HP Pavilion - failure of the update

I'm having the same problem.  HP Pavilion 8 ran windows updates and now every time it starts it goes directly to the screen of failure and never returns.  The laptop is never in the office so none of these suggestions work.  Any other ideas?

Hello

You can see this knowledge base article and follow the steps.

"Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

http://support.Microsoft.com/kb/949358/en-us

Let us know if it helped to solve the problem.

Tags: Windows

Similar Questions

  • Failure of the update of the virus definitions and spyware

    My machine will not update the definitions of viruses and spyware. It maintains error 0 x 80070424 report.

    I get this error reported:

    Failure of the update of the virus definitions and spyware

    Security Essentials might not check for viruses and software spies definition updates following a network connectivity problem or the internet.

    Security Essentials could not install the definition due to updates

    Hi GlennRogers,
     
    Here are a few articles related to this topic. Try the suggestion given in the statutes for this problem:
     
     
     
    Here's a direct link to troubleshooting automated for this question:
  • failure of the update of the software iPad 2

    I'm not able to update my iPad 2 with the new update of the iOS 9.3 software. Tells me that I'm no longer connected to the Internet - which I am clearly! Can someone help me with this?

    Please and thank you :)

    Apple temporarily withdrew the update until it is resolved. You will not be able to update for a few days.

    http://www.MacRumors.com/2016/03/25/Apple-ios93-iPad-2-update-bugs-remain/

  • Equium A60 Notebook failure during the update of the BIOS

    Hello
    My computer crashed during the BIOS update recommended to treat the blue screen error message. I have turned it off completely and now it won't start at all. No lights turn on or it's like there is no power getting to the machine. My outlet does work as I have tested. This could mean my battery is dead? I tried to remove and clean the contacts or the update of the BIOS had something to do with it?

    Thank you
    Phil

    Hi, Phil the A60 sometimes fails started well only very rarely that incidentally that happened to me once. To solve this problem requires the removal and re-sitting of the battery pack. However, in your case, it sounds very likely the BIOS update has failed unfortunately is a return trip to Toshiba.

    Richard S.

  • DRIVER POWER STATE FAILURE during the update of Windows 8 to 8.1

    Hi all, I tried to upgrade from Windows 8 for Windows 8.1 but still get a DRIVER error message, OUT of STATE, and then the installation stops and goes back to Windows 8. As it is a very recent laptop, it should not be a problem of out-of-date drivers. Does anyone know how to fix this? Thank you very much!

    I have a the same problem, but resolved

    just update your driver from nvidia with the nvidia tool.

    Then the update will go.

  • Compaq Presario CQ71-320SA: failure of the update of the BIOS via Support Assistant / should I update anyway?

    This morning I found that my laptop had not finished closing 8 hours ago. I stopped by pressing the button Off for 6 seconds and restarted. I then looked a likely cause and saw that a BIOS problem was probably the cause.

    I'm went to the site of HP support & with information about http://support.hp.com/gb-en/document/c00007682, I followed step 1 and I saw that my BIOS is F.11 21/08/2009.

    Support site told me that I need F.11Rev1/20/10/2014. I installed, rebooted and saw that he had failed.

    What's worse, is that the program Insyde update it says that the 2009 version is updated - see below.

    A kind person could tell me what I should then?

    New Envy 15-AH151sa
    More old Compaq Presario CQ71-320SA screwed up by free upgrade from Microsoft of Win7 for Win10

    Hello

    You can manually update the BIOS for your laptop by downloading from the link below:

    The current version available is F.23

    http://ftp.HP.com/pub/SoftPaq/sp51501-52000/sp51527.exe

    Once the download is complete, double-click the downloaded file and follow the instructions on the screen.

    You will notice may-continuous display blank for a few seconds, which is quite normal. Once the update is actually the device automatically restarts.

    Note to back up your data before performing the update. Also have your adapter connected to the laptop.

    I am an employee of HP, the views expressed here are my personal opinions, not HP.
    Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.
    Click the "Thumbs up" button to the left side of my post to say thank you! ***

  • ERROR CODE 606 CAUSING FAILURE OF THE UPDATES OF WINDOWS 'IMPORTANT' 10

    Help, please!  I try to install the last "10 important updates" for Windows, which I was informed automatically.  I tried 4 times in 2 days now and each of them settled due to the 'error Code 606'.  When I click on "help", he pulls up "WindowsUpdate_00000646" "WindowsUpdate_dt000" If that's any help.  Each time, it goes through all the motions, past by restarting as usual, then I get the same reminder of updates, showing "failed" on all of them.  I have not had this problem before.  I don't know what to do to get these updates installed.  I NEED HELP ASAP!  I am a user of impressive program but not at all a geek who can solve the problems that arise, and I have no one to turn to in my personal circle.

    First of all try to install updates when you're disconnected from the internet.

    If no joy, then try to manually download the same and install.
    You can search the individual updates here:
    http://www.Microsoft.com/downloads/en/default.aspx

    He just put in the KB number and then perform a search.

    If this still creates one problem another thing you can try is disable the User Account Control first download before the update manually. See: (Guided Help: settings to adjust user account control in Windows 7):
    http://support.microsoft.com/kb/975787/en-us.

    How to use User Account Control (UAC) in Windows Vista
    http://support.Microsoft.com/kb/922708

    TaurArian [MVP] 2005-2010 - Update Services

  • failure of the updates of windows

    Until recently Windows updates are made automatically, yesterday, I open the updates by accident and received this message ' Check for updates ' when I do I get an error 80072EFE code, can someone help me please, the updates have been downloaded successfully for some time now, so far, I hope someone can help me best regards j62

    I use vista basic with service pack 2, and yes they came out OK I [none] idea why they stopped...

    You may encounter temporary connection [e.g. 0x80072EFE] errors when you use Windows Update or Microsoft Update to install updates
    http://support.Microsoft.com/kb/836941

    How to reset the Windows Update components?
    [Run the difficulty in default and aggressive mode]
    http://support.Microsoft.com/kb/971058

    The foregoing despite...

    When (date about) don't you install Microsoft Security Essentials (MSE) and has been the computer fully-patched to Windows Update in time?

    What antivirus application was installed before you installed MSE, was your subscription always news, and did you uninstall it before installing MSE?

    A (another) Norton or McAfee application ever been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Power failure during the update of firmware for Color LaserJet 2600n

    Just in the middle of the update the firmware for my Color LaserJet 2600n, the power is out. Now I can't get anything to happen on the printer. The screen, or the power lights and the error light, but it does not work when the power is put on. I think that he wiped the previous firmware and either had not started or has been along the way in writing the new info. Is it possible that I can cancel it and reload the original firmware? It hangs on my MacBook Pro running OS 10.6.8. The only thing that the instructions seriously cautioned against a interrupt the installation. Needless to say, this is exactly what happened when the power is out. Any help would be greatly appreciated.

    Randy

    Able to understand me. Has proved to be quite simple. Powered off the printer and turn it back on and represented the firmware upgrade program. The printer didn't restart automatically, so I had to power off and wait 5 seconds before feeding this back. Once he recalibrated itself (which takes several minutes), I was in business.

  • EqualLogic PS6110 failure of the update of the firmware

    Hello

    I EqualLogic ps6110 and I tried to update the firmware of V6.0.6 (R367622) (H2) to V7-0-5-(R390599) and after he says he needs a reboot, I try to restart it says: unable to update Firmware please check event log, I tried to upgrade to V6.0.10 in case I can't jump to the last of my note the machine is broken and can not connect to him more, I should reconfigure? Perhaps default settings?

    PS: his machine newly installed, so I don't have any data on it, wiping so restore factory default won't hurt.

    Best regards

    Ahmed Seoudy.

    Hello

    There are two kits of FW in the 7.x base code.  32 and 64-bit.   The 6110 requires 64-bit kit.   Reset is not necessary.   If you have the correct kit, then please open a pension case.   They can look at the logs and help you to get the updated firmware update.

    Kind regards

  • Impossible (to install office 2003 after repeated failures of the updates for office 2003 re security)

    The security update for office 2003 on my XP (SP3) kept failing throughout the last week. I contacted the support of MS PC security by phone and I was transferred from the Department the installation program office at Department of update of security for customer service. And none of them had no idea of what is the problem. I lost patience with MS is supported. I followed some other technique posted on the web for the same question and tried to uninstall office 2003 and re - install. However my new installation of office 2003 meets the following error (same error I got when I tried to apply the security updates)

    "Error 2932: an internal error has occurred."
    (C:\WINDOWS\Installer\{91E30409-6000-11D3-8CFE-0150048383C9)\graph.ico 131)
    Contact the Services de Support technique Microsoft (PSS) for assistance. »

    After the Installer rolls back all the facilities. Now I find myself with no office 2003 (I tried office 2007 install with the same result).

    I would really appreciate it if other users can help you with a fix for this or MS support engineer.

    My desktop is hp pavilion PC under XP (SP3).

    Finally, I was able to get good support from Microsoft. A Microsoft support engineer remotely connected to my machine and was able to fix the installation/update directories corrupted microsoft who were at the origin of the problem. I managed to install office with success and things are back to normal. I had given up hope after my original support request (2 weeks back) and the first experience with the customer. But MS technical support engineers (the less one that helped me yesterday) seem to have a good idea of what was going on and was able to solve my problem quickly. Thank you MS support

  • error 1001 - failure of the update

    This is the second time I met problems with CC does not update correctly.  The last time I had to uninstall all my apps uninstall creative cloud and then get a new computer to work to reinstall.  Now, I get the "Office cloud creative to update failure (error code: 1001).»  I can't uninstall because my applications require CC.

    I am slot that Windows 7 Enterprise SP1 64-bit

    Help, please

    Renounced Creative Cloud Desktop App has managed to successfully install manual updates for all Adobe CC 2015 updates applications: Direct Download links for Windows | ProDesignTools

  • Want 750-103D: failure of the update of the BIOS wanted 750-103d

    HP Support Assistant indicates my office has 2 BIOS update (SSID family ROM version A0.14Ap1 2B4B & SSID 8284 version F.04Ap1). My current BIOS is version a0.11 as of February 24, 2016.

    Issues related to the:
    (1) why my CRAVING for office 750-103D has family ROM 2 SSID?
    (2) my attempt to update the BIOS with HP Support Assistant failed twice, is there another method to update?
    (3) how can I download & save the driver and then update through the management of the BIOS?

    Thank you!

    Hi, how are you doing?

    The correct bios is:

    http://ftp.HP.com/pub/SoftPaq/sp76501-77000/sp76767.exe

    I hope that helps!

    I would give a great kindness...

    If the question is clarified, mark my answer as "solved" and click the icon of the 'hand' to provide 'Congratulations' in recognition.

    Have a great week!

  • Failure of the update from Microsoft

    I have Win - XP Prof. with Service Pack 3 installed.

    In Microsoft Update, after download, the installation of "Office 2003 update for Microsoft Office Outlook 2003 Junk e-mail filter (KB2466074)" fails with error Code: 0x51F. What could be the reason?

    There are 5 other updates that fail to install.

    Hello

    I suggest you follow the steps mentioned in the articles below.

    You receive an "Installation error: file not found" or "Error 0x51F" error message when you try to update Office 2003 programs from the Office Update Web site or the Office Download Center

    http://support.Microsoft.com/kb/875556

    How to troubleshoot incidents to update your installation of Office on the Office Update Web site

    http://support.Microsoft.com/kb/304498

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • failure of the update since 12/11/09

    The agent failed Windows update 7.4.7600.226 - update for windows vista (KB968389) - platform for windows visa updates (KB971644)

    I recently added Norton 360.  Already had norton, AVG, then until the recent purchase of Norton 360.

    The Norton applications are known to not upgrade or uninstall itself.

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. After completing some you have a copy of your handy product key, uninstall Norton 360 ( LiveUpdate and all Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

    4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

    NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

    5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

    6. do a clean install of Norton 360 using your product ID & reboot: http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

    TIP: Do not activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

    7. manually and repeatedly run LiveUpdate until you get a prompt "no update more".

    8 test cycle.

    ===========

    TIP-online right click on desktop and select properties: Vista your version will be displayed on the general tab that results.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Maybe you are looking for