HP Pavilion G6 (2102AU) - does not light

Hello. I have 2 laptops HP, the two Pavilion G6. One running Windows 7 64 bit of Windows 8.

I'm currently overseas with my wife - his is the race a Win-7 and we went just for shopping. The G6 was charging. We came back and now it turn on at all. It was purchased new in October 2012.

Of course, I googled the question as soon as possible and as a result, saw this forum and read some questions support here holding down the power button for 30 seconds and then plug in but none of this does not work. Someone also mentioned a button you press with a paper clip, but I don't see anything to that effect on this Pavilion G6 model.

I tried battery switch, but nothing seems to wake up this thing. There is no light to come on the side of the machine either.

If there is a way that this can be resolved, any help would be appreciated. Otherwise, I expect return this for a full refund (less than one year) and would have serious hesitations regarding the purchase of another HP gave this issue.

Thank you

Sorry to hear about this issue. The laptop has a 1 year warranty. I would contact HP:

http://h10025.www1.HP.com/ewfrf/WC/contacthp?CC=US&DLC=en&LC=en&os=4063&Product=5283095&sw_lang=

Tags: Notebooks

Similar Questions

  • my mac book does not light and I get three beeps while it tries to start

    my mac book does not light and I get three beeps while it tries to start

    Three beeps is almost always a problem of memory RAM.

  • I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions!

    I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions! Thank you

    You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

  • MacBook does not light and indicator MagSafe is weakly Green

    MacBook has become extremely hot and turned off. It does not light and indicator MagSafe is weakly green.

    You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

  • Arm, wrist and the screen does not light.

    I just wanted to give a few comments. When I walk, carry heavy bags and I want to watch the time I lift my arm to look at my Apple Watch and the screen does not light. Maybe its because the movement of the arm is subtle, since I am carrying heavy bags. I was wondering if that could be repaired since both times I tried it, annoyed me. Walk in a street busy NYC with my groceries, I would like to know something, briefly, on my watch as I walk with the duty to stop or to disembark the bags.

    Hello

    It is a community of support based on the user.

    To make sure that your comments and suggestion are presented to the attention of Apple, you can submit the following form (all comments are read by Apple):

    https://www.Apple.com/feedback/watch.html

  • I don't know but its all white: my tablet screen does not light, but the sounds and touch are ok. Please help me!

    I dropped it and now the screen does not light, but sounds like the notifications are on.

    Hi!, Sensei:

    Welcome to Forum!

    To help you, is necessary that you enter make, model (without serial number) and operating system.

  • Equium L20-197 does not light up at all - on button / stop flashes and nothing happens

    Hello

    I own an Equium L20-197 and it currently has a power problem. It does not light up at all. When the device is connected to the machine the orange light comes on to show that there is a power source but when I hit the power button the flash just buttons and nothing happens.

    If I hit him again once all the lights go out and the whole system fails.

    Any ideas on how to solve this problem?

    Thank you
    Alan

    Hello

    Did you put this phone in the standby or hibernation mode?

    Read this description, it seems that the laptop has been in one of these modes and cannot wake up.
    Try to remove the battery from the laptop and unplug the power adapter.
    Several waiting time (~ 20 min) and reconnect the battery and the AC adapter.
    Then try again to put the laptop.

    If she will not be able to boot up the laptop I presume the ESF on the dysfunctions of the motherboard.
    In this case the contact of technicians would be desirable.

  • HP g6-1b60us: my computer hp g6-1b60us laptop does not light.

    My computer hp g6-1b60us laptop does not light.  It was working fine last night. When I tried to turn it on this morning, it not light. When I press the power button, the led by the power cord light flashes 3 times.  I tried the hard reset (remove the battery and the power cord and press the power button / stop for 30 seconds).  What can I do else?

    Please disregard the previous post. I tried a hard reset a second time and was able to get it to the top.

  • My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

    My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

    Hi Heyoabc,

    Please resend your message main here.

    Nick-

  • HP Pavilion dv7t-3000 does not start

    My HP Pavilion dv7t-3000 does not start. I checked this article: http://support.hp.com/us-en/document/c01732674

    According to who, the error condition is: 'non-functional CPU.

    So if I buy a new processor and disassemble the laptop and replace the processor, it will fix the problem?

    Perhaps, but it is much more likely to be the motherboard. If the motherboard is bad, you can't trust the blink codes that it generates. Failures of the CPU but rarely occur. Motherboard failure happens all the time.

  • Update Windows XP with sp3: does not light (error number: 0 x 80070424)

    original title: windows XP with sp3 update: does not light

    I had a virus security 2012, but deleted it and double check run in safe mode. But everything turns right, but went to update windows and its red shield at the bottom right but Security Center see the its 'market '. Then when MS and ran virus check and came back clean, so when updating the site and:

    [Error number: 0 x 80070424]
    The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

    For self-help options:

    To support options:

    Any help? Please

    windseaker,

    A KB was created for the error code 0 x 80070424 that appears when you install Microsoft Windows Update/Microsoft Update. The KB includes an automated Microsoft Fix it 50686 that corrects the problem. Look at the following KB: http://support.microsoft.com/kb/968002>

    Suggest you download and save the fix it.

    Then close all open programs and browsers before running MS fix 50686.msi.

    06/22 / 1109:20:45

  • Pavilion Media Center does not restart after the full system recovery. get the error code 0 x 4001100200001005

    Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005

    Original title: recovery problem

    Hello

    According to the HP Support Forums, this error may be to do with the hard or for other reasons.

    You never have it replaced with a no HP bought in car?

    Read these threads HP on your error code:

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/recovery-disk-error-0x400110020000-1005/TD-p/22936

    http://h30434.www3.HP.com/T5/desktop-recovery-reply-only/trying-to-recover-an-old-PC-error-code/TD-p/964509

    If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.

    See you soon...

  • HP Envy 15 "touch screen power LED appears, but the fans does not and the screen does not light

    Hello!

    I'm a student in computer engineering at the University of Waterloo 1A, and I run a very serious problem with my HP Envy 15 "TouchSmart laptop computer running Windows 8.1. It is a problem that just started today, and I'd rather have a first support here before going to see the technical support Office sometimes tomorrow. It has to do with the screen and the fans where the Power LED lights in white, just as when the laptop works properly.

    (I have warranty on the laptop when it was purchased last June, except that if I find that I need to get a replacement, I'll lose all my work, I did on that since I started my semester.) It's so silly of me not to have all my work saved on a backup, because I have an external hard drive. Problem is, I've had too many problems in getting myself organized, I'm not being open-minded as I should, and worse, I'm not a balance between life and work at home.)

    Before I had my MATH 117 conference (Calculus 1 Engineering), I was in a nearby lab where my laptop was open and turned, works correctly. I've had NetBeans IDE running since I wanted to work on the second part of my current assignment of CS 137 (principles of programming). Because it was almost time for my presentation, I closed the laptop by simply moving the screen down on the keyboard, where it goes into mode 'sleep'. (Whenever I flip to the top of the screen, the laptop is supposed to return, and the sliding screen of Windows 8.1 connection will appear.)

    When I took my seat for reading, I wanted to spend a little time to work on my programming assignment. However, after the reversal of the screen to the top, instead of having the login screen appears, I encountered the problem: the power supply light is showing a white light, but I don't hear the fans between the ventilation openings on the left side of the laptop and the screen does not light. I tried to take the power for several seconds and once button at least 10 seconds, except that the power light continues to display on a white light. The Commission of the Wi - Fi light is not displayed.

    Whatever it is, I don't want to take out the battery because I have that on my last laptop, and it's from there that I couldn't turn to the former, a new market. If I leave the Envy laptop battery, it will short-circuit the connections between the battery and the computer, and so several components will FRY. For now, what I do let the laptop is to empty the load on the battery. Then, once I noticed that the power light does not project a white light, or plug in the AC adapter and try turning the laptop on the power button.

    It will take a little while for the circuit drain the load on my battery but...

    Anyway, please would you be kind enough to help me with this problem? I would really appreciate if you can give me several recommendations. Thank you!

    Hello @GregPDesWHP,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I read your post on how your laptop is not on, and I'd be happy to help you in this case!

    In order to restore the features of your computer once more, I recommend you follow the steps described in this document on the computer does not (Windows 8). If the problem persists after having exhausted all the steps in this document, I recommend you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

    http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

    I hope this helps!

    Concerning

  • The sound on my HP Pavilion G6-1a19wm does not work

    Hi the sound on my HP Pavilion G6-1a19wm does not work.   His "only" works when you use the audio plug with external speakers.   I tried to uninstall the driver, update the driver, microsoft fix - it and troubleshooting steps.  audio device present in the Device Manager and supposedly working properly, mute is "not"on."  visually everything audio related things suggest that the audio is fine and troubleshooting finds no problem... what else could it be?

    Hello

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55036.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  Left click 'Speakers and headphones' (or speakers/HP) once to highlight and then click the Set Default button - check if you now audio.

    Kind regards

    DP - K

  • My pavilion dv7-1132nr does not illuminate. It operates vista 64-bit

    When I turn on my compiuter, it starts, but the screen does not light.  The flashing next to the caps lock as well as the light above end, PG. Prev flashes.  Help, please!

    Hello

    One way to test if there is a problem with the display board is to connect the laptop to an external display and see if you get video output.

    If you do not need to get the CPU replaced, the best advice I have is to find a local computer repair shop and get an estimate (and to confirm the diagnosis) for the cost of the repairs it.

    Kind regards

    DP - K

Maybe you are looking for

  • on my end 2012 see random spontaneous stops

    Starting in the last 2 months I have experienced unexpected stops on my iMac late 2012 with a disc fusion 10.11.5. It's like the Forum someone pulled the plug. To restart I need to reset the PMU. It can happen at any time even at rest. What I tried:

  • Satellite Pro L770 damaged TVALZ_0.sys driver - where to find?

    Satellite Pro L770 does not start after flashing the BIOS to version 1.3 and install the latest version of Toshiba Service station. According to the repair of the Windows system, the c:\windows\system32\drivers\tvalz_o.sys is damaged.Where can I find

  • Model 15g - 260sa: 'Problem' of the SD card?

    Hi people, Just got this laptop for my wife and it's a nice piece of kit, but we 'problem' appeared makes me think that the SD card is defective. When an SD card is inserted on my HP laptop there is a noticeable "click" when the card locks into place

  • MenuItem / JDE 4.5

    I created an app for JDE 4.7 and have managed to add menus using the following code: private class AboutScreen extends MainScreen { public AboutScreen() { super(); setTitle(" About"); LabelField about = new LabelField(); about.setText("Some text"); a

  • Best approach to replace the storage of an ASM diskgroup nondisruptive?

    Hi Experts,Please advise what the best approach is to replace the storage of ASM diskgroup without downtime, or minimal service interruption?Thanks in advance.