HP LaserJet 1518ni - Firmware update does nothing

Similar Questions

• OfficeJet Pro X451dw (CN463A): updated the Firmware says X451dw "EC Firmware Updater does not contain updates for your device."

  I'm trying to update the firmware on my HP Officejet Pro X451dw (CN463A), but the firmware update fails with the error "This Firmware Updater does not contain updates for your device." More precisely:

  1. With the help of EWS, I confirmed that my current firmware is very old (it lists the firmware version of BWP1CN1315FR, which means 1315FR, right?, dating almost the time I bought the printer about 3 years ago).
  2. I downloaded the firmware ("OJP_X451dw_R1640A_updated.dmg") was last updated, copied 'HP Firmware Updater' in /Applications and then he ran.
  3. It shows my printer in the Device Discovery list. I selected and clicked on continue.
  4. He thinks for a while, displaying "recovery information...". »
  5. After a wait of 30 seconds (approx.), it displays "EC Firmware Updater does not contain updates for your device."

  Any suggestions?

  You're welcome @justkwin.

  Here is the utility of a Mac computer:

  FTP://g4u0180.Houston.HP.com/FTP4/pub/softlib/software13/printers/pentane/OJP_X451dw_R1548A.dmg

  Kind regards

  Shlomi

• E260 keeps restarting, firmware update does not help

  Hey everybody

  So I'm trying to fix my Sansa e260 friends and I'll get in trouble. When you turn it on, it just continuously restarts itself, I've included a video of what he does. http://Tinypic.com/r/2wq78jp/6

  I have already searched through this forum and tried the firmware update, after the update exactly the same thing just keep to themselves. I don't know where to go from here, any help would be appreciated. Thank you!

  Formatting the device using the Recovery Mode.  This erases all the materials for the device, but it's locked up in any case.

  For this procedure, first of all we have this word from our sponsor:

  In Recovery Mode, do not USE NOT THE COMMAND FORMAT WINDOWS ON THE PARTITION RESERVED.  Use the trick of ONLY sansa.fmt folder!

  Well, here are the steps (features of version 1 only):

  • Start with your OFF e200.
  • Slide the HOLD switch to the right (orange list).
  • Open a Windows Explorer on your PC.  Use my computer or [Windows key] + E.
  • Press and hold the REC button on your e200 while plugging in the USB cable.
  • The Sansa will specify "Welcome to Recovery Mode, type MSD."
  • On the PC, you will see a new device labeled 16 MB FORMAT.
  • Double-click this icon to open the reserved partition.  Yet once, DO NOT format using the available Windows command!
  • Right-click in this partition and select new folder.
  • Rename it sansa.fmt folder and you're ready!
  • With the help of remove it safely function (icon at the bottom of your screen in the taskbar), eject the Sansa.
  • Slide the HOLD switch to the left.
  • Try turning your restored e200 once she gets in shape automatically.

  Let us know how it goes!

  Bob

• My computer seems to be frozen configuration updates. does nothing.

  My computer is stuck at configuration updates.  It is said stage 3 of 3... 100% complete.  Do not turn off your computer.  The computer has to be on hous.  I tried to reboot in safe mode, but it is up to the same message.  Pressing control alt dlelete does nothing.  I use windows vista Home premium.  I would really appreciate help with this.

  Hi Donna,

  Welcome to the community forums of Microsoft and thanks for posting the question. According to the description, computer is blocked to updates (3 of 3 100% full) configuration. We will perform some troubleshooting steps and try to resolve the issue.

  Method 1:

  Rename the Pending.xml file, and then change the registry.

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: (http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry ) how to back up and restore the registry in Windows)

  To rename the Pending.xml file, and edit the registry, follow these steps.

  Has) start Windows Vista and go to the system recovery options:

  1. Insert the Windows Vista installation disk into the disk drive and restart the computer.

  2. When you are prompted to restart from the disc, press any key.

  3. When you are prompted, configure the language to install, time and currency format and keyboard or options for method of entry that you want, and then click Next.

  4. on the page to install Windows, click on repair your computer.

  5. on the System Recovery Options page, click the version of the Windows Vista operating system that you want to repair, and then click Next.

  B) use the system recovery options to rename the Pending.xml file and edit the registry:

  1. in the System Recovery Options page, click on command prompt.

  2 type cd C:\windows\winsxs, and press on ENTER.

  3 type ren pending.xml pending.old, and press on ENTER.

  4. type regedit and press ENTER.

  5. Select HKEY_LOCAL_MACHINE.

  6. on the file menu, click on load the hive.

  7. look for the following folder:

  C:\windows\system32\config\components

  8. When you are prompted for a name, type Offline_Components.

  9. in the registry editor, find and delete the following registry subkey:

  HLKM\Offline Components\AdvancedInstallersNeedResolving

  HKLM\Offline Components\PendingXmlIdentifier

  C) exit the Registry Editor:

  1. at the invite command, type exit to quit the registry Editor.

  2. press on ENTER.

  3. click on restart.

  Method 2:

  Then try to install the updates.

  For more information, go through the link below.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista

  http://support.Microsoft.com/kb/949358

  Hope this information helps. Please reply with the status so that we can help you.

• LaserJet cp5225dn: laserjet cp5225dn firmware update is possible on network?

  I want to update the firmware on my Laserjet CP5225DN 2013. Instructions for downloading that the printer must be connected via USB. But when I run the exe firmware on my windows 10 desktop, it finds the printer on the network.

  I can possibly ruin my printer when trying to run the update of the firmware via the network instead of via USB?

  In order to run the update via the USB port, I have to carry the desktop PC to another from one end of the House.  All laptops that we have are macs, and the update of the firmware only works on a PC.  I expect a professional printer to be easier to manage than to require a USB connection, but I dream?

  Thanks for any help you can provide, as the warranty has expired for a long time.

  MJ - lee

  The instructions are as they are for a reason. Wired connection for firmware updates is always better. If wireless has been used and the wireless drop in the middle of the update, your printer can be roasted.

• HP Laserjet CP3525 Firmware update failure

  I tried to update the firmware on a HP color Laserjet CP3525 using a USB connection by following the instructions that were posted on the HP website for the update of the Firmware.  It seemed that everything was fine, but when the printer is restarted it never gets past 6/6 on the LED display screen.  I left the printer in this condtion for several hours and it never gets beyond this area. I guess the upgrade of the Firmware caused the printer to do a hardware failure and is not recoverable, but I hope someone might be able to help get this back to the top and work.  Any help would be greatly appreciated.

  Well, in general if the firmware update was interrupted for some reason any it would lead to this. This may be caused on the side of the computer (rebooting/logging out/end of the process until it's full) or the cord to which you are connected with, it is damaged in any way or not well focused in the USB ports.  I'm sorry you're in this situation, I understand that in a situation with limited spending caps, you would have legitimate to update concerns your other machines.

  If you have any questions or problems I or one of my colleagues are on this forum almost 24/7.

  I hope you have a wonderful rest of the week, Bob!

  -Spencer

• LaserJet 1525nw firmware update for macintosh

  HP LaserJet printer, 1525 NW

  Operating system Mac OS x Lion 10.7.2

  I received an email saying that I needed to update the firmware of HP. I have downloaded and run the Mac installer. It crashes when it tries to download the update of the firmware from the internet. There is no explicit description of the error - the installer simply crashes. What am I supposed to do? I tried to download has repeatedly where the first copy has been corrupted. The accident takes place always at the same point in the installation process of the firmware.

  You can try to download directly from here for some removable on another machine media (in case your mac acting upwards)? http://FTP.HP.com/pub/softlib/software12/COL34888/LJ-86474-6/CP1520_Series_FW_Update-20111215.dmg

  The above firmware update utility is for the HP Color LaserJet Pro CP1520 series.

  This utility runs on Mac OS X 10.5, Mac OS X 10.6, Mac OS X.

  The utility can be used with a USB connection or network. Don't forget to use the utility to update the firmware which is specific to your model of printer.

  This update is recommended for series HP Color LaserJet Pro CP1520 who has a firmware version prior 20110329.

  This utility updates the printer firmware version 20110329 (March 29, 2011).

  The version of the firmware of the "Setup Menu"-> "Service"-> "Firmware Datecode.

• LaserJet 4250dtsnl Firmware update failed, now shows "Send Update"

  I was updating several of our printers in a network using HP WebJet Admin last night and there was a (LaserJet 4250dtsnl - Q5404A) printer that had active print jobs that runs through, as the firmware has been updated.  In the WJA interface, the upgrade of the firmware hung 99% and the message on the control panel of the printer showed performing the upgrade.  Today we power cycle the printer.

  He is (was) a 500/stapler connected (Q2443B) sheet that displays now an orange light and we have received a message on the sign indicating 'FIRMWARE CORRUPT ACCESSORRY externally' and ' RETURN '.  I tried to update the firmware using HOSTS (although he showed that he already had the correct version).  Same result, hanged 99%.

  Power cycling the device and tried to update via USB using the easy update utility.  Once again, same result.  Engine turned off, unplugged the stacker, pulled the power cord plugged in, and the only message on the screen was 'return Upgrade.  I tried once more to send the update via the USB port, but the message "Upgrade to return" remains.

  I am able to print test pages, so the printing functionality seems to work, but I did have the chance to test with a variety of documents.

  As I wrote this, I found another thread that says: "go to peripheral configuration, system configuration, ramdisk, set it to Off" and try to update the firmware again to remove the message "Upgrade to return" (http://h30499.www3.hp.com/t5/Printers-LaserJet/Laserjet-4250-resend-update-after-firmware-upgrade/m-...).  I wonder if this can fix the damaged electric stackers.  Should I reconnect the electric Stacker before you make this correction, or anyone has any other suggestions?

  Thank you.

  While I did not set the stapler/bin, I was able to get rid of the message "Update of return" by the following steps:

  Turn the printer off
  Power to the printer, and when departures memory counting, press and hold the Stop button
  Wait until all three lights come on

  Press the green check button, then press the Menu key
  Scroll to clear all the errors of the RFU and press the green check button twice
  Turning the printer off, wait 10 seconds, then turn on the printer
  The poster printer now ready, but to be on the safe side, I did upgrade the firmware again via the USB port.

  Problem solved.

• HP P2055dn Laser printer. Firmware update does not work.

  HP P2055dn Laser printer. Win 7-64. USB is connected. Download the appropriate firmware update, ljp2055dn_FW_Update_20120131.exe. Running the file. Select the printer in the dialog box. Printer has been powered up and ready. Bar showed progress update was sent to the printer and concluded successfully, with a smiling face in the dialog box. However, printer doesn't react at all, just keep to indicate loan. When the Self Test / Configuration page, it always shows firmware like 20111214.

  Printer works fine. The update is supposed to fix a security hole.

  Found the answer on the support page for businesses. Buried in the Menu of configuration, to the terms of Service, the last menu item is RFU. This determines if the firmware can be updated. The default value is OFF and LOCKED. It must be put on updating the firmware. After update, it will automatically return to CLOSED and LOCKED.

  It would have been nice if HP put it in the manual, rather than trying to pay $35 for the support of something that should have been documented. Must be a secret or maybe I'm the only person who didn't know what that meant the RFU.

• The PRS - T1 firmware update does not complete

  EReader PRS - T1. Now that Sony's Reader store is closed, a new firware update redirects the reader to the Kobo store. Trying to do this update on the drive to fail with the "complete failure" message, tried again, not go. Tried on two different Windows 7 laptop computers and two different readers of PRS - T1. Both the same result. Where from here?

  I solved this problem, it's the latest firmware for the Sony Store closing.

  Sony did a bad job of coding, it does not check the space available on the drive. As the update needs to copy the updated firmware for the drive, the drive must exceed 100 meg free space to enable this. Two of my readers had less space to 100 meg. By removing some books in order to release the update about 110 meg proceeded until the end.

  Sony, get your coders education!

• WRT350N firmware update does not

  Hi, I just got a unused WRT350N router.

  I had a few problems getting the installer on my MAC (OSX 10.5.6), but it turns out that they have problems using Firefox have been resolved when I started using Safari. However, I still have a problem unsettled with the upgrade of the firmware...

  I want to upgrade the firmware the 2.0.10 original to the most recent available from 2.0.19. I downloaded this on the support page, which gives me a text from the Readme file and a. IMG file which I assume is the firmware file (all the instructions I found imply there should be one.) BIN file)

  I connected my router to the MAC using a wired connection and followed the instructions to upgrade the firmware (using the.) IMG file), followed the steps of rest (including using the hardware reset button and the option of software factory default values), but when the router comes back to the top still says its firmware 2.0.10.

  I don't get any error message and have noticed that at the end of the upgrade it does NOT display the «update is successful, restart...» "message.

  I have lived this several times with the same results. Any ideas please?

  I thank in advance.

  Don't worry have solved it myself!

  I printed off manual and found an obscure reference to Web pages only work with IE and Netscape and so given my previous issues with Firefox I looked up an old install of Netscape and hey presto the update worked first - didn't even have to reset the router! :-)

  I hope can be useful to someone else at somepoint.

  PS. I know this is a 'reasonably' old router by today's standards, but I question what type of programming is sitting behind the pages that it only works with IE & Netscape! I realize that you cannot predict what are the browsers will be used in the future, but come on!

• LaserJet CP3505: Hp Laserjet CP3505 firmware update is blocked at 6/6 A / F

  Tried to update firmware through Windows Explorer and an IP address. The printer does not complete the update, it hangs at 6/6a / F on the Panel of the printer. Even after the power of recycling, he ended by in even!

  Please help me get back the use of the printer.

  Do not use the button until the memory starts counting from the screen.  When you press the button wait until all 3 lights turn on solid to continue the procedure.

• Firmware update does not stick

  I have 2 450 GB Seagate drives (model ST3450857SS) in a server PowerEdge 2950 running Windows 2008 R2 with a PERC5 raid card.  2 disks are configured in Raid 1 and are in optimal condition.  I run the update package Drive_Firmware_V38WK_WN32_ES68_A07. EXE to update the firmware on the disks of ES02 ES68.  I get the message "The update completed successfully" and restart the computer.  Unfortunately, the readers are always the ES02 version.  What I am doing wrong?

  I found an alternative solution.

  I was able to update the firmware using the Dell Nautilus.  At the time of this post, the latest version is at

  http://www.Dell.com/support/drivers/us/en/04/DriverDetails?driverId=CVM50&FILEID=3156368750

  I have downloaded the exe file, extract the content, burned the ISO image to a CD and then used the CD to start the utility on my server.

• Device not recognized - the firmware update does not work

  I opened my package and am trying to get up and running.

  I have a 5 or 6 year, PC - computer Dell Pentium 1.8 ghz running Windows XP - SP 3 and Windows Media Player version 11.

  Plug in my Fuze v02.01.09A - I get a peripheral grateful error

  When I in MSC - my computer does not recognize device

  If I try to run the Sansa update - I get an error message

  "' The following error has occurred: *.

  Your device is in MTP mode (which is not the case).  It can only be updated in MSC mode.  Please disconnect your device and switch to MSC mode if you want to check the updates.

  *****************************************************

  If I go to device MTP - my computer recognizes that I have material foundNew and wants to use the hardware installation CD.  I put in the Rapsody CD that came with my computer and ask Windows to search for the installation of the equipment.  Install a window of Wizzard opens looking software flashing I have an MTP device is plugged in and I see the files to move via photo of 2 folders with files to move files from one folder to another.

  Followed by an error message

  that there was a problem installing this hardware.

  MTP device

  Teh device cannot start - (Code 10)

  Click Finish to launch a troubleshooting tool that can help you solve the problem

  *******

  Next, I get a window all over again.

  This day - the only thing I could do is get a few FM stations with a fairly weak signal.  The sound quality is good - but right now I have a $80.00 hockey puck who isn't even the right shape.

  -In addition, the unit had a load of 3/4 out of the box - and I've not been able to get the charge up at all - after be plugged for 2 hours to a USB port on the back of the computer.  I saw the bar to drop slightly to 10 minutes of FM radio listening.

  You have access to another computer? Try it may be your USB media. Try changing the USB ports on your pc. If its 5-6 years, you can have a port goes wrong.

• The F65 firmware update does not start

  Hey everybody,

  We have tried to update the F65 the last built (2.20) the other day, but without success.

  We had it before on another version (before v2); but now the camera would not recognize the update on the sd card. No matter how we tried (to extract the contents of the folder 'media' at the root of the sd card).

  We tried formating the card in the f65, copy the files on a mac. without success; formatting the card in the f65, copy the files on a windows machine. without success.

  Is there a backup how-to guide somewhere?

  Thank you

  Sam

  Well, everyone - forge on the F65 SD cards.

  I put the hand on a 1 GB Pro DUO Mark2 Memeorystick which instantly worked...