HP Pavilion e9180t

Similar Questions

• Graphics card for my HP Pavilion e9180t...

  Hi all.  I'm looking to pass on the graphics card ATI Radeon HD 4850 with my computer.  Wondering if there are restrictions on what the card is compatible with my HP Pavilion e9180t.

  IM on Windows 7 Home premium 64 - bit os.  1 TB HD 9 GB of ram... Intel Core i7 [email protected].

  I read somewhere about the possible conflicts of BIOS or something, not really sure what all that is on... So any help is greatly appreciated... Thank you

  ShadakRokk wrote:

  According to the specifications listed on this site for the e9180t it says 'power output power = 460 watt'... is this the power of the PSU?

  Yes, that's correct.  Therefore, the video card should run fine with your current diet.

• Pavilion e9180t Elijah: windows 10

  After the upgrade to WINDOWS 10, my DVD and BlueRay disappeared! It is not in the device, my computer Manager, anywhere. He appears again in the BIOS - HP BD - RE BH2. Someone at - experienced this kind of problem? I think of inversion to WINDOWS 7.

  Hello:

  Normally proceed with the resolution step 5 from the link below, the problem will be solved.

  https://support.Microsoft.com/en-us/KB/314060

• HP-Pavilion, AV321AV - ABA e9180: boot OS from a PCIE drive

  I want to install a Samsung 850 Pro 1 TB SSD 2.5 inch SATA III disc in computer science and I'd like to keep existing readers for storage so I would like to mount the SSD drive on a map of SEDNA PCI Express (PCIe) of SSD SATA III (6 G). I need to know if my computer motherboard and bios support the startup of the operating system from the disk installed PCIE.

  Thank you for your help

  HP-Pavilion e9180t desktop computer

  Tip: PEGATRON CORPORATION TRUCKEE 1.04E01

  The bus clock: 133 megahertz

  BIOS: American Megatrends Inc. 5.28 09/04/2010

  3.07 GHz Intel Core i7 950 processor

  Usable 24568 megabytes installed memory

  Hello @ThePapa,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I stumbled upon your post on the SSD question and wanted to help!  I understand that you are looking to find if you can boot from the SSD and use other drives as storage device.

  Based on the Product Specifications of the desktop computer, hard drives must be installed using one of the following options:

  • 2 x 500 GB drives in RAID 1 (500 GB of useful storage capacity), 7200 rpm, SATA 3 G (3.0 Gb/s)

  • 1 TB (2 x 500) 7200 RPM RAID 0 SATA 3 G (3.0 Gb/s)

  • 300 GB 10K rpm SATA 3 G (3.0 Gb/s) (primary drive); 640 GB 7200 RPM SATA 3 G (3.0 Gb/s) (secondary drive)

  • 640 GB 7200 RPM SATA 3G (3.0 Gb/s)

  • 750 GB 7200 RPM SATA 3G (3.0 Gb/s)

  • 1 TB 7200 RPM SATA 3 G (3.0 Gb/s)

  • 1.5 to 7200 RPM SATA 3 G (3.0 Gb/s)

  • 2 TB 7200 RPM (2 x 1 TB) SATA 3 G (3.0 Gb/s)

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• HP Pavilion Elite e9180t CTO D: Will Graphics card work with my desktop computer

  I have a HP Pavilion Elite e9180t CTO Desktop PC - AV321AV-ABA e9180t

  Windows 7 Ultimate 64-bit Service Pack 1

  Intel Core i7 CPU 975 3.33 GHz

  ATI Radeon HD 4850

  Motherboard: TRUCKEE 1.04

  System BIOS: 5.29

  To activate the ray-tracing on the GPU, Adobe After Effects requires a graphics NVIDIA and CUDA 5.0 or later approved.

  An NVIDIA representative recommended a GEFORCE GTX 780.  The PNY Graphics Card VCGGTX7803XPB video will work with my desk?

  Hi there @LeoOfMars
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff. I understand that you are looking to find out if a video card is compatible with your information system. I'm happy to help you with that.

  The main reasons to be sure of are normally feeding you, special (to THE) cable power supply for the graphics card, on the motherboard compatible expansion slot, the drivers for your operating system, another thing to know is the physical size of the map, for moments of cases.

  Looking at the specs of your system and the motherboard by default, I listed the type of slot of power and expansion.

  HP Pavilion Elite e9180t Desktop PC product specifications and configurable Options

  Output power of power: 460 Watt

  HP and Compaq desktop PC - specifications of the motherboard, IPMTB-TK (Truckee)

  Two graphics PCI Express 2.0 x 16 (for graphics cards)

  Go to the video card you are looking at:

  GTX 780 3072 MB GDDR5 PCI-E 3.0 OC Custom cooled graphics card

  Input power: 1 x 8-pin auxiliary input aux input 1 x 6-pin
  Bus type: PCI-Express 3.0 16 x
  
  System requirements:
  Mother compatible PCI Express with a slot of chart double-width x 16
  Power 600W minimum (with a minimum of 12V current rating of 42A) 3
  300 MB of available disk space
  2 GB of memory system (4 GB or more recommended)
  Microsoft Windows 8, Windows 7, Windows Vista, or Windows XP Operating System (32 or 64-bit)
  DVD-ROM drive or Internet connection for installation
  DVI, HDMI, DisplayPort or VGA compatible monitor

  So on a quick inspection of both devices there are three problems, so this card will not work on your motherboard or with the current power.

  I hope this helps.

  1 x 8 pins, entry to aux in, 1 x 6-pin

• HP Pavilion Elite e9180t - replacement motherboard

  So some time, HP has done a service to replace motherboards on defective Elite systems.  There was even a Web site configuration to help with it (www.hpelitedesktopsettlement.com).

  Unfortunately, the site is no longer active and all links to HP's internal documentation are not valid as well.

  One of my clients has long lived with the random blue screens, and we're finally going through the review process it.

  Who should I contact to get this replaced motherboard?

  Please see the information available on the HP Pavilion Elite Desktop Class Action Lawsuit settlement on the LWSEP for the HP Pavilion Elite e9150t, e9180f, e9180t, m9600t, m9650f, e9280f, e9280t and computers e9290f. "If the court approves the proposed settlement, HP will post on its website a notice on repair program with instructions on how to make eligible arrangements to receive a repair. You will have 90 days after this notice was posted to contact HP for repair repair. "It seems that HP has posted the LWSEP notice on or around 12/01/2011 and that's why you got until about 01/03/2012 to take advantage of the LWSEP.

  Previously, I suggested that people "contact HP customer support directly and see if they will replace the Commission under this program has expired." Please post back with your results. If you are not successful, I can try to contact HP on your part.

• HP Pavilion 27xi Pavilion 9180: Pavilion watch 27xi

  I bought 4 of these 27xi of Pavilion for two workstations at Costco and think that I must return.  I am now faced with a problem with one where after commissioning there is a 4 "x 4" box where the monitor is just blacked out. When I restart sometimes it will go away. It may take several reboots to do. I turned as just the screen works a few times and then it will go away. All of these are purchased at the same time so I think thet all will begin to die on me like that?

  I've read through the forums and someone posted that HP does not support really win 10 with drivers.

  I also had this problem with the monitor with win 7 pro until I recently updated for free, hoping the 10 victory would solve the problem. If it was the operating system, then all four of these monitors would be to have questions.

  I also did a factory reset and that did not help.

  After migrating to win 10, now all the task bar icons appear on both monitors for each workstation, which is the best.  I checked and have the updated drivers for monitors. When I searched the HP site for the resolutions he comes, says to restart your machine but nothing beyond that did not.

  The funniest part of this is when the computer starts and restarts, it will show the screen turned on properly, and then only then by default is the blackened area. It's as if she is capable, but something makes it just by default with blackened area. Then after a few off and ons the blackened area will disappear. It's like he needs to warm up or something.  I spent a lot of money on these monitors and assumed that they would last longer than about 2 years.

  There is no option to select the monitors for any product here and no issue that works for this. Please move this to the best location when it exists. Not obvious from there where it would be.

  I would like to upload a photo of him, but I don't see a way to do it here.

  Hi @Trillium,
  
  Please become a member of the HP's Support Forums. I understand that you have a problem with the monitor showing a black square. I'll be happy to help you.

  Please see the documents to HP Flat Panel monitors LCD - Monitor is empty.

  With the monitors, there is very little for troubleshooting. Make sure of course connected to the cycle wall and power. Check that the cables are connected correctly.

  Regarding the computer, if it is the HP Pavilion Elite e9180t desktop PC, all drivers for Windows 10 comes from Microsoft or the manufacturing of components. for example Radeon or GeForce video card.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• iTunes does not recognize my iPhone on my HP Pavilion Windows 10 5s, so cannot sync the phone, which has the latest operating system running

  iTunes does not recognize my iPhone on my HP Pavilion Windows 10 5s, so cannot sync the phone running. I downloaded the latest OS for the phone and the latest version of iTunes on my PC and have tried all USB ports several times. I also reinstalled drivers USB to the PC.  The phone is recognized on the computer of a friend under Win 7. All shows when I plug it on mine is a page showing the 'Apple iPhone' folder display of storage internal (2.18 GB free of 14.7 GB). Troubleshooting in devices and printers, where the phone displays as "Not specified Apple iPhone" generates a message saying that "Apple iPhone is an older USB device and may not work with USB 3.0 and plug it into a USB 2.0 port." But when I use USB 2.0 (I tried several times using each of the three USB ports on my PC), troubleshooting the error message says "Apple iPhone won't work correctly with USB 3.0." This seems to be a recent problem, since in March 2016, I could spend a few songs from my PC to my phone using iTunes.

  I wish I had some ideas of people who have experienced this problem, I find to be a more frustrating one.

  Well, you aren't the only one. This just freakin happened to me. I spent the last three hours with apple and Windows supports. Now I'm reinstalling Windows 10 by last resort of Windows support councils. I got the same message USB. In iTunes, under devices something removed my 5s and the iPad. But it remains 6 s wife. I tried my computers 2-(SS) 3.0 ports and 1 port 2.0 ordinary. I tried all four thinners cables I have. I will let you know the result of the Windows reinstall.

• Pavilion dv7 6163 cl: unlock (reset) password on BIOS/CMOS for HP DV7 - 6163cl

  The bios of my notebook (Pavilion dv7 6163 cl) blocked by password, and I never put a password. Could you help me solve?

  Enter the wrong password 3 times or simply leave them blank and press success enter 3 times. You should get a stop code. This zip code here.

  https://BIOS-PW.org/

• Pavilion 15: Bios password

  I have a Pavilion 15-e022sa which I just can't get into the bios as it says I need a password that I never put someone could please help

  Hello

  Enter 60081217

  Kind regards

  DP - K

• HP Pavilion dv7: unable to connect to the Internet

  I can't access the Internet via ethernet or wireless. It seemed to happen after an update of Windows 10.

  Other computer and android phone can access the wireless. When I click on the wireless icon, I see different networks, including mine. However, it is said, "No Internet, secure." I ran a diagnosis, saying that the wireless network adapter and the wired network adapter does not work. I tried to update the drivers, but to no avail.

  I remove this update. I have HP Pavilion dv7, produces none. QJ799AV #ABA. It seems that there are no drivers for Windows 10.

  Here in an Exchange I had with HP Support on Facebook:

  Resolv_S wrote:
  

  Hi@ekdman,

  Thanks for stopping by the HP's Support Forums. Best platform for all kinds of solutions, tips and settings for your questions/problems.

  For the best experience on HP forum, see our Guide to HP Forums to learn more.

  Help with the purchase of a recovery media. Is this fair?

  Thanks for sharing the question. I want to help you.

  I understand the disadvantages that you went through to find the solution for the issue.

  I would like to share a link to order you a recovery HP online support. Please use the link below to order the media.

  http://HP.care/2dMsChn

  I hope this helps. Please update the State of the question,

  Happy announcement.

  Resolv_S

  Happy to help you. I work for HP
  
  Please click on " ""Accept as Solution " " " if you feel my post solved your problem, it will help others find the solution.
  Click on the " Bravo Thumbs Up" " " to say 'Thank you' to help! "

  Thanks for the reply.  However, I took the chance to do a reset on my computer.  And now I have access to the internet.

• Pavilion dv8: problem with Pavilion dv8 (treble/bass control) Windows 10

  I had my Pavilion dv8 for awhile.  I started having problems with the slider treble/bass control. He would sporadically pop-up and begin to change the treble or bass at irregular intervals. He also unplug randomly my wireless connection. I tried to solve the problem by downloading a driver, but the problem remains. At first, it was just a little annoying, fixed by clicking the mouse or pressing the upper button of the internet, but now it of REALLY boring, popping up even as I write this post. But there is no driver for Windows 10. Someone at - it solutions?

  Thank you for your help

  Merah

  Hi @Merah

  Welcome to the HP Forums.

  I would like to take a moment and thank you for the use of this forum, it is a great place to find answers.
  
  If I understand correctly you are facing problem control treble/bass in your laptop.

  I would like to know the number of full model of your laptop so that I can better help you with this problem.

  Thank you.

• HP Pavilion - 15-ab045sa: a few gestures of precision Touchpad not working not

  Hello

  I'm new to the forum, so I hope I posted in the right place.

  My product: HP Pavilion Notebook - 15-ab045sa (ENERGY STAR)

  I have all the gestures of touchpad usual work (three stroke of finger etc).  However, the recent to THE introduced a new gesture to switch virtual desktops. I was really looking forward to this update, but this gesture does not work! I tried to reinstall the update with erase everything and it still does not work!

  I don't understand why it does not work as I have a touchpad of accuracy and all other gestures of work except this new! Also even if some gestures of work (for example three finger swipe), I don't think that win 10 recognizes the touchpad of precision like under settings of the mouse and Trackpad, what it does not say that I have a touchpad of precision and so does me no options to change what are the gestures, as it should.

  I have the Synaptics TouchPad of SMBus 19.2.11.38 driver (21/07/2016).

  Would really appreciate your help as I was really looking forward to the new gesture switch virtual desktops.

  Thank you.

  Just got an update via windows update Synaptics update to version 19.3.11.37 - it finally allowed me to have the film 4 finger to switch virtual desktops!

• Pavilion 500-336: updated drivers audio HP Pavilion 500-336

  Here's the audio that I have on my computer: IDT 92HD65C

  Looking at the Device Manager, I see that the driver date is 07/11/2013.  Where can I find the updated drivers for this?

  The version of the driver I have right now is 6.10.6496.0

  Is there still a good reason do not update the audio drivers?

  Hello:

  The audio works fine now?

  If so, I would not update the driver.  Many problems with W10 and IDT audio.

  There is an audio driver IDT W10 on your PC support page if the Beats Audio doesn't work properly or not at all.

  6.10.6504.0 Rev.A

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-500-300-desktop-PC-series/6879020/model/7127002

• Pavilion AMD A8-6500: graphic upgrade

  Hi all

  My son has a HP Pavilion AMD A8-6500 with Radeon HD 3.50 ghz graphics card.

  It now wants to update as graphic says not good enough.

  What our options are, what is implementing implement as buying a better graphics card or is it more complicated?

  see you soon

  Jason

  Hi there @Jason1966,

  That the Forums are with you!  I understand that you are looking for advice on upgrading a graphics card.  I'm happy to help you with this.

  Please report the number of complete product from your computer. Check out the following, if you need assistance with this information. HP desktop PC - how can I find my model number, serial number or product?  Once I got that I can give you more in the way of what to look for.

  In general, you should know what types of expansion slots your computer is available. More recent graphics cards will focus you on PCI Express x 16 slots and their willingness to be a version or the generation of these slots.  If the motherboard has only Gen 1.0, and the graphics card is Gen 3.0, then the card would work, but it will run more slowly he would in a slot of Gen 3.0. So you want to look at the capacity of your computer's power supply. A common value is 300 W. Higher end graphics cards will be a requirement of minimum recommended power of 400 W or more, although there are cards with a lower requirement. It is always better to have a power that exceeds the minimum value. Also related to food some graphics cards require extra power of a specific type connections. You must make sure that your diet has these connections available. Then, make sure that the card has drivers for the operating system installed on your computer, and if the card is UEFI, make sure that your system has UEFI.

  If all these parameters are filled between your system and the card, the graphics card should work, but there is never a guarantee, because each computer system is as an individual, once it's in the hands of a user. You may have already installed another device that is in conflict with this card or perhaps a software which does not get her drivers graphics. So long story short, it is not easier to just buy a better card, you need to do some research.

  I hope this helps clarify the issues for you and if you find it helpful and useful, please mark this message as a solution. Bravo would be appreciated as well.