HP Pavilion p6774y - recovery disk problems

Similar Questions

• HP Pavilion G6-1251se recovery disk problem

  Hello

  I have laptop HP Pavilion G6-1251se. It had windows 7 Home Premium 64-bit installed.

  Recently the hard drive that get all the partitions deleted accidentally, including the recovery partition. I don't have the recovery CD.

  Searching on the HP support site I can't find the exact spot where I can download/buy the recovery CD.

  In fact this laptop was bought in the Middle East and currently I am in Pakistan and I don't think it's any HP support center.

  On the page downloads and the driver software of this laptop, recovery disk option is NOT available.

  Can any body if you please help me with this.

  Thank you.

  Hello

  There may be a work-around if you have (or can borrow) an installation disc Windows 7 at retail which is exactly the same version as your OEM installation - IE if your laptop comes with Windows 7 Home Premium 64-bit, it comes to the retail version accurate, you would need.

  If you do not access to the retail drives, you can create an installation disk yourself - just download good picture disc from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD.  These Images are clean and a well respected source, however there are only limited versions available.

  http://www.mydigitallife.info/Download-Windows-7-ISO-official-32-bit-and-64-bit-direct-download-link...

  Use the disk to perform the installation, enter the activation key Windows located on the underside of your laptop when demand and once installation is complete, use the 'method of phone", described in detail in the link below to activate the operating system - this method supported by Microsoft and is popular with people who want just a new installation of Windows 7 without additional software load normally delivered with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  Additional drivers, you may need can be found here.

  Kind regards

  DP - K

• Creation of recovery disks - problems

  Hi all

  I wonder if anyone can help me?

  I recently bought a used HP Pavilion DV6 (DV6-2110ea - product number: VY095EA) laptop and I have problems with the recovery system.

  When I bought it, I managed to recover the system to set up the laptop back to settings by default, and as an afterthought, I tried using the recovery software to see if I could create a set of disks.

  I ran the program expects to be told that the records had been created, but the software came with the message that he has split the partition to create the DVD.

  After a while, he came with a message saying that the disc 2 of 4 was created and asked for the next DVD.

  It seems that the creation of recovery disks never finished original owner and I was wondering if there was a way to start the process so I could successfully create disks.

  Any help you guys could give would be extremely useful.

  Thanks in advance.

  Re the above:

  I have authorized the creation of recovery software complete two final discs that then created file "hpdrcu.prc" in both the location suggested above.

  I deleted the and represented software and it has allowed me to create a complete set of discs.

  Whether if they work, it is another matter altogether, but I'll cross that bridge when I come to it (again - there's always Linux)

  Thanks anyway.

• HP Pavilion p6823w: recovery disk

  For some reason, I lost all my ethernet adapter network, also the partition recovery networks all I called HP yesterday and explained to them what was going on and never got no recovery disk with my computer and need to know where to go to their website to download all that I need Although he told me it would cost me $ 100 for technical support to show me that I've been all over their site and have yet to find something that will allow me to put these drivers and other return ideas

  Hello:

  Here is the link to the support page and drivers for your PC...

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-p6800-desktop-PC-series/5080733/model/5110103

• Satellite A40-151 recovery disk problem

  Hello

  I hope someone can help.

  I bascially bought this new laptop altogether earlier and until recently he works very well, but a few weeks ago the hard drive, I think that then, it happened to the extent where everything would load and then the pc would lock or it would freeze on the windows loading screen.

  Now, I did a little research and from what I could gather my HDD disappeared.

  I then bought a new hard drive for this the same exactually that I had same model, same brand etc and even same GB, which is 30 GB.

  I placed in the new hard drive and went to install windows xp on the recovery disks, but now I get a problem it starts and tries to install the os, but about 15% in the disc stops spining and I get an error 437 that the file cannot be run or something like that.

  I did something wrong? do I need to buy a whole new operating system? I hope someone can help

  Thank you for your time

  If you have purchased this Satellite as new and quite while ago why you pay money for new hardware? If one of the pieces of equipment is defective warranty will cover the costs of replacement.

  As far as I know that satellite A40 is old enough laptop model, and I guess that it takes more than two years. Anyway, if possible try to install the OS by CD Microsoft facilities to determine if the OS facilities can be completed. Maybe faulty recovery CD is (some scratches).

• Installation of Satellite P200-144 recovery disk problem

  Model Satellite P200-144 PSPBGE

  Hi all

  Today I received a 2nd recovery disk mail via UPS directly at Arvato distribution GmbH

  Yet once there not in the exact same place as the 1st disk that I received but returned and they replaced.

  My original recovery disk was lost around the House 3 months back, which I am now myself kicking on.
  Reason for restoring factory default settings was that I wanted my pc to be clean like a cell phone factory default as it was full of registry errors.

  In any case on the problem, after that 67% of image recovery happens with the corrupted file, here is the installation proc.

  Try to rename all the letters of potential left to HDD0
  Try to rename all the letters of potential left on HDD1

  Microsoft DiskPart version 6.0.6000

  Copyright (C) 1997-2007 Microsoft Corporation.

  On computer: MINWINPC

  Disk 0 is now the selected disk

  DiskPart succeeded in erasing the disc

  DiskPart succeeded in creating the specified partition

  Partition 1 is now the selected partition

  DiskPart successfully assigned the letter of the drive on the mountpoint.

  100 percent complete

  DiskPart successfully formatted ther volume

  DiskPart succeeded in creating the specified partition

  Partition 2 is now the selected partition

  DiskPart successfully assigned the drive letter or mount point

  100 percent complete

  DiskPart successfully formatted ther volume

  DiskPart marked the current partition as active.

  Define RECO-info-guid = 4D2AE583-8FD5-4D7D-AE07-B098C1CBA1B5
  RECO-info-imagecount value = 2
  define the RECO-info-partnumber = 1
  RECO-info-numsplit value = 5
  RECO-info-bootindex value = 0

  L ' ImageX for Windows tool

  Copyright (C) Microsoft Corp. 1981-2005 all rights reserved.

  Progress: 67% 06:44 minutes

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  ResourceExtractToFileByStruct: (seq. 50)-> Uncompress or WimCopyFileEx failed

  [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  Error image restoration.

  The file or directory is corrupted and unreadable.

  Error: ImageX could not apply E:\05021XSP.swm Index 2 Weird Vista in C:!

  Is there a reverse this problem?
  My thoughs is that the image is corrupt.

  The error that you declare, is a fault with the Vista disk image cannot be applied to the hard drive.

  Which you used 2 recovery discs of different product, which would indicate that there is not support for product recovery but a defective hard drive, possibly bad sectors on the hard disk.

  If the laptop is in it duration of warranty, then give Toshiba a call for the book on deposit for a repair of the equipment.

  0844 847 8944

• Satellite A200 - recovery disk problems

  I just bought the (all new store big tech) Satellite A200 for a few months and not used because I was on business trip to take. This weekend, I opened it up and running for a while.

  After that I read the manual and found that I need to create a recovery from the tools provided disk. However, the problem start here:

  1. when I click on "Recovery Disc Creator", a message is display "no HDD Recovery area!, the toshiba Recovery Disc creator cannot be launched."

  2 then I call center service support and to inform that there is a problem with the "recovery disk creator" and I have to retrieve the laptop using the hard drive partition recovery (waiting when 0 turning on the system) and the next step is complete:
  a. the laptop's boot in the recovery screen function.
  b. when I try to "restore windows PC" (option 3), it is display and error message on file not found.
  c. when I try to click on "restoring the recovery disk" (option 5), it asks me to put in the recovery disk which I do not have?

  NOTE: I'm sure that the hidden recovery partition is therre. 1.46 GB. There is no way that I can access the hidden partition from a normal windows vista screen (without drive letter).

  Then, I called the support center again (now what difference person support) and to inform you that:

  1. my recovery partition is corrupted and I need to get the recovery disk again (which I did not), it's going to cost me AUD $66 (I got from HP one and cost me AUD $15 and will be free if I come and Pick-up) for administrative costs. And it is a procedure.

  2. I explain to the support staff that it is brand new in the box laptop and I consider it as defective on arrival (DOA or FOA.

  3. I also ask what causes the problem and has been a consultant with the following reason:
  a. I may have deleted the partition accident (impossible because I still can start on the recovery partition, but can not recovery which all).
  b. There may be a virus infect in my laptop which was remove my recovery file in the hidden partition (ridiculous, you can delete some files in the drive on which you cannot yet access).
  c. I should create a recovery disc when the first time LAPTOP computer service. Which it is recommended, I get a question that if I do not, or I forgot to do so, this means that the software will automatically delete the system restore image file? I have no answer for that.

  State (when I try to post this messgae), I'm still waiting for the staffs of complaint call fomr back (very tie when you talk in support of service these days).

  NOTE 2: I would like to raise these issues, not because I want something (I do both IT support) complaints but I just want to solve the problem:

  1. is there some sort (software) allow me to access the hidden drive in and out of recovery disc image, my laptop still have the partition.

  2. is there a link I can download image recovery (in iso format) disc again? I've known it is not a question of wise, but when I ask the support staff that can re - install windows vista with the license key from the bottom of the laptop and has advised that it is not work or turn on.

  3. is there someone out there has similar problem

  Hi Thomas

  I have a European model A200 (don t know what you model is) and the A200 was NOT equipped with the option of HARD drive recovery! This means that you cannot create your own recovery disk!
  My laptop came with the Toshiba Vista recovery DVDs!

  Still is it that your 1.46 GB hidden partition is not the Toshiba recovery partition but Vista hidden partition. It contains the WinRE files that are useful for repairing the operating system if something will go wrong!

  Second, the Toshiba Recovery folder is too big for the partition of 1.46 GB!
  So it is not possible that it would be placed on this s partition!

  So finally, it seems that you will not be able to create the own recovery disk and therefore, you have to order it from the ASP in your country.

  Welcome them

• Satellite A300D - creating recovery disk problem

  Hello.

  I have Toshiba Satellite A300D-11 t (extended A300D-11) and I would like to create recovery disk. Problem is that I can't run the Toshiba Recovery disk creation tool. There is no shortcut in the start menu.
  I tried to run Program Files.

  Program itself exists (or at least I think it does), there are files in the Program Files folder, in "Programs and features" program is also so I could remove it.
  Simply click on the file TosRDC.exe (or any other file *.exe in this case) and it does not start.

  For memory - recovery partition exists and has not been changed.

  System - Vista Home Premium 32 bit.
  What should do?

  Hello

  I would say to pick up the machine from the disk and then, immediately after the machine, you should try to create a recovery disk. It could be that something in the meantime destroyed some piece of software in your operating system that could be the reason of this problem.

  Maybe not a very elegant solution but the only one that works every time.

  Welcome them

• Pavilion a6330f, recovery disks

  How can I order recovery discs for an HP Pavilion a6330f desktop computer? Operating system is Windows Vista, Home Premium (32 bit). I'm afraid that the hard drive may fail and want recovery disks in this case. Other software and data are saved.

  Hello

  It is always interesting to see if you can still order a set of replacement of the HP recovery discs - see link below.

  Order HP recovery disks.

  If they are not available at HP, they can also be ordered from reliable third-party reseller on the following link.

  http://www.computersurgeons.com/ProductDetails.aspx?ID=6351

  Kind regards

  DP - K

• Need HP Pavilion M9350F recovery disks

  Bought a HP Pavilion M9350F which had its hard drive wiped. HP stocks are no longer the recovery disks. Research on Google, ebay, etc. have not found a set. Can I get help to find a set, please? Thank you!

  Your models page still lists the value of recovery as being available. Of course the link is dead as usual for 98% of the time;

   

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2100&LC=en&DLC=en&cc=us&lang=en&product=3747345

   

  Try Chat, e-mail or phone here > Contact HP

• Satellite L300-147 recovery disk problem

  Okay, so I lost all of my drives for my laptop (story tl; dw) and then it dies. I have order a new Toshiba Recovery disk image and start running repairs to it.

  Pull upward, press F12, select CD/DVD from the Start Menu and press ENTER.
  It gives me a message "Windows loading flies... "and a progress bar.
  Progress bar ends, clears the screen, there are about 30 seconds of animation 'The thought of Microsoft Bar', the computer is hard drive/CD drive noises.
  Then...

  Nothing happens.

  For ten minutes, nothing happens.

  Except a piece of my electricity bill is consumed by the white backlit screen.

  All words of advice, support, etc. greatly appreciated.

  Mark

  Hello

  At first, I can say that this recovery disk cannot be used for repairs. You can only use it for the new operating system installation.
  Behavior described is certainly not OK and you should be able to see the menu with the language options listed.

  What you can do?
  I'm scared of m not big thing. BIOS setting to default and try several times to see if you're lucky and the installation of recovery will be properly implemented.
  For testing purposes, you can try to get the Microsoft installation disc and see if the installation of the operating system starts correctly.

• satellite boot and recovery disk problem, help please...

  Hello

  Well, here's the question. My satellite is a few years old all of a sudden, she leaves the start. Gets the starting address windows xp mode then hangs and repeats the process. So I thought, well... I just install my recovery discs...

  Well well, thank you for a reason, and his frustration as what... I get an error of bad machine. Don't allow me to install my recovery disks. Call toshiba, they say my warranty has expired have to go pay a service representative... Arrgh...

  This was purchased new and this is the correct machine...
  Anyway... when I'm bad machine, I get:
  Failed installation aborted/a process!
  A:/>_
  I'm assuming, there is something I can type here to recognize my machine... Any ideas? Toshiba was no help. Or... If you have an idea how can I start this thing without recoery disks.

  Thanks in advance...

  Hello
  before anyone can say anything, I would be nice to know what type of laptop you have.
  Cause Toshiba has in the meantime changed the recovery process.

  Good bye

• HP Pavilion DV2000: Recovery disks

  I had to reinstall windows after a HARD disk crash. After the installation of Windows 10, I tried to create recovery discs. Windows comes to the verification phase and then says it cannot complete the task. I tried to erase the drives and Windows says it can't complete the task. I tried to copy and paste the D drive and that doesn't work either. I use Phillips dvd double layer and the issue is not the disks. What can I do to make the recovery discs as Windows seems to block the creation?

  Greetings,

  You can not HP factory recovery disks after upgrading to win 10.

  You can also copy and paste the recovery partition. D: drive is now useless. It helps nothing.

  What you need to do is go here and download Win 10 Microsoft installation media.

  If you want the recovery media Win 8 HP, you can buy HP recovery discs. The product number you provided is not specific. I can't direct you to the HP site to achieve this goal.

  Hemdani

• Tablet XP Recovery disk problem

  My Tablet PC hard drive just died and I need to do a reinstall.

  My tablet XP Recovery disk does not work on a fresh HARD drive, but I still have my code.
  What can I do to get my laptop back operating and running system?

  Hello

  • What is the brand and model of the Tablet?

  You cannot install the Windows operating system with recovery disk.

  I suggest you to contact the manufacturer.

  See also:

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

• HP Pavilion dv6: recovery disks ordered HP but recovery is a FAILURE...

  The hard drive failed on the laptop and I got a replacement after all operations of chkdsk drive, which has been formatted without problem in the initial recovery stage.  Classified into recovery disc for HP Pavilion dv6.  Insert the first disk and everything goes OK.  Load the 2nd disc and everything seems to be OK.  Load the 3rd disc (Supplemental) and everything seems to be OK.  Laptop restarts for the first time, starting Windows starts, starts the Software Installation section.  2nd restart start automatically then start Windows appears.  Additional CD is drive all the time.   The Recovery Manager window appears and indicates "recovery has failed.  Select one of the following buttons:...  Now, I save the log.  The log file is saved as. HP_SSRD_LOG SRD.

  --------------------------------------------------
  [17:47:22.78] enter audit OS Edition...
  ----------------------------------------
  [17:47:22.80] check RStone.ini file to determine the required edition.
  [17:47:22.83] out of checking OS Edition...
  --------------------------------------------------

  --------------------------------------------------
  [17:47:22.85] controls if the upgrade to Windows 7 is required.
  ----------------------------------------
  [17:47:22.86] current edition is [HomeBasic]...
  [17:47:22.86] [start] necessary. Don't need to upgrade...
  [17:47:22.88] [Starter] needed...
  [17:47:26.67] necessary [Starter] edition. But is not the case of the [Starter] OS...
  [17:47:26.67] OS edition upgrade might have a problem...

  Management and maintenance of deployment images tool
  Version: 6.1.7600.16385

  Image Version: 6.1.7601.17514

  The current edition is:

  Current edition: HomeBasic
  The operation completed successfully.

  Component: TDC Preinstall diagnosis Tools for Windows 7 - TDC
  --------------------------------------------------------------
  Error: no OS flag not set on the device, please use EEPROM to set ~ OS SKU ~ value = 2
  [17:48:11.96] ------------------------------------------------------------------------------------------
  ...
  CTO error condition has been undergoing dtected [update Factory]! ***
  [17:48:11.96] Suggest create PIN-journal and send to TWN PDC NB-PreinPM for further analysis...
  ...
  [17:48:11.97] ------------------------------------------------------------------------------------------

  [17:46:33.77] Start BBOffline.cmd...
  UPDrv = [C:]
  [17:46:33.80] value UIA 951 error Code
  [17:46:34.36] WinPE is 32-bit.
  [17:46:34.36] start [corrections].
  [17:46:34.39] ---------------------------------------------------------------------
  [17:46:34.39] FixUps.cmd...
  [17:46:34.39] create overall progress information...
  [17:46:35.75] complete FixUps.cmd...
  [17:46:35.75] ---------------------------------------------------------------------
  [17:46:35.75] start [Tweaks for SDRD].
  [17:46:35.77] ---------------------------------------------------------------------
  [17:46:35.77] SDRD Tweaks to change the regional settings default user...
  [17:46:35.77] copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES. DLL.
  [17:46:35.89] Run "Dism.exe image:C:-/ Set-SKUIntlDefaults: en - U.S.-image: C:
  [17:46:42.32] ---------------------------------------------------------------------
  [17:46:42.33] start PININST.exe for offline...
  Housing starts [17:46:55.19] [Sleep 10 sec].
  Starting price [17:47:05.28] [creation RStoneFUpdate.INI].
  [17:47:15.00] start [create 1 GB Pagefile for offline].

  Volume in drive C has no label.
  Volume serial number is 4CE2-BE2D

  Directory of C:\system.sav\bbv

  12/26/2014 pagefile.sys 1 073 741 824 17:47
  1 file (s) 1 073 741 824 bytes
  0 44,734,984,192 dir bytes free
  [17:47:15.06] the mark detection.

  [17:47:15.30] ---------------------------------------------------------------------
  [17:47:55.53] Start SysID Check...
  [17:47:55.98] Start Option control code...
  SKU_DEF_COUNTRY = [244]
  SKU_DEF_SYS_LOC = [en]
  ------------------------------
  Reset the country in administrator...
  ------------------------------
  ------------------------------
  Reset the default user countries...
  ------------------------------
  ------------------------------
  System reset located
  ------------------------------

  Management and maintenance of deployment images tool
  Version: 6.1.7600.16385

  Image Version: 6.1.7601.17514

  Statement of the international settings offline.

  By default system UI language: en-US
  Settings system locale: en-US
  Default time zone: Pacific standard time
  The settings for the default user regional: en-US
  Location: United States (GEOID = 244)
  Active keyboard (s): 0409:00000409
  Keyboard layered driver: PC / AT Enhanced Keyboard (101/102-Key)

  Installed the language (s): en-US
  Type: Fully localized language.

  The operation completed successfully.
  ------------------------------
  Updating the system locale info...
  ------------------------------
  [17:48:06.81] Start PIN Tweaks...
  [17:48:06.85] ---------------------------------------------------------------------
  [17:48:06.85] PIN Tweaks to hide all for BurnBoot PBO and BBV2 on restored image...
  [17:48:06.85] ----------------------------------------
  [17:48:06.85] Tweaks to Unattend.xml of OOBE
  [17:48:06.85] to pick up the right file...
  [17:48:06.85] ----------------------------------------
  [17:48:06.85] rename unattend.org to unattend.or_
  [17:48:07.01] ----------------------------------------
  [17:48:07.01] without light sensor...
  [17:48:07.03] ----------------------------------------
  [17:48:07.04] it is restored by SDRD [SSRD.flg] image...
  [17:48:07.04] ---------------------------------------------------------------------
  [17:48:07.07] Start MIR Tweaks...
  [17:48:07.12] ---------------------------------------------------------------------
  [17:48:07.12] [MIR Tweaks]...
  [17:48:07.12] ---------------------------------------------------------------------
  [17:48:07.15] starting factory updates...
  [17:48:09.10] installation start QFE offline...
  [17:48:11.78] PININST_OFF: PAST...

  [17:48:11.83] Type C:\System.sav\Logs\BBFindEr.log...

  [17:48:11.83] Type C:\System.sav\Logs\BBFindE0.log...

  -C:\SYSTEM. SAV\LOGS\PININST_OFF. JOURNAL
  Result = PAST

  [17:48:11.86] Type C:\System.sav\Logs\BBFindEr.log...

  [17:48:11.88] Type C:\System.sav\Logs\BBFindE0.log...

  -C:\SYSTEM. SAV\LOGS\BBFIND4QFE. JOURNAL
  [17:48:11.88] FUList.log to check if there are double Desc...
  No duplication.
  [17:48:11.96] duplicated No. Desc is located... PAST.
  [17:48:11.96] there was no update from the factory...

  With all due respect this FYI is a user forum if we don't remember that. If you had problems and did not keep telling them something is wrong and also I and others here have no proof of your experiences. And since you threw the material person else or HP can help you now.