HP Officejet Pro 8600 Plus: network capabilities have been disabled

Similar Questions

• HP Officejet Pro 6830: Integrated network capabilities have been disabled.

  Trying to connect to my HP Officejet Pro 6830 printer wireless network, but it says 'integrated network capacities have been disabled. Contact your administrator or the person who set up the printer.

  I put the printer myself, and there is no administrator. It didn't work because I had to change the router.

  I understand that I must just reset the printer to the factory settings.  I also have to reconfigure the wireless to my router again.

  Can you help me, please?

  Hello, @Ash2 - greetings!

  Thank you for joining the HP Forums! I'm happy to be of your assistance.

  I understand that you need to reset your printer. I send you a private message with the steps to reset the printer. Please check the icon of the mailbox at the top right of this screen.

  Let me know how it goes. Good luck!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• HP Pro X476dw: HP X 746 Pro "integrated network capabilities have been disabled. Contact your network administrator. »

  Hello

  I have a HP X476dw Pro Printer.On the configuration of the network under network printer menu, watch 'integrated network capabilities have been disabled. Contact your network administrator or the person who set up the printer'.

  I can't print or reset the printer to factory settings. Any idea?

  Thank you very much

  I found a solution by myself:

  On the ready screen:

  1. Tap the Back four times consecutively to open the Help Menu.
  2. Scroll down and find "toggle the Menu.
  3. Click on "activate/disable Menu."
  4. Click on 'network '.

  Make sure that all the network is turned on, otherwise click Ok to activate all the network.

• OfficeJet Pro 8600 Plus: network capability are not available

  Dear Sirs,

  The Officejet Pro 8600 Plus has already been set for a wireless connection. It was primarily used with the USB port.

  We've tried lately set up the wireless connection, and we couldn't.

  We received the message: network capabilities are not available.

  We could not move forward.

  We tried the factory reset, buit didn't work.

  I appreciate your help to resolve this isse.

  Concerning

  Ibrahim

  Please come back to me @Shahin_ij. I think the printer reset will solve the problem. I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Reset the printer: what you need to know

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

• OfficeJet 7610: network capabilities have been disabled.

  Hello

  I have a similar problem with my Officejet 7610.

  The message it gives is "network features have been disabled, contact your netwrok administrator or the person who set up the printer. I'm unable to print via usb or wireless.

  Can you help me to get it working properly again.

  Thank you

  Hey @lkoblavie,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that you see a message on your Officejet 7610 Wide Format e-all-in-one printer who cares for you advise to contact your administrator because communication networks has been disabled. I can help you with that.

  I included some guidance on how to perform a factory reset on your printer in a private message. If after resetting you are unable to print, please let me know if you try to print through mainly a cable network through a wireless network, or via USB cable as well as what happens when you try to print and I will be able to help you further.

  Please let me know if this resolves your problems or if you have any other questions. If not, have a great week!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• Printer HP Officejet Pro 8600 Plus: notice I have paper

  The paper is in their but he does not notice.

  Hi @Printer666,

  Welcome to the Forums of HP Support! I see your HP Officejet 8600 more does not recognize the paper in the tray. Do you get any error messages? I see you are using Windows 10, did this happen after having upgraded to Win 10, or was it a problem before?

  "I would like to you to start troubleshooting here: a ' paper ' or 'Stalled engine Pick' displays

  What are the results?

  I'll watch for your reply.

  Thank you

• Photo printing is blurred: HP Officejet Pro 8600 Plus

  Hello

  Recently I bought printer HP Officejet Pro 8600 Plus and I have no complaint about normal printing.

  Yesterday I bought HP Everyday Photo paper glossy and took some Photo impressions. to my surprise, I see that there are a lot of blur and a large part of the ink is taken on the photo.

  This printer really print photo printing? or I'm doing something wrong

  Output picture is very blurry, a large part of the cartridge from the printer and the ic a sensation by using ink on my fingers

  can someone help me here

  Thank you

  Load the print paper down in the input tray side.

  Many papers have print sides and not printable as paper photo and other special media.

• HP Officejet Pro 8600 Plus: HP Officejet 8600 does not scan to computer more - after having moved from the House

  Equipment:

  HP Officejet Pro 8600 more

  MacBook Air mid 2011

  Mac OS X Lion 10.7.5

  ASUS router DSL - N16 (new)

  I moved home and brought my computer and printer with me. I chose a new access provider and sent the new router.

  My old House my computer and the printer/scanner worked fine. Now set up at the new House and I can print but it won't scan. The computer and peripheral HP are connected to the router. I uninstalled all the HP software and reinstalled. On the front of the printer if I select Scan of the computer he says not 'found computer.... ' Make sure that the feature is enabled"using the HP utility. But in the HP utility there is not the option "Scan to Computer" more. I used to be able to scan to the computer to the printer, and I used to have a scanning tab in system preferences / print and scan - but not more!

  Details of what I tried:

  1. Uninstalled HP software.
  2. System preferences / Print & Scan - removed all printers.
  3. On the front of the printer: you click Network and disconnected.
  4. Off, computer, printer and router.
  5. Tour of router on. The printer is turned on.
  6. Used the wireless configuration wizard.
  7. Chose my router - "Found WPS router".
  8. The router WPS button is pressed. 'Network connection' 'successful connection' (n.b. left wireless live 'Off').
  9. Turned computer on - check the connection to the router OK.
  10. System preferences / print and scan - Add printer. He sees my printer - I select this one.
  11. Option to download and install the software of Apple-selected.
  12. Printer appears in Print & Scan-Idle / green spot. There is a print tab and a scanning tab.
  13. Click on the power levels: "Information not available". Click the HP utility: "unable to communicate with the device selected. Try to print: "the printer is not connected.
  1. Go to support.hp.com/gb-en/drivers - type in the printer model.
  2. Download the installation software "HP Officejet Pro driver software and full functionality" version 12.23.0. Save the dmg file.
  3. HP download and install the wizard downloads files on computer. Click on dmg download, double click on HP Installer.app.
  4. Click the HP Installer dialog box. Ignored HP ePrint offer.
  5. "Select the device you want to install" - no device is listed. Click on «my device is not listed...» "and"continue ".
  6. Select model device drivers - 8600 network / wireless Officejet Pro. Installation options: checked HP recommended software and additional software.
  7. Software installed with success, but still need to configure the device. Press to continue.
  8. Device not shown yet. Add device manually, using the IP address of the printer. Printer is displayed.
  9. 'Add the Print Queue' box - must add the printer to the system by using the "add a printer".
  10. Click IP in the toolbar. Protocol: HP Jetdirect - outlet. Enter the IP address of the printer. "Print using" field shows my device. 'Add '.
  11. Back to the installer - congratulations! Successfully installed.
  12. Utility HP ok - prints ok.
  13. On the front of the printer: select Scan / scan to computer: «no Found computer...» Make sure that the feature is enabled. Mac OS X: open utility HP. Under scan settings, click Scan of the computer, and then make sure Enable Scan to computer is selected. »
  14. In the HP utility, there is no "Analysis settings" or "Scan to Computer". There is "scan to E-mail and"Scan to Network".
  15. In the system preferences / print and scan - it doesn't have the printing tab and the tab analysis (see 12 above)
  16. Check the built-in Web server. Wireless status is connected. On the scanning tab I can Webscan to computer (but only 1 page at a time - not good for multi-page documents!)
  17. Try Apple Image capture - no devices specified in the list of devices.

  Hello

  First, make sure you have the latest firmware installed as follows:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8600-plus-e-all-in-one-printer-series---N911/4322915/model/4323647/document/c02919168/

  Then, try the following:

  1. Of the printer, click on the right arrow / left and press the ion of the configuration of the printer.
  2. Select Network Configuration.
  3. Select direct Wireless Configuration.
  4. Ensure the Direct wireless is enabled and take one step of his password if such a value.
  5. Click on the WiFi icon from your Mac and connect to the SSID 8600 spirit "live / Print" in its name.
  6. Go to System Preferences > print and scan and click on the plus sign to add the printer - you see it listed as Hello via the direct wireless connection?

  Please let me know the results, if it not listed as Hello with Direct wireless, which clearly show that the new router interrupts the multicast connection, this is the same as the connection through a different router.

  On your screenshot, it seems that your router do not transfer packets to multicast to the need...

• Connected HP OfficeJet Pro 8600 Plus status reads "problem with printer."

  I could just ePrint on an OfficeJet Pro 8600 Plus replacement and them have not used for printing yet. I was in the devices page to manage the settings and change an address for one of my devices. The newly added column 8600 State reads 'Online', but also 'problem with printer '. Instructions I was referring to the display panel of the unit for Outlook2003 on the given problem. A check of the display surface showed no information, just a typical home screen. I checked through the display print and found no problems-all functionality is enabled and fully functioning. I checked then the functions of printer in the window 'Printers and devices' of all computers (all running Windows 7 Professional) on the office network. The 8600 are active and full functionality works correctly between the printer and all the computers.

  I then close the printer 8600, left for several minutes, and then lit it back and reconnected. The State says 'Problem with printer' remains in the device window HP.

  I am at a loss as to what this supposed problem can be and don't know what should be a next step. Does anyone have any advice or information that could help in this situation? It would be appreciated. Thanks in advance to those who could help

  HP support responded to my question by e-mail. I was told that the message 'Problem with the printer' is due to a bug in their system. Also said that as long as the status column indicates the printer is "Online" and everything else is fnctioning correctly, don't worry about this.

  I consider that a resolution of the post!

• HP Officejet Pro 8600 Plus does not connect through the Device Manager but will connect bij Win7.

  I have a HP Officejet Pro 8600 Plus that works very well with some computers connected via ethernet.

  On a new computer with Windows 7 Ultimate edition, HP Device Manager can't find the printer, even when I give IP address.

  When I try to add a new printer network in Windows (add printer) windows detects the printer less than a second.

  I need the hp Device Manager configuration so I can use all the options off the officejet.

  Problem solved.

  The printer has a fixed IP address and the customer got his IP by DHCP. By dhcp, dns suffix has been changed so the printer dns suffix and the client does not mach.

  Now the printer receives its IP address by the dhcp server. The dhcp server always gives the same address to the printer.

• OfficeJet Pro 8600 Plus: HP Officejet Pro 8600 Plus - Can no longer print with my Mac

  I have been using a printer HP Officejet Pro 8600 Plus via my MacBook Pro (OS X Yosemite version 10.10.4) for about two years with no problems until recently.  Since a few days ago, I'm more able to print wireless, despite the fact that the printer is connected to the network.  Interestingly, the print queue reflects the print job completed, but pages do not print.  In my attempts to solve the problem, I have (i) restore factory settings and re-written information of network required on the printer; (ii) disconnected the printer and waited five minutes;  (iii) unplugged and reset the router. (iv) deleted and reinstalled the software and drivers printer on my laptop.  My laptop is in communication with the printer as evidenced by my ability to scan using HP Scan wireless, but I'm unable to print the document once it is scanned.  Finally, I am able to print the network settings Page in the menu of the printer, but not the printer web page... I get an error message saying 'the printer is busy. Try again later.  Any ideas to fix this frustrating problem would be greatly appreciated.  I apologize if my descriptions are not technically accurate because I am a novice when it comes to computers and networks.  Thanks a lot for your help.

  Thank you for your response and suggestions. I really appreciate it.  You beat me to the punch... only a few hours ago, I was able to get the printer working again... but I forgot to update my post.  As you recommended, I have reset the printing system, downloaded a new driver... hpprinterdriver3.1.dmg... added a new printer... restart the printer, my router and my laptop... and the printer from work once again from my Mac.  Yet once again, I appreciate your efforts... Bravo.

• How to set the Date and time on my HP Officejet Pro 8600 Plus?

  I have a HP OfficeJet Pro 8600 Plus, and I would like to know, how can I implement the time stamp that is under my printer display screen continually Jan 00 00 00:00 a.

  Thank you

  @misslady,

  HP has gone green, here's the guide you're looking for.

• OfficeJet Pro 8600 Plus exemplary prints with black streaks

  I just bought a HP Officejet Pro 8600 Plus and it seems to work perfectly when printing; However, when I tried to copy something, the copy came out with black streaks that close to unreadable printing and are more dark/concentrate toward the left side of the page.

  How can I solve this problem?

  @Imagehappy, you have the more than 8600 or a different version of the 8600?

  The reason for the question is because I want to give you a link to update the firmware.

  Also, do not forget if you can find one of my post useful or want to say thanks don't forget to click the White Star under my name to give me congratulations.

  I really appreciate it!

  Thank you!

• 8600 pro more: Officejet Pro 8600 Plus no Magenta

  Shows estimated ink levels screen I have a magenta full certridge which is correct, but the printer will not print any color. I cleaned the print head and the sheet that comes out shows no magenta. I changed the cartridge for a new, everything was good for several days, and the same thing happened. Do I need a new print head?

  Hi mjdiebel,

  I'm sorry that your printer is not turning off any magenta ink.  You have already replaced the cartridge and clean the print head.  You may be able to recover the ink by making another cleaning; but at this point the print head may need to be replaced.

  Here is a document that describes the steps that you have already taken and how to order a printhead if you decide to go this route:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8600-plus-e-all-in-one-printer-series-N911/4322915/document/c04113542/

  The price of a printing head can be high, depending on the age of your printer, you can decide to buy a new printer instead.

  I hope this information helps.

  Jean

• Maverick incompatible with Officejet Pro 8600 Plus

  Maverick update os x 10.9 is incompatible with Officejet Pro 8600 Plus.

  1 PDF files from the Web pages are black and show no information when I try to print from any browser.  Must take snapshots of Web page and print from that

  2 info printer shows that it is still printing when it is finished and will not move forward to the next task

  Help, please!  I see that there is no HP software update to resolve this issue and am confused why you didn't do your printing software compatible with a huge update of Mac.

  

  Hi podisc,

  Thanks for the quick response.  It is good to hear that you can print, it's at least a start.

  I know that you have not received the error messages in the document, but the behavior you describe leads me to believe that the software did not completely uninstall or install completely with the driver for the Mavericks.

  Please follow the steps listed in the document below and let me know how it goes.

  An "unsupported Operating System" or "Software is not compatible" message on a Mac running OS X v10.9 Mavericks "

  http://support.HP.com/us-en/document/c03976994