HP Pavilion A1230n 'on the button '.

The small plastic piece that holds the 'button' in place broke - so now I have to turn on your computer with the end of the eraser of a pencil at an angle down into the hole.   Nobody seems to be able to provide this little piece of plastic, but they tell me that I need to order a new scope (which is the whole front room) for about $75.00 - it's quite expensive just to replace a small plastic part.   The piece that broke broke in three places and is not repairable - someone has any suggestions as to where (other than repair of computer looking for discarded computers) I could find a part to repair this computer.  It is still an excellent machine and works perfectly - it looks like earlier to a piece of junk!

You can get the HP power button and otherwise

Try here: http://cgi.ebay.com/Brand-New-HP-Pavilion-FRONT-PLASTIC-BEZEL-Only_W0QQitemZ250364417717QQihZ015QQcategoryZ51064QQcmdZViewItemQQ_trksidZp1742.m153.l1262

Tags: HP Desktops

Similar Questions

  • Pavilion G6 2338sl: hardware button to turn off the touchpad does not work on Windows 10

    Hello

    I have a Pavilion G6 mobile 2338sl. When I was on Windows 8.1 the touchpad worked a lot, so I've updated for Windows 10. Windows updated my drivrs to last, provided also by Synaptics (19.0.19.1). HP says the moment is upgrade from Windows to provide the driver for this laptop, as you can see on the driver support page. The touchpad works, the parameters can be set (gestures etc.), the touchpad turns off when another mouse is connected (it's ok).

    The problem is that if I use the touchpad and I want to turn off the button, it does not work and the computer reacts like a click. So I returned to the old driver and button works. But Windows Update continusly updated the driver (I disabled the option in the advanced settings, but it still update) and I come to every time.

    So I tried to reinstall Wndows freshly (not update Windows 8.1) and with the old driver works, but when she updates to 19.0.19.1, the button to turn off the work stoppage.

    I looked on the interent and someone tips to set minimum detection of palm. I tried but it still not working.

    I hope someone can help me

    Concerning

    Hello

    If you find that the old Synaptics driver works Ok, install it and then use the utility on the following link to prevent Windows 10 to automatically update again.

    https://support.Microsoft.com/en-GB/KB/3073930

    Kind regards

    DP - K

  • Hi, where is the button quickweb on the pavilion g series

    Hi iv had the hp pavilion series g model No. A9J83EA #ABU and I can not find the quickweb button, can someone help... Thank you...

    This document dΘcrit the QuickWeb and how to use it.

    However, it is not really show where the button should go from an engine out of State.

    On laptops that support QuickWeb, the button is usually above the keyboard to the left with a symbol of the planet.

  • What is the button just to the right of the button power on the Pavilion laptop?

    What is the button just to the right of the button power on the Pavilion laptop and what is its role?

    Hello:

    Here is the link to the maintenance and care for your laptop computer guide.

    http://h10032.www1.HP.com/CTG/manual/c03043778.PDF

    Please see Chapter 2, pages 11 and 12 show the buttons and label them. The button to the right of the power button is revealed to be a button to launch the web browser.

    Paul

  • Pavilion 23xi: my hp Pavilion keep showing the power button lock I tried all the solutions again, it won't work

    Hp power button held for a minute and the cord broke off electricity by holding down the power button and it's always the same problem in not falling is not on what can that I please

    The button lock feature works / stop is set by pressing the power button for 10 + seconds.  It is deactivated again by pressing the power button for 10 + seconds.   That's all there is to it.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • HP Pavilion g7-2270us: the drawer won't open when I push the button!

    Hello world! I've had my laptop for a couple days now, and I love it! Today, however, I tried to burn a disc and realized that when I push the button on the drawer to open it, it will not open.

    It opens, however, however; I can go to computer > right click on the disk driver > Eject and the drawer opens fine. The button is faulty?

    I mean, it's not that bad, and if that's the only problem, I can deal with it. It will not worsen, is it? I should myself with replacement?

    Thank you in advance!

    Also, I apologize if this is in the wrong section...

    Hello

    It looks like a mechanical fault with the mechanism of the optical drive.  While this may very well not cause other problems, because it is a whole new machine, my best advice would be to just return the phone to the retailer, it was purchased at and get a replacement.

    Best regards

    DP - K

  • Pavilion 15-P290NO: how to change the function of the buttons behavior in Windows 10

    I just received my new laptop (a Pavilion 15-P290NO) the other day and installed Windows 10 top immediately. Now I can't figure out how to change the behavior of the function keys so that I won't have to press the fn key if I want for example to use f2 for other functions that turn down the brightness of the screen. Instead, I want him out if I for some reason any really want to turn down the brightness, I hold the fn and f2. At this point, I am open to almost any suggestions.

    Hello

    Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the Bios ( f10 ) option, and then change the figure in the document at the following link.

    http://support.HP.com/us-en/document/c02035108

    Kind regards

    DP - K

  • Desktop Pavilion a1230n

    I have a Pavilion a1230n and want to upgrade memory. What is the maxium. I see four locations and two different colors.

    maximum memory for your PC is 4 GB.

    Best regards
    ERICO

  • Pavilion a775c power/reset button?

    I have an old hp Pavilion tower which has a motherboard BioStar inside.

    The other night, I was doing something when the screen went black and the light on the power switch will Flash yellow.

    Run fans, that the monitor only stop blinking when connected to the video card. the fan on the card, so I guess that the card is good. As an additional check to ensure that the card is good; My son-in-law has hung the tower with its monitor, using its video card, still nothing.

    Take off the lid of the Tower, I noticed that there were only connectors on the power pins on the front panel to the motherboard.

    My thoughts on this is the person who has replaced the motherboard did not connect the pw switch correctly and when for some reason, the Commission went into hibernation, and given that nothing is connected the PIN; the motherboard will not be from hibernation.

    My question is very simple, I'm on the right track; and if I am how I connect the original power switch to pro

    empty power switch and reset.

    Thank you very much for your review

    Have a blessed day

    Bob

    (1) is the scenerio of what's not correct? NOT without doubt, as the reset button is rarely used and does not have the computer on low power such as the standby or hibernation States.

    (2) if so, how do I wire the original switch for the reset on the map or what type of switch would I need to do the reset works? Again, it is probably not the case and your problem is probably caused by something else. Please provide details about your problem... What happens when you hold the button in 10 seconds? The computer turns off? What happens if you briefly press the power button? What operating system is installed on the computer? What is plant HP or your technician installed? Etc.

    If you have any other questions, feel free to ask.

    Please click the White Star of KUDOS to show your appreciation

  • Desktop HP Pavilion 500-342nem: can I upgrade my desktop computer hp pavilion 500 with the graphics card AMD RX 480 replacing edge R7

    I plan to upgrade my hp pavilion 500-342nem, who was already A7 graphical 240 with the new 480 RX.

    Is it possible to upgrade both the power supply and graphics card?

    There will be no problem of compatibility (PSU Corsair CX 500 questioned?.)

    I heard a lot of chatter on hp restricting the upgrade of their pc.

    The new card will work?

    Any help will be apppreciated.

    @Jeffrin98, welcome to the forum.

    I cannot find the specs of the product to the computer.  So, here's what you need to do.  Press Start + R from the view of the office.  This will open a run dialog box.  In the box labeled type msinfo32 opened.  In the page that opens, check the option titled Mode BIOS.  If he says UEFI motherboard is supported by the video card.  If this isn't the case, you will not be able to move forward.

    The next step is to measure the space where the card will be installed to ensure that it fits.  Measure from the back i/o port to the front of the case.  This will allow you to see if other ingredients will limit the installation.

    The CX500 Corsair power supply (PSU) should work.  However, check how much power requires the video card.  It may be better to buy a PSU with 600W.  High power will be used during peak power needs.  In addition, the card may require additional power connectors.  Also, I recommend a modular power supply.  It allows you to use only the cables that are absolutely necessary, create better air circulation.  It is very important with more powerful graphics cards.  The heat can be much larger.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • HP Pavilion g6 - Wi - fi button is Orange

    I have recently deteriorated Windows 8 for windows 7 on my laptop HP Pavilion g6 - 2288ca , but now the button (f12) wifi does not work, there is orange.

    I have also no wi - fi drivers installed due to this fact.

    How can I fix this button wifi and is it possible to download drivers on another computer and transfer the files via USB?

    Thanks, help is appreciated.

    Hello:

    Follow these steps, and I'll post the link to the drivers WLAN and bluetooth, you must:

    Go to Device Manager and click on the network controller needing drivers.

    Then click on the Details tab at the top of the control of the network window.

    Now, you see a drop-down list of property and it is set by default to the Description of the unit.

    Drop down on it and select the second item in the list (Hardware ID).

    After the first string of characters that start with PCI\VEN.

    All the other W7 x 64 drivers and software you need can be obtained from the g7z-2100.

    Do not use any BIOS without downloading the firmware for this model.

    The first pilot, you need to install is the amd chipset driver that is located on the link below.

    You want the first driver on the list.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  • Pavilion dv4 1430us: Pavilion dv4 1430us stuck button mute

    The button mute on my Pavilion dv4 1430us is stuck on red, and no sound comes out of the speakers. Sound will come with headphones. When I hit the mute button, it will not change to blue. I tried to download a new BIOS, but that did not work. I think that result to download a bunch of long updates of Windows.
    Thank you!

    Hi @Laurabg7 ,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv4-1430us Notebook and stuck volume knob and does not properly. Here is a link to the HP Quick Launch Buttons that might help.

    After running the update make sure you restart your laptop. Here is a documentto troubleshoot the sound if necessary.

    Please, don't have headset connected when you perform troubleshooting.

    I hope this fixes things with the button and the sound.

    Thank you.

  • HP Pavilion dv7-4190us: touchpad buttons do not work

    Last week, I received two HP Pavilion dv7-4190us laptops from Amazon. Both had the same problem: the buttons on the touchpad do not work. If you hit one of them, the result is the same if you hit the main part of the pad. Affecting the buttons in a particular function does not work. I checked in the Information System, which showed the touchpad as having 0 buttons. I spent over 2 hours on the phone with HP support, but they were unable to resolve the problem. I sent two computers laptops back to Amazon, ask for a refund. It's a shame that these otherwise great computers are rendered by this problem, making them unacceptable for me.

    It turns out that the buttons on the touch pad work. The result of this 'problem' is my confusion over the operation of these buttons. On this touchpad (which is not like the others, I've used so far), the buttons are flush with the surface of the touch pad, and they do not respond to touch, but only in the same way as a button on the main part of the pad. The fact to the specific button functions, to firmly press a button. I found this by reading the answer to another user who has reported the same issue. I hope this can help to avoid confusion of someone else in the future.

  • HP pavilion dm4-2180 wireless button does not illuminate

    Following this element thead (http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/hp-pavilion-dm4-2180-bezel-repl... I ended up going in a store of the local computer where they fixed the problem of the screen. I have it powered by the store and everything seemed ok, just that when I got home realized that the wireless button does.

    Checked well the post on the forum about similar issues, but may not know what the problem is.

    1. default bios does not resolve the problem

    2. the correction with hard power the laptop, remove the battery and pressing the power button for 30 seconds to drain the capacitors nor

    3. the button is always orange, if I press it for a few seconds, the message "unrecognized usb device" is displayed

    4. the wireless adapter does not appear in Device Manager, or I get the error message on the current arrangements (only on the unknown device in the usb controllers)

    Is it possible that is a material error, when technicians open the computer the wireless card has not properly been connected?

    Hello @PedroAAndrade,

    Welcome to the Forums of HP Support!

    I came across your post about the WiFi problem and wanted to help!

    It is possible that the problem may be hardware related.  You can try to check the WLAN Module, to see if it properly connected.  You can use this guide to help you, if necessary:

    HP Pavilion dm4 Entertainment PC - Maintenance and Service of Guide (Chapter 4, Page 40-42).

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • New power supply for Pavilion a1230n

    I need to replace the power supply on my Pavilion a1230n.

    The current source is a Thermaltake TR2 430W (430 watt), model number W0070RU).

    I would like to find a better diet quality and rated at 500 watts continuous.

    Food will sit just above the case without space above it. So I need to have a power supply either a front opening, or an opening on the bottom.

    Thank you

    Lewis Neal

    wnlewis,

    Satisfy your request and specification:

    Rosewill 530W continues: http://www.newegg.com/Product/Product.aspx?Item=N82E16817182199

    600W Corsair:http://www.newegg.com/Product/Product.aspx?Item=N82E16817139028

    BTW > both install the fan down and are shorter the 430W have you now 3/4 ".

Maybe you are looking for

  • PCI-4065 desperately slow

    Straight out of the DMM examples. The acquisition rate faster than I can get is about 1 per second reading. PCI? This is not acceptable. I get more quick purchase of a serial device. Someone knows how can I speed things up?

  • How do I change my langueg

    How chnge my langueg

  • HP ENVY TS m7 Notebook PC - no audio after update of SP63407 and SP63555

    My computer is an HP update this morning and installed SP63407 and SP63555 for IDT High Def Audio Driver and I have no noise since.  It is running Windows 8.1.    I did reboot but stil no sound.   Please notify.

  • Help, please! HP Pavilion Notebook PC g6-2112he (crashes)

    Please can someone give me a solution, Hp Pavilion g6-2112he Notebook PC crashes when it is in the windows startup screen, this however started immediately, I installed the balckberry Q10 software on my laptop. 1. the windows will not open 2. I can't

  • T400: Start button / stop does nothing in Vista

    Hello, I start button / stop set to "turn off computer" in the Power Manager settings, but when I press the Vista power button nothing happens. I use Vista 32 bit SP2. The power button turns the computer very well and of course now that it performs a