HP Pavilion Elite m9060n 32 Bi: updated my HP m9060m Vista 32-bit to a 64-Bit Machine

Similar Questions

• Is it possible (or useful) to replace the processor in my HP Pavilion Elite m9060n...

  Is it possible (or useful) to replace the processor in my media library of Rikouman Pavilion Elite m9060n PC... There an IPIBL-(Berkeley) motherboard with Intel Chipset G33. Intel Core 2 Quad Logo running up to 2.4 GHz. is there a processor more fast which will be taken in the Socket 775 and improve the operating speed? It is economically interesting if possible? Would be very happy comments from some computer guru, as I'm obviously a novice.

  Morrismomic, welcome to the forum.

  The existing processor is Quad core maximum that you can use.  Your only choice is the Core 2 Duo E6700 or E6850:

  http://support.HP.com/us-en/document/c01197633

  Personally, I'm not sure you'll see an appreciable performance gain with either.  The memory and the video card are major concerns, too.  The system is as strong as its weakest component.

  If your problem is solved, please click "accept as a Solution.

• I have a HP Pavilion Elite m9060n desktop PC and want to have two monitors.

  1. I have a HP Pavilion Elite m9060n desktop PC and I have my monitor connected to my computer using the NVIDIA GeForce 8500 GT DVI - I port chart.  I want to use two monitors and on the back of the computer in dos I/O ports there is a VGA slot but there is a black top, lid that States do not remove.  This means that the port is not available?
  2. I have also a port HDMI as part of The NVIDIA GeForce 8500 GT can I use that and the DVI port on the NVIDIA GeForce 8500 GT to have two monitors?
  3. Can I use a DVI splitter with DVI-d port on the NVIDIA GeForce 8500 GT to have two monitors?

  NVIDIA GeForce 8500 GT

  

  

  1.I have a HP Pavilion Elite m9060n desktop PC and I have my monitor connected to my computer using the NVIDIA GeForce 8500 GT DVI - I port chart.  I want to use two monitors and on the back of the computer in DOS i/o ports, there is a VGA connector, but there is a black top, lid that States do not remove.  This means that the port is not available?

  YES, the white cover means that the port / ports are not available. Most HP consumer computers automatically disable the onboard graphics when a x 16 PCIe graphics card is installed

  2.i have also a port HDMI as part of the NVIDIA GeForce 8500 GT can I use that and the port DVI on NVIDIA GeForce 8500 GT to have two monitors?

  Yes, you can use the HDMI and DVI-channels simultaneously to support two monitors. Here are the specifications of your desktop HP Pavilion Elite m9060n. According to the specifications;

  1 - S - video *.
  2 HDMI
  3 - DVI - I (dual link) *.

  Supports two displays at the same time

  According to observers, you may be able to use your current configuration to drive two displays. You can use two HDMI screens with a HDMI and a DVI-HDMI cable. You can use two monitors DVI - D DVI cable with a DVI-HDMI cable. You can also use a monitor VGA and HDMI or DVI - D and VGA monitor with appropriate adapters and/or cable. Please provide the brand and models of two monitors for most accurate response.

  3. can I use a DVI splitter with port DVI on NVIDIA GeForce 8500 GT to have two monitors?

  N °

• HP Pavilion Elite HPE-270e cannot update the bios

  HP Pavilion Elite HPE-270e desktop PC

  Microsoft Windows 7 (64-bit)

  I have a problem running the sp49903.exe that contains the last update of the bios for my pc. My antivirus is disabled, no other programs are running, I am logged in as administrator and also tried to run as administrator, but that I always meet the same problem. It runs and I click Next and then I agree with the terms of the license agreement and then click Next and then I get an error message: (the contents of this file cannot be unpacked. The executable file that you are trying to run has been damaged. If please get another copy of the file, verify its integrity and try again.)

  My latest version of bios is 5.28 and I'm trying to update to 5.29.

  HP Pavilion Elite HPE - 270e Desktop PC product specifications

  Software downloads & Driver - HP Pavilion Elite HPE-270e desktop PC

  you try to download a new copy of it?

  I did and it worked.

  try to download and try to install on another PC and see if the error is the same. It will not install on another PC, it checks to see what the BIOS is the first. But the error you report no has nothing to do with the BIOS, it tells me the downloaded file is corrupt and since I just tried to download and install and it worked, it tells me the file on the server is good.

  Good luck

  Bill

• Problem installation of update KB2556532 on Windows Vista 32 bit - stops configuration stage 3 of 3

  original title; Problem installation of update KB2556532 on Windows Vista 32 bit

  I had problems for the last two months trying to install the update to windows KB2556532. I have Windows Vista 32 bit.

  I had a virus that has been cleaned of my laptop. It was windows recovery of fraud, and I don't know if this could have caused the problem at first, but after you have cleaned the virus always impossible to install this update.

  She always says that it has installed ok, but then when the computer has restarted, it is located in 'Configuring Updates step 3 of 3..' he said then that the update was not installed correctly and is back from changes.  Once the computer has booted I am prompted to install the update again.  It continues in this loop.

  Can anyone help me please with this.  I can't online solutions for this problem, I looked for a few weeks to try and fix myself.

  Unfortunately if this utility installs not it is not that there is something corrupt or prevent Windows to install correctly.

  At this point you can try to contact Microsoft through these channels: https://support.microsoft.com/oas/default.aspx?gprid=11732&st=1 to see if they can provide assistance.

• HP Pavilion Elite m9060n or m9060la Desktop PC Bios and Firmware update

  This computer came with Windows Vista pre-installed

  Now I'm running Windows 7,
  What I downgrade to Vista to update the Bios and the Firmware of my hardware?

  Or the drivers Bios and Firmware Update (.exe files) are fully compatible with Windows 7?

  What suggest you the update in Windows Vista or Windows 7?

  NVIDIA GeForce 8500 GT video BIOS update
  IPIBL - LA motherboard BIOS update
  HL-DT-ST GGW - H10N BD Writer / update the Firmware of the HD DVD-ROM drive

  SAY THANK YOU WITH CONGRATULATIONS

  Macias
  -Please do not use TinyURL my firewall blocks them.
  Click on the star of CONGRATULATIONS on the left, if I helped you. Please mark as RESOLVED, if your question has been answered.

  Hello

  starwarsmex wrote:

  You are right!!!  If it is not broke, don't fix it! But to be honest, I did not play any Blue Ray DVD on my computer, so if a problem exists with the current firmware of the device I need to do? or just curiosity, I'm sorry I lose you, update/upgrade uses the drivers to recommend running the operating system preinstalled in this case Windows Vista?

  If problems exist, then try to upgrade with the appropriate firmware listed in the driver version Vista.

  Some of the improvements will work and others cannot.  It is unfortunate but it is like that between Vista and Windows 7.

  But... If everything works well, change the drivers and/or firmware and invite trouble.

  Best regards

  ERICO

• Pavilion elite e9300z Office video update for the game card

  What is the video card game max nice that I could put in this system?  I want to be able to play games such as SkyRim without him jumping around.  Upgrading the video card even going to help?

  Operating system: Windows 7 Home Premium 64-bit

  Processor: AMD Athlon (TM) II X 4 820 processor (4 CPUs), ~2.8GHz

  Memory: 6 GB

  Current map: Radeon HD4650

  Output power: 350 Watt

  Out of the box Plug here:

  Yes, a new video card erases a large number, if not all of your games graphics problems. The problem is that you will need to replace your power supply by a more powerful to support a class game graphics card. The Corsair CX500 and CX600 are excellent choices because they are favorite forum and known to adapt to many cases of HP without problem. Please see Guide of Big_Dave for the selection of a discrete video card for information about the choice of a graphics card.

• "Configuring updates: stage 3 of 3-0% complete.". Do not turn off your computer. "Todays automatically. Update on a Vista 64-bit machine

  The message "configuration updates: stage 3 of 3-0% complete.".  Do not turn off your computer. ' is on my screen for more than 2 hours.  OS 64 bit Vista with automatic updates on the value.  What should I do?

  Hello

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista/Windows 7 with the Windows installation media and use the repair feature

  How to do a startup repair in Vista and Windows 7
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the system - Vista Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  This tells you how to access the system - Windows 7 Recovery Options
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to do a system restore in Vista and Windows 7
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a disk of Vista or Windows 7.

  Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
  x 64 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Cannot use Windows Update to upgrade to Vista SP2 Bits does not appear

  Windows Update error 80246008

  It is said to start the BITS in the Services Application. BITS does not appear here. I ran

  FixIt tool for Windows Update?

  http://support.Microsoft.com/default.aspx/KB/971058
  It does not find anything wrong

  I ran sfc/scannow and that's what its says Windows Resource Protection found corrupt files but was unable to correct

  The details are in the CBS. Which I do not have access to.

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/f886dbcf-2c5b-4AF6-ae5b-71ac8da9d90b
  answer is in the link
  Thank you

• Windows Update KB311472 for windows Vista 32-bit Home

  I tried everything to install. This update for office 2007. It is an update of February 9. Still, I got the error KB 8070005.

  I am logged in as administrator. I've also read many solutions on the internet, but it still does not work.

  Can someone help me?

  I found the update on a Microsoft site. so I downloaded separately.

  It is now installed on my computer!  This problem is solved.

• After update - black of Windows Vista at startup display 1142/1142 (Registry\Machine\COMPONENTS)

  I had an update before closing my office last night (that is, using Vista).  This morning when I turned on the computer, a black screen came with the appearance of the following text:

  1142/1142 (Registry\Machine\COMPONENTS)

  I couldn't do anything so, I turned off my computer.  Now, the power will not come.  If anyone has any suggestions (could power suddenly gone bad or the power suddenly button failed - just a coincidence, it happened at that moment?).

  A big thank you to all those who wish to enlighten me on this matter.

  Note: This Office was purchased in 2008 - Acer Aspire AM5620-E5523A (I'll never buy Acer again once!)

  Hello

  It seems to be a problem with the hardware. I suggest you to contact Acer support for assistance.

  Support from Acer: http://support.acer.com/us/en/default.aspx

  Hope the information is useful.

• Windows Defender does not update new definitions (Windows Vista 32 bit OS).

  An error 0x80072efe code.  Tried the update through Defender site but get the same problem during the update process: it stops with this error code.

  I have also continued to redirected to Web sites at random.  I ran Spybot, Ad-Aware and Malwarebytes, scans were clean.  I keep getting redirected to a site that says I have registry problems and to perform an audit. Have not yet done.
  Any help would be appreciated.  Thanks in advance.

  "sturgis22" wrote in message News: 08-4125-a7c0-cf64693b7092 5aa67e34-0c...

  Thank you.  I have McAfee and MS Security Essentials.

  Can you tell me how can I get rid of internet redirect me to malicious sites?

   
  If you have both installed and executed they WILL conflict. -uninstall one or the other, or at least turn it off
  Download and install Malwarebytes Anti-Malware - update and run a scan complete delete everything it finds.
  Check your Hosts file and verify that you do not use an unknown proxy server.
  If you need more - you would be better at a site specialized in malware.
  www.bleepingcomputer.com and www.aumha.net are two of the better ones.
   
  HTH
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• My pavilion dv7-1132nr does not illuminate. It operates vista 64-bit

  When I turn on my compiuter, it starts, but the screen does not light.  The flashing next to the caps lock as well as the light above end, PG. Prev flashes.  Help, please!

  Hello

  One way to test if there is a problem with the display board is to connect the laptop to an external display and see if you get video output.

  If you do not need to get the CPU replaced, the best advice I have is to find a local computer repair shop and get an estimate (and to confirm the diagnosis) for the cost of the repairs it.

  Kind regards

  DP - K

• I have a HP Pavilion Elite m9280f PC, I replaced the case for a larger, having connection problems

  I have a HP Pavilion Elite m9280f PC, S # [personal information deleted], Windows Vista 64-Bit. I replaced the case for a larger, having connection problems. Lost manual, downloaded manuals, I can not find a diagram of the wires hanging in the motherboard. Help please Tom

  Tomahawk, welcome to the forum.

  This is the page for Specifications of the motherboard of the computer.  You should be able to enlarge the diagram of the motherboard to locate most of the connections.  The only place you may have a problem is with the power button connector.  Some cases are not compatible with HP moterboards.

  Please let us know if this solved your problem or not.

• Desktop Pavilion Elite e9240f update my current H-RS880-Μatx motherboard

  I've been slowly upgrading this desktop computer.

  I thought it was the safest way for a novice to replace and not to build a new.

  The motherboard is not the integrated graphics card.

  Desktop Pavilion Elite e9240f

  Recent updates
  
  Radeon HD6870

  16 MB OF MEMORY DDR3 1333/1066

  Caviar Black 2 TB SATA III 7200 RPM 64 MB Cache

  Caviar Green 2 to SATA

  Updated HP SuperSpeed USB 3.0 PCIe x 1 card

  Specifications of the motherboard

  FOXCONN ALOE Version 1.01
  North Bridge AMD 785 G revision 00

  South Bridge AMD SB700 revision 00

  CPU AMD Athlon (TM) II X processor 4 945

  Socket AM3 (938)

  5 PCI

  Maximum capacity of memory
  16384 MB
  Slots 4

  Hello

  A new motherboard verses a new PC is an interesting question.  Develops technology in increments of best financially or is it better to just take the plunge?  Advanced technology has always been more expensive for early adopters.

  Just replace the motherboard involves hardware, license the software in some cases and labor costs. How long this choice will extend the useful life of the technology you use? For example, if the new motherboard is leading edge, then you could spread the costs for adding new technologies to your own model of life of technology.  No matter what you do, it sometimes becomes a viscous circle of technology.  Don't you think that manufacturers use the obsolescence in their business model?

  If you were running a business, you may want to consider the initial cost is amortized over an expected useful life the time (36 months?), then add in the trade in value or resale value to cross the real cost of xx months.

  Back to your original question. Depends on components that can be transferred to the new motherboard and how long they will last before having to replace them.  Building a PC can be more expensive, and then buy a new PC, because manufacturers use the "scale of economies" to produce the same PC at a lower cost. If you're a tech enthusiast, then costs don't matter really that much.  You need to replace a "go faster goodie" with another on your calendar and tithe on.