at the same time and it has messed up my Installer.  I ran 3 virus different scans so I'm sure that this is not a virus.  Looking for drivers from microsoft and nothing.  I'm really frusterated with this one.  If you need information, just send me an email to * address email is removed from the privacy *.

  Hi webchikk61,

  ·         Did you do changes on the computer before the show?

  ·         (Numbers KB) updates you install?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  For reference:

  You cannot install some programs or updates

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

• How will I know if I need to update windows drivers? I continue to receive messages to update the drivers. Don't know if it's microsoft or something.

  I get messages that I need to update the drivers.  Don't know if it's the Microsoft or someone else.  How will I know if I need to update the drivers?

  Thank you

  MS victory do not harass allows you to install the drivers, any notification comes from a third-party utility.

  Have you installed third-party type maintenance programs?

  I would suggest to scan the PC for malware with this utility free http://www.malwarebytes.org/antimalware/

  If you need to update all system drivers depends on if you encounter any problems, in general, if you're not, it is useless

  Pilots are obtained from your PC manufacturers support site, if a brand PC

• Firefox will not hold, but shows in the Task Manager, after updating graphics drivers from AMD 13.1.

  Hello

  After update for drivers AMD 13.1 on my 5770, Firefox will not launch; It doesn't, however, appears in the Task Manager. I want to emphasize that it will boot into Windows safe mode; When I opened it in safe mode, I used this time to deactivate all plugins, modules, extensions and created a new profile. This did not help. I also tried launching Firefox in its safe mode and had no luck with that either.

  I encountered this problem once before, when trying to upgrade to an earlier version. I think I was moving from 12.1 to 12.4, but I'm not 100% sure of that. In the end, my solution was then to retrograde back to my previous driver. The steps mentioned in the previous paragraph has not helped at that time, not do a complete reinstall.

  experience of 15 years, and that computer repair baffled me.

  Thanks to all those who might be able to help.

  Eventually the relevant specifications.
  Windows 7 Ultimate x 64
  AMD Phenom II x 4
  Ram 6BG
  Chart AMD 5770, running catalyst 13.1

  See here

  • https://support.Mozilla.org/en-us/KB/Firefox-wont-start-find-solutions

• Windows Update will now download updates, many different error codes, Control Panel does not open.

  the main problem would be not to download updates, my icon appears in the lower right of windows but I can't open reguradless of what method, control panel and update windows stand closeing

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------------------------------------------

  After the foregoing:

  What antivirus/antispyware/security products you have on your machine? Include all that already been including
  those that you uninstalled. (These can leave leftovers that can cause strange problems.)

  A search for all most .cpl files will be in "C:\Windows\System32" However, you can have others. Click
  each of them at a time and see if it does not start - if so right-click on it and rename it using cpZ as the extension is is to find. Retry Control Panel - if no joy persevering of all .cpl files. (Note that others are under other files under C:\Windows not should be judged, because they are not active).

  Some of them are appwiz.cpl firewall.cpl, desk.cpl, powercfg.cpl, inetcpl.cpl, timedate.cpl and others.

  Try these in case the General corruption has a role to play:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------

  Icons do not appear in the Control Panel, or you cannot start Control Panel, Windows Welcome, or
  Games in Windows Vista
  http://support.Microsoft.com/kb/936686/en-us

  The Control Panel window will not open in Windows Vista
  http://www.tips4pc.com/articles/Windows%20Vista/control_panel_window_will_not_op.htm

  It was reported a updated driver it has blocked, so have you updated drivers
  lately? Also check the driver updates in Windows Updates.

  I hope this helps and happy holidays!

  Rob - bicycle - Mark Twain said it is good.

• The attempt to update Windows to install Reaktek Audio drivers

  I have two HP Windows XP SP3 PC that for some time, I could not get Windows Update to install the Realtek audio driver material it is recommended to be installed.  It gets to a point, then asks in a specific location locate a file.  Of course, I don't know why she asked this prompt, so I cancel and can never get the update to load.  What's up with that?  Any help?

  Hello

  Windows updates is usually only older drivers certified such as this one, MS is far behind the driver certification.
  HIDE the update by right-clicking on it and HIDE. Then update your drivers manually and I also would
  driver updates - see how and why below.

  Here, you want to mainly updated Realtek driver direct from Realtek.

  Click on the HD Audio Codec on the right side of this page.

  Realtek
  http://www.Realtek.com.tw/

  -------------------------------------------------------------

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows Update will not download updates.

  Today I've eliminated my Windows xp and you use the xp disk I reloaded and formatted a new. I did this in the past and had no problem today, I find that after doing everything and windows stops then I went to windows update, that he asked to install active x and will not update download. There is nothing in my add and remove programs. Not sure how to proceed

  • http://*. Update.Microsoft.com

  • https://*. Update.Microsoft.com

  • http://download.windowsupdate.com

  • http://windowupdate.Microsoft.com

  Open Internet Options, Security tab, click Trusted sites, click Sites.

  Uncheck: Require server verification box, add the 4 websites above.

  Try again, if successful, use the custom Option and uncheck all of the updates.

  Read the first update for .net to tell the first and only download.

  Download it, reboot and go back to check again for any .net and .net only download.

  Make updates to .net security, then check again for .net or .net Security.

  When there is no more .net then do the other.

  Perform these tasks in groups and not all at the same time.

  This how to install .net first will save problems later.

  If you want to have the time and Patience, you must install the Service Packs first.

  If you later reinstall OS and you install the drivers manually install the Service Packs right after OS reinstalled before installing any drivers. You can first install the drivers but it is better Service Packs first as sometimes when you install a Service Pack after the drivers, you can find some drivers do not work and you have to reinstall these drivers.

  For people using the original image, your drivers are already installed then install Service Packs just after the factory restore before installing applications or devices or download Windows updates.

  Service Packs using immediately also save hundreds of download of the updates of Windows first of all that all updates to the top until the release of Service Packs are included.

  XP Service Pack here:

  http://support.Microsoft.com/kb/322389

  You can download it manually or order a CD from the link above.

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Here are the numbers 1-800 that will put you in contact with a human being who will take your order: team Microsoft Supplemental part. The disc will cost $3.99 more delivery charges.

  1-800-360-7561 United States

  1 Canada-800-933-4750

  Vista Service Packs here:

  http://TechNet.Microsoft.com/en-us/Windows/bb738089

  This page will display the SP1 of Vista, under the heading: order a DVD of Windows Vista SP1, click on your region and then select your country and will take you to a page where you can buy the SP1 and SP2

• Update of Windows configured to never install drivers

  My computer Gateway dx 4640 OS windows vista top pk2

  Please how I have configured windows update to install the drivers and how to problem of Fixer with \driver:\acpi answer sloww

  thonson35,

  According to conventional wisdom, you should not install new drivers, if all goes well with your computer, because doing so may mess up something that worked fine before. It is true that this side effect can occur, but you're much more likely to improve the performance of your PC.

  To minimize your risk of breaking your PC with a bum driver update, create first a point of system restore you can come back to if something is wrong: type to create a restore point in the search box of the start menu and click on Create... in the window that opens. This will create a safety net that you have access to, no matter what happens.

  Your next step in upgrading the drivers should be updated to Windows. Click search for updates, and then click the text noting how many updates are available. Generally Microsoft class driver as optional updates, so even if the text Windows Update indicates that you have not need for critical updates, you should always click the link. Check the box next to all the drivers updated, and then click OK to install.

  Then, visit the Web site of the manufacturer of your computer or devices you have connected to it. Check the support page for your machine and download the new drivers that appear. In most cases, you will need to know the particular piece of hardware that is installed on your computer (check Windows Device Manager if you are not sure of the model number of a component is), and you should only download the drivers you need. Install the new drivers according to the instructions; This step usually involves a simple executable file running and then restart. Test your system carefully after each driver installation and make additional system if restore points you're upgrading of several drivers. The biggest performance gains result from an update of your BIOS, motherboard drivers, and graphics card drivers.

  Credit: PCWORLD.COM

  05/15 / 1104:32: 50 am

• Windows Update has no "Driver" tab and Windows Update provides no way of specifically updated device drivers that do not work correctly.

  Windows Vista Home Premium (32 bit) shows no "Driver" tab within the "Windows Update" program... and I can not specify in any way I want to update the drivers. Help! Does anyone have an idea where I can go to in Microsoft.com to perform updates of my drivers on my machine?

  I expect your reply.

  You are welcome.

  And certainly let us know how it works.

  ____________________________________

  Here is some other information about the Windows updates for you, I put in place some time and which you may find useful if you are having problems with Windows updates:

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You must only obtain the latest drivers for them to the site of the real hardware manufacturer, like Microsoft normally does not have these latest drivers available as Microsoft invokes the material part 3rd RTOS provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  'Remove an update - Windows 7'

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Windows Update will download sometimes. But nothing else will download.

  Windows update takes over sometimes.  Don't other times not.  Nothing else will download.

  IE9 Vista 32

  A ran the aid elements that I had access to.

  Impossible to download other MSN help elements to understand the problem

  Avast says I'm fine.

  Restored both previous midweek December 2013.

  Problems began.

  Windows options for research problem have been executed, but can not download other options.

  IE9 says it's fine.

  Don't know if the problem is with Windows, or IE

  Lost.

  Hello

  No error codes or other details for us to work with, give your machine a melody by following these steps.

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Update drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea to run the System File Checker tool if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  If SFC detects serious flaws, you may need to perform a repair upgrade Installation or relocation complete if you don't have a Vista DVD from Microsoft.

  If you can borrow a DVD of Vista from Microsoft you save doing a reinstall full:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• I have 3 devices (obsolete drivers?). I read the help topic I got 3 errors in windows update

  I used uniblue freescan and suggested that my pilots have 3 devices that are outdated. (1) what was installed, was 6.0.6000.20080 for controllers realtek usb 2.0 card reader / universal serial bus. But he suggested that I update to 6.1.7600.30118

  (2) what was installed, was 7.6.0.108 for the atheros AR9281 wireless network adapter. But he suggested that I update to 7.7.0.449

  (3) what was installed has been 6.205.403.2008 for the realtek RTL8102E Family (NICs PCI-E Fast Ethernet NIC NDIS 6.0) But he suggested that I update to 6.243.1025.2010

  I also used the windows help and Support for details how to update the registry, and he also exclaims that I have a Windows update error: 8024001F and 8000FFFF and also 80070646 or 646

  I'm not savvy computer very, but if I show a procedure step by step details on how to repair or fix the problem. I'll certainly try to learn and understand how to accomplish this detailed information. I hope that I gave a lot of information that my problem may be or if he is in at all? Your help will be very appreciated. Thank you

  Given that you are willing to learn, to stop using the free scans of the internet, you will get your computer in trouble later. If your devices perform very well there is no reason to change drivers. However, if you feel a need for your devices performs better go to your computer manufacturer and check if updates are available. Also, forget not, everything simply because you change a driver does not mean your device will be more efficient. In most cases updated drivers will have little or no significant effect and can even run poorly. If you want to learn how to install a driver, download a driver, then follow the instructions, it is a fairly easy task. If you later want to restore the previous driver, it is also a fairly easy task and we can help you here.  Windows Update error 8024001F means you have lost your connection to the internet when checking for updates to fo, you can ignore it. Update Error 8000FFFF is a registry key, do not mess with the registry at this point, go here to fix it.     http://support.Microsoft.com/kb/946414 update error 80070646 is a registry key, go here to solve this http://windows.microsoft.com/en-gb/windows7/Windows-Update-error-80070646-or-646 I see you already know these fixes of your post. It is only by mistake that human beings humans learn how to do things, curiosity , and the desire.

• Windows Update drivers

  I got the drivers for my XPS 15z from here http://www.dell.com/support/home/us/en/19/product-support/product/xps-15z/drivers , but WIndows update offers updates pilot different devices.

  Should I install them?

  Install the drivers from Dell.com - software system first, then chipset, then all other cases managers - updated Windows will offer you all the drivers for your specific hardware that are newer than what you have installed.  In MOST cases, that's fine.  If you notice any problems, simply uninstall/rollback and hide the update.  I never saw a bad drivers from Windows Update once on 150 workstations + and a dozen different models, I managed.

• Suddenly, all the printer drivers on Windows update are not digitally signed? So, how to re - install my 3 printers?

  Suddenly none of the printer Co. provides always the downloaded drivers more! And they all quit working, pilots didn't is more accepted, after problems with the Windows updates in general, seem to be fixed now.

  And I finally see HP instructions for a workaround 4 pages long, in Device Manager. But no driver is never accepted to be unsigned digitally suddenly...

  All the printer drivers on Windows update are digitally unsigned? So, how can I install my 3 printers? They are too recent to have discs and HP and Lexmark refer to Device Manager find but none will install because they are not digitally signed. I have W7, W10 and a XP computer for when I have a really frustrated with Windows. Like now.

  How can I reset W7pro and W10pro to accept these drivers yet once, to accept unsigned drivers? What is going on!!!

  Thank you

  I fixed most of my problems of

  -Restore W7 to the 07/01/16 mode without failure and update of the manual setting W.

  -Go back to Firefox 32, with no updates

  -find something new called firewall W features advanced security and made some slash and burn allowing in there

  That's all the misfortunes of weird denied permissions disappeared. I guess I'll stay frozen in time until I get a real solution to all this new protocol permissions I lock the...

  Thanks to you all. I can finally sleep a bit now!