HP Pavilion dv7 1245dx which is the correct cooling fan Pt. #? 488885 001 or 480481-001

Similar Questions

• HP pavilion dv7 1245dx: what is the average of administrative password

  Turned on the computer laptop and says enter the administrative password. The screen is black with the blue box. Then took me to unlock screen password with 50743009 numbers. I tried to enter, but it did not work. I'm stuck please help? !!!

  Try to enter

  45621029

• Pavilion dv7-6b32us - max and the type of RAM I can install it?

  Hello

  For the pavilion dv7-6b32us, which is the type and maximum RAM I can install?

  The manual says it can go up to 16 GB, but I don't see that 8 GB (4 x 2) available for sale in the world.  We do not know also what type I need.

  Thank you...

  Hello

  Please check this:

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/Pavilion+dv7+series/Pavilion+dv7-6b32us-upgrades.html

  You can buy from them or use the information to buy elsewhere

  Kind regards.

• Pavilion DV7-1245DX: Max RAM for laptop

  Hi, I have a Pavilion DV7-1245DX, P/N NB231UA, w / an AMD processor. I would like to know what the MAX RAM I can put in this laptop. Thank you for your help, Chris Santor

  Hello

  The following specifications, max is 8GB:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c01631353

  Kind regards.

• HP pavilion dv7 1245dx

  I have a hp pavilion dv7 1245dx. Recently, during internet browsing, the system closed and restarted in protect mode. I selected the default option (start windows normally). He started and has worked well for several minutes until the monitor when black. All the lights etc are a turned on normally but there are two small white lights (one to the left of the keyboard and a keyboard above on the right that flash constantly a repetitive pattern of four flashes.) I tried the food forced down and waited a while and restarted. The screen is dark with all of the other lights on and the flashing sequence continues of four flashes on keyboard. Any help would be greatly appreciated.

  Hello justawelder:

  Welcome to HP on the Forum. Sorry for your computer. Here are your computers web page this page covers the flashing light codes.  http://support.HP.com/us-en/document/c01732674 please follow the Witch of task you will say what the material is defective or has faild. Continue with this Web site pages follow the links that's all you need for your computer. It is very easy to navigate rattling on blue writing and main themes under the name of computers. Four flashes code is graphics controller is not funtion. Contact HP direct assistance and get an estimated cost for the repair. 1-800-474-6836 Contact page.  http://h10025.www1.HP.com/ewfrf/wc/contacthp?cc=us&DLC=en&lang=en&LC=en&product=3860630 you're welcome frrw.

• Which is the correct Point on the waveform of the Signal?

  Hello

  Please see attached image.

  I have labview software which is to measure the load of a load cell output. According to me, that the reading is accurate, except with the software Labview, we get up to 50 lbs less when we read it with the oscilloscope technician.

  What I see is that the technician measure the amplitude of the signal at the top and when there is little noise reading of the oscilloscope is even higher because the placement of the cursor is higher.

  I see that LabView is more or less because when we place the cursor oscilloscope in the middle of the measurement at the center of the signal signal not top it it reads then the same my labview program. I also have a low bypass filter in labview software.

  Which are the correct measure points waiting for oscilloscope to measure? in the picture as an attachment the white slider is positioned correctly, or is the correct red cursor?

  It's just an example of image zoom to see better.

  Thanks to you all.

  JCollado

  If I understand you correctly the width of the track to noculars represents 50 lbs of difference as? If you think about how works a noculars, then the center of the line displayed is probably the most accurate. The line width is determined by a few things, noise superimposed on the signal being a. So, with a noise filtering in your LabVIEW its 'width of the line"program will be closer / diluent, as it will have removed some of the noise component. Place the cursor in the middle of the path displayed in the noculars is an approximation of this, sort of looking for the point where the noise is "average" out 1/2 top / in-1/2 under the cursor, which is about the signal of 'data '. It is difficult to make measurements of accuracy of a noisy signal with a noculars for this reason, where do you put the trace? If you were to remove the filter program LP you would probably get the equivalent of the "wide trace flag" which would be a series of values that plotted close the underlying signal, but with high and low variations equivalent to the width of the track.

  So after all this verbiage, I would read the trace Center, perform an average of noise 'eyeball '.

• can a pavilion dv7 run on just the power plug

  Cannot run my Pavilion dv7 3173 it without the battery even if the power supply cable light is on. The system starts in about a second, then turns off. My battery needs to be replaced, but FDI like to run the laptop without it.

  Hello:

  The battery is sometimes so dead that the only way to run Notepad is to remove the battery and run from the power of a/c only.

  So, if your question relates to "Is it possible to do", then the answer is Yes.

• Should DV7-1245dx, which fixed (on 3) I try?

  Now I look a 1245dx dv7 with nothing attached to it but the speakers, monitor, keyboard and audio jacks.  The laptop has a blank screen and flashing caps-Numlock.  According to the website, this means that there is a problem with the a/c.  There was the problem with tilt cord for the computer to start but everything seems ok and is not loose.

  So basically I can try to replace the motherboard

  replace the cable

  replacing the battery

  or try to fix the power supply (which seems not broken from what I see)

  I tried all the fixes on the site.  You know everything, just not if it happens all the time and it's just an another dead mother.  If this is the case I could try just to Cook!  I'm also open to other suggestions

  Here's the manual which clearly you need:

  Manual

  See Page 34. It is possible to replace just the Jack separately. No welding.

  Here's the part on eBay for $3:

  http://www.eBay.com/ITM/new-DC-Jack-power-cable-for-HP-Pavilion-dv7-1000-harness-DC301004S00-/310406227757?PT=Laptop_Adapters_Chargers&hash=item4845a7272d

  This may or may not work. The series dv7-1000 AMD versions had some problems of motherboard and it is possible that. If so, I would not cook it but for $70 or so if you can remove the motherboard, there are competent services online stores who can do a good reflow with real equipment of hawking. Baking jobs tend to fail after 30 to 60 days. A good reformatting may last a few years.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Pavilion dv7 won't enter the BIOS. Anyone (Esc, F9, F10, F1, F2 etc.) on the key

  Hello

  I have HP pavilion dv7, which leaves me not in the BIOS to change the boot order.

  I have windows 8 32-bit installed and keep start normally any key (Esc, F9, F10, F1, F2 etc) at the beginning, is pressed or hold... it will not stop the boot and won't let me in the BIOS. All it does if the keys are pressed, it emits beeps but boot then anyway.

  I want to boot from USB and install WIndows 8.1 64bits.

  Help, please.

  Thank you

  This could help you as it solved my problem yesterday. I disabled quick start (or quick start) in the settings menu of your laptop. I have turned on one day, not knowing that it prevents you from all the boot options. I'm at work and do not have access to a large part of the internet, but google "disable fast boot windows 8 ' or 'disable' quickboot. There are quite a few Web pages that walk through it.

  I am now able to access BIOS.

• Pavilion DV7-4069WM missing on the PartSurfer for parts search

  I'm looking into purchasing to a Pavilion DV7-4069WM, and I was looking at the type of RAM it uses. I used to work for HP, so I am very familiar with HP PartSurfer (via http://partsurfer.hp.com ). I have however questions locate this laptop out there to find the related parts. I tried to get two using search and hierarchy, and I found the part number for the machine using the hierarchy but no result when you click it.

  I also tried the parts through http://h20141.www2.hp.com/hpparts/ store, where once more no results don't come to try to search for the product (tried by product name and product number).

  Does anyone know if there is another way to find which parts are used for the machine in question? Thanks in advance.

  There are two ways.

  The easiest way is to do a search of RAM upgrade.

  The results that I trust are companies like OCZ, Crucial, Kingston and other companies high level due to their compatibility guarantee, on which I found this update memory for laptop that you asked.

  Another way is to go to the laptop support portal and use the manual section to fid the Guide to maintenance and service. The guide will provide even a part number of HP for the memory clean module type.

  Best regards
  ERICO

• HP pavilion dv7-6c67nr: best of the dv7-6c67nr bios update

  kindly help me witch costume best updated bios for hp pavilion dv7-6c67nr...

  Hello

  The best is probably the latest version on the link below F.1C - implemented to date of the HP bios are cumulative, so all the fixes and improvements from previous versions must be included in the latest version.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-115758-1 & CC = US & DLC = in & LC = on & os = 4063 & productOid = 5218615 & sw_lang =

  Kind regards

  DP - K

• Pavilion dv7-6135dx screens on the video driver blue igdpmd64.sys after the platform update KB2670838

  Windows Update has delivered platform update KB2670838 Feb. 27.

  After that, any time I open Internet Explorer, I get a blue screen of death which calls igdpmd64.sys, which is part of the video driver.

  I tried to install the latest video driver HP site was for this machine, even though it is dated as a couple of years.  But he says that I don't have the minimum requirements.   !!??

  I tried a restore point before and everything was fine.

  I let go of the front through the platform Windows Update again and the same problem.

  Now today I have no restore point so I can't go back.

  Because now I am simply not using IE, everything else works fine so far.

  Here are my questions...

  1. is this a known problem of someone else?  Is there an article on the best solution anywhere yet?

  2. suggested approaches to solve this?

  3. How can I get the alternative video drivers to try?

  3A. HP Site latest since this laptop says that it does not meet the min requirements!

  3B. should I even try the following more old?

  3 c. pros and cons of try the drivers of Intel or ATI sites instead of on HP site

  4. If after testing things, if I wanted to reinstall my current driver, how 'save', or protect some how now?  (I think THAT it is the original of the 2011 original installation schedule)

  5. How can I do to reinstall the video driver as 'supplied with the machine', for example since the recovery D: partition?

  6. If I end up having to reinstall Windows, how to do that since the recovery partition?

  Hey cfravel,

  All major issues! Sorry to hear that you use in the blue screens, but you did a good job of troubleshooting. I'll answer the questions in the order that you asked them.

  1 and 2.  Here is a link to the Microsoft Forumwhere there was a similar question. It looks like uninstalling and hiding the implementation update will correct the problem. To uninstall an update,

  • Click Start
  • Program 'type '.
  • Click on programs and features
  • Click View Installed Updates (left)
  • Search for KB2670838.
  • Select this option and click on uninstall.

  To hide the update,

  • Click Start
  • Type "update".
  • Click on Windows Update
  • Click Find updates
  • Click "# important updates available"
  • Search for KB2670838
  • Right-click on it and click on hide (you can always restore hidden updates in the future if you want by clicking on "restore hidden updates" from the main screen of Windows Update.

  3. here is the correct driver for your laptop HP Special Page. I think you're probably already doing it correctly, but just in case. How many times have you tried this driver? Try a couple of times.

  3B. Yes you could certainly try the next previous driver.

  3 c. the drivers coming from Intel or ATI are almost the same driver in most cases. We invite you to try them because they can always be uninstalled. Just, they are not guaranteed to work properly for your specific model.

  4. There are two versions of the driver for your ATI video chip. These and all future versions will still be available on your driver page. Click on the link under the latest driver that says "available versions" for a complete list of all the versions that are never released.

  5. to reinstall the driver of origin or any other original software that is preinstalled on your laptop, you can use HP Recovery Manager.

  • Click Start
  • Type "HP recovery".
  • Click HP Recovery Manager
  • Click re - install the drivers and software.
  • Scroll through the list and select drivers or software to install. These drivers will still be available on your page of driver as well.

  6 here is a link on how to reinstall Windows from the recovery partition. In the links in blue at the top, click on "Recovering from the start (in the system startup) screen". This is a very simple process.

  Please let me know if you have any questions or if these suggestions helped (it could help others with similar issues). I'll keep an eye out for your answer!

• Pavilion dv7-6179us: cannot download the drivers!

  Hello.

  I have a DV7 6179us and never had any problems until about a month or two when it became super slow (it's almost impossible to even type). So yesterday, I formatted and did a clean install of Windows 7-64 bit. I tried to download the drivers from the HP support site, but the page won't display them. He just keep loading indefinitely.

  I was able to get most of the drivers from a third party site (that has the link to the HP ftp) but my computer is still super slow. I don't know if I'm missing a driver or something is damaged. I wanted to get the drivers from the HP support site to ensure...

  Someone at - it a glimpse of what I could do? Thank you

  Hello

  The link in the Spanish works

  http://support.HP.com/MX-ES/product/HP-Pavilion-dv7-entertainment-notebook-PC-series/5082216/model/5171133/drivers

  Drivers:

  Chipset

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55095.exe

  Intel HD video

  http://ftp.HP.com/pub/SoftPaq/sp52001-52500/sp52473.exe

  AMD HD graphics card

  http://ftp.HP.com/pub/SoftPaq/sp53001-53500/sp53025.exe

  LAN (Realtek)

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52503.exe

  Intel PRO/Wireless

  http://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54900.exe

  Bluetooth Intel

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55138.exe

  Card reader

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52502.exe

  Audio

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55094.exe

  Management engine interface (MEI)

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55100.exe

  USB 3.0 Renesas Electronics

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55102.exe

  HP ProtectSmart

  http://ftp.HP.com/pub/SoftPaq/sp53001-53500/sp53462.exe

  HP Quick Launch

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55150.exe

  Synaptics PS/2 Port TouchPad

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55107.exe

  HP SimplePass Identity Protection 2011

  http://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54680.exe

• HP Pavilion dv7 - 6143cl: cannot download the drivers on the hp support site

  I have recently reinstalled windows 7 to fix a problem with some corrupted windows files. Now, I need to reinstall my drivers but to do what I need to download and I can just download them from the site of HP support with product dection or the manutal method I get a logo of loading and it just sits there. I think it's just for my computer because I tried computers randomly and I could see drivers to download (I didn't actually download them I just wanted to see if the problem was on my end or hps.) I tried google chrome, Internet explorer 8 (always install updates windows) and firefox.

  Hello

  The link in the Spanish works.

  Laptop HP Pavilion dv7 - 6143 software cl entretenimiento y controllers | Soporte HP®
  http://support.HP.com/es-ES/product/HP-Pavilion-dv7-6100-entertainment-notebook-PC-series/5082216/model/5118976/drivers

  Drivers:

  Chipset

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55095.exe

  Intel HD video

  http://ftp.HP.com/pub/SoftPaq/sp52001-52500/sp52473.exe

  AMD HD graphics card

  http://ftp.HP.com/pub/SoftPaq/sp53001-53500/sp53025.exe

  LAN (Realtek)

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52503.exe

  Intel PRO/Wireless

  http://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54841.exe

  Bluetooth Intel

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55138.exe

  Card reader

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52502.exe

  Audio

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55094.exe

  Management engine interface (MEI)

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55100.exe

  USB 3.0 Renesas Electronics

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55102.exe

  HP ProtectSmart

  http://ftp.HP.com/pub/SoftPaq/sp53001-53500/sp53462.exe

  HP Quick Launch

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55150.exe

  Synaptics PS/2 Port TouchPad

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55107.exe

  HP SimplePass Identity Protection 2011

  http://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54680.exe

• HP pavilion dv7 starts, which has failed to start test. ID: RK47G1-6AH6LK-9C5V7A-60TP03

  I have the computer hp laptop pavilion dv7 4150er, running on windows 7 64 bit. There no short DST when I ran boot and run in trials with the same ID RK47G1-6AH6LK-9C5V7A-60TP03 with "hard disk 1" in the description. Any ideas what's past? See you soon...

  Hello

  Please check the following:

  http://www.WikiHow.com/recover-a-dead-hard-disk

  Good luck.