HP p1102: can not install software on windows 10

Hello guys!

I used to connect my printer (hp p1102) to windows7, now I bought the new laptop and I can not install its software on windows 10. It gives me error is 0 x 80131500 and it cannot recognize my printer during installation, but it is in the list of connected devices. Please help me!

Well, this should solve your problem.

  1. Remove the USB cable to the back of the PC.
  2. In your type of search bar in cmd and open Command Prompt.
  3. Type "msiexec /Unregister" (without the quotes) and press ENTER.
  4. Type "msiexec/regserver" (without the quotes) and press ENTER.
  5. In your search bar in msconfig and open type MSConfig.
  6. Click the Services tab.
  7. Click Hide all by Microsoft.
  8. Click Disable all.
  9. Click the Startup tab.
  10. Click Disable all.
  11. Click OK and reboot your PC.
  12. Download and install the latest drivers by clicking on this link.

Please let me know the results after following the above. If you are able to install the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

Tags: HP Printers

Similar Questions

  • The pc seems to have gone to a previous set point during the boot, but now she can not install software and doesn't seem to have Norton AV more

    My daughter's office got fried during the last storm, even though she had a surge protector.  Obviously the power company line was bad.  The pc seems to have gone to a previous set point during the boot, but now she can not install software and doesn't seem to have Norton AV more.  When she tries to run a system restore it gets "extended attributes are incompatible."..: thank you for your help.  Debbie


    I would suggest trying the following methods and check if it helps.

    Method 1:

    Run the scan tool (SFC) System File Checker and check if it helps.

    This problem may occur if a system file is missing or damaged.

    You can refer to the method-the System File Checker tool in the following article:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.Microsoft.com/kb/929833

    Method 2:

    Try to clean boot, and then check to see if this helps you.

    How to solve the problem by running the clean boot in Windows 7:

    Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

    Method 3:

    Try the steps in the following Microsoft article and check if it helps.

    Problems installing and uninstalling programs on Windows computers:


    Hope the helps of information. Please post back and we do know.

  • I can not install any application Windows store. incorrect time showing a time 0 * 80080008 another time 0 * 80072efe all time showing like this different type of error.

    I can not install any application Windows store. incorrect time showing a time 0 * 80080008 another time 0 * 80072efe all time showing like this different type of error. first time using windows 8.1 but restore for windows 8. but problem still. How do reslove this problem.

    Hi Anish,

    If you receive the error 80072efe or 80080008 when you use Windows Store, the cause may be an interruption of the connection between your computer and the Windows Update service.

    Here are a few methods you can try to solve this problem.

    Method 1: Run the Windows Update Troubleshooter.

    Open and run the Windows Update Troubleshooter to fix the problem automatically.

    Method 2: Run the troubleshooter for Internet connections.

    Open the network troubleshooter utility by hitting at full speed in the straight edge screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), inbound to identify and repairin the search box, and then tapping or identify and repair network problems.

    Method 3: Restart the Windows update service and check.

    a. press or press the Windows key + R, type services.msc and press ENTER.

    b. If you are prompted for an administrator password or a confirmation, type the password or click continue.

    c. find the Background Intelligent Transfer Service and check the status.

    d. If the status is stopped, click Background Intelligent Transfer Servicesand then click Start menu.

    e. search Windows Update and check the status.

    f. If the status is stopped, click Windows Update, and then click Start menu.

    g. close Services.

    Method 4: T emporarily disable the security software and verify.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    You can also check out the link and check if it makes a difference.

    Solve problems with a soft

    Please an update of the results to help you further.

  • I can not install software that uses Windows Installer

    Basically, if I want to install c ++ or silverlight or Nero I just can't install it I always get an error message saying 'there is another product installation already' so I think it means the current installation but the thing is that I do not want to install anything!

    I also use a moral of windows vista

    I tried to restart the pc

    and the restoration of the system used

    but there is no hope


    1. go on a computer Windows Vista(any version) that has the Windows Installer service running correctly and run regedit(start-run-regedit).
    2. go to the location
    3. right click on this key and select "Export" and save the key to a flash drive or other device.
    4. double-click on a file .reg registered machine work and import the corrupted registry settings Vista computer.
    6. you will need to go back after importation in services and start the Windows Installer service and set it to automatic.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Why I can not install SP1 in Windows XP version 5.1?

    My Dell C840 Hardrive Laptop just died including the battery. I replaced them both. I put a larger HD-130 GB. I reinstalled the original version of Windows XP 5.1

    After installation I downloaded Service Pack 2 and Service Pack 3. None of them move. Microsoft Helps - gave me a link to download the Service Pack 1a. I downloaded it, but in the midst of unpacking and installation, it stops and says the communication server with unresponsive. I still click on re - try and nothing happens. After several re - try with the same result, I get a dialog box with this message: ' the following error is produced so that the service pack 1 Setup attempted to download files of Service Pack 1 of the internet. " The server did not respond. If the error persists after that you clicked several times, go to the Windows XP Service Pack site and select "problems downloading the Service Pack" that will give you instructions on how to download a version of the Service Pack does not require an Internet connection during installation. " Found no solution on"download service pack issues. "

    Because this Windows XP 5.1 worm has Internet Explorer 6 - Microsoft sites have errors on the page and IE always crashes. I tried to switch to IE 8, but it will not install and still the "Entry Point not found" error

    When I click on "windows update". It brings me to this link: support.microsoft.com/kb/2497281/en-us. But none of the solutions on the page works. I tried all.

    Believe it or not, I have 3 desktops (2 windows based and an Apple MacPro) and this laptop Dell Latitude C840 with windows XP version 5.1 (which module HD and the battery died and I replaced and am trying to load the windows original XP disc supplied with the notebook). I've done with computers for over 20 years. The only ones I had problems were windows-based computers. Never had any problems with Mac. I was hoping that modern Microsoft has improved. If this problem is solved so maybe they have. Does anyone have a solution?

    OK, it's first of all, 'Mac', not 'MAC '. It is an abbreviation of "Macintosh", not an acronym. MAC stands for Media Access Control. And you're crazy if you think that the updates of the system for Macs don't cause problems. Just visit the Apple Support communities.

    There clearly something put on listening to the top with this machine more than just the hard drive and the battery. Works very well if you can, download SP2 and SP3 (you can ignore the SP1) machine, you know, then use an external hard drive or USB key to pass them to the affected machine and see if you can install.

    Use these links to download:

    Service Pack 2: http://www.microsoft.com/en-au/download/details.aspx?id=28

    Service Pack 3: http://www.microsoft.com/en-au/download/details.aspx?id=24

    Internet Explorer 8: http://www.microsoft.com/en-au/download/internet-explorer-8-details.aspx

  • I can't install software to windows 7 using the windows vista product key

    In our firm, we use windows vista OS of PC licensed. can I install windows 7 OS with licensed windows vista product key?


    No, you cannot use the PK of Vista to install Windows 7.


    Windows 7 is not free; you have to buy.

    Microsoft sells more Windows 7; Try Amazon.com.


    This offer is free years; long expired.

    How does the Windows 7 upgrade Option?

    The Windows 7 upgrade Option is available through participating PC manufacturers on some PC and Microsoft on any purchase of packaged product Windows Vista. The Windows 7 upgrade Option applies to Windows Vista Home Premium, Business and Ultimate editions. Your upgrade to Windows 7 will be the comparable version: so you will get either Windows 7 Home Premium, Windows 7 Professional (upgrade to Windows Vista Business) or Windows 7 Ultimate, respectively. The Windows 7 upgrade Option program works on June 26, 2009 through January 31, 2010. Some manufacturers may choose to shorten the time of upgrade Option.


    Before purchasing Windows 7, follow these steps:

    Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

    If this is not available, Windows 7 will not properly work for you.

    Run the "Windows 7 Upgrade Advisor.


    Check if your specifications are compatible for Windows 7:

    "Windows 7 system requirements"


    Windows 7 upgrade paths:

    http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

    See you soon.

  • Can not install updates in windows vista

    Windows vista tries to download updates, but fails to do so. The following message if poster - updates are not configured properly restoring changes. Updates that all start with Ko. The computer had tried to download the same updates many times. My computer has sp1, windows vista premium 32 bit.


    You can hide unwanted updates in windows update.

    Check out the link: http://www.petri.co.il/hide_updates_windows_vista.htm

  • Can not install software Bluetooth Dell Windows 7 64 bit in the Dell Studio 1555

    Hi you

    When I want to install the bluetooth driver laptop Dell Studio 1555 with windows 7 64 bit partly Active switch Bluetooth wireless to help I click F2 to activate bluetooth & wireless, but it does not work.

    mobility of Windows, I'm running Center wireless on & off but still poblem will solve

    I downloaded driver from the site Web of dell and match with my laptop

    Please help me.



    1. what happens when you try to connect to the Bluetooth?

    2. What is the exact error code / message?

    3. were you able to connect via Bluetooth before the show?

    4. What were the recent changes of hardware or software that are performed on the computer before the question?

    Please follow the links below to solve the problem.

    You may need to make your computer discoverable to Bluetooth devices, or configure Windows to notify you when a new device is trying to connect to your computer. To do this, you need to control how your computer pairs with (connects to) Bluetooth devices.

    Method 1

    To control how your computer pairs with Bluetooth devices

    (a) open the control panel by clicking the Start button, then Control Panel.

    (b) in the control panel search box, type Bluetooth, and then click Change Bluetooth settings.

    (c) in the Bluetooth settings dialog box, click the Options tab and do one of the following:

    To make your computer discoverable to Bluetooth devices, select the check box for allow Bluetooth devices to find this computer.

    When a computer active Bluetooth device is in discoverable mode, it broadcasts a wireless signal that allows it to be detected by other Bluetooth compatible computers or devices. This is sometimes called pairing mode.

    Add a Bluetooth device or other wireless or network device: frequently asked questions


    Method 2

    If the previous step fails then check and make sure that the Bluetooth function is running on the computer

    (a) click Start reducing this image enlarge this image, type services.msc in the search box and press enter

    (b) right click on the Bluetooth support service, and then click Properties.

    Make sure that the service status is set to start and service type is set to automatic.

    For more information,.

    Latest version of the driver for Studio 15 (1555( )

    Expand all and search under network Wireless 370 Bluetooth minicards (, A01)


    The problems with Bluetooth devices


    (Applies to Windows 7)

    I hope this helps.

  • can not install software disk for my HP officejet J5750 on my new computer

    I am trying to install my HP Officejet J5700 drive software, but my new computer, which has windows 8, will not recognize me as an administrator. The printer works, but I would like to install the features of ink level, etc. that can be found on the disc

    Hi atrjr1,

    I understand that you are looking for software for your Officejet J5750 to install on your PC in Windows 8. The disc is not compatible Windows 8. I suggest to download the software and install it. I'll paste the link of suitable driver below for you.

    Driver and HP Officejet Full Feature software

    I hope this helps you!

    Kind regards

  • Why I can not install IIS on Windows XP SP3?

    I need to install IIS on my machine with Windows XP Professional SP3.

    I go to start > Control Panel > Add Remove Programs > Add Remove Windows components.

    I select Internet Information Services and click Next.

    Apparently Components Wizard installs IIS and a message of successful execution.  I cliquerai finish.

    However, IIS icon is not included in administrative tools and the localhost URL results in a page not found error.

    Am I missing something?

    See if you can get help in the IIS forums:

  • Help me: can not install IIS on Windows XP Service Pack 3

    I have install window xp service Pack 3, after I installed IIS by go to control panel, add or remove program and it shows the other components such as indexing services and a lot more, but it doesn't show in Internet Information Services (IIS). Please help me, thank you very much!

    XP forums:


    Link above is for XP Forums.

    There is a list of the different Forums XP to the link above to help you.

    You get the help you need there.

    Here is the Vista Forums.

    See you soon

    Mick Murphy - Microsoft partner

  • can not install updates of windows 8, have 13, the error code is 800F0922 HELP


    CF. http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_update/windows-8-updates/74ab4e49-9524-4e91-a258-bfd717a4429c


    Current weather conditions in PA

    Clear 40 ° F / 4 ° C

    ESE 10 mph winds; gusts to 25 mph

  • any installation of windows 3.1 program and can not install that is getting the error message send

    I have no windowsinstaller 3.1 and when I try to download that I can not install either get error messages

    and to send to microsoft / close window

    Impossible to download whatever it is and the other software does not not need help as soon as possible...


    I suggest you to download the package from this link and check if it helps: seehttp://support.Microsoft.com/kb/893803 try also perform the clean boot and check if it helps:


    NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in the article above.

    For more information, see this link:

    Check if that helps.

  • Cannot install LifeCam Cinema "Setup can not continue" error on Windows Vista

    Original title: I can not install Lifecam cinema on Vista Business.  Installation dies and points to kb/935961.  I followed all the recommendations in there and still no luck. Help!

    LifeCam Cinema just bought.  I have tried to install from DVD (version 3.5 installation) as well as downloaded 3.6 install from the Microsoft Web site.  Installation starts, but then fails with an error indicating that the installer cannot continue, look at support.microsoft.com/kb/935961.   I went through all the methods in this kb, nothing helps.   I'm on vista Business, SP2 and have kept with Windows updates.   I tried the end of update/install .net framework 4.0 and that did not help either.   I have NOT yet attempted to plug the camera into the USB slot at this point.



    1. What is the brand and model of the computer?

    2. What is the security software installed on the computer?

    3. have you made changes on the computer recently?

    4. are you able to install other programs and applications?

    5. What are the steps you tried?

    6. What is the exact error message when installation fails?

    Method 1.

    I also suggest you run the fix it tool for the link.

    Tips for solving problems of USB devices


    Method 2.

    Resolve the error "Setup cannot continue" when you install the LifeCam software




    Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you need to disable temporarily to install other software, you must activate it as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Let me know if it worked.

  • Can not install MSXML on a Windows 7 64 bit. Help, please!

    • On a Windows 7 64 bit (new installation), I can not install MXSML. I get an error HKEY_LOCAL_MACHINE32\Software\Mxsml2.DOMDocument.4.0\CLSID
    • I am the only user on this computer and I have rights to admin (checked and double-checked). I can not install some software because it bogged down at this stage. Currently, no version of MSXML is installed on my system. Help, please! It is a self-built system using ASUS P6T Deluxe v2 motherboard. Everything else seems to work very well.

    For any question on Windows 7:


    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for

  • How does the "Trusted Devices"?

    Paired, juice added as trusted device, but it shows not connected. How to connect? P.S. the virus detected is the name

  • recovery of iPhone music library

    Recently, 1 broken laptop. I backed up iphone 1 on a laptop computer 2 before restore and update, but there was a problem with the restoration so it is corrected I use another iphone 2. The backup has been said to include music, but songs have not be

  • HP LaserJet Pro M426fdw: HP LaserJet Pro M426fdw fax from desktop

    Bought this all-in-one printer and I was told I could connect to the network and be able to send a fax from my desktop itself.  The installation creates the printer but not the fax printer.  Can you actually fax with this all-in-one of your workstati

  • Need help with 6 33 sidebyside event log error questions

    I did a complete reinstall of Windows Vista.  The event log showed mistakes aside nearby.   This is one of the six - sxstrace.exe used for the information: Launch the activation context generation.Input parameter:Flags = 0ProcessorArchitecture = AMD6

  • Upgrade Vista to HP7 on laptop at the Qatar. __

    Shop does not allow me to download upgrade Vista to HP7 because there is no site of Middle East and I have no American or British billing with zip codes or mail address.  Where can I download using recognised international credit cards, Amex, Diners,