PSC 1315 does nothing

Similar Questions

• HP PSC 1315 does not work on windows 7

  I recently got a new PC with windows 7... I downloaded the driver for my printer (HP PSC 1315) of the HP site, but my PC does not answer with my printer.

  In the HP Solution Center it recognises my printer and shows that it is plugged in and on, but in "Devices and printers" represents a yellow mark at the printer.

  I tried everything, uninstall and re-setup, manual of rights even tried admin identify processes.

  Hello

  Please pass below for the info

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=hardware&p=HP%20PSC%201315%20All-in-one%20Printer&v=HP&UID=Q5765AABA&pf=0&PI=0&s=HP%20PSC%201315&OS=64-bit please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• printers HP psc 1315 does not work with windows 7

  BOTTOM of my son recently gave me an Acer computer

  PROBLEM I can't get my printer to work with this computer... I changed the default printer (HP Laser Jet P2050 Series PCL 6) at the mine and get a troubleshooting message... have also a red light flashing next to change cartridge and one beside copies.

  Hello

  ·         What happens when you try to print?

  ·         What is the code or an exact error message you get?

  ·         What operating system is installed on the computer?

  Method 1:

  Run the fixit provided in the link below and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2:

  I suggest that you install the latest driver for the printer and check if that helps:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=374568

  Method 3:

  You can also uninstall the printer and then install and as a default and check if it solves the problem:

  Add or remove a printer

  Change your default printer

  Method 4:

  You can also check out the link below, because it addresses similar issues:

  http://h30434.www3.HP.com/T5/other-printing-questions/sudden-print-cartridge-error-for-PSC-1315-unsolvable/TD-p/277223

• HP PSC 1315 Officejet series: the officejet HP PSC 1315 software installation disc does not start

  I'm trying to install the software for a HP PSC 1315 all-in-one officejet on an XP pc. When I put the disc in the CD/DVD drive, that it will not start. When I click on SETUP. EXE it does not start. Tried the drive in another laptop (Win10) and office (Win10) and the drive would go. I put the diskettes for installation of two other programs in the XP and two ran. I downloaded the Setup file of the Support of HP and he wouldn't either. Anyone know what is happening here?

  Hi @jonessbl,

  That will be better answered by the @Dellpeople.

  Thank you.

• PSC 1315, not paper feeding

  recently reinstalled my psc 1315 and installed new ink cartridges.  It is "sounds of printing", but the paper does not feed.

  Hello
  
  This article covers book food issues and should solve your problem. Give the steps described a shot and tell us if it helps.
  
  Good luck!

• PSC 1315 all-in-one: paper jam

  My wife was going to print something from our computer and the printer took several leaves inside. It jammed so she shot just leaves in the front now, our computer said there is a paper jam and will not print we. I went through all the steps of the Glade, restarting, etc. that I've read in hp and others who shared their problems. It copies and analyzes very well. The computer tells me that there is a jam. Could have broke us something by pulling the paper to the front?

  Thank you

  Oldfud

  Hi @oldfud

  Welcome to the Forums of HP's Support. I understand your computer continues to tell you that there is a paper jam. I would like to help.

  It is possible that something has been damaged. Although it could be a "hiccup" with the software on the computer. You can try running the HP Print and Scan Doctor. This will check the software. If the problem persists, try this document a view of the "Paper jam" error HP PSC 1315, 1315v, 1315xi, s and 1318 1315 all-in - One Printer Series.

  If you have any questions, or if this does not resolve the problem, let me know.
  If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

• PSC 1315 wireless

  The "HP psc 1315 all in one ' can print wireless using Windows 10?

  No,

  The PSC 1315 only provide a USB connection, it does not offer the capabilities of network.

  You can find the specifications below:

  http://support.HP.com/us-en/document/c01578373

  Shlomi

• PSC 1315 + seven 64 bit error scanning

  My setup is a Hp Pavilion with win seven 64-bit (with all the latest updates) and a psc 1315.

  It still works fine with the HP software but now I'm trying to scan a document to a pdf file and I the situation below:

  Windows not in use HP scanner, the scanning starts but it is very slow and when she finishes the software gives the error below.

  I try the following without result:

  -changing the mode to save (tiff, jpg, ecc) and the scanning resolution

  -restart the pc and printer

  -uninstalling and reinstalling the driver from hp and corrective software and more recently

  -performing HP print and scan doctor (everything is ok for him)

  The only way to do a scan now is directly with the windows software.

  Any ideas to solve the problem?

  

  Hello, I read the proposed guide, I'm in the first case, all versions of Flash are updates, 12,0,0,77.
  According to the guide, I have only to reinstall Hp software but I just did.

  I also ran the patch that you set (and rebooted) but nothing is changed.

  Edit:

  I am remembered that some time ago I increased the font size in windows (DPI resolution of 100% to 119%).
  Now, I tried to get back to 100% and now the HP software works well.

  At this point, I changed to new resolution to 119%, and however it works well.

• Error printer HP PSC 1315

  I recently started work on a Dell Windows 7 computer, and it seems that there is some kind of problem (error 0X000000c1) with the printer drivers for the HP PSC 1315 all-in-one that occurred after the installation of MS Office 2010.  The scanner still works fine, so I know this isn't a problem with the USB connection to the computer, but whenever I try to print a test page, this is the error that is displayed.  I tried to reinstall the most recent drivers and nothing seems to work, nor was I able to find anything online for this error.  Any help would be greatly appreciated.

  Thank you Zig, for your very useful and informative answer.  I was actually able to understand it on my own, but only for the benefit of other readers, I'll post below how I did it.

  -Open the menu START, right-click on "Computer" and select 'manage '.
  -Expand the "Services and Applications" tab, select "Services".
  -Scroll down to "Print spooler", then double-click on it to open properties of spooler.
  -Open the "Dependencies" tab to see what specific components that need to be enabled for printer to work properly.
  -Locate each of these components in Services' and either activate or restart the service.
  -Close the window, restart the computer and voila, the printer worked once more.

• For psc 1315: before you can use this feature, OneNote 2010 must start for the first time.

  I installed the downloaded software (Windows 7) for my old psc 1315 (all-in-in-one). It printed the page sample after installation, but when I want to print what this or else it gives me the following message is displayed:

  "Before you can use this feature, OneNote 2010 must start for the first time."

  Restart the PC does not solve the problem either. How can I get the printer to work?

  Hello pietpompies7

  See the following Microsoft Office Blog article. It deals with OneNote arise while you try to print.

  Microsoft OneNote is misuse of your print jobs?

• Cannot print/connection of Windows 7 for shared PSC 1315 on the XP Machine

  I have a HP PSC 1315, connected to a computer running Windows XP (32 bit).  This printer is shared.  I can access it from other XP machines on my home network.  I can't access it from my computer Windows 7 (64-bit).  I can see the printer is shared on the computer, but when I double click on it, I get the following error:

  "Windows can't find a driver for hp PSC 1310 series on the network."  To locate one manually, click on OK.  Otherwise, click Cancel and consult your network administrator or the printer manufacturer's Web site. »

  Then I tried to download the driver Windows 7 (64 bit) of HP and installed on my Windows 7 machine:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&LC=en&DLC=en&cc=CA&...

  At the end of the installation, it asks to connect the printer to the computer via USB.  Because I'm not physically the printer connected to the Windows 7 computer, I check the box that says I can't login now and go forward at the end.

  Then I tried to connect to the printer and I get the same error.  I try to locate a driver manually.  I point to c:\windows\inf\ without success (I am * if * the driver info might settle there, but I don't know what the name of .inf).  Windows says that it cannot find an appropriate driver.  Maybe I should be looking elsewhere?

  I found some troubleshooters on the HP website, but it does not give "shared printer on a network" as one of the schemes to solve connection problems.

  I'm a little confused on this one.  Hoping that there will be something simple, I missed.

  Thank you!

  Hello

  Kahless wrote:

  I have a HP PSC 1315, connected to a computer running Windows XP (32 bit).  This printer is shared.  I can access it from other XP machines on my home network.  I can't access it from my computer Windows 7 (64-bit).  I can see the printer is shared on the computer, but when I double click on it, I get the following error:

  "Windows can't find a driver for hp PSC 1310 series on the network."  To locate one manually, click on OK.  Otherwise, click Cancel and consult your network administrator or the printer manufacturer's Web site. »

  Then I tried to download the driver Windows 7 (64 bit) of HP and installed on my Windows 7 machine:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&LC=en&DLC=en&cc=CA&OS=4063&product=374568&sw_lang=

  At the end of the installation, it asks to connect the printer to the computer via USB.  Because I'm not physically the printer connected to the Windows 7 computer, I check the box that says I can't login now and go forward at the end.

  Then I tried to connect to the printer and I get the same error.  I try to locate a driver manually.  I point to c:\windows\inf\ without success (I am * if * the driver info might settle there, but I don't know what the name of .inf).  Windows says that it cannot find an appropriate driver.  Maybe I should be looking elsewhere?

  I found some troubleshooters on the HP website, but it does not give "shared printer on a network" as one of the schemes to solve connection problems.

  I'm a little confused on this one.  Hoping that there will be something simple, I missed.

  Thank you!

  Here's a good explanation of how to share a printer from an XP PC to Windows 7 PC on a network home.  It should work since Windows 7 (64-bit) PC can see the partition Windows XP 32-bit.  What you missed was the type of port to use for the network connection.

  Best regards
  ERICO

• HP PSC 1315 all-in-one printer

  Everytime I turn on my printer it prints a test page.  How can I stop doing this and waste?

  HI - follow the steps in this post:

  http://h30434.www3.HP.com/T5/other-printing-questions/PSC-1315-how-to-stop-test-page/m-p/136906#M8915

  Probably what you see is an alignment page.  This message will provide details to solve the problem.

  Hope that helps.

• Menu assistance does nothing, anywhere URLs in emails

  Thunderbird is failed URL in the Firefox browser, and the Help menu does nothing. Probably, it is the same problem. Very good mail downloads, Firefox works fine. Firefox is 42.0 Tbird is 38.3.0 and it is a new operating system Windows 10.

  Hi, I could operate as follows:

  1 closed Thunderbird and Firefox. Went to the Windows 10 start - > settings-> system-> Default apps and changed the web browser by default for Microsoft Edge.

  2. restart Windows. Started with Thunderbird and I tried the help-> contents of aid that has worked, bringing Microsoft Edge with the help of Thunderbird page. Also clicked on a link in an email and he worked leading to the top of page links in a new tab in the browser of Microsoft Edge.

  3 closed Thunderbird and Microsoft Edge. Went to Windows 10 start - > settings-> system-> Default apps and changed the web browser by default in Firefox.

  4 restarted Windows. Thunderbird has started and the help and links in messages worked when you click on get a new tab in Firefox, as expected.

  So I guess that the problem is solved.

• The download arrow button down is visible, but does nothing!

  Hi, until yesterday, I could click on it to view the current status of download. Now only ctrl + J works, (never used this before today) but it opens a new window and is not what I would call a fair vs shortcut by clicking the arrow. The button still animates when click on it, but does nothing...
  Someone knows why this month that's happened?

  Hi FInku, please try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

  Thank you

• Cannot open in a page Web, on the page of the Bank opens a new tab and indicates that the site has moved here, but when you click on the button here it still does nothing

  When I go to internet banking as a clydesdale, it opens a new page to connect, but a few days ago it stopped working with the new update. Now when I click on connect, it says "FOUND the document pushed here." and clicking here opens another page of connection, but after being entered the details the page doesn't load. the same thing happens on other sites, on the other, when I click to read the messages page does nothing, and if I click to open in a new tab the same page is displayed instead.

  GundamGirl said

  Theres been other people having this problem too...

  Yes, for example, that this person- https://support.mozilla.org/questions/1078226 -, but they did not post cost around if any suggestion made a difference, I appreciate your following upward.

  Here are two other things to check:

  (1) connection settings - have they been customized?

  "3-bar" menu button (or tools) > Options > advanced

  Click the mini network, and then click the settings button

  The default value of 'Use system proxy settings' should follow your 'LAN' setting, as well as IE, but you can also try 'No proxy' to see if that makes a difference.

  (2) extensions - test Firefox to turn off Safe Mode

  Firefox Safe mode is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  Does not work if Firefox: Hold down the SHIFT key when you start Firefox.

  If Firefox is running: You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  and OK reboot.

  Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

  Any improvement?