HP Officejet H470

Similar Questions

• OfficeJet h470: Officejet h470 bluetooth with lozenges of galaxy Samsung... asking to enter a PIN.

  Under settings/bluetooth on my Samsung Galaxy tablet, it detects the Officejet h470, but it asks me to enter a PIN. I have a HP bluetooth supplied with the printer, but I can't find a PIN written on this subject? He also says that I have to type the pin code on the printer, it is impossible to do!

  I have searched this forum but could not find anyone with the same problem.

  Anyone know how to bypass this?

  Hello

  Enter the default PIN Code which is '0000' (four zeros).

  If denied that reset the bluettoth settings as follows and then try again:

  1. Press and hold the power button.
  2. While pressing the Power button, press the button cancel 4 times, and then press the button repeat 6 times.
  3. Release the Power button.

  Now try to connect to the Bluettoth device using the value by default "0000" code to access again.

  Kind regards

  Shlomi

• H470 printer: HP Officejet H470 - left, ink blinking and does not print

  I have a HP Officejet H470 mobile printer.  I have a problem with the left blinker light ink (color ink). This printer should always print with black ink only, but there is a problem - left flashing and when I try to print something happened any reactions...

  I followed the steps of troubleshooting at http://support.hp.com/us-en/document/c01182351 but it does not solve the problem. I cleaned the contacts on the cartridge and the printer, I bought a new color cartridge but I still have the same problem. Can you help me?

  Hey @miamiparis,

  Welcome to the Forums of HP Support!

  I see that you have some problems with a cartridge error on your Officejet H470 printer. I can help you with that, but it seems that you have done all the troubleshooting steps available for this issue. If this is the case, the printer needs to be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know if you are able to reach a resolution with the support. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Is OfficeJet h470 eprint

  My officejet h470 mobile printer eprint is capable

  Hi Virginnia,

  Officejet h470 mobile printer is not an ePrint printer.  If you are using a mobile device, then you can try to use ePrint below apps to work around the problem.

  HP ePrint Android app

  HP ePrint iPhone

• OfficeJet H470 does not print

  Hello

  I hope someone can give me some ideas.

  I have a remote user with an Officejet H470 and a Windows 7 laptop. When he tries to print, you can see the work of disappearing from the print queue and the printer makes a noise like it is printing of starting and then it stops and nothing happens.

  They tried to restart, reinstall the drivers, in connection with a USB cable and bluetooth, and there has been no change.

  When you decide that the printer needs to be replaced?

  OK, I thought about it.

  It turns out that the printer was broken and had to be replaced. I had him try to print a test page for the printer using the power/cancel key combination and he won't.

  In fact, he had another similar printer so we turned on that one and it took the test and it worked fine.

• Officejet H470 HP: H470 DOES NOT PRINT

  My printer was working normally until I had a paper jam. I deleted this and then my printer would not print.  I tried all the dignostics and the problem persists. However, the printer will print me a diagnostic report, but not a page of test computer records or Word. This means that the original jam has been authorized and the problem is software partner. I would be grateful for all clues solve this problem.

  Hi there @Hessvic,

  Welcome to the HP Forums!

  I understand that you had already authorized a paper jam in your Officejet H470 and now the concern seems to be that you can't print from your computer at all. I looked through guides, troubleshooting and playback of the steps to try to help you with this and found the guide below. The steps are excellent, and I would suggest trying them all carefully. You should be upward and printing again later.

  • Monofunctional and HP Printers Multifunction - "the printer is offline" Message appears on the computer and the printer does not print: Windows 7

  Good luck and I hope this brings print to life for you!

  If you want to send me a 'thanks' to answer your concerns to try to help, click on the thumbs up below!

• OfficeJet H470

  I just installed new color and black cartridges in HP Officejet H470, and after doing this, the resume light and light flashing and will not stop.  I looked at the web site of the product, and the two proposed problems it (jam of hub and USB paper) are not the issue.  I have disconnected and reconnected to the computer and turned on the printer and on again.  He had previously worked, but only very bad print quality, because it had not been used for awhile, and the ink cartridges were probably dried out.

  @bakerboy44, I'm sorry you have a problem with flashing lights.

  Here is a link that can help you with this problem.

  http://support.HP.com/us-en/document/c01182351

  Let me know if it helps.

• Printer cartridges 95 and 98 for HP Officejet H470 - what cartridges are stirred in Spain?

  Help, we are in Spain with our HP Officejet H470 that takes the #95 cartridges and 98 # in the United States. However, here in Spain it is not the cartridges with these numbers.

  Can someone tell us how to determine on which numbers here in Spain could be compatible with our printer?

  I tried to ask to HP and they wouldn't take my question because the printer is out of warranty.

  Thank you!

  Thank you... I assumed it would be easier to have someone send me the cartridges of the United States or to buy a printer here, someone have reset the printer. It's an old mobile printer and I can get a new printer for pretty inexpensively here.  I never imagined that with an international company like HP that the products are not interchangeable and compatible.

  But thank you very much to stop me from buying cartridges that would not work here.

• Compatibility of Portable HP Officejet H470 with Windows 7 wireless capabilities

  I bought a HP Officejet H470 back in 2010 and the wireless features are not compatible with Windows 7.  Does anyone have information looking for drivers of compatibility?  I did not.

  Original title: Portable HP Officejet H470

  It seems that if cut off the part of your answer.  For this

  When I download the base drivers or the full version, the system does not recognize my USB connection.  Can't find it on the

  say you cannot the printer to be installed even by using a USB connection?  The printer must be installed using the USB cable before installing the wireless adapter (although this is not mandatory).

  This

  When I insert the USB key for the printer (802. 11 b/g adapter USBeless LP/SC) the following message is what I get when I try to update the driver:

  The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver.

  sounds as if you plug the wireless USB adapter into your computer.  If I understand correctly, you're supposed to plug this unit into the printer.  See these directions: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01160515&tmp_track_link=ot_faqs/top_issues/en_us/c01160515/loc:1 & cc = us & dlc = en & lc = en & product = 3619495 for some pictures.

  I think it's time for a fresh start.

  What follows assumes you have another printer installed on this computer (or you don't mind reinstalling all other printers).  If this assumption is not correct, proceed to the "light option" below.

  This procedure also assumes that you have never installed this printer on a network that uses a router. Your printer is able to record 3 different network profiles.  As far as I know, the Setup program on the CD assumes that the printer is at its default value of the plant, so if you have already configured the printer works on a wireless network, Setup may not work correctly.  To deal with this, the simplest method is to reset the configuration of the network default printer (assuming that you have more need configured network settings before).  To reset all 3 network profiles, press and hold the Power button, press the Cancel (X) button twice and then press the Resume button (down arrow) six times.  See user's Guide page 58

  1. Unplug the printer from the computer.
  2. Uninstall all software of printer from the control panel > programs and features.
  3. Download and run Microsoft 'Full mode' fix 50979 from here--> http://support.microsoft.com/kb/2793718/en-us
  4. Restart the computer.
  5. Connect the adapter to the printer wireless
  6. Run the "full functionality" package that you downloaded (OJH470_Full_13.exe)
  7. Click the menu button for the type of connection to use (wireless)
  8. Follow the on-screen instructions, temporarily connect the USB cable when prompted

  For more detailed instructions, see pages 50 et seq. of your User Guide.

  Light option (if you do not want to uninstall and reinstall other printers):

  For step 2, don't uninstall the HP printer software

  For step 3, use the "light" mode fix 50984 from the same web page, such as 'Full' Fix It mode.

  For an explanation of what do Fix It mode light and complete routines, see http://blogs.technet.com/b/askperf/archive/2012/02/24/microsoft-fixit-for-printing.aspx?Redirected=true&PageIndex=1#comments

• Compatibility problem with OfficeJet H470 and cartridge HP 138 (C9369HE)

  Just bought a new photo of HP C9369HE-cartridge for my printer H470b and have an incompatibility problem. The cartridge does not fit into the socket of the cartridge, because the edge of plastic on top of the cartridge.

  Have you checked the cartridge on SureSupply model - it is in the list of compatible cartridges.

  No original HP black cartridge? or there are different modifications of the HP OfficeJet H470b printer?

  Just having realized my error... I try to put the photo cartridge in the Tricolor cartridge slot, but it must be inserted into the slot of the BLACK cartridge.

• OfficeJet H470 error lights will not erase

  Hi, I have an Officejet H470wf printer that is sick.  The power and reset Flash while the ink (left and right) lights are on solid.  The Web site indidcates that it is a sign of an ice jam, however, I checked that there are no jams, reset the power, etc., and the lights are the same.

  Any suggestions to fix this?

  Here's a link below which may help you with this issue, please let me know if this can help, thank you.

  http://goo.GL/m773c

• A HP Officejet H470wl will work with the MacBook Air

  A HP Officejet H470wl will work with the MacBook Air? The driver is still supported? I'll buy an Air.

  Hello..

  New Mac come with v10.11.x El Capitan pre installed.

  I checked for compatible drivers (software) for pinter them HP > http://support.hp.com/us-en/product/HP-Officejet-H470-Mobile-Printer-series/3434 453/model/3434454/document/c04510394 /

  Fact on the Mac, you would use Software Update to install the drivers according to the HP website.

  Printer and scanner software available for download for your Mac

• Windows xp and officejet 470

  My printer manual portable officejet 470 says it's compatible with Windows XP. But, said the Windows 7 installation disc and when I try to install, it fails with the message: Windows 7 required. Can I get a CD drive to install the 470 for a Windows XP computer?

  Hello

  It is a HP Officelet H470? There is only one CD. Please download the software and the following driver and install on your Windows XP-based computer:

  http://ftp.HP.com/pub/softlib/software9/COL21505/bi-56465-1/OJH470_Full_9.exe

  Source: http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-H470-Mobile-Printer-series/3434453/model/3434454

  Kind regards.

• HP Officejet Pro K8600: HP Officejet Pro K8600 - is no longer connected, print - driver lost?

  DISCLAIMER: I understand that it is a large display. Please, please read it carefully before suggesting the diagnosis. While I'm not an advanced programmer, I am very computer and am usually able to solve minor to somewhat advanced questions. However, I've exhausted my knowledge and my skills to no vail here...

  CLARIFICATION:

  I use a processor 3 GHz Intel i7, 12 GB of RAM on Windows 7 Pro 64-bit (Service Pack 1) OS. My printer is a HP Officejet Pro K8600 - it is NOT an all-in-one printer. This is a printer large format, single tray. I have Avast Home Free edition runs on the PC as well as SBSD and widows firewall ACTIVE. In my Panel "Devices and printers", it also shows that I have the following 'printers' installed: Adobe PDF (copy1), Fax, Microsoft XPS Document Writer, PrinterShare, Quickbooks PDF Converter, QuickBooks PDF Converter 3.0 and send to OneNote 2010. Windows Update has been on 'Manual' which allows me to choose which updates to install and when. However, at some point during this troubleshooting - I for 'auto' changed, so I don't think there are a few updates to Windows that has been installed automatically.

  Just for additional notation, I also use a double 4 operated by two NVIDIA graphics cards monitor display monitor. Not that it should be any problem because I use this configuration for some time. However, I was surprised to find that some software does NOT support more than two monitors. Very strange.

  SCENARIO:

  This printer is about 6 years old. It has been a great printer and I rarely had problems with it apart from maintaining normal jet ink and minor errors. I have been successfully connected to the current computer at least 2 years. Once again, never problems. The printer is connected directly to the computer using a USB standard cord - less than 12 feet long. Printer is also shared on the home network and I can usually print using my laptop in the network without any problems. Printer is on a shelf on the wall above my workstation.

  QUESTION:

  PART A: Two days ago, I was about to print a simple, small Photoshop CS3 PDF image. It is a daily task - size of the document was less than 11MB. The printer has not initialized as usual - I noticed that the light flickered.  But the printer is trying to print (print head not move not, does not feeding paper, no noises). So I tried to follow the standard troubleshooting methods by which is obvious - restart the printer. The flashing light has not disappeared. I have checked for jams, reinstall the carttridges and opened and closed all the doors - and then restarted the printer again. I also restarted my PC at the moment. Aware of the printer light continues to blink. I then the 'X' button on the printer while the printer power off and power it back up. This (I believe) ran a diagnostic standard and print a test page. Everything seemed normal on the print. Power led is no longer flashing. I have Open the printer only and cancelled all documents -removed something that was there. Schecked double for all other printers (I) with the documents in the respective queues - nothing found. Also noticed that the printer status is "Offline."

  PART B: Now, I decided to print a simple Word document. This time the printer did nothing. No sounds, no lights flashing and no movement of the print head. I decided that I was going to unplug the USB from the PC and plug it into another USB port. This caused Windows to try to 'install' the printer drivers - I assumed that they would be fair here. However, I got the following popup status of driver-

  

  This, of course I worry about. Again, I have anoccupant to print a regular Word document. Printer has not responded at all. So I checked the devices Panel and printers and found that the printer has been listed but showing "status: troubleshooting needs. I right clicked on the printer icon and clicked on "Troubleshooting". Then I got this-

  

  Then I clicked "Apply this correction" - which was not a "fix." Simply, she re-launched Windows in order to install the driver. Which resulted in the same popup indicating the status of driver install - but have not installed. I checked the policies of the printer to make sure that no documents were persistent. There is no document for any printer listed.

  PART c: Now, I go to support and download the section of the HP Web site for my printer model. I have download the latest package of driver/software for my version of Windows. Once the software installation begins, it ends up by asked me to unplug the USB for my printer. I did it. Then later in the software/driver installation, it asked me to re - connect the USB port of the printer to the computer. I did it. Installation window has detected the printer, and a second course contextual view displayed between PC and printer - steps 1-6. The process seems to hang on step "5 of 6". Then I finally get it.

  

  The 'help' was not very helpful here. Basically 3 options:

  1. Make sure the device is connected to your computer and turned on. Click on the "< back"="" button="" to="" try="">(I tried this - even doesn't have a result). "
  1. If the configuration of the device does not complete, some hidden configuration commands will be over. Click on the "< back"="" button="" the="" wait="" a="" few="" minutes="" for="" the="" device="" setup="" to="">(also tried - waited 10 minutes - still not)."
  1. If the problem persists, check the troubleshooting section in the Readme file, located on the CD-ROM. (printer is 6 years old. I don't have the CD. At installation of this download. If it was not very useful).

  So I you click on "next >" and received a message that basically says that the installation was a failure and I should try again or contact support manufacturing.

  PART D: I found an article on the forum to Support HP here: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officejet-Pro-8600-driver-not-installi... I followed BharathKumarK's long troubleshooting suggestion. did everything exactly as shown. No problem is. This does not solve my problem. I again ran MSCONFIG and passed my services and selections start back as they were before this troubleshooting. Once again, restarted my PC and started searching on Google and HP for more responses. Printer was still in "Troubleshooting" in Control Panel devices and printers (as in part B above).

  PART e: I found an article on the Forum of Support HP, who suggested to use the "HP Print and Scan Doctor" to solve problems. I have downloaded and installed on my PC. The program Ran. It considers the K8600 printer and I clicked to move forward. Then I get this message-

  

  I know by the failure of installation described in the PART C it was true - thank you for what is obvious. At this point I quit a job for a whole day solve this printer. Then... of course I click on 'Get Installer' -knowing full well it's doing nothing, most I've tried to do. Yet, I'm still as advised. Download the driver/software package. Followed the steps - even ONCE got to 5 from step 6 and hook - finally showing all the same mistakes as in PART C.

  PART f: now I'm suspecting there may be cord issues. I have a HP Officejet H470 in the closet. I have it pick up and borrow the very short USB cord of this printer. It is a USB cable that is supplied with this printer. I have disconnected the K8600 current USB cord and plug the borrowed cord -it was too short to reach my office upstairs. So I put on my laptop. It is also a processor 2 GHz Intel i3, 6 GB of RAM on Windows 7 Pro 64-bit (Service Pack 1) OS. I have connected the printer to the laptop. Open an regular Word document and print. It successfully to print! I thought I had found the question - faulty USB cord! # Because of the way that the printer is on the wall and the cord is so short, I had to unplug the laptop USB to the laptop. Now, I come back and try printing another document I needed - I think that it was something from the internet. I pick up the laptop and Plug the printer into the laptop. Send the print job, printer sounds like it is about to start printing and then... nothing. The printer power light begins to blink. So I tried the same basic troubleshooting - restart the printer, by restarting the laptop... etc. I have to unplug the printer from the laptop. Finally, received the fire of the printer goes in now the key 'X' on the printer while the power on the bike. For the moment no diagnosis is printed by the way. Now I Plug the USB into the laptop. Windows picks it up and tries to install the drivers... as in PART B above. Now I'm back in the vicious circle of the same question on the laptop troubleshooting. Which I followed the PART Aand PART B , PART C... .the everything with the same failure.

  PART g: Now I'm frustrated beyond comprehension. It's day 2 of troubleshooting! I need to get back to work. I decided to leave the only K8600. I have to turn on the HP Officejet H470 mobile printer. I plug in the laptop - as I still need to print a working document. Windows picked it up and I got the Windows Installer popup of pilots. Got EVEN COULD not install driver message described in PART B!

  BOTTOM LINE:

  I need a printer. Printers that I have in my office are now overpriced paperweight. I don't know if it's printer problem, cord issue, Windows 7 problem or USB port problem... but I need help. So I spent all the morning writing this as detailed as possible, in an effort to last stitch to beg for help! Someone at - it still reading this? I swore if someone suggests one of the steps I've already tried... I think I'll hit the roof!

  Thank you

  Benji

  @John_Getzke

  Your last solution doesn't work anymore. HOWEVER... I have found the solution in an IMPROBABLE PLACE!

  Was this morning in Microsoft Excel and clicking on enter far into my stats in morning, and strictly out of habit, I clicked to print. It gave me an error message that I had never seen. (photo here)

  

  So I googled "error message 'The domain Active Directory Service is currently unavailable'". I came across a Microsoft support forum: http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/when-searching-for-a-printer-i-get-error-the/e3681f75-93bc-4779-88e2-dd0e5192202a

  Someone on this forum (several entries) suggested something on Notepad.

  I thought that "it IS STUPID! IT DOES NOT WORK! "But what the 7734... I'll try it anyway... IT WORKED!

  SOLUTION

  1. open Notepad.

  2. under file > print.

  3. click on "add a printer".

  4. a pop-up window displays and asks if you want to set up a LOCAL or NETWORK printer. (Mine was LOCAL)

  5. Select the printer port (mine was USB001 (virtual printer to USB port))

  6. you continue and gives you choices for type of printer on the left (IE. HP, DELL, BROTHER, etc..) (Mine was HP)

  7. on the right, you select the model of your printer. (Mine was HP Officejet Pro K8600)

  8. click Next, and a prompt QUICKLY introduced me with (over quickly) status bar and went to options "Printer Name" and "printer sharing."

  9. the last prompt allows you to "print a test page.

  I clicked on the test page printed and was SUPER HAPPY here my printer immediately start printing! Boxes printing and notebook. I went back to my Excel file. Clicked on print and VOILA! Print like a charm!

  I really hope this helps someone else out there. I wish I could tell you why it works or what was stopping Windows and HP of the installation of the printer, but at this point, I really don't care. I CAN PRINT AGAIN!

  Thank you John for trying to help with this problem!

• H470 - cartridge problem

  Hello

  I have an Officejet H470 printer about 3 or 4 years. I had no problems, so far. I installed HP Solution center, which shows me that there is a problem with the print cartridge three colors. However, I bought a new (C8766EE BA3, HP343) cartridge, but the problem is still there. The message that appears now is "Print Cartridge problem" or "Incompatible print cartridge". I read and try some of your decision, but no one does help solve my problem. I hope you have new ideas to try.

  Hi Todorov,

  Thanks for the quick response.

  If this document did not help, there will be many other things I can offer for you to try. I recommend to call HP Support (the link is in my previous post) and find out if they can replace the cartridge or what other options they can offer at this point.

  Have a great day!