HP Pavilion 750n just beeps and the LED stays on

Similar Questions

• HP Pavilion HPE H8 1234: HP Pavilion HPE H8 1234 corrupted BIo 8 beeps and the led lights

  I was updating my BIOS and I got an error. Now, the coomputer starts with 8 beeps and 8 power botton blinking LED. IV tried WIndows update Bios USB, key and B. Im running outta ideals. Someone help me please.

  Hello

  Situations of BIOS corrupted can be not recoverable with some versions of the HP BIOS.

  Disconnect the PC and remove CMOS battery and press and hold the power button for 60 seconds. While the battery is removed, test it with a voltmeter-ohm - and if it isn't close to 3.3 volts, then replace it.  It's a $4 item.  If the battery is good before you reinstall it, plug the PC back in and give it a go.

  This procedure of recovery of the HP BIOS claims to work by internal HP.  Read the instructions carefully.

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• When I type on my keyboard my laptop beeps and the keys seem to react quickly to be like.

  When I type on my keyboard my laptop beeps and the keys seem to react more quickly especially when I hit the same key twice.  My cat has been on my keyboard, and when I found it on it there was all kinds of screens that she had accessed... ridiculous!

  Hello

  I suggest you to perform a system restore to restore the computer to an earlier point in time before the problem started.

  Refer to the article help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.

  After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.  Try to understand the problem.  Can I try to reinstall? Problem is on flashing screen cannot do anything.

  Original title: Windows 10

  Hello

  Thanks for posting in the Microsoft Community.

  (1) do the Windows 10 installation process is complete?

  (2) you are able to view the Windows 10 desktop?

  You can check the help below article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-10/troubleshoot-screen-flickering

  If the problem persists, you can reinstall Windows 10 by downloading an ISO image file to create installation media.

  To download an ISO image see the link below:

  https://www.Microsoft.com/en-us/software-download/Windows10

  To create an Installation media check out the link below.

  http://Windows.Microsoft.com/en-us/Windows-10/media-creation-tool-install

  It will be useful. Please get back to us with the State of the question.

  Thank you.

• When I click on a tile (windows8.i) screen just flicks and the program does not open what went wrong and can I fix it?

  * Original title: opening with a tile on the start menu

  When I click on a tile (windows8.i) screen just flicks and the program does not open what went wrong and can I fix it?

  (Moved to customization and ease of access)

  I thought I made the text in a link from my mistake. Here is the page: solve the problems with an app

• Satellite L500-1TC - does not start and the screen stays black

  Hello

  I have a Toshiba Satellite L500-1TC and since yesterday it no longer starts.
  The picture freezes and it restarted. Given that I can push the power button on my laptop and the LED indicates that it is on, but the screen remains black.
  No idea what I can do?
  The warranty is still active, so can I send it to Toshiba?
  Kind regards
  Sven
  (Sorry for my bad English)

  Hey Buddy,

  What you can try before you contact Toshiba official service is the following:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  If it doesn t work it seems to be a hardware problem, then contact an authorized service provider. If your laptop is under warranty, the repair is free :)

• Satellite P10 PSP10E shutdown and the light stays on

  Hello

  I'm having some problems with my old man (2004) Satellite P10 PSP10E-0SCM7-FR

  One day he simply closed (as if power, no BSOD) and the power and the led for WIFI and the CD/DVD button remains lit.

  Most of the time I can't activate it under as the power button is still on. (Power button, WIFI, and CD/DVD are on).

  I tried to remove the battery and unplug the computer for at least 30mm
  I tried to press the Start button for a period of time (one minute) then disconnect everyting (battery and power cord) at least 30 minutes before to turn it back on
  I have reinitialzed the computer using history CD provided with the computer
  I removed the radiator cleaned as well as the fan and then replace a new thermal grease
  I changed the memory

  Yet I still have the same problem, for some reason, the computer simply shutdown and the light stays on. Occasionally, the power light start, and I am able to restart the computer. But I'm unable to understand what makes the computer is shut down, or when that happens, what makes the power light turns off and make it possible to start the computer again.

  No idea what's going on?
  The Start button / stop and led market would be an error message?
  If so, what that means?

  Any help is very appreciated. Thank you!

  Damien

  lighting even when taking the battery and unpliging for a while (30mm in an hour)

  Hello

  Usually, books closed due to the high temperature and in this case, the unit must be disassembled and cleaned professionally, but it seems that you already have what I read in your post above.

  Probably its a motherboard problem.
  The RAM modules appear to be checked and is not RAM issue.
  So problem mobo is possible

• HP Pavilion dv7-1260us what are the LEDs on the front edge of the case?

  A light flashes on my HP Pavilion.

  The symbol of market is first a lightning bolt symbol is planned and the symbol of the hard drive is the last.

  What does the flashing lightning?

  Thank you

  Hello TrainingCounsel, welcome to the Forums of HP.

  It seems that you have some flashing LED on your laptop. I will try to help you with this.

  To answer your question, the Flash is your battery light. It flashes (usually an amber color) indicates that it is low and must be charged.

  As you mention have other flashing LED with it, I'll give you this document just in case it fits you're general question: Blank Screen LED Error Codes.

  I hope that answered your question, if you have other questions or need help please let me know. Thanks for posting on the HP Forums.

• Loud beep and the power on / off power during installation of the operating system 10.11.2

  Someone else did this happen to them? My MacBook Pro (early 2011) making a loud beep sound and the power and turn off several times while he was installing the new os 10.11.2 update this morning? Everything seems to work fine, I've just been caught unawares. I've never had such a thing happened to me in updating my mac. Someone else?

  can happen

  I think the install dialog says that the mac can shut down and put into service once more.

  If its works well it should be good.

• How can I disable standby/hibernation / startup emits a beep and the sounds?

  I have a Lenovo Thinkpad x 200 running vista Ultimate edition. 7454 - cto of type

  How can I disable those annoying beeps that sound whenever my computer goes in and out of standby and Hibernate.

  I tried to transform the model of 'No sound' sounds, but the tone still sounds when the computer enters and wakes from sleep and hibernation.

  If I turn on "mute" is put into standby or Hibernate mode, the beep does not sound (which is what I want). Unfortunately, its impossible to come back on MUTE when im trying to put the computer away from the sleep or Hibernate (which makes it very distracting to turn on the computer during the class).

  Solution:

  Enter the BIOS by pressing F1 during startup

  > Config

  > Beep and alarm

  Tone control power set to [Disabled]

  Your solution is correct, but I think it's also accessible under ThinkPad Power Manager software. Go to the "Global settings" tab and choose "beep when the power state changes.»

• Pavilion dv7-6b32us - max and the type of RAM I can install it?

  Hello

  For the pavilion dv7-6b32us, which is the type and maximum RAM I can install?

  The manual says it can go up to 16 GB, but I don't see that 8 GB (4 x 2) available for sale in the world.  We do not know also what type I need.

  Thank you...

  Hello

  Please check this:

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/Pavilion+dv7+series/Pavilion+dv7-6b32us-upgrades.html

  You can buy from them or use the information to buy elsewhere

  Kind regards.

• Computers button just flashes and the computer will not start

  Computer on button just flashes continually and the computer will not start.  I unplugged everything and put it back together.  Same thing.  Nothing.  Monitor is on, but nothing on the screen, of course, because the computer does not start at the top.

  Computer on button just flashes continually and the computer will not start.  I unplugged everything and put it back together.  Same thing.  Nothing.  Monitor is on, but nothing on the screen, of course, because the computer does not start at the top.

  Hey Bowers

  you get a splash screen on startup with an acer for hp dell etc. or the logo of the motherboard

  otherwise, it would seem that you have a hardware problem

  Contact the manufacturer of the computer or a local reputable computer repair workshop

  Walter, the time zone traveller

• BlackBerry Smartphones BlackBerry keeps beeping all the time - just beeps when the connection with the carrier is active.

  Gentlemen.

  I have a Curve 8900 with the 4.6.1.133 (Platform 4.2.0.85).

  This unit maintains a beep every 10 seconds, I tried to remove the battery when the BB was on, wait a minute, put it again.

  I looked at all the configurations.

  I Don t no the slightest idea and wanted to throw it in the window.

  Any ideas? Advice?

  NEW INFORMATION. The device stores only beep if the wireless connection with the carrier is active. If it s off the beeps stops. I m using Claro to the Brazil.

  Camilo

  I found the solution. This is a bug beetween the network operator's SIM card software and the BlackBerry device. It s already solved. I had to follow certain steps to enable and disable a specific feature of the network operator and wait a dialog box confirm my operation.

  The beeps comes with the dialog box, but the apears only dialog box if you are in a specific screen of the blackberry. If you are in the home screen, it will not appear and you hear the beep.

  Camilo

• Stuttering, beeps and the DVD Player lost on Satellite M40 149

  Hello

  For some time now the laptop will work ok for about 1 to 2 hours, and then all of a sudden the speakers start making random pitch high bleeps distorted very strong. When it starts, the system starts stuttering. Every 2 seconds or so it will freeze for about 1/4 of a second. All treatments freezes - including the sounds and display. It's annoying, but generally a slight Jolt sorts it...

  When this happens occasionally the DVD player will also disappear, and I need to reboot to get it back. Sometimes I need to leave it off for a short time so I think it's perhaps something to do with overheating?

  In any case, my main problem now is that the DVD drive is very rarely now. I used a few tools of analysis of the firmware and the connection to the drive port is present but the laptop cannot connect to it. I thought that maybe s DVD firmware update can fix this, but I couldn't yet.

  I couldn't find all the previous reports of the present. Anyone has any idea what this could be? Or how I can fix this?

  If she came, I'd be happy to buy an external DVD drive, but the presence of the bad connection interferes with some other tasks, I have...

  Thank you
  David.

  LOL :D I read on many Web sites that the iTunes software is in trouble and is not fully compatible with Microsoft.
  Apple and Microsoft together?  :| good idea ;)

  Thanks for the info ;) dude