OfficeJet Pro 8600 more Scan to the computer

Similar Questions

• OfficeJet Pro 8600 Plus: Scan of the computer does not work with Win8.1 [solved: problem with USB3 Boost]

  Since I have installed 8.1 (pro), I can't use my 8600 software Pro for scanning the computer (via USB). It seems that there is no communication with the printer regarding the scanning software, but printing as usual.

  Tried to use the HP printer Assistant: when I click on the button "scan a Photo Document or", I get a message "inaccessible Scanner. Also restarted the printer.

  When I try to scan from Photoshop, the system first finds the printer, but it fails to connect.

  Update HP says that my system is up to date.

  HP Print and Scan Doctor 4.2 concludes and tells the printer on the welcome panel and seems to be able to communicate with him, up to a point.

  It gives me a error 'pilot' (sorry if is not called in English - he takes over my keyboard language, which is French and says "Pilot error") and says that no communication could be created between the printer and the driver for scanning, and I have to restart the computer...

  So I did and revived the software of the doctor, who gave me the same error message. This time, I clicked on 'Ignore' and let things. He ran a "Scan" Test twice and said that everything was going well or had been repaired. But strangely nothing on the printer during these 'tests '. And in the end, as he offered to do a scan test myself, I clicked on OK and I got the error message "inaccessible Scanner" again.

  Then I did my scans on a USB key, as I have done a few times already, and has gone very well. But I'd be happy to have this function "Scan to computer" back. How?

  Thanks in advance 23. It is resolved! See to the end.

  I use McAfee (All Access - Total Protection). All green. I did some research using 'Paint', 'Windows Fax' and 'Scan' and checked all the results using McAfee: 'does detect any items that require your attention.

  Here is a series of screenshots when you run printing HP and doctor Scan:

  

  

  I click on "Scanning troubleshooting..."

  

  I click on 'Ignore' right now because I know now that a restart will not help, but I have already tried (see my first post).

  

  

  It seems that the problems have been repaired. And if I click on 'Scan Test', it seems too good, initially...

  

  But if I go on and click on "Scan", bye bye:

  

  Everything is the same as the first time, as I remember.

  I checked services: dependencies are OK (RPC is in the WIA Service dependencies). Both services are "Running" and "automatic". I stopped and restarted WIA. No change.

  I launched a sfc/scannow:

  

  Before that, I changed the USB (a new one): no change.

  AND THEN: I unplugged the USB cable connecting the port (USB3) standard (directly on the rear panel of the motherboard) and plugged into a PCI USB3 card. And all was well with the scan.

  Do you think this says something about my motherboard (Asus X 79 Deluxe brand new) or on the Officejet?

• Need help to set up officejet pro 8600 and scanning to the network on OSX Lion folder

  Hello

  I'm trying to implement my Officejet Pro 8600 more scan to a network under OSX Lion folder.  I have correctly set up the printer otherwise (and can scan and flown from my Mac).  I created SMB sharing as described in the documentation.  My only question is what to enter in the Web server of the printer when it asks for the network path of the shared folder.

  For example, I have the following shared folder:

  / Users/me/Documents/scans/Durable goods received

  on my computer that has name is:

  My iMac

  has an IP address:

  172.16.1.4

  wonder web server of the printer a network path (for example: \\mypc\sharedfolder) but I do not know how to translate my way above in the correct format.

  I tried the following:

  AFP://172.16.1.4//users/me/documents/scans/durable------Goods\ recipes

  but he doesn't like it.

  I also tried:

  Recipes of \\172.16.1.4\Users\bvz\Documents\scans\Durable of goods.

  Nothing helps.

  Thanks for any help or ideas!

  Hello

  First of all, make sure to install the latest firmware for the printer.

  SMBX (used by Lion sharing protocol) support added lately, and the device fails to access any forlder Lion shared with an older FW version:

  http://support.HP.com/us-en/document/c02919168

  You have shared the folder durable goods received ?

  If so, I guess the correct path would be as follows:

  \\172.16.1.4\Durable goods received

  Please let me know of any changes,

  Shlomi

• My OfficeJet Pro 8600 more returns "not recognized computer" when I scan from desktop computers.

  My 8600 OJPro more has been configured to recognize my Dell computer.  What settings should I on my computer for the printer OfficeJet Pro 8600 more allow scanning from my Dell desktop?

  I would try to run printing HP and doctor Scan first to see if the problem can be solved with this automated tool.  Click here to access the tool.

  Thus, there are measures to check the WIA service:

  (1) type services.msc in the section run or search programs and files

  (2) scroll the WIA: Acquisition of Image Windows service

  (3) to ensure that this service is running.  Click on stop, and then restart to ensure that the service is running properly

  (4) restart the PC to see if WIA will resume functionality

  (5) check the properties (right click on WIA) 2 dependencies are defined

  (6) check to make sure that the remote procedure call (RPC) is running

  (7) check the detection equipment core and make sure that this forum works

  Let me know how it goes.

• How can I get my HP Officejet Pro 8600 more to send the scanned item directly to e-mail?

  I just moved to the top of a new HP Officejet Pro 8600 more a HP 6500 printer.  On the old 6500, it gave me the choice to send the scan to my email, however, that option is not available for me on the new scan of 8600 software.  How can I add email to my choice of where to send the scan?

  Thank you...

  Hi NICOLI12,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that you want to know how to scan to e-mail.

  I'll be happy to help you.

  You should be able to analyze through the scanning software HP to e-mail can also scan to e-mail from the control panel of the printer. I have provided a document to find out how Scan.

  Hope that solves your problem.

  If you are on Mac, please let me know.

  Thanks for posting on the HP Forums.
  Have a wonderful day!

• HP Officejet pro 8600 more scan-to-Email problems

  Having a printer above, connected to my network through a static IP address. Interruption of the connection some time after the firewall on the pritner ago was accidentally tunred on and corrected cela by restoring the defaults on the printer control panel. Restored the connection via the EWS cnda wireless printing now laptop, PC and mobile devices all via the wireless.

  It, scan to e-mail settings are exactly as they were before the occurrence of the problem with the firewall (when they worked very well), but now do not work - EWS fails when he tries to test the parameters of ASNA to electronic mail. I use the standard server outbound smtp and port 25 as advised by my electronic internet/mail provider, but nothing helped.

  When I try to activate ePrint, I get a similar message: "unable to connect to the server.

  Is there something that I need to reset or reconfigure the printer?

  Concerning

  RedRoscoe

  Hello RedRoscoe,
  
  I would like to see if I can help with the Officejet Pro 8600 Plus scan to E-mail and Web Services questions. I think that the issues can be addresses by two steps, I hope.

  About scanning to E-mail, you can be blocked by the two-step verification. What is the email client that you want to activate the printer for, MSN, Gmail, etc.?

  Issues of Web Services, try to apply a manual DNS 209.244.0.3 & 209.244.0.4 to the printer's manual I.P address.

  See you soon,.

• HP officejet pro 8600 more random print the unreadable text

  Hello

  I have a problem with a newly acquired HP officejet pro 8600 N911g. When you print the document, some pages are filled with unreadable text instead of the original text (e.g. ' eft! bdujtop! dpssf-wcy TPQ! QSF"). It happens whenever I have print the same document, and sometimes on a few lines of certain pages.

  When the same issue occur on the same page, that's exactly the same gibberish (so it isn't random text).

  Here is an example of an impression goes wrong in the middle of a page.

  The printer is plugged in and the PC is wireless.

  I tried to launch HP print and scan of the doctor, he did not find any problem.

  He tried to print with another PC, same problem happened. My OS is Windows XP with SP2 32 b.

  The printer model number is N911g, the product number is CM750A and the number is 22241.

  Any advice would be helpful.

  Thanks in advance.

  Normally, this means that there is a problem with the radio wireless on the router. It may work fine for everything else for now, but it could be losing signal slowly, that would not be noticed by most of the things until the signal was almost gone. Signals of printing and scanning signal, for some strange reason, I've never even had explained to me, get back on it lose everything first and suffer the worst. I try to search for the firmware updates that may be available for your router, as it may just be a firmware issue that causes a light signal lose. If that does not resolve the problem, I would look in get a new wireless router.

• HP OfficeJet Pro 8600 no FAX OF the COMPUTER

  Hi, when trying to fax from the computer, apparently nothing is happening...

  Steps-

  Intended to document on screen

  Select Print

  Choose printer 8600 FAX

  Dialog (seems even PRINT)

  After hitting OK, nothing happens.

  I assumed that the box should appear asking where I want to send either right when I select print via 8600 Fax, or right afterwards?

  Works ok / can fax directly from glass all-in-one.

  A ran utilities print and Scan doctor and says that everything is ok. But does not list the FAX as a separate printer.

  When I check the fax under devices and printer, no documents are in the print queue.

  Suppose he need some sort of update driver or reintall?

  Running Windows 7, 64 bit.

  Thank you!

  Hello

  See the link below.

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/want-to-send-fax-from-PC-in-HP-OfficeJet-4500-all-in-one/TD-p/1443895

• OfficeJet pro 8600 more: officejet pro 8600 more scan black

  HP officejetpro 8600 more

  8.1 Windows 64 bit up to date drivers and firmware, reinstalled all the software of hp.

  When copy/scannig color works fine, copy/scanning in black and white it shows/prints all black

  Problem solved after a relocation complete, I disconnected the power to the printer and outlet for 1 minute.  in him plugging back into the printer became a realignment and now in color and black and white copies/scans without any problem.

• HP Officejet Pro 8600 more - Scans cut and distorted

  Recently purchased this machine - I use the HP scanning application that comes with it in which you set the settings, scan and then send it to a folder on the computer. It worked fine until today.

  Now when I scan everything (on the bed) - it previews fine - I send it to a folder - but when I open the original file (in photoshop) it is stretched and cut. I tried reseting the parameters (resolution, orientation, culture, etc.) and also to restart the machine, but it always records the distorted image and cut.

  The only thing I can think of that has changed is I have updated my OS to the Mavericks.

  Anyone have this problem? The associated bones or have I missed something.

  -Adam

  Generally, we expect updates to driver for the new operating system that just came out. I recommend to visit the HP product page: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&product=4323659
  for any download for OS 10.9 and waiting, check the update of software Mac or App Store.

• OfficeJet Pro 8600 more. No menu auto scan when loading documents in the ADF?

  I have an Officejet Pro 8600 more again to replace the L7780 who brought up the menu scan, when a document is loaded into the autofeeder.  How can I get the only 8600 to do the same.  I find that I liked the convenience of the automatic menu, but it does not come to the top when I load the document (s) to scan in the ADF.  This feature has been discontinued?

  Thank you.  I do enjoy the printer but miss this feature that I scan all my documents in my computer to avoid to keep a lot of paper.

• "Scan To E-mail" configuration on HP Officejet Pro 8600 more N911g

  It's the same problem reported by several other users of this forum to which no solution has been provided.
  
  I was not successful to set up the scan e-mail option for a HP Officejet Pro 8600 more N911g bought 12 August 2012 and using CLP1CN1150CR firmware.
  
  I'm trying to do through the interface of the Web server built into the printer from an iMac running Mac OS X 10.6.8 and the 5.8.0 HP utility.  More specifically the page under 'outgoing Scan-> Scan to E-mail-> e-mail profiles.
  
  I tried 2 SMTP from different servers, each one works well to send the email from the computer: Apple iCloud mail service (formerly Mobile Me, formerly known as.) Mac) and AT & T Net messaging service.  I checked the server name, port number, and authentication login and password were all correct.
  
  When scanning to email serves as the printer, I get an error message: unable to connect to the server.  Check the address and the name of the server.
  
  During a test of the computer when configuring a profile of outgoing mail, I get an error message: the device was unable to send the test e-mail message. (EmailAccounts-timeout).
  
  When I try to configure the page under "Settings-> E-mail Alerts-> mail server" and use exactly the same values as those in the e-mail profile out above, registration and Test option fails with an error message: the device was unable to send the test e-mail message.
  
  Oddly enough, I am able to use the client to the computer with the option scan to the computer-> e-mail in PDF format or by e-mail in JPEG format.  With this option, the file is scanned and added as an attachment to an e-mail message from the Mail in Mac OS X client.  The e-mail message is sent via SMTP server even when I press the button send.
  
  All the error messages seem to indicate that the client software of electronic mail of the printer is unable to establish a connection to the SMTP server.  However, it is unclear what configuration setting is one that could be the cause of the problem.

  After further research, I noticed that there is another default possible values of port Simple Mail Transfer Protocol (SMTP):

  • Port 25 is the standard SMTP port number.
  • Port 465 is the number of SMTP over SSL, Secure SMTP (SSMTP) port.
  • Port 587 corresponds to the port number dedicated for a presentation Mail (MSA) Agent that uses a variant of SMTP, as specified in RFC 6409, which requires that clients are authorized and authenticated to use the filing of mail service.

• How can I get my HP Officejet Pro 8600 more to scan a full legal size paper?

  How can I get my HP Officejet Pro 8600 more to scan a full legal size paper? He cut scanning letter-size, but the specifications say it will scan the legal size.

  Hello

  The analysis of parameters need to be changed to HP Scan App. launch of the HP scan application from your computer and select the option left (PDF or JPEG...) and then choose the size of legal scan on the right.

  Save and close the application.

  Now you can scan in legal.

  Note:

  You can also create your own settings for scanning HP scanning parameters.

  Good impression

  Evelyne

• HP officejet pro 8600 more: double side id or copy scan

  Hey,.

  I have hp officejet pro 8600 and I'm unable to scan or copy id cards on both sides.

  y at - it an option for scanning on part and other identification cards or copy bothh sides of ID card?

  can you please help me with it, because I really scan identity cards, the two side to my computer.

  "" and if there is no video or tutorial on scannig or copy on both sides of the identity card for "hp officejet pro 8600 more ' and then share it with me.

  Thanl you.

  Hi @Sanky1,

  While the document feeder allows the 2 sided copy and scan, the loader will feed not IDENTITY cards. What you can do, is copy each side individually, then put two copies on the document feeder and scan 2 faces. If you want both sides of the card on a single page, same idea, copy both sides individually, then place them copies on the glass to scan so that they are aligned with a scanned page.

  I hope this helps. If you need further explanation or assistance, let me know.

• HP Officejet Pro 8600 more black vertical line when copy or scan

  HP Officejet Pro 8600 more black vertical line when copy or scan everything in the middle of the page

  Hi Clementstl,

  I understand that you have a 8600 Pro Officejet which puts a black vertical line in the center of your copies/scans. I'm sorry to hear you had to deal with this, but I will certainly do my best to help you solve this problem.

  I recommend the rest of this document of vertical stripes, lines or streaks in the Copies, faxes or Scans as it should be in a position to help to cross that line. The most common cause is a small spot of something on the glass of the scanner, so just make sure that when you're cleaning use you as much elbow grease you can collect

  Just to clarify a little further, if the problem only seems to occur when you use the automatic document feeder, you'll want to focus your attention on the small strip of glass that he uses on the left side. If it only occurs when you use the flat glass, you want to concentrate on the large piece of glass he uses.

  Hope this helps, have a nice day!