HP Pavilion Elite m9402f PC reformat

Similar Questions

• HP Pavilion Elite m9402f: Information on compatible SSD for the old desktop PC

  PC desktop, HP Pavilion Elite m9402f

  How will I know what Solid State Drives are compatible with my computer?

  A 850 EVO 256 gb SSD Samsung works with my motherboard?

  Thank you!

  Tim

  Hello @TimT1,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I stumbled upon your post on the SSD question and wanted to help!

  Based on Product Specifications of your office, your motherboard supports the hard following:

  • 640 GB SATA 3 G (3.0 Gb/s)

• Replace the motherboard - HP Pavilion Elite m9402f

  HP Pavilion Elite m9402f

  AMD Phenom X 4 9650 Quad Core

  7 GB DDR2

  640 GB HD

  NVidia GeForce 6150 SE

  Vista 64-bit

  I'm looking to replace the mother board is dead. I thought I would check here before you buy it to ask you a few questions.

  1 is - that the correct motherboard?

  2. I have problems with Vista, recognizing the new motherboard?

  3. all other components (CPU, RAM, wireless, card etc) works very well just plugged on the new motherboard?

  4. any tips or tricks for the swap I should or need to know, or that it will be simple enough?

  Thank you

  Installation of a Narra3 motherboard which is not 'tattooed' with your system information will allow the factory OS to comtinue to exploit. The problem occurs when you use your HP recovery disks, the installation will fail. Yes, you can install Windows on a single disc of Windows and it works perfectly. The only problem is that you will not be able to install the HP 'value-added software' device that was originally installed on the computer.

  Please send Bravo

• PAVILION ELITE M9402F: HOW CAN I GET THE COLOR RED ON MY SCREEN?

  A

  Thank you Amy and Sam.  Amy you have me thinking about cables and so far they looked good so I went across the end (the CPU) and everything was fine there too.  So, I started to pass the cables the CPU to different locations where they have been accepted and guess what?  I got real lucky and now I still have nice bright colors.  When I set up the computer in the new place I don't have the cables in the same place.  They worked but very little or now color.  Now, everything is fine thanks for your suggestions.

  ngreenwood

• Adding a 3rd HARD drive to my Pavilion elite m9150f

  I have a Pavilion Elite m9150f with a motherboard Asus IPIBL-LB. I have 6 sata ports, but only 4 are currently used. It has Vista Home Premium 32-bit running 2 HARD sata drive seagate 360 with a partion recovery and 2 CD/DVD players. I would add a Seagate 2 TB sata as main drive (C) both a bigger partion (posibly update of OS in the future) 20 to 25 GB for recovery (D) copied to starting from the origanal and reformat it as a temp for videos, etc. I can do this by moving the SATAS after the cloneing and move the optical drives and see MOBO them without having to make all kinds of changes to the BIOS. Thanks for any advice in doing so.

  Hello

  If you have already two drives hard and two optical drives, then you will have a hard time to find a place inside the PC to secure the third hard disk.

  You could try to use a 5.25 "to 3.5 adapter railsand then fix them and the hard drive down inside the PC. Another option would be to expand the two ports of the vacant motherboard to the I/O back plateand use a drive external eSATA dockthat could accommodate two hard disks that are either 2.5 "or 3.5" or a combination. That would give you great flexibility for the exchange of different hard drives while appearing that they are installed in their own country.

  You should be able to use a hard drive imaging product to the new hard drive the current boot drive. If you use VISTA then I would avoid using a disc hard format model advanced unless you know for sure that the disc produced Imaging align correctly partitions. In any case, if you use VISTA then upgrade to service pack 2 and run this update Intel utility before you install the new hard drive. Utility update driver Intel Intel Driver Update Utility level Bios 5.43is the latest bios for your PC.

  I use Paragon Hard Disk Manager Suite(eval copy) to make the imagery of my hard drive, but there are other products available. Macrium Reflectand Acronis are also good products.

• HP wireless keyboard from 2.4 GHz on the HP Pavilion Elite 083 Volume controls does not not in Windows 8

  I have a HP 2.4 GHz wireless keyboard on a desktop HP Pavilion Elite 083 UK:

  Model KG-08510 rev 1.1

  Product #ABU KZ256AA number

  Part number 505143-031

  .. Since the upgrade to Windows 8 Pro to Windows 7 Home Premium, I have problems with getting control of Volume +, - and disable keys on the keyboard to work reliably in Windows 8 Pro.

  In summary, the symptom is that when I start the PC from a start-up to cold which is a full power down of the State of the volume on the keyboard controls do not work.

  However, if I unplug and re - plug the USB wireless receiver that came the keyboard on the PC then on the keyboard volume controls begin to work again.

  I tried the following things to try to solve this problem:

  -Made a lot of new installation of Windows 8 i.e. reformatting the hard drive (no recovery) and fresh install Windows 8 on a blank hard drive.

  -Installation of Microsoft Windows all the updates available for the machine.

  -Manually install drivers wireless keyboard on the site of HP driver for my computer HP Pavilion Elite 083uk (this allows the screen display on to CapsLock and numlock which works reliably every time that I start).

  -Disable 'fast start up' in Windows 8 power settings

  -Using different USB ports on the back of the machine

  This question is re-producable each time and the keyboard volume buttons work fine even from boot cold when I was running Windows 7.

  I think that I have now found a solution / workaround to solve this case no matter who is interested.

  1. download and install the Microsoft "DevCon" tool that provides an interface to command line for Device Manager.

  Download and installation instructions are here:

  http://social.technet.Microsoft.com/wiki/contents/articles/182.how-to-obtain-the-current-version-of-device-console-utility-DevCon-exe.aspx

  2. create a Windows scheduled task with "highest privileges" that works on logon that issues the following command:

  DevCon restart 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

  This restarts "HID-compliant consumer control device" that is listed in my device manager which is middle for the proper functioning of the volume control and mute buttons on the keyboard (keyboard functionality is via a separate driver which is not affected).

  NB. you need to replace ""HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02"with whatever hardware ID is listed in the device for that Manager.»

  3. If the above does not work, then you must create a scheduled task to run a batch file with the following:

  DevCon disable 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

  DevCon enable 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

• Hp pavilion elite hpe-570f system recovery question

  I'm having all sorts of problems trying to do a reinstall my hp pavilion elite hpe-570f system. I'm trying to use the recovery partition. I can get to options and don't start the process, no problem. He has even reformat the hard drive. The problem arises when relocation of the factory software. Usually, it hangs at 1% until the screen loses the signal and that's it. I have disconnecged everything - including the usb keyboard and mouse on the last attempt - but the most I ever got was 35% before the screen loses the signal and nothing else happens. I thought that if I left him alone, he would install completely, but this last time I left for almost 4 days and still not install. Advice?

  Given that it was me that pisses off the coast, I purchased a retail version of windows 7 unlimited and tried. The same problem. Bought a new motherboard - and the case since the case of HP is designed to put another issue - and he moved very well. Have not had any problems of video card. It seems therefore that the cause of this whole ordeal was the motherboard.

• How to add to my HP Pavilion Elite HPE-590uk Usb 3.0

  Hi does anyone know if I can improve my HP Pavilion Elite HPE-590uk for usb 3.0 and if so could you recommend a product that I could buy to do this.  Thanks in advance.

  One of them check it:

  http://www.overclockers.co.UK/showproduct.php?ProdID=CC-003-AK

  This is to use a pci-e x 1 card. You have 2 these slots available. This will show you how do:

  http://h10032.www1.HP.com/CTG/manual/c02255267.PDF

  See the section on the replacement of a card.

  Instead of plugging on the long black slot which is a video card plug into one of the slots black short. You have Windows 7 I think which means that you will need a driver, but that should come on a CD with the card. Will need you a power connector (molex) on the map, too.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• A usb 3.0 card can be upgraded to the HP Pavilion Elite e9150t CTO desktop computer?

  I have a HP Pavilion Elite e9150t CTO Office, which has been upgraded to Win7 64-bit.  Could I move to the newer and faster usb 3.0 by purchasing and installing a card with usb ports?

  Hello

  Based on the following specifications, it has a few free PCIe connectors:

  http://support.HP.com/us-en/document/c01792852

  You can add a card PCIe USB 3.0 on your computer such as:

  http://www.eBay.com.au/BHP/USB-3-0-PCI-e-card

  Kind regards.

• HP Pavilion Elite HPE-500f desktop PC

  HP Pavilion Elite HPE-500f desktop PC - I would like to upgrade food, video card and hard drive. Can I use a SATA III hard drive? Can I use a 4 Gig ATI video card? Those are the weak links in this computer in the measurement of performance, Windows 5.1 index. The ram has already been updated to 16G. I would use a hard drive WD Black edition.

  Thank you!

  Jon A. Schoen

  [email protected]

  You can use a SATA-III HDD but the 785G chipset only supports SATA-II. You won't see any difference, and the SATA-III is backward compatible. You have a 300W power supply. You can put in a better and with a minimum 500 or 600 watt PSU, you can install any videocard, pcie 16 x which will be in good physical shape. In retail offices, there is simply not as much space as in a custom build Tower and best video cards these days are huge things two locations. Don't forget, it fits with room to spare, or you will have problems of air circulation.

• XP drivers for HP Pavilion Elite m9280.me desktop PC

  Hi, I'm looking drivers XP (downgrade) to HP Pavilion Elite m9280.me desktop PC.

  I can't find them on HP Web site, there is only the lightscribe software.

  Can someone write me a list of the devices (e.g. video: GeForce GT 130) or the site where I can the found? Thank you very much!!! Tangier

  Drivers for Windows XP:

  Intel G33 chipset (first installation and reboot) here

  Intel Matrix Storage Manager here

  Realtek HD Audio here (install it before graphics driver)

  Graphic Nvidia GT 130

  Use modded worm 185.85 Nvidia drivers.

  How to install under XP:

  Basically, it is a 3 step process:
  1. Download driver here, double click and select Extract.
  2. download modded INF here and replace the original INF in extracted folder.
  3 install and reboot.

  LAN Realtek RTL8111C here

  Lite - on Wireless LAN here

  .NET framework 1.1 (Install before HP multimedia keyboard)

  HP multimedia keyboard here

• Pavilion Elite HPE: Power on password

  I powered up the computer after 4 years of non-use and do not know what the power u [password is? I can reset the motherboard some how? Help, please. I can't find a connecting cable

  You are the very welcome.

  In order to clear the BIOS P/W, please refer to the link below, last position on the page...

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-desktop-PC-series/5035344/model/5036175/document/c02668523/

• Pavilion Elite HPE-170f Deskto: Memory Upgrade

  I have the HP Pavilion Elite HPE-170f desktop.

  Motherboard: Pegatron IPMTB-TK (Truckee)

  Processor: Intel Core i7 CPU 920 @ 2.67 GHz, 2668 Mhz, 4 Lossnay, 8 logical processors

  Storage media: 6 x DDR3

  Memory type: Types DIMM PC3-8500 (DDR3-1066)

  I currently have 8 GB of memory.

  What is the maximum I can install?

  Operating system: win 10 Pro 64-bit

  Thank you

  John

  @jmwright1058

  Memory upgrade information

  • Architecture memory triple channel

  • Six DIMM DDR3 240-pin connectors

  • Supports types DIMM PC3-8500 (DDR3-1066)

  • Memory non - ECC, unbuffered

  • Supports DIMM DDR3 4 GB modules

  • Supports up to 24 GB on 64 bit computers

  • Supports up to 4 GB * on 32-bit computers

• How to access the BIOS on a Pavilion Elite e9237c with mouse and keyboard wireless?

  I have a desktop computer Pavilion Elite e9237 with a wireless keyboard and mouse. I tried to access the BIOS by pressing F10 at startup with no luck, and I can't access any of the other menus for the start-up eiither. I don't have a PS/2 port on my computer, so I can't get a wired keyboard and mouse. Does anyone know how to access the BIOS with this configuration?

  I bought a USB keyboard and he answered in the same way... No bios access. I then studied why it did not work and discovered that it was the way in which he has been connected to the computer. I had initially plugged into a USB hub when he was not working and I moved it directly into a USB port and it works! I plugged my keyboard wireless directly into the USB port and it works too! Thanks for your help... I wouldn't have thought of it if it wasn't for to recommend you the USB keyboard.

• HP Pavilion Elite HPE-495uk for: HP Pavilion Elite HPE-495uk

  HP Pavilion Elite HPE-495uk Desktop Hi there I have the computer following and need to update my graphics card and want something with 2 GB what cards will fit in my system and have I not enough power to power a new 2 GB card? Any help would be great. Soon TV

  Hi there @Tele,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have any questions about the upgrade. I'll be happy to help you.

  The Notebooks of PC HP Pavilion Elite HPE-495uk Desktop, this computer has a slot PCI Express 1 x 16 for the graphics card and a 460 W power.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.