HP Pavilion G6: A broad check memory failed

Similar Questions

• Pavilion DV2000 - NMI: parity check / memory parity error

  My laptop was working fine and all of a sudden I got this blue screen with this message:

  Hardware malfunction
  Call your provider of support material
  NMI Parity Check / Memory Parity Error
  The system is shut down

  I have try the recovery disk and the computer back to its factory setting. It will be fine for about a day and then the blue screen light up again. I have try that 3 times now with no luck.

  Can someone please? I'm getting really annoyed that I run my business using my computer every day and I can't continue to recover and reinstall everything every two days.

  The laptop has 150 GB of memory with two 1 GB of Ram.

  What do you mean by delete a module?

  The computer cannot even load into the window before it crashes with blue screen.

  * Just realized there is the notebook section. I have post the same problem on this article and close this one here *.

• HP Pavilion 15 Notebook TS: upgrading memory query

  Hello, I have always supposed to return back and upgraded my memory on the laptop but it took me a few years to get around to it. Could someone help me please as to what max I can go to and what type is needed. Also how many cards is needed for this?

  Model is 15-n260us

  Thank you

  ~ Matt

  There are two 16GB kit, you must deploy all RAM options

  If you are installing 16 GB it would be important to buy compatible kit that crucial returns the money, if memory fails,

  http://www.crucial.com/USA/en/Pavilion-15-n260us-TouchSmart/CT7775558

  http://www.crucial.com/USA/en/Pavilion-15-n260us-TouchSmart/CT5525531

• Satellite C855-1TD begins with the message "checking media [Fail].

  My Toshiba laptop has suddenly refused to work well, does not start. When loading from the initial loading of toshiba screen, a black screen will appear saying "Checking media [fail]" I tried everything I saw online that do not opening my laptop. It won't let me access the Bios and I tried all the combinations available.

  My laptop is a Toshiba Satellite C855 1TD and works on the windows 8.1 software.

  Any ideas? Thank you!

  Hello

  Usually, you should be able to access the BIOS by pressing F2 when starting the unit.
  I can't say for sure, but it seems to me like a serious equipment malfunction if you are not able to access the BIOS.
  Such a material problem serious may be related to motherboard problems, but also modules of memory RAM.

  In case you are able to access the BIOS, check if the HARD drive is still visible on the first page of the BIOS.
  If the disk HARD isn't visible, then the laptop cannot find a bootable device and therefore no error checking media is displayed.

• Satellite C850-B991 cannot start - check Media [Fail]

  Hello

  I have a problem with my laptop C850-B991 Satellite, I can't start Windows and get the message "Check Media [Fail]" on a black screen, I can not also start for the installation of windows media, or install a new version of windows.

  How can I fix this please? I do not have the recovery media (DVD)

  For some reason your HARD drive is not accessible.
  You can enter the BIOS settings?

  If Yes, set it please to the default settings and try again.
  Check please if the HARD drive is recognized correctly in the BIOS settings.

• Satellite P200 - Parity Check / Memory Parity Error

  Hi all experts!

  After updating a driver, I get this above mentioned message.
  + Message ' hardware malfunction NMI Parity Check / Memory Parity Error.

  But just at the moment where the P200 falls in sleep mode. I can't wake up and have to do a hard reboot. Windows is starting and works perfectly and everything seems to be okay!

  Any idea?

  Thanks in advance!
  YB

  Hello

  This behavior can occur if a hardware component malfunctions, or if it has installed the damaged or incompatible drivers.
  I think that you should remove the driver updated or installed first.
  If this does not work, test the laptop with preinstalled system cool.

  Finally if this is insufficient, a hardware malfunction might be possible.
  In this case the RAM modules need to be tested as the first part.

• Hardware malfunction NMI: parity check / memory parity error * the system stopped *.

  I installed ENLWI-G2 802.11 g Wireless PCI Adapter in my Dell Optiplex 760 with XP SP3 32-bit Windows. But it gives me a blue screen with the error:

  Hardware malfunction NMI: parity check / memory parity error * the system stopped *.

  How to solve this error?

  Try to switch on the memory modules. Ask the MS site for more information on the specific error.

• HP pavilion dm1 - test memory failed

  My Hp Pavilion dm1, hangs as soon as windows starts. I went the system diagnostics and ran the development of the system, but it failed. Here are the results:

  Memory test: failed

  Failure ID: 9C4FNJ-5NU6J9-MFH15F-404303

  PRODUCT ID: LW200UA #ABA

  I don't know if I have a faulty memory module or if it is a problem that can be fixed with a system restore? Can someone help me please?

  Hello:

  You need to replace the memory module.

  Try first, remove and replace it.

  If you get the error, buy one with the same characteristics as the bad.

  If your laptop is still under warranty, contact HP technical support for a replacement of the faulty memory Strip guarantee.

  Make sure that you remove the battery and disconnect the laptop power adapter before working inside.

• Pavilion g6: Hard Drive check: short DST failed

  Hi, my laptop doesn't start, I managed the hard drive quick test, with the following report:

  DST short failed

  Failure ID: PLNORG-66H7LD-MFPX1G-60QB03

  Product ID: B4Z95UA #ABL

  This means that my hard drive is over? What I have to change? If I could retrieve the data I have on my C: drive?

  Sébastien Debia

  DST = disk Fail hard drive has not failed and must be replaced. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

• PAVILION ULTRABOOK 14-B005sa: check DST short, Failed. Failure ID: 0G87HT-6MB7JR-MFPX0K-60UG03

  Hello morning

  I ran a dingostis of hardware on my laptop and the result is:

  Short-check DST = failure

  Failure ID: 0G87HT-6MB7JR-MFPX0K-60UG03

  Please advise what means failure ID means and need to be replaced?

  Thank you very much

  AT

  Hello

  Recovery disk consists of the operating system, pre loaded drivers and pre-loading of software.

• HP PAVILION 15-N213SL: DST SHORT TEST: FAILED

  My laptop Pavilion 15-n213sl is not shut down at the end of the judgment: the Start button and fun to still works, even if I changed the settings windows 8.1.

  The laptop still works and I also did the chkdsk, but it results negative.

  Then I did the Complete check Test and stopped on the hard drive showing this message: "' SHORT DST CHECK: FAILED '."

  The error ID is: 9AMPTL-72P81P-MFPWXA-60RH03

  Can someone help me?

  I don't know who told you that it could be a month. Contact HP. They often have a hard drive will send you for installation. It can't hurt to ask.

• HP 15-g088ca: issues of recovery and memory Fail

  Hi all

  I'm having a serious problem. My father's brother-in-law broke this laptop so bad it fails even when you try to run the HP Recovery Manager, or set it to default settings.

  I tried all the options I can think of and now I need help discerning people out there.

  He did something that every time that he now starts upward, it begins with the message to "prepare the AutoFix.

  When I tried all the options out there for a clean, dry and fresh install to simple recovery as it would fail anywhere from 6% to 32%.

  Because it is out of warranty since August, I thought that I would just boot from the CD drive and load a new copy of windows 8 on there but even when I change options startup disk that does not work yet.

  I put back to normal boot options, but now I do not even that.

  Now, when I boot, I get a black screen that says:

  "Boot Device not found.

  Please install an operating system on your hard drive

  Hard drive (3F0)

  F2 System Diagnostics

  For more information... »

  When I do the system diagnostics, hard drive passes but the fast memory check fails.

  Failure ID: Q0FL80-78G7SJ-XD7V7G - 001 T 03

  Product ID: F9J01UA #ABL

  I need help!

  Thank you

  Hi @MiZo,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked into your problem on your computer laptop 15-g088ca HP and the error-Q0FL80-78G7SJ-XD7V7G - 001 T 03.

  This shows me that he has a connection of hardware malfunction. This means that a party does not connect properly.

  Have you tried reinstalling memory and the HDD?

  Once you have done this re-run the Diagnostic tests.
  
  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below! .
  
  Thank you.

• Pavilion 15 t-n200 CTO: memory/hard drive upgrade question

  Hi demand an upgrade memory or hard drive.

  System:

  Pavilion 15 t-n200 CTO

  model: E9Z19AV

  Intel core i3-4005u 1.70 ghz

  4 GB mem

  64 bit

  Fact check on memory sytem and it says:

  1600 mhz DDR3

  Seen a refrence on another site that said for 4th gen proc to use DDR3L... so don't know which one to use.

  Hard drive:

  I was wondering if this unit can use an SSD?

  Thanks for your comments

  Hello

  The link below is the manual of your device

  http://h10032.www1.HP.com/CTG/manual/c04438537

  Supports up to 12 GB of memory system max (module DDR3L 1600 MHz), (Page 2)

  For hard disks according to the manuals, I don't see that it supports standalone SSD.

• wrong time and date in the hp Pavilion a305w pc after adding memory

  I took the tour of the hp Pavilion a305W (Windows XP) PC to a place where they have added memory because it was very slow.

  After that, it would not start by itself, and the Date and time are not good.

  Thanks for your help.

  Hello

  Very probably during the process of adding more memory you may disrupt the battery CMOS (or RTC) or even the chip for the BIOS itself. Please (no need to do this):

  • Reinstall the components autour RAM slots
  • Change new battery for RTC
  • Check the BIOS and reset the date hour away
  • Check the date and time of Windows.

  Kind regards.

• Pavilion Elite HPE-170f Deskto: Memory Upgrade

  I have the HP Pavilion Elite HPE-170f desktop.

  Motherboard: Pegatron IPMTB-TK (Truckee)

  Processor: Intel Core i7 CPU 920 @ 2.67 GHz, 2668 Mhz, 4 Lossnay, 8 logical processors

  Storage media: 6 x DDR3

  Memory type: Types DIMM PC3-8500 (DDR3-1066)

  I currently have 8 GB of memory.

  What is the maximum I can install?

  Operating system: win 10 Pro 64-bit

  Thank you

  John

  @jmwright1058

  Memory upgrade information

  • Architecture memory triple channel

  • Six DIMM DDR3 240-pin connectors

  • Supports types DIMM PC3-8500 (DDR3-1066)

  • Memory non - ECC, unbuffered

  • Supports DIMM DDR3 4 GB modules

  • Supports up to 24 GB on 64 bit computers

  • Supports up to 4 GB * on 32-bit computers