HP officejet J4540 all-in - ONE: fax

When you try to fax with my hp officejet J4540 all-in - ONE I hear the tone, the display shows fax is connected, but I get always a message "fax send failed". I ran a fax set up the test and everything passed. The question might be the telephone line in my house? Phone company put a new filter on the fax line and he sent a fax that day, but none after that. He always says "fax sending failed.

Hello

Please contact us. I understand that you are unable to send faxes from your printer.

You can follow the steps mentioned in the document.

http://h20565.www2.HP.com/hpsc/doc/public/display?calledBy=Search_Result&docid=emr_na-c01670414&docLocale=en_US

Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.* *.

Tags: HP Printers

Similar Questions

  • Why does vista install HP officejet j4540 all-in-one?

    Why does vista install HP officejet j4540 all-in-one?

    Hello

    Select your drivers vista from the link below

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3645094&LC=en&cc=us&DLC=en&lang=en&cc=us

    and follow the information here to know how to get started Setup etc.

    http://h10025.www1.HP.com/ewfrf/wc/product?product=3645094&LC=en&cc=us&DLC=en&lang=en&tmp_track_link=ot_we/prodlink/en_US/3645094/loc:0 & cc = us

    For more information contact the HP support

    http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us&lang=en&product=3645094

    or HP support forums

    http://h30434.www3.HP.com/

  • HP officejet 6210 all in one fax

    HP officejet 6210 all-in-one, fax not send fax with Vonage phone, I'm sure that most people have no problem, what should I do to fix this? Help, please

    I'm sorry that you are experiencing this issue. The fax works with Vonage, BUT it doesn't really work that well. This may sometimes work, it may not.

    Vonage is a (VOIP) Voice Over Internet Protocol. It has many transmitters communicate in both directions and can cause the interruption between the lines. You can try some steps, but it may not always work.

    1. go in the settings of your Fax

    2. change your Error Correction Mode (ECM) - OFF

    3 set the fax speed to slow DOWN

    Make sure it is properly connected.

    1 LINE 1 at the rear of the printer goes directly to LINE 1 of the Vonage modem (or wall plug)

    2 LINE 2 goes directly to the phone.

    Hope this helps. Let me know what happens.

  • HP Officejet J4540 All In One: Why can't check my ink levels on my officejet J4540 with windows 8.1 installed on my computer

    I want to check on my printer ink levels, but there is no way I can see to do since I installed

    Windows 8.1 on my computer. There must be another way to check it out, but I can't figure out how.

    Hi @sneakers1491,

    Welcome to the HP Forums!

    I see you're wondering how to check the ink with your HP Officejet J4540 levels. I'm happy to help you!

    First of all, I recommend going through this guide, check the ink levels for HP Officejet J4500 and J4600 all-in-One Printer Series.

    If this does not work for you, on the printer itself, press the key icon in the upper right corner, it will take you to settings, then continue to press the right arrow until you see print report, then press OK. You will see the self-test on the screen, press OK again. Will display the test page, and then you will see the level of ink on the printed page.

    I hope this information helps!

  • HP Officejet J4540 all-in-one

    I have a printer all-in-one HP Officejet J4540 using 8.1 Windows 64 bit.  I downloaded the recommended driver full features and that did not help.

    When I try to print certain documents (the airline tickets), the ancestry.com census results, etc. it does not print the necessary document.  It prints other things on the page, just not the document to be printed.  It will also print at the bottom of the page the source of the documents.

    Any help will be appreciated.  This all started when I got a new computer with Windows 8.

    Hi @cga71 and welcome to the Forums of HP!

    I see that you are having problems printing.  I would like to help!

    What internet browser do you use?  I recommend trying another browser, like Firefox, Explorer or Chrome.

    I recommend then perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

    I suggest also download and run the HP print and Scan doctor.

    Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

  • HP 5740 Officejet all-in-one: fax will transmit well if the ink level is low

    Can fax you on HP Officejet 5740 all-in-one when ink levels are low with a good result?

    Hello

    Ink level low don't effect function fax, BUT if a level of ink is exhausted/empty you cannot use the fax because the printer stops during warm-up.

    Kind regards.

  • Impossible to scan, fax, or copy of HP Officejet 6500 All-- E709a One in

    I can print from my HP Officejet 6500 All - in - One-E709a, but I can't scan, copy or fax.  All drivers and updates are underway; No recent updates have been made before the problems that occur. I use Windows 7 64-bit.  When the printer is turned on, it still shows Original charge, but no documents are in the charger or on the glass (I already cleaned the glass and have ensured that the lid is tightly).  I have problems to scan, copy and fax. The automatic document feeder works.  I tried to reset the printer several times.

    When I try to scan a document into the document feeder (it feeds through) or from the glass, I get varying answers - rarely, he asked well how I save/handle the doc (e.g., save them in pdf format), but the document does not actually scan and I'm headed to reload the document OR it displays no. Scanning Options. The document does not appear in my analysis.

    When I try to copy, it shows the document as copy, but there is a long delay before the progress bar occurs.  When I copy using the document feeder, I actually get a copy (rarely and always disappeared - looking) or copy prints white - two results are always followed by an error message to reload the document.  When you copy from the glass, the copy print in white with an error message to reload the document

    The same problems occur when you try to Fax.   If trying to scan, copy or fax, the printer does a lot of gears whirring noises.

    Again, I can print a document from my PC without any problem, the problem is limited to scanning, faxing and copying.

    I tried the doctor of printing & scanning HP.  It always stops at the HP Twain scanning stage, saying that the scanning process was cancelled by the user (not true).  When I click on continue, it proceeds to the stage of Test analysis, but nothing happens when I click the button of Scan Test.  It only will allow me to ignore at this point.   All the other steps show green checks.

    My first question is really going to reach the merits of the case, I heard you say that the printer produces noise, but if you lift the bar A) trip through the screen and the light cover B) up?

    In addition, perform both of these resets and I would like to know how they are!

    All-in-one HP printer reset - HP Officejet 6500 - YouTube'

    Have a great day!

  • Officejet 6310 all-in-One: can't send faxes from the computer screen

    We use an Officejet 6310 all-in-one printer. Computer of my wife, a laptop Toshiba Satellite Windows 7 Professional, has suddenly come to the point that it will no longer send faxes from the computer screen. We get an error message that something must be installed or reinstalled. We have lost the CD of the software provided with the printer. We can send a fax if we have a document printed to power the machine, and we can print faxes. We lose a lot of paper and ink because of this problem. Help, please.

    Hi GregsterMc,

    Given that the Fax icon is not displayed in the window of printers and devices, you need to uninstall and reinstall the software again. This should solve the problem.

    Thank you.

  • Fax/scan without a phone with officejet 7410 all-in-one line

    I have an officejet 7410 all-in-one and UNPLUGGED my phone line at home. How to download software in order to fax/scan items? I get the message error is "you must install or run HP software for this feature.

    Here is a link that will help you with that.

    http://WWW8.HP.com/us/en/support-drivers.html

    1. Enter the name of your printer DRIVERS AND SOFTWARE

    2. choose your operating system

    3. then, when he asked to SELECT A DOWNLOAD, choose the software FULL of FEATURES.

    Let me know if this can help, thank you.

  • I have a HP officejet J6480 all-in-one printer. The screen is white and yellow light flashing

    I have a HP officejet J6480 all-in-one printer. The screen is blank and there is this little yellow light flashes on the Cancel button.  I can not print or fax anything because the screen is empty. Since the light started to Flash the entire printer has not worked. Can someone please HELP! : womansad:

    Well, if you haven't tried this and then create a coercive power reset:

    Do not activate the wide (although you can), remove the power cord at the back of the printer. Wait at least 30 seconds, then reconnect the power cord to the printer. Turn on the printer. If that clears up the flashing light/white screen, then try printing etc...

    If this is not the case, see if something visible is originally the error state such as paper jam, odd items in the printer, nothing fancy. Also try to plug the printer directly into the wall outlet as opposed to a look/power surge Strip, or even try a Jack in another room if it is not successful.

  • OfficeJet 7210: HP Officejet 7210 all-in-one works in Windows 10

    Anyone have any suggestions for my situation?

    I have a HP Officejet 7210 all-in-one I've had for a while. (It works fine all this time).

    My last computer was (that is, starting to act a little "ginchey"), it was time for an upgrade... So I went to one 64-bit Dell to another.

    The 7210 worked well on my last Dell, but I can't not all software (scanning, printing, fax, etc.) to properly install from CD (obviously older version of the operating system). HP website for updates of pilot is kind of useless (they appear to have abandoned this machine, no longer support).

    Here's the rub: old pc was running Windows 10, new machine runs Windows 10.

    Any suggestions people out there?

    Frankly, if I'm just a victim of HP 'ripping off' supported by an operational device otherwise, I think go "elsewhere" for my next printer if I have to upgrade.

    Kind of sad, I used to be a big fan of HP over many years, but their current support, products, etc. are leading me to look elsewhere these days.

    Thank you for everything, for support, ideas, suggestions, etc.

    MC in Albuquerque

    Hi @mc-albuquerque.

    Download and install the following software to complete functionality to use Officejet 7210:

    http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

    Please let me know if you run into difficulties.

    Shlomi

  • HP OfficeJet 7310 all-in-One used to have the support of .pdf. Under XP. Have a legal version of Adobe 9.

    HP OfficeJet 7310 all-in-One used to have the support of .pdf.  Under XP.  Have a legal version of Adobe Acrobat 9 Standard.

    Will have problems with the printer fax function.  Has chosen to re - install the software disk.  Came across all sorts of questions.  Downloaded the latest drivers for 7310 / XP.

    Now the .pdf is not available.

    List of available options: HP Imagzone Express, e-mail, Microsoft Word, Paint, Microsoft Photodraw, Adobe Photoshop Album 2, Adobe Photoshop, Microsoft PowerPoint and save to a file.

    Used to have Adobe Acrobat.  He want to come back.

    Hello

    My suggestion: scan of Acrobat, it is much easier to control. Simply open Acrobat, create the file from a scanner.

    Kind regards.

  • OFFICEJET J4680 ALL IN ONE PRINTER does not print after installing Windows 7

    THIS HAPPENED MORE THAN A MONTH. I STARTED WITH WINDOWS VISTA. HP SUPPORT ADVISED LATER FOR THIS WINDOWS 7 WORKS BETTER FOR MY PRINTER. NOW I HAVE INSTALLED WINDOW 7 AND I GOT THE PHONE SUPPORT TO GO ON MY COMPUTER AND SET IT UP. EVERYTHING WORKED AS SUPPOSED, PRINTING, SCANNING. THE NEXT DAY I TRIED TO PRINT SOMETHING AND I WENT BACK TO SQUARE ONE. The SCREEN LIITLE ON THE PRINT JOB CAME AND SAID THAT the PRINTER does NOT PRINT. I WENT TO THE HP SOLUTION CENTER AND A NOTE SAID THAT THE PRINTER IS DISCONNECTED. I RETURNED AND COPIED MY NETWORK CONFIG. AND THE WIRELESS TEST. EVERYTHING IS RUNNING WELL HUNG OF THE PRINTER. THE DEFAULT PRINTER IN THE RIGHT IMAGE. THE ONLY THING I NOTICED WAS IN THE PORT AREA. UNDER THE WINDOW VISTA, I GOT TWO PORTS. ONE WAS FOR THE PRINTER AND OTHER FAX. WHEN THE HP PRINTER HAS BEEN REINSTALLED, I DON'T KNOW IF IT STARTED WITH ONLY ONE PORT. THE PORT IS ENABLED BY IT AND HAS THE FAX FROM WORD TO THE END ON WINDOWS VISTA, BOTH PORTS HAVE THE SAME INFORMATION, EXCEPT A EU FAX OF WORD AT THE END ANY HELP ON WHAT SE PAST.

    I JUST INSTALL WINDOW 7, MY OFFICEJET J4680 ALL IN ONE PRINTER. NOW IT WON'T PRINT. THE DAY BEFORE, IT WORKED.

    Hey 123 problems,.

    You will need to go to the HP website to download the latest software/drivers for your printer on Windows 7:

    http://h10025.www1.HP.com/ewfrf/wc/product?product=3692888&LC=en&cc=us&DLC=en&lang=en&cc=us

    I hope this helps!

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Where can I find drivers for HP officejet 4215 all in one printer

    Please can someone help provide me the driver for hp officejet 4215 all in one printer... I have tried severally to download from the Hp support center but no luck... Thank you very much

    Original title: DRIVER of PRINTER

    http://support.HP.com/us-en/product/HP-OfficeJet-4215-all-in-one-printer-series/351105/model/351107/document/c01796879/

    HP print driver printer - install and use the built-in Windows

    This document is for HP printers that do not have a driver of HP full features for Windows 10, Windows 8, Windows 7, or Windows Vista.
    If a full features of HP driver is not available for your printer, you must install the print driver built-in. A complete driver functionality for one or more versions of Windows is not available for your printer, either from the CD that came with your printer or the site HP Web.
    Where is the download button? HP print driver is integrated into the Windows operating system or installed through the Windows Update function on your computer. You don't need to download anything from a Web site to print, scan or fax.
    See the frequently asked questions in this document for more information, including how to scan using this driver.
  • Can someone help me configure HP Officejet 5600 all in one set with windows7 operating system

    How to use HP Officejet 5600 all in one set with windows7 operating system

    I have a desktop HP Pavilion with Windows 7 Edition Home Premium & I want to connect my HP Officejet 5600.
    I get the "not compatible with your operating system" message shortly after insertion & the disc from the printer running. Is someone can you please help me solve this problem. Thank you... Jim

    Everything is now up & running.
    Thank you for your help attempt Distinguished Professor, my 4 step method of resolution is shared as

    According to HP Print and Scan doctor, I have the 5610.   My manual says only 5600

    I just finished successfully installed the full OS & drivers by following these steps.

    First of all, (with the disc of the operating system still in drive E, but not running)

    Connect the printer to the computer and allow it to be recognized and automatically download all the drivers.

    Download 2nd & printing performance HP and doctor Scan http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/en/hho/ipg/forum/printer_diag/&softwareitem=mp-123407-2

    3rd download & run HP printer Install Wizard for Windows7 and 8 http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/piw/&softwareitem=mp-122330-1

    Once all this has been ran & finished, my DVD RW Drive E automatically started the drive & added all the options of the printer & features for printer, Scanner, copier & fax. Everything is now up & running.
    Thank you for your help attempt Distinguished Professor

Maybe you are looking for

  • iPhone 5 s straight talk activation outside the us.

    Dear friends, I bought the iphone 5s Walmart on Straight Talk. then he brought in Bangladesh without activating it. now, I can't activate it. of course the straight talk is not available in Bangladesh. so, what are my options? I tried to activate it

  • Reminder of EPICS and an array of strings

    Hi guys,. I'm diving into EPICS of LabVIEW server for the first time and I have a few questions. 2013 LabVIEW DSC module takes as a reminder of the EPICS? the only reference I can find is a document of 2005 where it has not taken in charge. EPICS als

  • WHERE ARE MY SHORTCUTS?

    Hi allI have seen too many people with the same issues now and still more hack remedies to try to solve, reset preferences, diverted from the preferences, the settings of Firefox , etc...What's done to address these problems of missing shortcut?  Thi

  • What tool flow will be fix?

    https://www.Facebook.com/Photoshop/posts/10153377423999685PS dear CC 2015... Since your last update "your great and useful"... LIQUIFY tool no longer works! so what happens! will it trouble any time soon? It is not possible that your tech guy do not

  • Ingestion with Adobe prelude problems

    When I select say two clips in a folder given to ingest and stich together. Then I go to another folder, select another item, the first two selections are no longer there. In summary, you can select several clips from a single folder at a time, not d