HP Pavilion 17-e020us: updates from HP Pavilion 17-e020us (processor / SSD)

Similar Questions

• Pavilion g6-1d21dx: no luck update Pavilion g6-1d21dx to SSD

  I tried to replace the hard drive in my g6-1d21dx with a SSD Pavilion before enjoying the free update of Windows 10. I installed the drive (a unit of SanDisk Extreme 480 GB that I had sat unopened for a while) and then used my recovery discs for Windows 7 on SSD. The process seemed to go very well - he went through all the discs five recovery, restarted from the SSD and began the installation process. Soon, I got an error message "restoration incomplete" well. So much for that. (The HP Recovery Manager also gave me this incredibly helpful explanation: "there could be unexpected reboot phase Specialize in BBV1.) ("The process will cause panic CTO because the image might not be normal") on the reset, I also had an error message about ntoskrnl.exe is damaged or missing.

  I put the original back drive computer to and updated from Windows 7 to Windows 10 on this drive, just to get the license Windows 10 (it was the last day to get the free upgrade). I also used Windows 10 media creation tool to create a Windows 10 installation DVD. Then, I put the SDS back to and I tried to install Windows 10 using the DVD. I tried several times, but the installation has always fails. I got error messages like "Windows could not set the offline locale information. "Error code: 0x80FE0000" and "we could not format the selected partition. [Error: 0 x 8070057]. "I've also had this a few times:"Windows cannot be installed to this disk. Windows cannot read the selected drive. Windows cannot be installed to this disk. Windows has no determine if this disc and his parents have the necessary driver support. »

  This computer isn't all what age - it is possible that the BIOS does not support the SSD? I updated the BIOS of the SSD, but that has not solved the problem. I also made sure the BIOS of the computer is up to date.

  Thanks in advance for any relevant information.

  Here are the conclusions that I have reached after spending a lot of time on this project to upgrade:

  At the beginning of this thread, what you advised me strongly to clone my old hard drive instead of trying a new install of Windows 10 on my SSD. I recommend the contrary unless your system works perfectly with your old hard drive, because this way, you can leave the system, the software and the data files on your old hard drive intact in case you go account you have to go back and check on something or you decide to abandon the upgrade. I found that there is no mystery to a cleaning only install on an SSD, as long your SSD is compatible with your computer. I had updated my old HDD from Windows 7 to Windows 10, and after this upgrade, I was getting other error messages every time, I started the computer (inaccessible_boot_device, unexpected_store_exception and kernel_data_input_error). Since there are so many problems on my old HDD, I have probably restores it to Windows 7 so I can always, in case I ever need to refer to my old configuration. Web sites said that once that Windows 10 has been enabled on your computer, future Windows 10 installs on the computer is automatically turned on, even if you have restored the machine to Windows 7 or Windows 8.

  If you try a new installation, make sure that you do so with an attached network cable. It makes a huge difference for me. A clean install without a connected network cable has led to all sorts of problems, including a lack of access to the Internet and some devices are not installed correctly. When I did a clean install with an attached network cable, all of my devices have been installed automatically. This includes the Synaptics touchpad, the HP wireless button, the AMD Radeon graphics card and the Realtek card reader. I didn't need to install whatever it is myself, and the Device Manager does not display the unknown devices. Wireless network connected during installation, even my Wi - Fi was not usable during or after installation.

  One final note: my g6 Pavilion is 64-bit capable, but I installed 32-bit Windows 10 on it, because I use an old software running under Windows 64-bit 10. So far, 32-bit Windows 10 seems to work very well.

• How can I disable the Agent updates from HP running?

  HP pavilion D4100Y

  Windows XP SP2 or 3 (not sure)

  No error message

  No recent changes

  Problem: The program "HP updates Agent" run frequently and on no particular schedule, certainly not the one I chose.  He takes over my computer for hours and using most of the CPU, fluctuating between 13% and 87% to 1 etc.3% at 6%, etc.. The computer crashes and I can not use it for something else. On the HP updates screen, I put updates on 'NEVER', but that did not work.  The programs always run. In the Windows Task Manager window, the program is called "Agent updates from HP".

  I find nothing on this problem in the base of support.

  How can I disable the Agent updates from HP running?

  Select your Start button, in the search box type 'msconfig' then msconfig.exe under programs.

  Look under the tabs "Services" and "Boot". Uncheck update HP agent, select 'Apply' and close.

• Updates from HP agent... always began in the early and slows down computer

  HP Pavilion a1222n, Win XP Home

  When we move first on the computer, it is slowed down by "updates HP agent running' controlled by the Task Manager.

  I would like to disable the execution the present automatic and run it when I want to run the updates from HP.  I read in another post to go to start > all programs > setting > select never allowing you to a chosen when run the HP update agent.  I can't seem to find it on this machine, the message I read was for another model.

  Thank you

  Ron3033

  Hi Ron,

  Try the following.

  Hold down the Windows key and press R.  In the run box, type msconfig and press to enter.  In the System Configuration window, select the Startup tab and Remove the check mark next to the HP update agent.  Click apply and then click Ok to save the changes and restart the PC for this change to take effect.

  Kind regards

  DP - K

• Updates from HP.exe has encountered a problem and needs to close

  I get this message every time I start the desktop computer, and I'm afraid that I can't receive full updates from HP.   I have a HP Pavilion m7680y desktop computer.   How can I do this prompt go away?

  Hello Siberhusk,

  There is a program that starts when your computer starts. The start-up is managed by MSCONFIG. You will need to isolate the program that generated the message before finding the solution.

  To place your computer in a clean boot state... instructions available here
  http://goo.GL/w3KQH

  Once in a clean boot, see if the problem still occurs.

  If not then start programs turning under a little bit at a time until you isoliez what program to launch at startup generates the error.

• I can't download the updates from hp support assistant

  I have hp pavilion g6 and I can't download updates from hp support assistant, when I press download and install selected updates, then I found above downloads is finished, I clicked next and then when I came back I found that not yet made, help please!

  Hello

  Try the following

  Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  When this has completed, restart the laptop.

  Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  After installation, restart the computer again.

  Kind regards

  DP - K

• UPDATES FROM HP SUPPORT ASSISTANT PROBLEMS

  1 > product name - HP Pavilion DV6 3120 tx

  Product number - XV676PA #ACJ

  2 > OPERTING SYS... - WINDOWS 7 HOME BASIC (64-BIT)

  I GET NEW UPDATES FROM HP SUPPORT ASSISTANT. I WAS FACING THIS PROBLEM FOR A TIME LONG ENOUGH. WHENEVER I RUN HP SUPPORT SSA. IT IS IMPOSSIBLE TO GET UPDATES... SO, KINDLY TELL ME A SOLUTION...

  Hello

  Try the following.

  First, use Microsoft 'Fixit' on the following link to uninstall your current version of HP Support Assistant - this is particularly useful in avoiding the problems of resettlement when running a 64 bit OS.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Once this process is complete, restart the laptop.

  Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  After installation, restart the laptop.

  Kind regards

  DP - K

• museums of 15N: what is the maximum ram I can put in Pavilion 15N with processor AMD RADEON

  What is the maximum ram I can put in Pavilion 15N with processor AMD RADEON?

  Hello.

  The capacity is 16 GB maximum supported RAM in this model, you can go ahead and update if you want to.

  In addition, you can take a look at the technical details of your laptop and follow the steps to change the RAM:

  http://h10032.www1.HP.com/CTG/manual/c04402649.PDF

  I hope this helps.

  See you soon!

• Upgrade HP Pavilion DV6T-6100 processor

  I currently have a HP Pavilion DV6T-6100 with the 2GB Radeon switchable graphics card and an i7-2630QM processor. I watched the maintenance manual and the best processor I can update is the i7-2820QM. When I bought this machine, there was only the 2nd gen available i7s.

  Would it not possible to upgrade for a 3rd gen i7 processor? Specifically, the i7-3820QM? They have the same power of dissipation, and it would be much faster than if I switch to just the i7-2820QM.

  No, I'm not 100% certain, but certain to 99%.

  More 3rd generation processors require Intel 7 as the 3820 series chipset.

  Your a Intel 6 series chipset.

  There is no revision of BIOS listed on the support page and the driver of your laptop that adds support for any Intel 3rd generation of processor.

  You can also read the info on the link below which lists the supported processors with the chipset of your notebook can operate.

  Now, this list seems very important to me, and the BIOS of your laptop would have to have all the firmware for the processors listed, which I doubt, he does.

  In any case, you won't see the i7-3820QM among the long list of processors, they say, are supported in the HM65 chipset.

  HP decides which processors will work in what specifications and built the BIOS accordingly.

  http://www.CPU-upgrade.com/MB-Intel _ (chipsets) HM65_Express.html

  To be sure, I'd install only one of the supported processors listed in the service manual for your model.

  The only time where I go against that advice is if a BIOS update adds support for the latest processors are not not in the service manual, and it lists the new processors that will be supported by the update.

• Podcast app is not updating from iTunes

  Podcast app is not updating from iTunes

  

  Saying "Podcast is available on IOS - only to get Podcasts search app store for your IOS device.

  I use 3 (new ipad, IOS 9.3.2) iPad and iTunes for windows 12.4.1.6

  How to solve it? Thank you

  Ignore the update, Podcasts is built into iOS 9, you can't update built-in apps on your iPad (except through iOS updates). (It's show due to: remove the built-in apps from the home screen on your device iOS with iOS beta 10 - Apple Support)

  If you have not all devices running older versions of iOS (or if you do, if you do not use Podcasts on them), you could remove the application from the My Apps from your iTunes library section so that the "update" to disappear.

• How can I prevent updates from any application?

  How can I prevent updates from any application?

  In OS X goto System Preferences > > App Store and a tick "automatically check for updates.

  < image edited by host to remove personal information >

• Download of updates from Toshiba

  When I try to download an update from Toshiba, such as a driver for my wireless Lan, it ends up in programs and features or disappears. Recently, I tried to download a driver released this year to replace the 2012, went through the procedure as indicated, but when I went to the Device Manager to check the old driver was still there so where I'm going wrong?

  Latest version is available on http://aps2.toshiba-tro.de/wlan/?

• No sound after an update from Toshiba

  I followed the instructions of what looked like the official update from Toshiba to uninstall something I don't remember exactly what, but I was directed to the Panel, sysytems and something to do with video, etc, and now I have no sound. System says no audion output device is installed.

  I must say from my experience, this time with a Toshiba Satellite is less satisfactory, always goes into hibernation and is difficult to restart, even after updating the BIOS suggested!

  Hello Wan

  And what model of laptop you have exactly?

  I'm sorry, but how understanding your problem anyway, he can't remember what you did. Who knows what you do with your laptop. All other problems can be caused by your experiences and to do something to change the configuration of the operating system.

  In this case I recommend a radical, but for you, the best solution: back up all your data and install the OS by using recovery media delivered. I'm sure with the factory settings everything works well again.

• Beta 5 of Firefox does not check the updates from an account without administrator privileges and won't ask administrator privileges apply downloaded update

  I can't get Firefox Beta 5 to check the updates using an account without administrator privileges. Beta version of Firefox 5 downloaded an update (from 2 Beta Beta 3), and now, there's a button apply update in the Firefox window that won't hurt, even though the update is properly applied from another account with administrator privileges.

  I use Windows 7 Professional 64-bit. In general, I use Firefox for an account without administrator privileges and provide the only administrator credentials when you are prompted to install or remove software.

  Delete the files in the folder updates\0 and updates.
  
  You may need to remove active - update.xml and updates.xml so, if it is present.

  C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)
  

  • http://KB.mozillazine.org/Software_Update (Update works not properly)

• Equim L10-300 - I need updates from Toshiba?

  I got my laptop about 6 months, I use Windows update and Norton which I also maintain, do I have to download other updates from toshiba? It is advisable to update my bios? I look on the toshiba "updates" box and there is no link for this laptop.

  Thank you very much.

  Hello

  First of all you must only update the BIOS if you have serious problems, and if you know that the update will solve the problem.
  Second, the wrong BIOS or the procedure may damage the laptop!
  Well, if you use the windows automatically update and if you update applications of Anti virus if you are on the right side.