HP pavilion dv6 - my screen randomly goes black

Similar Questions

• Screen guard randomly goes black for a few seconds

  At random times, but especially when I'm using outlook or to access the internet (not always), my screen will go black for a few seconds, then back on, but with the slightly distorted screen. I have connected a new monitor to the computer to see if it was a problem with the monitor, but it always does with the new screen, so I know it's the PC itself. How can I fix it?

  Hello

  What is the number and model of your computer and your monitor?

  Method 1:

  Step 1: check the issue in safe mode:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Step 2:

  Perform the clean boot and check:

   

  http://support.Microsoft.com/kb/310353

  Method 2:

  Try to uninstall and reinstall the graphics driver and check.

  a. right click on my computer, then select Properties

  b. on the Hardware tab, find the button to open the Device Manager

  c. your graphics card must be included under the heading of the graphics card.

  d. double-click the name of your graphics card to open a window of properties of your current card.

  e. tab driver, click Uninstall.

  f. restart the computer and the graphics driver will be automatically installed.

  Hope the above information is helpful.

• I have a HP Pavilion dv6 Notebook PC that goes to sleep a minute after not useven but on ac powe

  I have a HP Pavilion dv6 Notebook PC, which is only several months old.

  When you use the power of my screen keeps going sleep after 20 seconds of non-use. I then have to sign in each time

  How can I fix this please?

  Hello

  Open windows control panel, open personalization, click on the link of the screensaver at the bottom right and in the next window, set the 'Wait' time to 15 minutes and Remove the tick in the box next to "in»the logon screen curriculum vitae  Click on apply, then Ok to save the setting.

  Then again open windows control panel, open Power Options, click Change settings next to your currently selected diet plan plan and set the time to "turn off screen" (for the battery and Plugged In) to 20 minutes.  In addition, set the time to "Put the computer to sleep" (again, in two areas) to you will find more acceptable as long as values that you set values is more than 20 minutes (or you can set one or two boxes forever to prevent sleep in total).  Once finished, click on the button Save changes to keep these new values.

  Kind regards

  DP - K

• Satellite A500 - screen suddenly goes black with a continuous noise

  I have a Satellite A500 age of 2 months - so I'm working on it, screen goes black and there is a continuous noise until I have shut it down manually. What happened a couple of times. No error message.

  I just know that if anyone had this problem or knows what it is before you contact the retailer or Toshiba, if this is the best route to go.

  Thank you

  Hello

  I also own a500 but isn't a problem like yours. I got a blue screen and stop message driver responding. Have you tried to reset to factory settings (F8)? also try to update a graphics driver:

  http://www.nvidia.com/download/index5.aspx?lang=en-us

  http://us.download.nvidia.com/Windows/197.16/197.16_notebook_winvista_win7_64bit_international _ whql.exe

  It is not the page of the Toshiba driver from nvidia.com. I installed it a month ago and given that everything works great. I don't know if this can help, but try.

• Re: Satellite L500-19 X - screen keeps going black

  Hello

  I have a Toshiba Satellite L500 - 19 X and continues to go to the black screen.

  When you start the computer it flashes briefly until start / Boot screen properly before going black right now. Sometimes, the image is displayed correctly for 3 or 4 minutes before also black.

  If you hold down / tilt the screen under a strong light you can see a preview of the ghost of what should be displayed and if you connect an external monitor to the external monitor works fine and you can see a black ghost of what is on the external monitor on the laptop screen.

  I tried to reinstall the drivers, but it had no effect.

  Do you think I should replace the screen inverter Board or just reconnect the connectors screen?

  Thank you very much for your advice.
  Concerning

  Al

  Hello

  First to solve this problem, you must disassemble the laptop.
  I put t know exactly the procedure step by step for the L500 series but this procedure isn't very easy disassembly and you could damage other parts.

  Back to the question.
  It seems that the graphics card is OK and the problem is with lighting.
  Satellite L500 was equipped with a FL inverter Board and LCD joint (no backlight).
  The FL inverter controls the level of backlight screen s and I think that in your case, this part is defective.
  To resolve this problem, he needed to remove and replace the s FL inverter.

• Pavilion dv6: blue screen problem

  

  GET THIS EACH THEN & NOW THE SCREEN AND MUST SHUT DOWN LAPPY. PLEASE HELP WITH THE SOLUTION!

  HI @Ayushi_kh

  Thank you for your response.

  Here is a link to the HP Pavilion dv6 Notebook PC. Please see Chapter 4 for removal and replacement.

  When I was browsing through the maintenance and service guide, I noticed you have switchable graphics.

  That being said, I suggest you do a recovery in factory.  This will reinstall the drivers of graphics cards correctly and I hope to solve this problem.

  Performing a recovery of system HP (Windows 7)

  During the recovery, there is an option to backup your personal data if you do not have a recently I'd do one now to avoid any data loss.

  Restore files that have been supported to the top using HP Recovery Manager (Windows 7)

  If for any reason any recovery did not resolve the issue please provides your exact model of DV6.

  How can I find my model number or product number?

  Good luck!

• HP pavilion dv6-6c01ej: HP pavilion dv6-6c01ej screen display does not

  Hi, I have a HP pavilion dv6-6c01ej, and I want to use the on-screen display to see, for example when the volume when I turn upwards or downwards (also for changes in brightness and so..).

  I looked in programs and features in Control Panel and I saw that I have the latest version of the driver (version 1.3.5).

  I couldn't find the actual prgoram to the start menu (I don't even know if it exists).

  I tried to download it again so I can try to uninstall and install, but the file is not found, using this link:

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55152.exe

  From there:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-DV6-6c00-entertainment-notebook-PC-serie...

  I don't know if it's the same for all driver pavilion dv6 pc.

  Also, I tried downloding the HP MediaSmart for it, but the download failed for an unknown reason.

  So, how can I enable this feature?

  Hello:

  See if this version works...

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_101310_2

• Acer Aspire V5 - screen keeps going black - and the PC is not asleep

  Hello Acer community

  I experienced a few problems recently with my Acer Aspire V5, I made a return to factory settings (full erase).

  I came home today and maintaining the current black screen, even if the computer is not asleep.  I move the mouse and I see the office, but then after less than a second, it goes black again.

  There is no applied screensaver.  It's probably user error, but someone else knows this before and if so, how can I fix without having to go to the repair shop.

  Thanks in advance

  Just in case someone else has the same problem, a few reboots and an update seem to have solved the problem.

• Gateway vista laptop screen keeps going black several times!

  I need Urgent help please. I have Windows Vista Home Premium x 64 Service Pack 2 on a Gateway laptop with model number MD2614u. Whenever my charger is plugged into my laptop, and I'm trying to use my laptop, the screen goes very dark (you can always sort of see it, but its really dark able to work with the laptop). This happens immediately after that I open the lid of my laptop. In order to get rid of the darkness, I close the lid of the portable computer, reopen and instantly the screen goes black again. When I don't have my charger plugged in, this problem will not happen. I also tried the system restore, that does not solve the problem. I appreciate help guys, I really need my laptop works again. For any other information on the laptop required, please ask. Thank you! :)

  Hello draining12aol.com,

  I suggest that you update the drivers for the video card on your computer and check if you have the same problem. You can check the below article which will give you information on how to update the drivers:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Check Event Viewer to see if there is not related to the failure of the system logs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  You can see the link which will help you analyze the entries below Event Viewer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Thank you
  Irfan H, Engineer Support Microsoft Answers

• Pavilion dv6-1215sa screen

  The screen of my HP Pavilion Entertainment PC (Pavilion dv6-1215sa) is cracked. Wanted to order, but I was told of the screen is of two types. Please how to know the type of screen or reference number? Thank you.

  By far, the best way is to simply go ahead and open the housing of the display, remove the existing screen and look at the back of the part number. You will have to remove, in any case. Order the replacement based on the screen manufacturer part number, not the number of the mobile phone model and you will expand your choices and probably find a better price on the replacement.

  Here is the Manual:

  Manual

  This youtube video should be useful:

  http://www.YouTube.com/watch?v=5FDyI-CL7eA

• The program monitor randomly goes black

  First Pro CC uses for months and no problem.  All of a sudden, the program monitor goes black, then back over video transitions between clips, then goes black again.

  I have a HP workstation, with a processor of xenon 12-core, 32 GB RAM, 9 TB of disk storage hard (the first 1 TB flash), blazing fast dedicated with a ton of video memory video card.  It's worked wonders for 12 months and with all the other products Adobe (Photoshop, Lightroom) and hundreds of other programs.  I have NOT changed any video card or video processing settings.   I don't have a hardware problem - it is a problem with Adobe first Pro CC.

  I spent the maximum money on the hardware and the software more later/better (even though I hate paying a subscription for software).  And now this...   Moreover, I understand now and still not a bug, but when the screen goes black in a video software - well, it's like losing your direction while on the highway - it's sort of IMPORTANT - wouldn't you say Adobe?

  I'll scream at Adobe on Monday, but have a serious work that must be done this weekend.

  Is there any help that works?

  You use the latest versions (which numbers?) of Adobe CC?

  Try resetting the workspace.

  Try to update or restore your video driver.

  Try to remove the media cache files.

  Try resetting preferences.

• Qosmio F10 begins with lines on the screen then goes black

  If anyone can help.

  I have a F10
  When I start it, I start with a line pattern funny on the screen that turns into dirrerant models.
  Then after it starts, it becomes black.
  Runns fan and the drive lights work as is it running.

  I can't get into safe mode and it starts properly and the screen does not black.

  This started with the mires funny when I move something one day and when I did a funny little slider occurred.

  Help, please

  Dave

  + I have more information. It will start and run in VGA mode. If I cange to the mode of the display screen is black.
  Could this be a display driver problem.

  If so where can I download a.

• Pavilion dv6-4024tx: display random crashing after upgrade to Windows 10 (back to Windows 7)

  Hey all,.

  I used to own a computer laptop dv6-4024tx Pavilion which I gave to my father to use after you have bought a new laptop for my part. It was in pretty good condition when I gave it to him, with the only problem being that she would get very hot unless a cooling pad was used (which I it comes with). At the time, it was running Windows 7 Home Premium with no problems and everything was fine. However, it might be interesting to note that while I had it I had problems with random blue screens while I was with the latest graphics drivers, so I drove back to the drivers supplied on the support page for this laptop. After I "upgraded" to Windows 10 (do not perform a clean install) for my dad, the laptop would randomly crash and display something like the photo that I have attached, before going empty and show again several times. Believing that it would be a problem with the GPU, I went and Display Driver Uninstaller to remove completely all AMD drivers and software, downloaded the latest driver on the AMD website and installed. It seemed to temporarily solve the problem, but as it's always within 30 days of installation, I offered to go back to Windows 7, but my father wanted to leave it and see how it happened. Oddly enough, for the next month, it never reported the laptop crashing again and the time period for return finally expired. The problem of course back then I tried the same solution from before but the noise continued. I tried to disable the GPU completely from the Device Manager, so that the laptop was running with Microsoft Basic display adapter. He seems to have stopped the fracas, but less than a week my father told me that he had crashed again.  I tried to restore the laptop to a system image I had done years ago, but I learned that you cannot restore an image to a different version of Windows System. Finally, as a last resort I backed everything up and made a real clean install of Windows 10, and the problem has not yet disappear.

  My goal now is to return the Windows 7 laptop somehow. I can mount a virtual image of the system hard drive and access all the recovery files provided by HP, specifically the Recovery Manager. From there, I can do a recovery USB or DVD (s) we hope to restore the laptop to all conditions of factory (so theoretically return to Windows 7). I will try this, but I need a flash player more than 20 GB or several blank DVDs I don't currently. In addition, Recovery Manager says that this medium can never be created once, so it save me time and money (not to mention my last lifeline) if someone could please share their views on the question of whether this method would be successful or not. I know in case it doesn't work, there is always the question of registration of the OS by Microsoft, but I can cross that bridge when I get to it.

  Sorry for the essay I just wrote, but this has been a problem for too long, and I am at a loss to know what to do now (apart from the purchase of another computer). If there are any questions I'll be happy to answer, and I hope we can get this issue is resolved. See you soon.

  

  If you follow this step 3.

  http://www.SevenForums.com/tutorials/675-system-image-recovery.html

  You will need to select "format and repartition disks" as windows 10 will have changed partitions.

• Screen keeps going black on Satellite C series

  This is my second toshiba, first of all it has been with me for years.
  I have a new a satellite now c series but every now and again the screen goes all black.
  I found the only way to recover from this is to turn off and wait 60 seconds before returning.

  I can't find anything in common between the situations when this happens.
  I googled the problem and there seems to be a problem connecting to the screen on some models.
  Is it my problem or is it something else?

  Could you provide some essential information first?
  It would be useful to know what model of laptop and what system you have exactly.

  Have you checked the laptop for external monitor?
  If this isn't it. It would be interesting to know if something would be visible on 2nd screen while the internal screen is black.

• After the windows welcome screen just goes black?

  After that I entered the password for my laptop, it remains on the Welcome screen. After some time (sometimes) it will move past and I just black. The mouse still works and the cursor can move. No page loads later. I use Windows 8 and this happened for some time. Sometimes this will be repeated but other times it works just as usual. Any suggestions? Please help as soon as POSSIBLE.

  Hi Zachary,.

  This may be a problem with your display drivers.

  What is the brand and model of the PC?

  As you face this problem at random and since you are able to start the office, I suggest you follow these methods and check if it helps.
  Method 1:
  Updates driver may be available through Windows Update.

  To check the updates of the driver,

  (a) at the start screen, type Windows Update.

  (b) click and tap settings on the right side of the screen, then select install optional updates in the results on the left.

  (c) when the Windows Update Control Panel opens, click on Check for Updates on the top left corner to receive a new list of updates.

  
  

  
  Method 2:
  If no updated drivers are available through Windows Update, see the website of your video card manufacturer to see if they have updated drivers available.
  Install the driver yourself
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  Let us know if it helps. If the problem persists, we will be happy to help you.