HP Pavilion p7 - 1227c: HP Udate

Similar Questions

• Pavilion p7 - 1227c needs the network drivers that work with Windows 2008 server R2

  I bought this new Pavilion P7 - 1227C at Costco so that I can install Windows Server 2008 r2 with Hyper-V role

  I managed to install Windows 2008 server but unable to t the wireless or ethernet to work.  I tried to use the driver 64 bit Windows 7 without success.

  I think return Costco if I can't get the network driver that will work with Windows 2008 Server R2

  Thanks, in advance.

  Tour37

  Hi Paul,.

  Thanks for the link, I was able to download AR816X_V.0.14.15_WHQL.

  The driver works for Windows 2008 Server R2.  I just need to find the drivers for the wireless card.

  Best regards

  Round 37

• Pavilion p7 - 1227c: SSD install problems

  I have a Pavilion p7 - 1227c. Only the keyboard and mouse and connected monitor.

  I installed a new 240 GB Intel SSD Kit.  I released the original disc of 2 TB and used the SATA and power for the SSD connectors.

  I restarted and put the 1st recovery of 4 DVD in the slot.  Next-System Recovery (run the media program) started with the installation process,

  restore the factory step 1 image, reformat the HD windows partition, but stopped almost 29% in 1 DVD with the following message.   "hp recovery manager cannot restore your computer by using the original image.  "Please contact HP support 0xe0ef000e error code.

  Which is weird, the recovery dvd created 4 partitions on the SSD drive-> (100 MB/Healthy primary part, 98 GB/Healthy primary partition, 110 GB unallocated and 17 GB primary partition ACTIVE healthy with a startup folder, hp, preload and recovery).

  My goal is to have SSD boot windows 7 and applications. and the 2nd disc (the original 2 TB) for all files (documents, photos, music).

  To start, I recovered and connected the original 2 TB drive with SSD and looked 'disk management '.  The SSD is showing with NTFS.

  So, how can I get windows 7 installed from the recovery on the SSD disks (with or without the original disk is connected?

  I wanted to do an install clean, but anyway to copy of win 7 into the SSD?

  So I messed up in the installation procedure.  Best way to start over.

  You are the very welcome, Chuck.

  Unfortunately, it seems that the links have been removed.

  You can try the file Home premium of the site... all the way at the bottom of the page.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Other than his software use of cloning to get installed W7, I don't know any other way to make it happen.

• HP Pavilion p7 - 1227c: GDDR5 graphics compatibility question card XFX Radeon R9 380 4GB with HP Pavilion p7 - 127c?

  I bought this Radeon R9 380 4 GB from Ebay and installed it in my computer, but it won't work. Turn fans of the graphics card but the PC screen remains black. I contacted the seller who said that the video card has been tested prior to shipment and that it may be a compatibility issue with my PC. I know that this graphics card has a PCI Express 3.0 interface 16 x so that my PC has a PCI Express 2.0, but I don't think that this could be a problem.

  Do you know if there is a problem of compatibility between the graphics card XFX Radeon R9 380 4 GB of GDDR5 memory and the HP Pavilion p7 - 127C?

  Note: I move the power supply to 650W.

  @Astyx, welcome to the forum.

  You are right that the PCIe 3.0 is backward compatible with PCIe 2.0.  However, your problem is the motherboard.  The Radeon card requires UEFI in the motherboard instead of a Legacy BIOS. The BIOS may not be walking in the UEFI.  PCIe 3.0 cards requiring UEFI will not work in any other location.  HP didn't start using UEFI until mid-October 2012.  The latest maps to exploit without UEFI are the GTX 660/670.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• How to enable virtualization in the BIOS of HP Pavilion p7 - 1227c

  I was able to install Windows 2008 Server R2 and hyper v Server. The problem happens after you create the new virtual machine, and then start, this "the virtual machine could not be started because the hypervisor is not running.

  Thanks, in advance.

  Tour37

  Hello:

  I would take a peek here just to make sure...

  

• Pavilion p7 - 1227c: checksum error BIOS error

  When I launched HP Support Assistant, I received a notice of updating the Bios from the tab "updates to the updates and".  When I tried to follow the instructions I got 7-BIOS checksum error during installation of HP

  My current system bios is 7.07.

  What I do need to update or was it a mistake?

  It's just a warning... Please see the document from the following link that helps you solve this error message:

  http://support.HP.com/us-en/document/c01368145

• Windows Server 2008 on Pavilion h8-1170uk

  I am trying to run Windows Server 2008 on a Pavilion h8-1170uk. The software works ok but will not connect to the network. I found a thread on the forum to discuss a similar problem with the Pavilion p7 - 1227c, which recommends a link for the appropriate drivers. However, these drivers do not work on my machine because it has a Realtek network controller, while the p7 - 1227c has an Atheros one. Are there any appropriate drivers for my machine?

  Hello:

  The driver on the link below should work for you - a 6th on the list (Vista and WinServer 2008 Auto Installation Program (SID: 1568647)).

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• UDATE drivers pavilion g7 2340dx

  When I hp.com support scan my pavilion g7 2340dx updates the driver he says "HP could not verify that you have this product, but found other products."  What do they mean that I am sitting here use it?  How to cross such a stupid statement?

  I found a diagnosis.  I don't like admitt it, but now I don't know if it was a Windows or an HP diagnostic (Itried everything I could find) it seems to have corrected the problem.

  Thank you

• How can I ensure that I have usb2 working on pavilion dv8? It does not appear in Device Manager

  Hi all

  I'm trying to configure a USB external (interface audio) on my HP Pavilion DV8 1250ea. The device driver fails to install properly and is unable to detect that the device is connected (even if I hear the Ding-Dong, and he appears in the Manager of devices, but with an exclamation point).

  I went to the device manufacturer's support and they advised me that the problem is likely to be caused by my system doesn't support USB2. They also told me how can we test this hypothesis - I looked at the Device Manager and told me I'd see something like:

  http://www.native-instruments.com/knowledge/images/General/USB_power.gif

  However, mine is:

  http://img99.imageshack.us/img99/3236/nousb2.PNG

  See, no USB2!

  I just checked the section support and chipset installed udates and other things that sounded relevant - still no change. My system really not support USB2 - it has clearly stated in the specifications that the model does support. This seems to be the most likely reason why my audio interface does not work.

  Thank you very much!

  Hello

  Click on the link below:

  How to check for support of high-speed USB (USB 2.0)

• No longer udate apps. Using the iphone 5 and ios9

  No longer udate apps. Iphone aid ios9 and 5. Any clue?

  Have you tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data, but it can cure a few glitches.

  Restrictions put in place in settings/general/Restrictions? If Yes, turn them off and try again.

  Can update you the apps in iTunes on your computer, using the same identifier Apple?

  Error messages given?

• iTunes does not recognize my iPhone on my HP Pavilion Windows 10 5s, so cannot sync the phone, which has the latest operating system running

  iTunes does not recognize my iPhone on my HP Pavilion Windows 10 5s, so cannot sync the phone running. I downloaded the latest OS for the phone and the latest version of iTunes on my PC and have tried all USB ports several times. I also reinstalled drivers USB to the PC.  The phone is recognized on the computer of a friend under Win 7. All shows when I plug it on mine is a page showing the 'Apple iPhone' folder display of storage internal (2.18 GB free of 14.7 GB). Troubleshooting in devices and printers, where the phone displays as "Not specified Apple iPhone" generates a message saying that "Apple iPhone is an older USB device and may not work with USB 3.0 and plug it into a USB 2.0 port." But when I use USB 2.0 (I tried several times using each of the three USB ports on my PC), troubleshooting the error message says "Apple iPhone won't work correctly with USB 3.0." This seems to be a recent problem, since in March 2016, I could spend a few songs from my PC to my phone using iTunes.

  I wish I had some ideas of people who have experienced this problem, I find to be a more frustrating one.

  Well, you aren't the only one. This just freakin happened to me. I spent the last three hours with apple and Windows supports. Now I'm reinstalling Windows 10 by last resort of Windows support councils. I got the same message USB. In iTunes, under devices something removed my 5s and the iPad. But it remains 6 s wife. I tried my computers 2-(SS) 3.0 ports and 1 port 2.0 ordinary. I tried all four thinners cables I have. I will let you know the result of the Windows reinstall.

• Pavilion dv7 6163 cl: unlock (reset) password on BIOS/CMOS for HP DV7 - 6163cl

  The bios of my notebook (Pavilion dv7 6163 cl) blocked by password, and I never put a password. Could you help me solve?

  Enter the wrong password 3 times or simply leave them blank and press success enter 3 times. You should get a stop code. This zip code here.

  https://BIOS-PW.org/

• Pavilion 15: Bios password

  I have a Pavilion 15-e022sa which I just can't get into the bios as it says I need a password that I never put someone could please help

  Hello

  Enter 60081217

  Kind regards

  DP - K

• HP Pavilion dv7: unable to connect to the Internet

  I can't access the Internet via ethernet or wireless. It seemed to happen after an update of Windows 10.

  Other computer and android phone can access the wireless. When I click on the wireless icon, I see different networks, including mine. However, it is said, "No Internet, secure." I ran a diagnosis, saying that the wireless network adapter and the wired network adapter does not work. I tried to update the drivers, but to no avail.

  I remove this update. I have HP Pavilion dv7, produces none. QJ799AV #ABA. It seems that there are no drivers for Windows 10.

  Here in an Exchange I had with HP Support on Facebook:

  Resolv_S wrote:
  

  Hi@ekdman,

  Thanks for stopping by the HP's Support Forums. Best platform for all kinds of solutions, tips and settings for your questions/problems.

  For the best experience on HP forum, see our Guide to HP Forums to learn more.

  Help with the purchase of a recovery media. Is this fair?

  Thanks for sharing the question. I want to help you.

  I understand the disadvantages that you went through to find the solution for the issue.

  I would like to share a link to order you a recovery HP online support. Please use the link below to order the media.

  http://HP.care/2dMsChn

  I hope this helps. Please update the State of the question,

  Happy announcement.

  Resolv_S

  Happy to help you. I work for HP
  
  Please click on " ""Accept as Solution " " " if you feel my post solved your problem, it will help others find the solution.
  Click on the " Bravo Thumbs Up" " " to say 'Thank you' to help! "

  Thanks for the reply.  However, I took the chance to do a reset on my computer.  And now I have access to the internet.

• Pavilion dv8: problem with Pavilion dv8 (treble/bass control) Windows 10

  I had my Pavilion dv8 for awhile.  I started having problems with the slider treble/bass control. He would sporadically pop-up and begin to change the treble or bass at irregular intervals. He also unplug randomly my wireless connection. I tried to solve the problem by downloading a driver, but the problem remains. At first, it was just a little annoying, fixed by clicking the mouse or pressing the upper button of the internet, but now it of REALLY boring, popping up even as I write this post. But there is no driver for Windows 10. Someone at - it solutions?

  Thank you for your help

  Merah

  Hi @Merah

  Welcome to the HP Forums.

  I would like to take a moment and thank you for the use of this forum, it is a great place to find answers.
  
  If I understand correctly you are facing problem control treble/bass in your laptop.

  I would like to know the number of full model of your laptop so that I can better help you with this problem.

  Thank you.