Printer HP Officejet Pro 8600 Plus: notice I have paper

Similar Questions

• printing messages iPhone5 for printer HP Officejet Pro 8600 Plus

  How to print on my printer HP Officejet Pro 8600 Plus my messages from my iPhone5

  Hello

  Printer HP Officejet Pro 8600 Plus supports AirPrint. Please see the following article:

  http://www.Apple.com/support/iPhone/Assistant/AirPrint/

  Kind regards.

• Printer HP Officejet Pro 8600 Plus works but the Scanner does not

  I recently bought a Toshiba laptop with Windows 7 Home Premium operating system.  My previous laptop is a Toshiba also upgraded to Windows 7 Home Premium operating system.  I have a printer HP Officejet Pro 8600 more all-in-one printer.  The printer/scanner works fine with my laptop more older but with the new laptop that I can't get to the printer.  I am not able to get the scanner to work.  I reloaded the software several times but the scanner still does not work.  The scanner works fine with laptop more old, even if it has the same operating system.  I get an error message that says "Scan of the computer is turned on.  You can start a scan from the printer.  Your computer is not listed as an available computer control panel of the printer.  If please restart your printer and try again. "Can anyone help with this?

  Hi ranjisamaraweera,

  Even though I'm MVP I represent Microsoft or speak. If I can and will speak
  as I think.

  The proper functioning of the printer and Scanner is the direct responsibility of the producer of material
  and no windows. There are hundreds of these devices that work correctly on Windows 7 if
  those who don't have no drivers and other interfaces which are not compatible to Windows 7 should be
  written correctly. Of course many older devices are not supported by their creators for later
  Versions of Windows. Microsoft passes but does not write drivers and interfaces
  Printers and Scanners need to function properly. So, the manufacturer and no one else, is totally
  Manager to see if there are interfaces and appropriate drivers.

  Many device makers do not write new drivers and interfaces for older hardware because either
  they cannot support the new methods or because they want to sell new hardware.

  Personally, I don't think that Microsoft is lying because they also say that device manufacturers have the
  Omos unique to provide the necessary compatible drivers and interfaces.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Change the default print for all printing on OfficeJet Pro 8600 Plus

  OfficeJet Pro 8600 more

  10.8.3 OS iMac

  I want to change the value print factory set in the default print setting. I want the documents I send to the printer via AirPrint to print in black and white, not color. But the 8600 by default is always color. Sometimes, I am able to change this setting for individual tasks, but sometimes I can't. I wish that the default to be always in black and white. Is this possible?

  The steps above refer only to the Mac, indeed.

  AirPrint provides all color configurations, but only allow printing in color... all available Airprint parameters are listed in the What are the printing options are available? section below:

  http://support.HP.com/us-en/document/c02623193

  You can install the HP ePrint app and print through it, like black and white, know that color options are available for the types of documents only (PDF, TXT, MS Office files, Web sites or email), but not for the types of photo files:

  http://support.HP.com/us-en/document/c01923321

  Shlomi

• OfficeJet Pro 8600 Plus: now really can not print from Officejet Pro 8600 Plus

  It is my second attempt to get help.  First aid made it worse.  I had been unable to print from my printer wireless to my MacBook Pro, iPad, or iPhone.  After 20 hours I managed to do print from a cable (it sees my network but none of my devices can see).  So I posted here asking for help and was told to uninstall the software, repair disk permissions, and then reinstall the software.  But when I downloaded the new software that my computer would not install it because it says it's for Mac system 10.7 or less and I 10.10.  So now I can't print anything at all.  I need this job.  Please help me to fix it for real.  I can't take this more.

  In fact, HP support did not help at all. I finally fixed it myself after a lot of trial and error. The answer was that the printer software was incompatible with the software on my Mac. I removed Rowmote and it started working again. Weird, Rowmote had not been a problem before, but it can be updated. I was told there was new software of the printer of February, but when I went to the driver page with the link that the person a condition he had as the old one. So if he is really a software it should be provided to users. Thank you, they were attentive, though, and I received several phone calls.

• All-in-one printer, HP Officejet Pro 8600 Plus will not print the image in the logo of the company

  I have a Mac the OSX Lion version 10.7.3 (11 d 50) I recently installed this printer. I printed the other documents in color without problem.

  Now, I'm trying to print an invoice with my company logo. The X in the logo is an image that has different shades of blue, but it prints other items on the invoice that are blue. It also correctly print the watermark in blue.

  Any suggestions?

  Thank you for responding!

  It turns out that I had to change my color matching print settings to make it work. I went under correspondence of colors and changed the option provider corresponding to ColorSync.

  This automatically replaced by the profile glossy color Brochure instead of paper simply. It's a shame as this used toner and does not allow you to print a copy of the project.

  I tried a couple of the other profiles, but so far they use as much toner, or does not print the logo. I was subjected to time constraints, so I had to stop experimentation, but once this project is completed, I will try the other profiles to see if they work.

• OfficeJet Pro 8600 Plus N911g: Folds of paper for applications, but not for diagnosis

  My printer worked flawlessly for a little more than 2 years, and without visible reason to do it, now folds of paper for almost every print job.

  When I print from an application (Word, WordPerfect, Excel, MS Paint, etc.), it is a page scale crinkle approximately 2.5 "high.  This is not the case when I have a diagnosis or a test page. It also doesn't happen when I print from an Apple device.

  I tried to use different types of paper.  No difference.  I tried using different paper settings (thick paper, photo paper, etc.).  No difference.

  Any advice on how I can solve the problems?

  I forgot to mention that I tried a generic driver and that failed, too.   After my announcement, I've uninstalled and reinstalled the printer, which (at least so far) has fixed the problem.   Thanks for the tips.

• HP Officejet Pro 8600 Plus: network capabilities have been disabled

  Hello

  The printer is no longer connected to the wireless network.

  Any attempt to connect shows a message box that says "network features have been disabled, contact your netwrok administrator or the oerson who set up the printer" (that would be me).

  I've read up on the case and could not find any clear solution that works.

  In addition, I can't access the network through settings menu because it displays the same message.

  I tried to connect the printer via USB and update settings wirelesss but received and error message that says "on your HP printer wireless radio does not work.

  I also made a 'hard reset' by removing power, while the printer is on, and reconnect the cable after a period of time. It goes the same for the router.

  None of these methods has changed anything.

  Help, please

  Hi @ezvdo,

  Thanks for getting back to me and hold me responsible, I need that time to time! In fact, I thought I had sent you a private message, I have started to and got distracted {squirrel}

  I will send you a private message to now, please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

• Photo printing is blurred: HP Officejet Pro 8600 Plus

  Hello

  Recently I bought printer HP Officejet Pro 8600 Plus and I have no complaint about normal printing.

  Yesterday I bought HP Everyday Photo paper glossy and took some Photo impressions. to my surprise, I see that there are a lot of blur and a large part of the ink is taken on the photo.

  This printer really print photo printing? or I'm doing something wrong

  Output picture is very blurry, a large part of the cartridge from the printer and the ic a sensation by using ink on my fingers

  can someone help me here

  Thank you

  Load the print paper down in the input tray side.

  Many papers have print sides and not printable as paper photo and other special media.

• OfficeJet Pro 8600 Plus: HP Officejet Pro 8600 Plus - Can no longer print with my Mac

  I have been using a printer HP Officejet Pro 8600 Plus via my MacBook Pro (OS X Yosemite version 10.10.4) for about two years with no problems until recently.  Since a few days ago, I'm more able to print wireless, despite the fact that the printer is connected to the network.  Interestingly, the print queue reflects the print job completed, but pages do not print.  In my attempts to solve the problem, I have (i) restore factory settings and re-written information of network required on the printer; (ii) disconnected the printer and waited five minutes;  (iii) unplugged and reset the router. (iv) deleted and reinstalled the software and drivers printer on my laptop.  My laptop is in communication with the printer as evidenced by my ability to scan using HP Scan wireless, but I'm unable to print the document once it is scanned.  Finally, I am able to print the network settings Page in the menu of the printer, but not the printer web page... I get an error message saying 'the printer is busy. Try again later.  Any ideas to fix this frustrating problem would be greatly appreciated.  I apologize if my descriptions are not technically accurate because I am a novice when it comes to computers and networks.  Thanks a lot for your help.

  Thank you for your response and suggestions. I really appreciate it.  You beat me to the punch... only a few hours ago, I was able to get the printer working again... but I forgot to update my post.  As you recommended, I have reset the printing system, downloaded a new driver... hpprinterdriver3.1.dmg... added a new printer... restart the printer, my router and my laptop... and the printer from work once again from my Mac.  Yet once again, I appreciate your efforts... Bravo.

• OfficeJet Pro 8600 Plus will not be printed

  I just bought a HP Officejet Pro 8600 Plus, and I've connected two PC and two iPads to it.  I also plugged on my Macbook Pro (iOS 10.6.8), but unlike four other devices, the Macbook will not print.

  The Macbook watch the installed printer, sends the print job, but nothing prints.  I reinstalled the printer, the driver updated and reset the system print, all nothing will do.   I know that the Macbook and printer can communicate because I can print a test page for the HP utility in the browser.

  You do not know this information helps, but I have observed in anticipation of eventually being removed from their own print jobs.  I also noticed that, strangely enough, a print job will appear in the queue, I try to print the levels of power, but I was not initialized it.

  What Miss me?

  (Btw, it's a wireless installation.  I read that others troubleshoot using a static address, but this isn't an option for me. My ISP router will not work with a static address.)

  After much research, I found someone else on this forum who has had the same problem and found a solution.  I post the link below in case someone comes on this post.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/OfficeJet-Pro-8600-will-not-print-on-Mac-OSX-10-7-5/m-p/2307027/highlight/true#M80392

• OfficeJet Pro 8600 Plus exemplary prints with black streaks

  I just bought a HP Officejet Pro 8600 Plus and it seems to work perfectly when printing; However, when I tried to copy something, the copy came out with black streaks that close to unreadable printing and are more dark/concentrate toward the left side of the page.

  How can I solve this problem?

  @Imagehappy, you have the more than 8600 or a different version of the 8600?

  The reason for the question is because I want to give you a link to update the firmware.

  Also, do not forget if you can find one of my post useful or want to say thanks don't forget to click the White Star under my name to give me congratulations.

  I really appreciate it!

  Thank you!

• E-mail print Officejet Pro 8600 Plus

  I can't print from email, I can print PDFS and all documents in word or excel, but not email.  I reinstall the software and the same thing happens.  All of the suggestions. Officejet Pro 8600 Plus with Windows 7 using.

  How to access your e-mail?

  * Do you connect to a service of e-mail via a web browser?

  * Or you are using a client such as MS Outlook e-mail software?

  If you log on to an e-mail via a web browser client, then you do in Internet Explorer?  Have you tried multiple browsers to ensure that the problem does not follow?

  I would also try another driver, such as the driver of c 990, to see if it is a driver compatibility problem.  For more information about how to use another driver, see thread of Shane_R found here.  I hope this helps.

• HP Officejet Pro 8600 Plus - Duplex printing problem

  I use a printer Officejet Pro 8600 Plus (what is the best printer I've ever had, apart from this problem!).  I use it with Windows 8.1.

  He struggles for more than a few pages print using duplex.  The problem seems to get worse when I print a pdf file.  It starts to print very well and made a few pages, but then I get this message "error on HP Officejet Pro 8600.  "Could not print * name * folder.  It appears on the computer not the printer.

  Any suggestions?

  Thank you

  Hey there @operationorphan

  I just wanted to add my own suggestions here for the issue of two-sided printing that you had with your Officejet 8600.

  You can try to update the firmware: get the latest Firmware and updates

  If this does not help, try to uninstall the printer software , reboot the PC and reinstall the printer. This should dissipate all software problems.

  I hope that helps!

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  See you soon

• Connected HP OfficeJet Pro 8600 Plus status reads "problem with printer."

  I could just ePrint on an OfficeJet Pro 8600 Plus replacement and them have not used for printing yet. I was in the devices page to manage the settings and change an address for one of my devices. The newly added column 8600 State reads 'Online', but also 'problem with printer '. Instructions I was referring to the display panel of the unit for Outlook2003 on the given problem. A check of the display surface showed no information, just a typical home screen. I checked through the display print and found no problems-all functionality is enabled and fully functioning. I checked then the functions of printer in the window 'Printers and devices' of all computers (all running Windows 7 Professional) on the office network. The 8600 are active and full functionality works correctly between the printer and all the computers.

  I then close the printer 8600, left for several minutes, and then lit it back and reconnected. The State says 'Problem with printer' remains in the device window HP.

  I am at a loss as to what this supposed problem can be and don't know what should be a next step. Does anyone have any advice or information that could help in this situation? It would be appreciated. Thanks in advance to those who could help

  HP support responded to my question by e-mail. I was told that the message 'Problem with the printer' is due to a bug in their system. Also said that as long as the status column indicates the printer is "Online" and everything else is fnctioning correctly, don't worry about this.

  I consider that a resolution of the post!