HP Pavilion dm1 Notebook PC: BSOD

With that still pop when im browsing the net. itll be a great help that you could help me... Thank you

Hey @ultimateathan ,

You should take the laptop somewhere for repairs. Have you tried to follow the document on overheating.

You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop.

When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.

Thank you.

Tags: Notebooks

Similar Questions

  • name of product-HP Pavilion dm1 Notebook PC, you hear no sound after update window 8

    name of product-HP Pavilion dm1 Notebook PC

    product number - QB382PA #ACJ

    After the update for a few days, I could hear the sound of my laptop. now I'm unable to get sound and same card for my sound device. Help me solve this problem. Thank you.

    Hello

    Try the following.

    Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

    Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

    After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

    Recovery Manager - Windows 8.

    Kind regards

    DP - K

  • HP Pavilion dm1 Notebook pc: black screen

    My screen goes black when I start windows 7 on my laptop of Dm1 Hp Paviliom. Also, I have connected my pc to an external monitor via VGA cable, and then I can see the windows operating system in the external monitor. I did a test to start and then I got these results:
    Memory test: past

    Smart check: past
    Dst short: past
    Optimized DST: Software error
    Battery test: primary past secondary - has NOT been

    PCI device control: past.
    -----------------------------------------------------------------------
    Starting test: past

    Does anyone have an idea of this behavior? How can I solve this problem

    Hi @ljuserhpfor ,

    Thank you for visiting the Forums HP's Support and welcome. I appreciate all the information and the results of the tests that you did. I looked in your question about your HP Pavilion dm1-3025dx Entertainment Notebook PC and the laptop does not start. In my view, that the question is called the RTC battery. (Real TIme Clock).  Here isa document to show you how you can replace that.

    If you see things very well on a screen, it might be a bad driver has been installed. You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop.

    When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.

    Hope it will be useful.

    Thank you.

  • HP Pavilion dm1 Notebook: after formatting drive HARD Windows Activation failed

    My laptop (HP Pavilion dm1z-3000) comes with Windows 7 Home Premium 64-bit. My system was full of junk it was not usable. I tried to use the feature of HP recovery, several times but it still fails. So I decided to format and reinstall Windows.

    I got a copy of Windows 7 Home Premium 64 - bit OEM I bought for a desktop computer. Before formatting, I used a software key finder to get the Windows key from the original Windows 7 installed on my laptop, so I could use it to validate the other copy of Windows 7, but I found that I get an error 0xC004F063 code, the computer BIOS missing licence reqd

    Help, please.

    MrN1ce9uy wrote:

    My laptop (HP Pavilion dm1z-3000) comes with Windows 7 Home Premium 64-bit. My system was full of junk it was not usable. I tried to use the feature of HP recovery, several times but it still fails. So I decided to format and reinstall Windows.

    I got a copy of Windows 7 Home Premium 64 - bit OEM I bought for a desktop computer. Before formatting, I used a software key finder to get the Windows key from the original Windows 7 installed on my laptop, so I could use it to validate the other copy of Windows 7, but I found that I get an error 0xC004F063 code, the computer BIOS missing licence reqd

    Help, please.

    Well, this would mean that you have to order the official HP recovery media to restore factory.

    http://support.HP.com/us-en/mediaorder/HP-Pavilion-DM1-entertainment-notebook-PC-series/5032670/model/5051914/softwareitem/646869-001/STEP1

  • driver for BCM20702A0, in the pavilion dm1 notebook

    Where can I get the driver for BCM20702A0? I have a HP pavilion dm1 laptop windows 7 home, 64 bit laptop. Thank you!

    Hello:

    I'm glad you got the webcam to work.

    Because your model is a CTO (set up to order), there is no form for the model you own.

    The best way to know if your model has bluetooth is to go to the Device Manager and look at the list of devices.

    Near the top, there should be a Bluetooth icon (in alphabetical order).

    If it is not a list while there should be a device with one! Mark who need drivers if there is a bluetooth module and the correct driver is not installed, this is what you would see.

    If you don't see all of this look in the Device Manager, most likely your PC did not come with BT

  • HP Pavilion 15 notebook pc: BSOD twice a day...

    Jin

    I get BSOD twice a day. tied screem shots. Today it has begun to blur the words on the blue screen as on the 2nd picture.

    Thank you.

    UPDATE * just after the announcement, my computer froze for 30 seconds then came up with this message, coud be related to my problem?

    Hi @smash91,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! Thanks for the awesome screenshots , very very useful.  I looked into your problem on your laptop HP Pavilion 15 and BSOD showing twice a day. Here is a link to uninstall the graphics card AMD Cardinal restart the computer after you have done this. It should automatically reinstall the driver.

    You could go to HP to get the drivers for your model.

    Please let me know how it goes.

    You can say thanks for trying to help by clicking on the Thumbs Up below! .

    Thank you.

  • Pavilion Dm1 notebook Youtube, any video player, jerky playback

    HP Pavilion dm 1

    APU AMD E-300 with 1.30 GHz Radeon graphics card

    6.00 GB Ram (5,60 usable)

    64-bit operating system

    Windows 7 Home Premium SP 1

    Drive hard solid state

    for months after obtaining this laptop I blamed Youtube for playback of gravity was

    now that I have time to try to watch movies, I find that if I try to play any movie via a file of 700 to 800 MB in size, the video playback is choppy as well as with a CPU maxed out.

    What is it?  Shouldn't this machine be able to handle video files of 2 GB?  I would not be able to play a youtube video on full screen?  Rental video buffer does not help.

    Hello

    Product drivers list is available here

    Please ensure that all drivers are updated from the link above.

    Please select and install the drivers. I see that the chipset drivers are not listed for your PC. However the same is available as a direct download from here

    FTP://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54645.exe

    Good luck!!!

  • HP Pavilion dm1 Notebook PC: no application upgrade for windows 10

    I don't have the application of upgrade of windows 10. I also had problems with upgrading to windows 7, although it seems to have fixed itself.

    MS showed no perceptible tendency on the plan which received the upgrade of Win10 application.  If you want to upgrade now, then use the tool of creation of media since the link and choose the option to upgrade the PC: http://www.microsoft.com/en-us/software-download/windows10

    But until you do that, you should seriously consider making an image backup of your PC - because the GoBack function is known to be unreliable.  Suggest using Macrium Reflect:

    Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.

    What I recommend is the following:
    (1) download and install Macrium reflect (MR)
    (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup on an external drive
    (3) use the option to create a CD or a USB startup key

    NOW, you have the means to restore a full functional system of externally by car in a few minutes only.

  • Pavilion DM1: Problems upgrading to Windows 10 on HP Pavilion DM1 Notebook

    The portable computer is currently running Windows 7 Professional, and I ran the upgrade of Windows 10.  It goes through the first installation and re - start and then on the second phase, when it is installing the drivers, it gets to 71% and restarts with a blue screen, I think that showing as TENT RUN OF No. EXECUTE MEMORY, but it is not very long, so I do not know and rolls to Windows 7.  I tried to disconnect external devices, try a clean boot, tried to update all the drivers, disable wifi and leaving on a single connection to the local network without success.  I managed to last updated desktop for Windows 10 with only a little difficulty even if Windows has decided the display driver is not compatible, so it is a real headache.

    Thank you. No, Kaspersky has not been installed, and I never installed it. Is used by McAfee, as sometimes it comes with Acrobat Reader? I installed once in an update and it removed immediately. Anyway, I found this file registered twice in C:\Windows\System32\Drivers and in a subfolder, it was not related to any existing process so I removed it, tried the upgrade again and he completed this time. If for any other person having this problem find the name of the file after ATTEMPTED RUN OF No. EXECUTE the MEMORY when the blue screen appears, which is very short and then delete this file. In my case it was kl1.sys. It was not however reflected in the report which appeared after system restored to Windows 7. Problem solved.

  • 4300sa DM1: notebook drivers - is not available or cannot find them

    Hello, I have a laptop 4300sa DM1.

    It comes with Win8 and was slow as hell (just using the internet) so upgraded to Win10 with the new facility.

    Still slow so suspect drivers obsolete, etc.

    Laptop is almost unusable with processeor operating at 100% for minor tasks (I have not installed anything funny) Windows updates only.

    Research on the HP website, it can not find the drivers for my laptop and recommend only to use Windows Update.

    Great, but Windows update not will not check my BIOS etc then where do I go from here?

    BIOS: Insyde F.14 10/02/2012

    AMD APO E2-1800

    Radeon HD 1800 graphics card

    4 GB of RAM installed

    3.6 GB total

    Available 1.63 GB (which seems strange to me?)

    Thank you

    This is the page for Windows 8.1 driver:

    http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-DM1-notebook-PC-series/5296074/model/5305957

    F.29 BIOS can be found on the Windows 8 page:

    http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-DM1-notebook-PC-series/5296074/model/5305957

    The problem is not drivers or BIOS is the processor AMD E2. Just not up to par, I'm afraid.

  • Pavilion DM1: Upgrade hard drive

    Not a problem, but a solution for those who seek to increase the capacity of their PC laptop.  I was running out of space on my Pavilion DM1 Notebook.  I saw that price had descended on the disks hybrid and bought a Seagate 1 TB computer laptop SSHD SATA 6 Gbit/s 64 MB 9.5 mm HDD and a 2.0 black external enclosure USB Hard Drive for HDD SATA 2.5 in and cloned drive using Macrium Reflect www.macrium.com. I went the readers and extend the partition using the Partition Wizard Creation of www.partitionwizard.com. The laptop works perfectly, so something a little faster because of the part SSD disk in combination with Windows 10.

    The solution ultimately is to buy a Seagate 1 TB computer laptop SSHD SATA 6 Gbit/s 64 MB 9.5 mm hard drive and a 2.5 in. 2.0 black external enclosure USB Hard Drive SATA HDD and clone the drive using Macrium Reflect www.macrium.com. Remove the old drive and install the new 1 TB drive and extend the partition using the Partition Wizard Creation of www.partitionwizard.com.  Keep the old drive as a backup copy in the 2.5 in USB 2.0 External Hard Drive Enclosure.

  • Pavilion dm1 that suddenly will not find my wireless network.

    Hello

    I have a Pavilion dm1 notebook, running Windows 7 32 bit which is suddenly unable to connect to the wireless network. I know that wireless works very well as other devices are plugged on, and it works very well for the last few months. I connected the netbook directly on the modem with the cable.

    The wireless switch is on - watch the blue light on the wireless key. I tried to turn the computer and the internet router / wireless market of several times. When I click on the network key in the toolbar, it does not give me the ability to scan for WiFi networks, and when I try and set up a new network of the only option it gives me is using DSL/cable broadband.

    I have tried many 'solutions' to try to get a chance to see a wireless network but no luck.

    Any help would be appreciated!

    Thank you.

    Completed by reinstalling the latest drivers and all of a sudden 10 wireless networks appeared. Did not work the first time I tried it but good! Second time lucky.

  • HP Pavilion dm1-4000au Entertainment Notebook PC_Keyboard and Touchpad suddenly stopped working

    Hello

    I have a HP Pavilion dm1-4000au Entertainment Notebook PC (QG411PA) running Windows 7 ultimate 32-bit for more than two years already. During these periods so far, whenever my laptop is idle for an hour or two, the keyboard and the touchpad suddenly stops working, without worrying if his operation on battery or AC.

    I always ensure that I have an external mouse in order for me to navigate correctly and pull up the screen keyboard to type when this issue arises.

    Everything seems to be updated regarding the Windows updates and I even reformatted, but issue persists.

    What point particular I feel a harware problem? Maybe a software problem? Or maybe a defective model?

    Your prompt response is much appreciated.

    Sincerely,

    Led

    Dear customer,

    Welcome and thanks for posting your question on the Forum of Support HP

    Looks like you are facing difficulties to solve problems with your laptop Touchpad

    We will surely help you with this

    Steps to drain the static charge and load the BIOS default settings to solve the problem

    Step 01. Turn off the laptop

    Step 02. Disconnect the power/AC adapter and also remove the battery too

    Step 03. Press and hold the power button of the laptop for a minute

    Step 04. Now re - insert the battery back in and plug again the power supply/adapter

    Step 05. Start Notepad and keep pressing the F10 key during startup to access the BIOS

    Step 06. Once you get the BIOS, please press F5 or F9 key to load the default settings for the BIOS

    Step 07. Now press ESC/ESC. Save Changes and Exit - Yes

    Step 08. Now, please wait until the unit load the Windows operating system

    Now please download and reinstall the drivers from the touchpad for your laptop on the Site of HP Support

    Please click on this link to find several troubleshooting steps to solve this problem

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    Although I am an employee of HP, I speak for myself and not for HP

  • Pavilion dm1-3210us Notebook PC - RAM upgrade

    I have a Pavilion dm1-3210us laptop and want to upgrade the memory.  It came with 3 GB (a 2 GB and a 1 GB memory modules).  Can I replace the 1 GB with a 4 GB or which will cause problems?  I'm running Windows 7 64 bit and my manual says the laptop will have up to 8 GB of RAM.  Thanks for your help.  .. .and where the best place to buy at a decent price?

    Hello

    To ensure that you get any compatibility issues, it is usually best to install corresponding Modules - see the link below for a 2 x 4 GB kit.

    http://www.crucial.com/store/listparts.aspx?model=Pavilion%20dm1-3210us&cat=RAM

    Kind regards

    DP - K

  • HP Pavilion dm1-4401sa: HP Pavilion dm1-4401sa Notebook PC Windows 7 drivers (new)

    I am hoping somone can provide me Windows 7 drivers for my Pavilion dm1-4401sa. On the site, the only one available is for Windows 8 I posted before and received in drivers for dm1-4170us, which did not work.
    Help please!

    Hello:

    See if they work...

    1. install the amd chipset drivers and restart.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

    2. install the AMD graphics driver and restart.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111219-1&cc=us&DLC=en&LC=en&OS=4063&product=5275376&sw_lang=

    3. audio: try this one...

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103764-1&cc=us&DLC=en&LC=en&OS=4063&product=5275619&sw_lang=

    5 Ethernet: DL and install the driver of the second (3rd point) on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

    Card reader: DL and install the driver first on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

    Webcam:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-113943-1&cc=us&DLC=en&LC=en&OS=4063&product=5275376&sw_lang=

    Fn keys:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104698-1&cc=us&DLC=en&LC=en&OS=4063&product=5275376&sw_lang=

    I don't know what your model contains wireless card model, so please do the following steps and I will understand this and post links to the BT drivers and wireless you need...

    Since there is no driver installed wireless, we need a labeled device network controller in Device Manager in the category other devices.  The network controller device will be a little! mark next to him.

    Thus, to find the network controller device, click on that and then click on the Details tab.

    Now, you see a drop-down list of property and it is set by default to the Description of the unit.

    On this list and select the third element (Hardware ID).

    After the first string of characters you see in the window.

Maybe you are looking for

  • PSC 1315 does nothing

    Hello. I just brought a range of printers HP psc 1315.  It is true that it is second hand but it should do the job, that we want to do.  However, when I plug the printer in, all the lights on the Panel on top remain on as well as a number of 8 in the

  • Spooler Subsystem App stopped working and was closed. Only for pdf files?

    I tried the system restore, delete the registry files, and then reinstall, the utility hp diagnostic tool and solution of chan, but none have worked. It seems to print ordinary web pages fine, but I get this error when I try to print a pdf file, if i

  • startup programs do not work and windows Defender is disabled (error code is0x800106ba)

    I can't turn on windows defender and the error message is (windows Defender encountered an error: 0x800106ba.) A problem caused this program service stop. restart the service to start your search in Help and support or your computer how to start a se

  • Prior import registry variable

    Is it possible to get a record that includes registry variables as they were a few months back? Our registry variables became corrupted somehow and I want to import an old configuration.

  • Windows failed 10 updates to windows 7 now get no real software

    I just tried to improve my windows 7 PC for 30 all the time, she finally got to the end and then failed. He then told me it was back for W7 and after that he now tells me that the software is not genuine. I like windows, but try to level has been goi