Internet connection is lost in computer laptop and Xbox when I fill the network.
Original title: the network bridge is being gay
well IM one of the problems with my network bridge that I connected to my card built into my laptop and im for my throu xbox wireless bridge the LAN, and unless he is satisfied, I have internet but when I fill my connections he said: no internet access and I can not access the internet on my laptop and now my habit of Wi - Fi allow me to connect to what anyone I don't have the shared option on check and my connection is really horribly slow and its never been this slow before
2. you remember of any changes to your machine before the question?
b. go to your network and sharing Center.
c. on the left side, click on manage network connections.
d. right click on your wireless network adapter, click Properties, click the sharing tab, mark the tab to share this connection
e. click on apply, then try to connect to xbox with your ethernet cable, either incidentally, it must be a crossover cable in order to function.
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
Tags: Windows
Similar Questions
-
Computer laptop XP does not appear in the network of Vista laptop
My cell phone based on Windows-XP does not appear in my laptop Windows Vista-base and is not accessible from this Vista computer, but it appears in the network adapter connected to the network wireless by a double dashed line. At the same time, the laptop Vista appears in computers on the XP network and is accessible from there. I have already applied Windows XP - SP3 hotfix KB 922120 to XP laptop and checked the firewall on both machines (Exceptions) settings, and they seemed OK. Also, I checked the HKML restrictanonymous DWORD value data value data (0) of the XP machine.
Can someone help me with this? Thank you so much in advance.
HelloMaybe this can help.To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its ownunique name.
http://www.ezlan.NET/Win7/net_name.jpg
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq.html#trusted
Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .
Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx
Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.
http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx
Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
-------------
If you have permission and security issues with Vista/Win7, check the following settings.
Point to a folder that wants to share do right click and choose Properties.
In the properties
Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.
This screen shot is to Win 7, Vista menus are similar.
http://www.ezlan.NET/Win7/permission-security.jpg
The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.
When everything is OK, restart the network (router and computer).
* Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.
* Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.
Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.
-----------
If more control is needed to take a look at this page http://windows.microsoft.com/en-US/windows-vista/Share-files-and-folders-over-the-network-from-Windows-Vista-Inside-Out
Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET
-
Original title: Internet connectivity
my computer toshiba laptop windows 7 just started to fall sharply internet all in a show that is to connect to the internet all my other devices all always online - internet comes back randomly and goes off randomly - tried all settings to make sure that everything looks good.
Hello
Welcome to the Microsoft community.
I understand that you have a problem with internet connectivity. We apologize for the inconvenience caused to you. We also indicate the steps you did.
I would like to know the details below to help you better.
- What is the model number of the laptop you are using?
- Do you have a code error message when connecting to internet?
- You did changes to the computer before the show?
- You are connected to an internet connection wired or wireless?
I ask you to run the Network Troubleshooter utility first to see if it can help diagnose and solve your problem. Open the utility of network troubleshooter by right-clicking the network icon in the notification area, and then click troubleshoot.
You can also run the troubleshooter of Internet connections by:
- By clicking on the Start button, and then clicking Control Panel.
- In the search box, type Troubleshooting, and then click Troubleshooting.
- Under network and Internet, click connect to the Internet.
If the problem persists, try to perform the steps of troubleshooting mentioned below in Microsoft Help article and check if that helps.
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7
Keep us updated on the issue to help you better.
-
I lose the internet connection
Window vista Home premium intel core 2 quad CPU q6600 @ 2.40 ghz, 3.00 GB ram the System 32-bit
The internet connection is lost when the computer puts itself to sleep after that idlen too long time needs to restart to re-establish the connection
Hello
Control Panel - device - network - manager double-click the used network - power management device
Tab - uncheck the computer to allow him to turn off the device.Control Panel - Power Options - check at each change of diet Plan - change Plan settings - advanced
Power settings - check the settings there.You may reset the default power Plans and and then change them as needed.
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Relatively new MacBook OSX El Cap 11.4
My internet connection is lost at home after a few minutes. I stop the wifi, then turn it back on and it works again for a few minutes and then repeats. It works fine everywhere else?
Please see recommended settings of WiFi routers and access Apple points.
Despite these recommendations, some routers will work better with the latest Mac models if you turn the radio 2.4 GHz mode in settings and only use the 5 GHz. Note, however, that very old devices Apple and some third-party devices can then not connect at all.
Some third party routers have advanced that you may need to change the settings:
The encryption algorithm must be AES.
The group key interval must be 3200.
I can't give you specific instructions on how to change these settings, because all routers are different. Refer to the documentation for the provider.
-
my internet connection is lost during the use of the internet
often, I find that my internet connection is lost while using the internet.how can solve the problem.
Hello
1. for how long are you facing this problem?
2. don't you make changes before this problem?
3. what operating system do you use?
I suggest you to try with the mode safe mode with network and check.
Start your computer in safe mode with networking
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
-
Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?
Hi Jer9009,
Welcome to the Microsoft answers site.
· Could you give the exact error code or error number you get?
To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.
A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.
For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge
Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge
Swathi B - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
I would like to connect my HP Pav 23-1010t All in One Desktop on my computer laptop HP Pav dm4. For the purpose of switching between the two, using the HP Pav 23 video/monitor, keyboard and mouse to control what's on the laptop.
A KVM will pass work? Some swtich or other cables?
Hello
No, this won't work KVM or other cables.
Kind regards.
-
I downloaded IE 9, my daughter being connected as a guest's laptop, and all records
I downloaded IE 9, my daughter being connected as a guest's laptop and all of its files (music, photos, docs) have been erased. How to recover and restore (the Documents folder was inside school assignments!)?
Hello
You can follow below link that can help you to solve your problem:
Recover lost or deleted files -
Original title: how do peripheral DVD player on my laptop
Im trying to read a DVD Blue-ray in my new computer laptop and a message saying "Windows Media Player cannot play the DVD. The disk has been created in a way that the player does not support. and also tried to solve the problems and see them all, then clicked on reading and burning CD and blu - ray discs and message saying could not identify the problem. then I went to windows media dvd player and the message saying that "Windows has no dectet a dvd playback device, if you do not have a dvd playback device, you will need to purchase and install a.. "If do not have a DVD player installed, contact your OEM or device for the latest driver for your particular device" Please can someone help me as its driving me crazy. Thank you
You must have a third-party program to run Blu - ray discs.
http://www.arcsoft.com/TotalMedia-Theatre/
http://www.CyberLink.com/products/PowerDVD/overview_en_US.html?&r=1
Your new PC must have provided with software to play. Otherwise, I'd contact the manufacturer and see if she did or why it didn't.
-
I lose the internet connection on my HP Pavilion laptop of series g on all three days. I have to use the connectivity of the system restore restore (lan & wireless). This is the third episode of this problem. Troubleshooting services cannot identify/fix the problem.
What are the events the choice of system restore show as having passed in the meantime? Are you aware of all the events as the Windows updates?
-
Hello, just set up a new computer laptop and wanted to reinstall CS5 on it. The system is El capitan. When I finished the download and try to install I got a message saying the installation file is damage and saying it s better power eject it. I tried to download several times and in different places. That is wrong. Does´NT CS5 run on El Capitan? Or what else? Thank you.
CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan
-which means you are trying to use CS6 and earlier at YOUR risk of having problems
-You can get CS6 and previous programs to install and run, or you can not (some do, some don't)
-Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help
Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)
-also a TEMPORARY security change https://forums.adobe.com/thread/2039319
-the guardian https://support.apple.com/en-au/HT202491
-
I have Adobe cc on my computer, I bought a laptop and you want to install the Adobe software. But I installed the software and I would like to use the trial version. How do I fix
Hello
Please follow the steps under https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Let us know if this was helpful.
Thank you
-
How can I turn off the error 'no internet connection '? I am on wireless and my internet connection is often intermittent. This popup is really boring.
Thank you
you have to start the application of office cc, at most, once every 30 days. and if you have an annual subscription, simply start it once all the 91 days.
so, in your cc preferences, uncheck "Start on login" and close it.
-
Frequently, my computer stops and restarts all am surfing the net. What can I do?
Hello
1. what type of internet connection do you use? What is a wired or wireless?
2. you receive messages or error codes?
2. did you of recent changes on the system?
Step 1:
You can check the following items and check if the problem occurs in safe mode with network.
Start your computer in safe mode
Startup options (including safe mode)
Step 2:
If you do not experience the problem in safe mode with networking, you can perform a clean boot and check.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.
Maybe you are looking for
-
Hello, I just bought iPhone7, 128g and I realize that when the screen is off and I shake the camera, the screen lights up. Is this normal? If so, how can I stop it? If not, what can I do to fix this?
-
I have download a fake version of firefox?
Accidentally, I downloaded firefox on this site: http://www.freegogo-Download.com/?ADNM= {creative} & kw = firefox & mt = e & mn = {investment} & ct = {target} & nt = T & expr {aceid} = & ap = {adposition} & dv = c & & dr = cHaWck1mIXvlDmW4vExthXN3DK
-
Siri anniversary incorrect reports
Hey guys,. I encounter this problem with Siri on my birthday. I do not want to see my real birthday in this topic of discussion, so I'll just give a date for example. When I ask her "what is my birthday," she said "August 20". However, my actual b
-
Hello I'm trying to put spaces in the string after each 4 characters (2 bytes). Any help will be greatly appreciated. Thank you hiNi.
-
I continue to receive notification of update of Windows that new updates are available for the 2478663 KB / 2518870 / 2468871 / 2533523. I have now installed them 3 times. What I am doing wrong?