HP Officejet Pro 8600 Plus - how to turn off "drying of the ink?

Similar Questions

• HP OfficeJet Pro 8600 Plus: how and where can I find the year of the printer? HP OfficeJet Pro 8600 more

  How can I get the printer HP OfficeJet Pro 8600 year more?

  I looked in the staus report printer and the different labels I can find on the printer itself. I don't know that I just lack.

  I bought it new, so I have no reason to suspect that the information has been removed before purchase.

  Thank you

  The printer status report has 47 online date (rounded to the week) the print head has been installed.  Except in rare cases where that the printhead has been replaced, this would be the date of the printer has been installed.

• OfficeJet Pro 8600 Plus: I have a top loader of the OfficeJet Pro 8600 Plus page works do not?

  The top loader will feed is out of paper. He reconizes that he delivers here but it will not feed... making the noise, but do not feed. Can I do to fix? I cleaned the rollers with alcohol.

  Hey @HandymanConnect,

  Welcome to the Forums of HP's Support.

  I see that you are having problems with the document feeder in your Officejet Pro 8600 more e-all-in-one printer. I can help you with that.

  First, I will mention that the cleaning of the rollers with alcohol has the opposite effect you hope. As the rollers of the printer depends on rough grip on rollers, with alcohol will break the rollers and damage to the printer. Instead, HP recommends to use water to clean the rollers and other components inside the printer.

  That said, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, this document explains How to solve problems of choice with your document feeder.

  If after following the above, you are still not able to use the feeder, the printer must be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know the results after following the above. If you are unable to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• OfficeJet Pro 8600 Plus backup device settings fails and hangs the printer with the CKP1CN1322CR firmware

  When I was with the built-in webserver (EWS) to perform a backup, I get a message saying: "Year Error Has Occurred" and the printer would just lock up and flash lights and compel me to press the power button on the printer to reset.

  I've done a few shrinking down and discovered that this happens only when the Scan-To-Email are selected to be included in the backup. I then discovered that it only happens when I have the email set to a (compressed) PDF Document Type Options.

  I was able to get the backup to succeed by changing the options of Scan - To - Email Email Type of Document to PDF instead of PDF (compressed), then the backup succeeded.

  In this case with the latest version of the firmware: CKP1CN1322CR.

  Here's my printer information page (this could make this message other users to find more easily):

  Product Name   HP Officejet Pro 8600 N911g
  Product Model Number    CN579A
  Service ID  23220
  Firmware Version    CKP1CN1322CR
  Country/Region  USA
  

  I couldn't find a place to submit a bug report, so I hope that this information gets to the right people.

  Hmm, I tried this on my 8600 more Offcieejt and can confirm the same behavior, even though I have the firmware CLP1CN1322CR.  I'll forward a link to this topic to some folks at HP who can be able to focus on this.

  Nice work tracking down the details to replicate that.

• HP OfficeJet Pro 8600 Plus: How can I change head to head copies copies?

  With regard to copies: How can I change the setting on my 8600 officejet pro more to make double-sided copies to make copies front?  I can't find anywhere on the display panel for this task.

  Hey @dave_sitoski,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I see that you encounter some problems with the evolution of a parameter of copy on your Officejet 8600. I can help with that.

  To do this, we will do the following:

  1. Click the copy on your printer.
  2. Next double click on the button.
  3. Select Original a front one-way copy.

  Which should allow you to make copies front again.

  If this resolves your problems so please let other users of the forum know clicking on accept as Solution below my post.

  I hope this helps and I hope you have a great week!

• Maverick incompatible with Officejet Pro 8600 Plus

  Maverick update os x 10.9 is incompatible with Officejet Pro 8600 Plus.

  1 PDF files from the Web pages are black and show no information when I try to print from any browser.  Must take snapshots of Web page and print from that

  2 info printer shows that it is still printing when it is finished and will not move forward to the next task

  Help, please!  I see that there is no HP software update to resolve this issue and am confused why you didn't do your printing software compatible with a huge update of Mac.

  

  Hi podisc,

  Thanks for the quick response.  It is good to hear that you can print, it's at least a start.

  I know that you have not received the error messages in the document, but the behavior you describe leads me to believe that the software did not completely uninstall or install completely with the driver for the Mavericks.

  Please follow the steps listed in the document below and let me know how it goes.

  An "unsupported Operating System" or "Software is not compatible" message on a Mac running OS X v10.9 Mavericks "

  http://support.HP.com/us-en/document/c03976994

• How to set the Date and time on my HP Officejet Pro 8600 Plus?

  I have a HP OfficeJet Pro 8600 Plus, and I would like to know, how can I implement the time stamp that is under my printer display screen continually Jan 00 00 00:00 a.

  Thank you

  @misslady,

  HP has gone green, here's the guide you're looking for.

• How to change the language on a HP Officejet Pro 8600 Plus

  I got a new HP Officejet Pro 8600 Plus and chose inadvertently Russian rather than English language. How can I change it back to English? I read the other posts on this topic, but they were for different models of printers and the instructions don't work on my 8600.

  Hello

  Please watch the following video:

  http://www.YouTube.com/watch?v=giATn-Uu6Nk

  It will be useful.

• OfficeJet Pro 8600 Plus fried by storm - how can I removed the ink cartridges

  A storm on the last week my OfficeJet Pro 8600 Plus feeding dish. The printer is irretrievably economic so I ordered a new printer.

  Without power, the transport of ink cartridge is stuck in extreme right position where it is impossible to remove the four ink cartridges relatively new. Ink is not cheap... would like to be able to recover the disabled printer ink cartridges but cannot understand how the cart release.

  Any sugguestions would be appreciated.

  In the end from the deceased by removving Assembly ADF/scanner printer ink cartridges. This provided access from the top to the distribution of ink stuck.  T10 Torx driver required to remove all.

  The new printer will not accept the cartridges retrieved when installing printer... had to use the "setup" cartridges in the box with the new printer.

  After you configure the new printer, however, I've been able to 'Set up' cartridges for almost new XL cartridges that I had recovered from my old printer.

• HI, how can I scan a picture and only the witout the rest. On a HP Officejet Pro 8600 Plus?

  HI, how can I scan a picture and only the witout the rest. On a HP Officejet Pro 8600 Plus?

  When I scan I got my photo and all white for the rest of the screen

  It has no function of machine harvest in the 8600 software. To get the exact size, you will need to manually set the size for the scans that you do. You can find the setting by clicking on the blue link to advanced settings in the first scan window. Will take you to a place that will allow you to change the size of the scanning area. Hope that helps.

• How to use legal paper in OfficeJet Pro 8600 Plus

  How can I get my printer Officejet Pro 8600 all-in-0ne take legal paper?  The printer's specifications say it prints legal size, but the tray is letter size.

  The tray can be extended to legal size paper.  Remove the tray and note the blue lever on the left side.  This lever will extend the tray to the legal size.  After having developed the status bar, move the slider to Center to provide the appropriate alignment of the loaded paper.

• 8600 pro more: Officejet Pro 8600 Plus no Magenta

  Shows estimated ink levels screen I have a magenta full certridge which is correct, but the printer will not print any color. I cleaned the print head and the sheet that comes out shows no magenta. I changed the cartridge for a new, everything was good for several days, and the same thing happened. Do I need a new print head?

  Hi mjdiebel,

  I'm sorry that your printer is not turning off any magenta ink.  You have already replaced the cartridge and clean the print head.  You may be able to recover the ink by making another cleaning; but at this point the print head may need to be replaced.

  Here is a document that describes the steps that you have already taken and how to order a printhead if you decide to go this route:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8600-plus-e-all-in-one-printer-series-N911/4322915/document/c04113542/

  The price of a printing head can be high, depending on the age of your printer, you can decide to buy a new printer instead.

  I hope this information helps.

  Jean

• HP Officejet Pro 8600 Plus: HP Officejet 8600 does not scan to computer more - after having moved from the House

  Equipment:

  HP Officejet Pro 8600 more

  MacBook Air mid 2011

  Mac OS X Lion 10.7.5

  ASUS router DSL - N16 (new)

  I moved home and brought my computer and printer with me. I chose a new access provider and sent the new router.

  My old House my computer and the printer/scanner worked fine. Now set up at the new House and I can print but it won't scan. The computer and peripheral HP are connected to the router. I uninstalled all the HP software and reinstalled. On the front of the printer if I select Scan of the computer he says not 'found computer.... ' Make sure that the feature is enabled"using the HP utility. But in the HP utility there is not the option "Scan to Computer" more. I used to be able to scan to the computer to the printer, and I used to have a scanning tab in system preferences / print and scan - but not more!

  Details of what I tried:

  1. Uninstalled HP software.
  2. System preferences / Print & Scan - removed all printers.
  3. On the front of the printer: you click Network and disconnected.
  4. Off, computer, printer and router.
  5. Tour of router on. The printer is turned on.
  6. Used the wireless configuration wizard.
  7. Chose my router - "Found WPS router".
  8. The router WPS button is pressed. 'Network connection' 'successful connection' (n.b. left wireless live 'Off').
  9. Turned computer on - check the connection to the router OK.
  10. System preferences / print and scan - Add printer. He sees my printer - I select this one.
  11. Option to download and install the software of Apple-selected.
  12. Printer appears in Print & Scan-Idle / green spot. There is a print tab and a scanning tab.
  13. Click on the power levels: "Information not available". Click the HP utility: "unable to communicate with the device selected. Try to print: "the printer is not connected.
  1. Go to support.hp.com/gb-en/drivers - type in the printer model.
  2. Download the installation software "HP Officejet Pro driver software and full functionality" version 12.23.0. Save the dmg file.
  3. HP download and install the wizard downloads files on computer. Click on dmg download, double click on HP Installer.app.
  4. Click the HP Installer dialog box. Ignored HP ePrint offer.
  5. "Select the device you want to install" - no device is listed. Click on «my device is not listed...» "and"continue ".
  6. Select model device drivers - 8600 network / wireless Officejet Pro. Installation options: checked HP recommended software and additional software.
  7. Software installed with success, but still need to configure the device. Press to continue.
  8. Device not shown yet. Add device manually, using the IP address of the printer. Printer is displayed.
  9. 'Add the Print Queue' box - must add the printer to the system by using the "add a printer".
  10. Click IP in the toolbar. Protocol: HP Jetdirect - outlet. Enter the IP address of the printer. "Print using" field shows my device. 'Add '.
  11. Back to the installer - congratulations! Successfully installed.
  12. Utility HP ok - prints ok.
  13. On the front of the printer: select Scan / scan to computer: «no Found computer...» Make sure that the feature is enabled. Mac OS X: open utility HP. Under scan settings, click Scan of the computer, and then make sure Enable Scan to computer is selected. »
  14. In the HP utility, there is no "Analysis settings" or "Scan to Computer". There is "scan to E-mail and"Scan to Network".
  15. In the system preferences / print and scan - it doesn't have the printing tab and the tab analysis (see 12 above)
  16. Check the built-in Web server. Wireless status is connected. On the scanning tab I can Webscan to computer (but only 1 page at a time - not good for multi-page documents!)
  17. Try Apple Image capture - no devices specified in the list of devices.

  Hello

  First, make sure you have the latest firmware installed as follows:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8600-plus-e-all-in-one-printer-series---N911/4322915/model/4323647/document/c02919168/

  Then, try the following:

  1. Of the printer, click on the right arrow / left and press the ion of the configuration of the printer.
  2. Select Network Configuration.
  3. Select direct Wireless Configuration.
  4. Ensure the Direct wireless is enabled and take one step of his password if such a value.
  5. Click on the WiFi icon from your Mac and connect to the SSID 8600 spirit "live / Print" in its name.
  6. Go to System Preferences > print and scan and click on the plus sign to add the printer - you see it listed as Hello via the direct wireless connection?

  Please let me know the results, if it not listed as Hello with Direct wireless, which clearly show that the new router interrupts the multicast connection, this is the same as the connection through a different router.

  On your screenshot, it seems that your router do not transfer packets to multicast to the need...

• OfficeJet Pro 8600 Plus exemplary prints with black streaks

  I just bought a HP Officejet Pro 8600 Plus and it seems to work perfectly when printing; However, when I tried to copy something, the copy came out with black streaks that close to unreadable printing and are more dark/concentrate toward the left side of the page.

  How can I solve this problem?

  @Imagehappy, you have the more than 8600 or a different version of the 8600?

  The reason for the question is because I want to give you a link to update the firmware.

  Also, do not forget if you can find one of my post useful or want to say thanks don't forget to click the White Star under my name to give me congratulations.

  I really appreciate it!

  Thank you!

• OfficeJet Pro 8600 Plus: network capability are not available

  Dear Sirs,

  The Officejet Pro 8600 Plus has already been set for a wireless connection. It was primarily used with the USB port.

  We've tried lately set up the wireless connection, and we couldn't.

  We received the message: network capabilities are not available.

  We could not move forward.

  We tried the factory reset, buit didn't work.

  I appreciate your help to resolve this isse.

  Concerning

  Ibrahim

  Please come back to me @Shahin_ij. I think the printer reset will solve the problem. I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Reset the printer: what you need to know

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.