HP pavilion dv6-2010sa overheating once, now screen is not working

Similar Questions

• Webcam and hp pavilion dv6-3022us notebook pc usb ports do not work.

  I already tried to uninstall ports in Device Manager. Tried to take out the battery. Also tried to disable the USB Legacy Support. That did not work. This laptop came already installed with Windows 7.

  Updated graphics driver amd and now the usb ports work.

• Re: Installed update the BIOS for my Pro Satellite L300D and now screen does not work

  Hello

  I installed the update of the BIOS 3 days ago, I had a few programs that are open at the time and also an external USB mouse in time. The hard drive crashed and then blacked out, but the power was still on the turbine runs at full skin. I tried to turn off the computer by the power button, but it wouldn't, so I let it run out of battery. Since then, the computer seems to turn on but the screen has been blackened since then, I can't see what the State of the hard drive is in.

  Any ideas?

  Hello!

  Oh dude, it looks like that your ROM module is damged due to a defective BIOS update :(

  A BIOS update should normally * do not get with the implementation of substantive programmes (also antivirus). I think that's the reason why the n t successfully update.

  However, you can do nothing. You will need help from a technician for laptop that can try to reflash the ROM module On the Toshiba page, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good bye

• Pavilion dv6-2155 overheating

  What makes my hp pavilion dv6-2155dx closed. the black screen says that it was overheating. occurs usually when left to some website but not a surf.

  Hi @bair ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook dv6-2155ee and overheating problems. Here is a link for troubleshooting overheating on the laptop.

  I recommend to restore default BIOS. You can restore the BIOS with this document by selecting reload the default BIOS settings. This will restore all the settings back to the original if something has updated and working properly with the fans causing overheating.

  I hope this helps.

  Thank you.

• Pavilion dv6 stuck on starting windows screen

  Pavilion dv6 stuck on starting windows screen.

  Memory test: past

  Smart check: past

  DST short: FAILURE

  FAILURE ID: 60FTV0-5KS6SG-MFH14J-60UH03

  PRODUCT ID: LF1374AV

  Hard drive 1

  Help, please. I bought a new internal hard drive. But I have no recovery disks.

  Thank you

  XPJ

  Hello

  There are two options available.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 another option, if you came to laptop with Windows 7, you might consider is to create your own installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( must be the same version - i.e. Home Premium.) Professional etc. - initially supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Image is Digital River.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are from here.

  Best regards

  DP - K

• Pavilion dv6-2010sa Notebook: RAM upgrade

  My HP Pavilion dv6 is really slow (especially when you use the internet with more than a couple of tabs open. I did a full audit of viruses, spyware, etc. - all clean. However, when I checked the system I have only 3 GB of RAM (2.75 usable).

  Increase the RAM would make a significant difference and if so what is the maximum I should buy (which would be effective)? It would also be very helpful if you can give advice if I should run extra RAM with what I already have or if I have to replace it. Finally, if you could tell me the name of the RAM should I buy and where can I buy it.

  Thanks in advance.

  Ben

  It will run up to 8 GB of RAM. This is the laptop DDR2-800 memory. This video shows the replacement of hard disk and memory so just pay attention to memory:

  https://www.YouTube.com/watch?v=koynICXjbzI

  DDR2 is very expensive. Here's the manual for your dv6:

  Manual

  Here is the Kingston showing page guaranteed compatible RAM:

  http://www.crucial.com/USA/en/compatible-upgrade-for/HP-Compaq/Pavilion-DV6-2010sa

  As you can see, 8 GB is well over $200. Personally, because I'm cheap, I would buy a single module of 2 gig and increase the total RAM of 4 GB or, to be sure it works with maximum efficiency, buy a 4 GB kit if you have 2 identical bars. A 4 GB kit is 'only' $ 56, and it is a reasonable investment. 4 concerts will be significantly better than 3. You might also think of a reinstallation of the operating system. Computers a naturally slow down with age that the registry fills up with junk. There are a few settings, you can clean up the start menu and other things less an OS reinstall.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Problems with the DVD on Pavilion dv6-2010sa

  HP Pavilion dv6-2010sa laptop computer (under Windows 7 x 64), I bought less than a week ago.

  I started the disk recovery software to back up my OS in the event of future disasters.

  I used a DVD + disc, so it would take 3 discs to do the recovery disks.

  First DVD completed successfully. Software asked me to enter the disk 2.

  This is where I started to have problems.

  Drive recovery software couldn't recognize my blank dvd +.

  The drive makes a lot of noise, but then stopped making noise.

  I tried a few other DVDs +, but to no avail.

  I rebooted the computer laptop and tried but same problem.

  So I tried to play a dvd movie to see if it was the disk recovery software or the dvd player.

  He would not play a dvd movie.

  I also tried to play an audio CD but the same problem.

  The drive icon appears in Windows Explorer, but does not display any info (or open the CD / DVD) when I have a CD or a DVD in there.

  So it seems to be a problem with the DVD-> grateful not any CD / DVD

  If someone can advise?

  PS. I searched the driver DVD (so I could Reinstall driver) but the HP Web site does not contain the driver for 2010sa (DVD software only)

  Thanks in advance

  Gary

  Problem solved.

  Uninstall the device dvd player:

  -Device Manager > do a right-click post dvd/cd player > uninstall the device

  Restart the laptop and OS will reinstall the driver and the DVD/CD drive should start working again (well this is what has happened to me)

• HP pavilion dv6-1245dx won't boot screen logo, grid screen, caps lock, shift and numluck work

  * little background, my laptop works well before it happened, I stopped and then tried to power it using after a minute I Gilles down, it starts and then when I try to use internet, the display suddenly blacked out, thought it was the power so I tried to power it again I get is bright with no logo so I turn it on and turn it on again then it became lines graph form tried to check if keyboard works numlock and capslock not working when I press it, ang wireless volume does not work

  HP pavilion dv6-1245dx won't boot screen logo, grid screen, caps lock, shift, and numluck work.

  I tried to remove the battery and press hold power button almost 60 sec to reset the bios always the same, I tried the reinstallation of the memory 2 still the same please help

  problem solved... saw something on the forum about pressing f10 or f11 I randomly pressed start magically work

• I have a hp pavilion dv9205us laptop - Alt print screen does not work

  I have a hp pavilion dv9205us laptop - Alt Print screen (single screen) does not work - operating sys is Vista but XP Professional is my Microsoft application - I can Alt scree printing when I have a keyboard plugged in. - but without the HP laptop has only Prt sc (which is the option further down on the personal key) - without the remote keyboard how can you alt info impression of individual office to another doc. ???

  Thank you very much - it worked, and then just to screen individual, you want to without the entire background behind it - Alt / button FN and Prt Sc then allows me to get that. Once again thank you.

• Acer ft200hql touch screen does not work w / HP Pavilion dv7-5000, Win 7 Pro 64-bit

  After searching for and buying touch screen FT200HQL, it does work with my HP Pavilion laptop dv7-5000, Windows 7, 64-bit.  I have the USB cable is connected (even if it says that it is optional in user's Guide - not an option if you want the touchscreen to work).  I tried it with an Acer, Gateway and an another HP Pavilion laptop (all Win 7), & it works perfectly with them, but not w / mine.  All my drivers are up to date.  (Although there is not driver site Acer for the FT200HQL for Win 7 & I don't think that what they have listed as a driver for Win 8 is a pilot).  A Microsoft Search to ensure the compatibility of the FT200HQL compatible shows and there's nothing I should do.  Help, please!  I really like the monitor & don't want to send again, but I bought it mainly for the touch screen feature.

  Hello Jo,.

  Thanks for posting your question on the Microsoft Community.

  I would like to know some information about the problem so that we can help you better.

  What version of Windows 7 is installed on your computer?

  To check the version of Windows 7 is installed on your computer, please use this link:

  Operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows/which-operating-system

  You can then check the hardware compatibility of the touchscreen with your laptop device.

  See this link:

  http://www.Microsoft.com/en-us/Windows/compatibility/CompatCenter/home

  I suggest you to update the graphics card, and chipset drivers from the manufacturer's Web site.

  Use this link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5051950

  I also suggest you to install the Vista driver in compatibility mode.

  Remove and reinstall this device in the Device Manager. To do this, use the following steps:

  a. right-click on the executable/program of the driver installation file, and then select the Compatibility tab.

  b. click the checkbox before you run this program in compatibility mode for option, and then select Windows Vista from the drop-down list. then try to install the device driver.

  Additional information:

  A touch screen does not work properly after that you resume a computer from sleep mode Windows 7

  http://support.Microsoft.com/kb/2405640

  Windows Touch

  http://Windows.Microsoft.com/en-us/Windows7/products/features/touch

  I hope this information helps.

  Please let us know if you need additional assistance. We will be happy to help you further.

  Thank you

• Qosmio DX730 and Win8 - touch screen does not work

  Hello

  My wife's parents bought a Toshiba Qosmio DX730 (model PQQ11A). They have recently upgraded to Windows 8 and the touch screen does not work now.

  The problem is lack of drivers (the monitor driver reports as a generic PnP monitor).

  I have went on the Toshiba site and selected downloads driver for the appropriate model and installed a number of drivers, including recommended NVidia display drivers. There is no drivers on the site that seem to install support for Toshiba touchscreen.

  Are there no drivers available for this model Windows 8? If not, is there another solution? If Yes, where can I find them. Any help very appreciated because they have nice and bought computer Windows 8 so they could use the touch functions.

  Thank you.

  Hello

  On the page of the Toshiba UE driver you can find drivers for Win 8.
  As far as I know that you will install the Toshiba display driver for the touch function works correctly.

  I found this driver.
  Please check if you can install this:
  [Win 8 TouchScreen software for Qosmio DX730 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 381 & selSeries = 366 & selProduct = 7338 & salt ShortMod = null & language = 13 & selOS = 40 & selType = all & rupload = Yes & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 83418 & O SID =-1 & driverLanguage = 42]

• Satellite L300 - 1-5 - the screen does not work

  Recently, I encountered a problem with my laptop, the screen does not work.
  I tested my inverter of the screen and my backlight lamp to see that if that was the problem, but they both worked perfectly, I then tried the entire screen with the parts and that worked too. (I tried in my friends Toshiba Satellite L300 - 217)

  Then I looked around online and got told to try to connect my laptop to an external monitor, so I did and the screen didn't work there either. So now I'm stuck, I have tried everything even made sure all connections aren't loose etc but it still does not.

  Anyone know what the problem with my laptop?

  Thank you, Tom

  Hey Buddy,

  > connect my laptop to an external monitor, so I did and the screen didn't work there either.
  This means that the internal monitor is ok and the reason must be the graphics card or card mother herself.

  I guess for now, you get only a screen empty and nothing happens on your laptop?

  In this case, you should contact the closest service provider authorized in your country. Just get in touch with the guys and ask for help. They can check the cell phone and fix it! ;)

• Satellite P100-324 - GPU overheating due to fan does not work in the operating system

  Hello world.

  While trying to solve the problem of RAM of 4 GB ([this thread | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=28374&tstart=0]), I meet another weird thing - gpu overheating due to fan does not work in the operating system.

  Now, I restored the XP MCE using the Toshiba Recovery and I was VERY surprised to see that the problem still exists! As soon as loading the system GPU fan stops, and there is only tranquility. The application load is heavy on GPU and reaching 104 results by reducing its GPU and MEMORY clock values and NOT in the activation of the fan.

  The same thing happens in 64-bit gentoo. ACPI can be turned on or off, it is not serious, the GPU fan always dies as soon as the system load. In non-OS environments (bios, program of recovery, etc.) the fan works fine, GPU cooling from time to time.

  This problem occurs in versions of BIOS: 2.40, 4.00, 4.20.

  Any help would be greatly appreciated, since this laptop is my main working tool and I can't let go 14 days (service).

  I saw in your other thread that you have updated the BIOS and you have installed several different OS.

  Fact is that the BIOS v 4.2 package contains BIOS 32-bit and 64-bit OS.
  Your laptop has been preloaded with Win XP MCE 32 bit. Please use the 32-bit BIOS if the original XP MCE running on the laptop.

  Best regards

• Touch screen does not work after Windows 8.1 upgading

  I upgraded my HP TouchSmart tm2 notebook Windows 8 tot Windows 8.1. Now my touch screen does not work, when I touch an app. Also my touchpad do not work. There is no problem when I we an external monitor (without touch screen). I received a message that Assistant HP app is not compatible with Windows 8.1. How to solve this problem?

  Unfortunately, there is no support for the applications of the touchscreen or devices to your laptop under Windows 8 or 8.1

  operating systems.

  This is the touchpad for Windows 7 software

  You can try to install mode of compatibility in this solution provided by Member AttackofZaq

• HPStream x 360 ConvertiblePC 11: touch screen does not work after update of Windows 10

  I updated my computer to Windows 10 but the touch screen no longer works. I've updated the drivers, but there has been no change. Any suggestions?

  Amazing! Problem solved!

  I heard there was a reset function in Windows 10 but I really didn't think he would do anything. The touch screen did not work when I originally did a new install of Windows 10 so why would it now? But he did. My touch screen works well and even better, he deleted loads of disk space.

  To simply type "reset" in the search and recovery option returns to the update & security. 'Start' this PC with Reset and select this option to remove all. After about an hour or two, my computer was fully functional. The downside was having to reinstall applications and files, but is not a major concern.

  Result!