Need help with Windows XP to Windows 7 upgrade. Says I need more free space on my hard drive.
I've used Windows advisor, and he says: I need 20 GB of free space to install Win 7 and I have 6 free on a 40 GB drive, when I remove the XP will this free up enough space?
I've used Windows advisor, and he says: I need 20 GB of free space to install Win 7 and I have 6 free on a 40 GB drive, when I remove the XP will this free up enough space?
Probably not.
See: http://windows.microsoft.com/en-au/windows7/help/upgrading-from-windows-xp-to-windows-7
Tags: Windows
Similar Questions
-
I NEED FREE SPACE ON MY HARD DRIVE?
If I save my photos, the videos, the exet files. on my local drive (c :)) and the Save to hard drive (d) then I delete the files, photos, videos, exet.) (c) hard drive to free up more space?
First of all you need to know if your D: drive is a recovery disk. If this is the case, you are NOT, don't tell ANYONE, supposed to touch.
Recovery disk stores the image of your system. It is used to restore your computer when it crashes.As to need more spcae of disk in drive c:, you already have " Disk Cleanup "?
You should do cleaning disc on a regular basis in order to recover disk space.
Here's the tutorial for disk cleanup. (Assuming you are using Vista)
http://www.Vistax64.com/tutorials/76073-disk-cleanup.htmlThe tutorial consists of 2 parts.
The first part, from #1 to #11 is temp to delete files, cookies etc etc. It will give you in disk space.
The second part of #12 at the end is to remove all except the most recent restore points. This will give bring you a ton of disk space.
Regularly cleaning disc and you will not question due to lack of disk space. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem. -
Please help with Windows 7 upgrade
Hi, I recently bought a desktop computer (compaq presario cq5110y) and he qualified for the upgrade to Windows 7 when it comes out in October. I followed the direcions on the sheet accompanying the tower and then asked me to fax on my receipt on a proof of purchase. I got a cover letter that I printed and has attempted to send the info to them several times without a bit of luck. So I'm on the phone with hp customer service for other ways, I can send a copy of this information. After hold for 15 min, the guy was told to go online and try to find for me because he could not get what. At the beginning of the call I already said that I looked everywhere online. In any case, I just tried hp online support, and whenever I click on my product model it fails and he sends me to an error page. All I want to do is send a copy of my receipt and proof of purchase. I'm stuck and starts to get pretty frustrated. Does anyone know the address for the upgrade team I can just send it to? Or their email? Phone number? No matter what?
Please visit: https://www.hpwindows7upgrade.arvato.com/north_america/Endcustomer/ContactUs.aspx
-
Is 55 GB of free space on the HARD drive enough for Window XP?
Does anyone have any suggestions?
Thanks in advance for your suggestions
Yes, windows xp takes about 4 to 6 GB and requires at least 15% to work properly.
-
Okay so if please bear with me and be patient. I'm not tech savvy. I know enough to be able to remove an old hard drive and put another one, but when there are errors, I don't know what to do.
Here's the situation.
I have a Dell Studio XPS with Windows 7 installed. I started having these notifications that my hard drive could be a failure. I tried everything that I could find to fix it without having to buy a new HARD drive without success. The current system has a 1 TB Seagate hard drive. I installed a memory additional bar thingie right after that I got the computer about 4 years ago. (If someone tells me how to find the properties of real system, I post them if necessary). Anyway, I bought a new WD 1 TB black disk hard to install before my old dies and loses all my photos and documents, etc...
I took the old drive yesterday and installed the new hard drive. I put back the case and turned on the machine. I put in my Windows 7 installation disc. He began installing Windows 7... It's completely past the initial screen where it says it to load it and the other... I had accepted the license agreement, but did not have to make a profile and do the work and the reader. I hope all this makes sense. Then it pops up this message "installing Windows could not set up Windows on hardware on this computer." I couldn't figure out what to do from there. I got the new drive and put the old one back to and here I am. I tried to find solutions to this problem, but I either don't can't make heads or tails out of the responses on the internet or the solution is not exactly my problem.
Please help if you can! And if you have any suggestions, please dumb them down so I can understand what to do. I CAN do if loaded, you just have to not talk too irritable. Laughing out loud
Thank you in advance!
Maybe not...
The Windows installation is not happy about something, and since it gets at least started which is a good thing, but your installation problem can not really be with Windows - perhaps something about Dell hardware or your 1 TB HARD drive.
I looked at your system and found this article that you can read to see if it sounds like your original question:
Windows Setup could not configure Windows on hardware on this computer.
http://www.Dell.com/support/article/us/en/19/SLN293812/en
Since Dell has written an article for help on this subject, it means they've met enough times to take the time to compose the article and put it on their WWW site (but, they say, it is a possible resolution).
Could you take the issue in the Dell online community where experts hang out (especially your amber light).
Another good place for support is www.bleepingcomputer.com where there is a similar topic as your question (except Vista) on a Dell and a new disk of 1 TB (also a Seagate) and Dell ideas did not work, but someone else has found a way to fix it:
http://www.bleepingcomputer.com/forums/t/453378/installation-fails-to-complete-on-new-HDD/
The bleepingcomputer for your error message search reveals other areas and people who have got things to work in different ways, then it is perhaps another place to look for ideas.
If the installation still fails it would not hurt to do the BIOS setting and see if things are getting longer, and since you are going to write the current settings before proceeding with the adjustment you can always cancel the adjustment if things get worse.
-
Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)
I don't know why vista windows no longer charge, or when the files and folders disappeared
How Windows Defender is on this problem?
Follow these steps to try to solve your problems of boot.
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner:http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Data recovery:
1. slave of your hard drive in another computer and read/save your data out there.
2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.
3 Alternatively, use Knoppix Live CD to recover data:
http://www.Knopper.NET/Knoppix/index-en.html
Download/save the file Knoppix Live CD ISO above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://isorecorder.alexfeinman.com/isorecorder.htm
Download the Vista software from the link above.
After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.
Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.
Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.
Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.
When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.
Click on the icons of hard drive to open and to understand which drive is which.
Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).
Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.
See you soon.
Mick Murphy - Microsoft partner
-
I have a laptop that I had to change the HARD drive due to a complete failure. I had a Windows 7 key I know has been good and have never used, purchased as part of a package of pc 3. Now the installation tells me that this is not a valid key. I paid almost $150.00 for this set of 3 installs for Windows 7, about 5 years ago.
The old HDD is dead, I tried to connect with a USB key and nothing. The laptop was working fine with WIndows 10, then the portable HARD drive is simply dead. I need help with a new key, or at least the one I have to work. The new drive HARD won't have not all partitions or any attached former windows key. I can't get past the check of Windows screen.
Need help please.
You must use the product key located on the COA sticker (at the bottom of the laptop, sometimes inside the battery cover or access. Once you have located the product key, and then follow the instructions below to change the key of the key from the factory to the key on the sticker.
How to change Windows 7 product key
http://www.windowsvalley.com/how-to-change-product-key-in-Windows-7-and-Windows-Vista/
-
Original title: help with Windows XP.
I have a laptop with Windows XP. When I try to go on homepage e-mail he says I have no internet connection, even if I do. Also, I can't run windows update. A pop up as my security settings will not allow active x but don't give me any option to change as I've seen it before. I tried everything I can think of.
Hi SteveKey,
· You use Internet Explorer to access these sites?
· If so, which version?
Method 1: Run automated troubleshooting and check if it helps.
Improve performance and security in Internet Explorer
Method 2: Check to see if the following is useful.
a. open Internet Explorer.
b. Select tools, then Internet Options in the menu at the top of the Internet Explorer window. The Internet Options window opens.
c. Select security from the list of tabs at the top of the Internet Options window. The Security tab appears.
d. click on the custom level button. The security settings window opens.
e. scroll down to download signed ActiveX controls entry and select the quick option.
f. scroll down to Run ActiveX controls and plugins entry and select the active radio button.
g. Select the OK button to accept the changes. You may have to restart Internet Explorer for the settings to take effect.
Method 3: You can try to optimize Internet Explorer and see if it makes a difference. Follow steps 2, 3 and 4 of this article.
-
Adobe Acrobat 9 Pro is compatible with Windows 10? Adobe recognizes no longer scanning for my printer/scanner driver? Almost impossible to find answers and help!
Hi leighh50950915,
DC XI & Acrobat Acrobat has been tested successfully on Windows 10.
Other versions may or may not work, difficult to predict behavior.
However, try to uninstall & reinstall the printer drivers.
Also make sure that Acrobat 9 is updated.
Kind regards
Nicos
-
What will be needed to CCS, lr, ps (uninstall/reinstall) with Windows 7 upgrade to 10? What preparedness is recommended?, what will be needed to CCS, lr, ps (uninstall/reinstall) with Windows 7 upgrade to 10? What preparedness is recommended?
Disconnect from the cloud on the machine that is being upgraded before you start the upgrade process.
When the system is upgraded you can install the Cloud service in the same way that you did initially.
-
Original title: Windows Photo Gallery problems
I have a problem trying to open Windows Photo Gallery, when I click on the program tab I get an error message saying: Photo Gallery cannot start. You can have enough space on your hard drive or critical files may be lack of Windows.
- NO Mahesh B G , is not windows live photo gallery, windows photo gallery & is the message I get "could not open the Windows Gallery with error message: 'You may not have enough space on your hard drive or critical files may be lack of Windows'." Thank you Dave 07/11/2012
Hi David,
1. have you made changes on the computer before this problem?
2. are you referring to the Windows Live Photo Gallery?Please follow the methods and mark the question below:
Method 1:
Fixed problems with Windows Live Photo Gallery that does not:
http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/Method 2:
You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.
To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.
I hope this helps.
-
Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"
The PC is running Windows 7 Starter. I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.
When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"
Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgradeAdditional resources:
-
Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »
Which edition of Windows 7 is installed on the machine?
Which edition of Windows 7 you are trying to do an Express upgrade to?
Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.
---------------------
Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade -
Get the error message, this button cannot be used with Windows Anytime Upgrade
I just perchased a Windows Anytime Upgrade - Windows 7 Home Premium to Ultimate but when I enter the key I was send it tell me that this key can not be used with Windows Anytime Upgrade
Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade -
I have Windows 7 Home Premium and bought a Windows Anytime Upgrade to Windows 7 Ultimate. After extraction in the online store, I got a download link and product key.
However, when I try to run the Express upgrade and enter the key that I got from the online store, the operation fails and the window says:
"The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »What should I do?Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade
Maybe you are looking for
-
Is this how you re - index places.sqlite, to speed up performance?
Get SQLite Manager... https://addons.Mozilla.org/en-us/Firefox/addon/SQLite-Manager/ SQLite Manager / tables / moz_places Right-click on moz_places / reindex Table / Yes * * * * * * * * * * * * * * * * * * * * * * * * Per this page... https://support
-
Hello guys I have just updated my iphone son´s 9.3.1 to 9.3.2 4S but the iphone is brick saying 'connect to itunes '. But nothing is work downgrade, restore, update all fails with the error 29. Any help? It seems that my iphone 4S has the same diseas
-
Problem starting with ' erreur...system32/cmd.exe: access denied. "
After this "DOS black screen" error is present for a relatively short period of time, the system proceeds to load and it seems that the system works very well. It seems to me it should be to correct this error, but I don't know what is the cause. I h
-
Support for Office 2013 Archive Manager
Hello What Archive Manager will support Exchange2013, Shrepoint 2013 and Lync 2013?
-
HP officejet 4620: error on the printer
I have error on printer and my printer will not copy I try to print, most of the things