Pavilion p7 - 1227c: checksum error BIOS error

Similar Questions

• BIOS rom checksum error

  I have a bios rom checksum error on my hp pavilion a6530f. I replaced the battery on the motherboard and reset the CMOS but it still shows the black screen of death with the messages.

  BIOS ROM checksum error

  IDE ATAPI device detection...

  Found CDROM, try to start her... In case of failure

  Detecting A floppy drive media...

  Insert system disk and press enter

  and beep every few seconds.

  I do not have a system disk and when I try to press F10 or F1 to access the window with the version of the bios information, according to the instructions I found on the HP site, nothing happens. I can't also find a download for any bios drivers for my pc on the Web site.

  Before this past that I have had some freezing problems and a lot of questions of adware.

  I used to operate and maintain fuji printing and developing of films but I'm kinda a tyro when it comes to PCs.

  Is that mean that the motherboard is fried? Or if not, where can I get the download that I need to solve this problem?

  Hello again cienerose,

  If you type the F10 at startup and nothing is happening on your computer (you don't get in your BIOS) then the problem you describe seems to be a physical problem, and I think it would be better if you contact HP Support for service options.
  
  I want to thank you for display on the HP Forums. Have a great day!

• Checksum error message incorrect A250 aftetr Bios Update on Equium A100

  I received the message 'bad checksum A250' to restart after update Bios on Equium A100 - psaa4e Windows XP home sp3.

  Update 20070709121820 installed BIOS downloaded through this Web site.
  I installed directly from the downloaded file.
  System seems to not operate normally if have I messed up anything?

  Hello

  This message always appears during the clean boot procedure or it appeared only once?

  Generally 'bad checksum' error message if the CMOS battery does not work correctly.

  But I have no idea why you get this message after update BIOS... Anyway if the laptop works correctly after updating the BIOS then you should t be worried.

  See you soon

• HP model #A6000n Bios Checksum error after update Bios!

  I did update the Bios posted on the Hp website... After the reboot, all I get is this error, "BIOS Checksum Error", the black screen then looks for a boot diskette drive (this computer has not), then it looks for a boot on the CD drive disc.  Now, I talked to HP support and they say I have to order the recovery disks.  Someone can send me a bootable file that I could burn it to a CD for this model machine and get it operational?  I have an older machine here that would allow me to make a bootable CD, but I have no idea where to find some sort of update of the BIOS and or file bootable to Flash the BIOS.  I am so angry that HP wanted me to buy this CD recovery program has just returned in Windows Vista.  But, I don't know what to do because the update of the BIOS must have been corrupted when I flashed the motherboard ASUS.  This computer is my aunts and she failed to save restore disks and now I'm lost as to lift this thing up and running... Help, please!

  Thank you!

  As I said, if you have a floppy is easy, especially since the computer diskette is XP. OK, let's go.

  (1) place the disk in the drive

  (2) open my computer and right-click on the floppy drive

  (3) choose the format on the menu that appears

  (4) put a check mark in the box "create an MS-DOS startup disk".

  5) click on 'start '.

  When 6) filled the awdflash.exe on the diskette copy

  (7) right click on the file of BIOS from HP

  (8) to move the mouse cursor in 7 - zip and click "open archives".

  (9) double click on the folder icon in the new window

  (10) right click on the ROM file - in this case 513. ROM

  (11) choose "copy to" from the menu and browse it on the floppy

  (12) when it is completed, the disk should be ready to work

  (13) move the floppy drive cable and the Ribbon in the Vista computer.  He didn't need to be mounted, but make sure that it does not touch something metal (participation of books will be good) and connect the water and the power supply to the motherboard and the power of the Vista computer (of course, it is done with both computers turned off and unplugged)

  Now ready to go on the Vista computer. When you press the power button on the computer, there will be a splash of HP come screen upward.  From this screen, press her "enter the BIOS' or 'Boot to install' as shown.  I forgot to ask if this screen appears in the previous posts.  If this screen does not appear then it will be much more difficult.

  When in the BIOS, look for boot order and then set it can boot from the floppy first.  Save the selection to get out.

  (14) reboot - should end up with a cursor blinking in the upper right

  (15) type AWDFLASH 513 rom/py/sn/cc , and then press ENTER.

  (16) when and if he finished power down and remove the drive from the computer disk

  That should do it.  If this does not work or there are problems come back with an explanation of what was happening.

  Of course, to do this at your own risk.  I'm just trying to help.

  
  

• Help on Checksum error, BIOS freezes... Windows XP

  I have a desktop IBM 621932u.  Master 40g HD, 320g slave.  Operating system is Windows XP Professional.  He was not connected to the Internet since the 07.  I mainly use it for music production.

  I tried to connect a SONY HD TV to the video card.  Of course I had to change the screen resolution sizes.  Shortly after changing screen resolutions that would flicker the entire map video, then black.  I thought that it could not handle the HD TV.  I'm stopping with the power button because I couldn't see the screen click 'stop '. I reconnected my regular monitor to the video card and rebooted, reach out to the office.  To try to change the resolution of the screen to its original state, all of the computer froze and the screen went white.

  Upon restart, the computer would not let me go beyond the Professional Windows XP splash screen before the screen would go black and it would freeze.  I reached 44 attempts to restart failed (the cpu was told that).  It got to the point where I couldn't do it at the startup screen and it would freeze just after the BIOS splash screen.  I changed my BIOS back to default settings.  Nothing changed even after that.

  I checked my memory.  There are two sticks of memory.  Try to restart with a stick, then two, then alternating them and then finally let them all together (of course, this did not worked but what the heck right?)

  I had a hard drive of 40g with Windows XP installed.  He also wouldn't let me go beyond the XP splash screen!

  Then I had a checksum error, and the cpu does not load beyond BIOS.  I changed the battery, but it still freezes.  Occasionally, he would give me access to the XP splash screen, but it will freeze once a single bar flies through the screen.

  Once again, a mosaic of colors appeared on my screen to enter the BIOS.

  Sounds like you damaged your video card. Take it out and install a well-known work. If this is the problem, take the original video card. MS - MVP - Elephant Boy computers - don't panic!

• HP divided x 2: BIOS Checksum Error (502) HP Split x 2

  A couple of days, I turned on my laptop (product number: G6Q88UA-#ABA) to see a black screen with white text saying he had a (502) BIOS Checksum error and press ENTER to reset the values and continue with my system startup. Once, I have to update to the current time. As the days passed, I noticed that I was unable to turn on my laptop without plugging it into the wall, and disconnect it would cause my computer turn off and therefore lost all of my work (and time settings). My poking around led me to him or the other being the CMOS battery, or a corrupted BIOS. I believe that my BIOS is up to date, and my model does not appear to be a CMOS battery.  Can anyone help? Thanks in advance.

  Hello @MValdiv,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I came across your post about the BIOS and wanted to help!

  I have not seen a BIOS update for the operating system Windows 10 of your product.  You can try to install the BIOS for Windows 8.1.  Also, try to review the following document and let me know how it goes: HP PCs - BIOS HP Application selected is corrupt or missing

  Please let me know if this information has been helpful by clicking the thumbs up below.  If this post has solved your problem, then please click accept as a Solution.

  Have a great day!

• BIOS rom checksum error does not start

  Compaq

  will not boot at all

  When I turn it on it automatically goes to a black screen that says:

  Award Bios BootBlock v1.0

  Copyright (c) 2000, price Software Inc.

  BIOS Rom checksum error

  keyboard err or no keyboard present

  IDE ATAPI device detection...

  Found CDROM tries to boot from the pass it...

  can anyone tell if this can be fixed if it can and you know I would appreciate it a lot

  Oh and I got a windows vista disc to see if it downloads it, but just on the same screen

  The "boot block" needs to load the rest of the BIOS of a memory chip. Since it doesn't, either the battery on the motherboard (a piece the size of a $0.25 coin silver) has failed, either the content of the memory chip cannot be read.

  Replacing the battery is fairly easy.
  First of all, notice the writing on the top of the battery.
  You will need to put the new battery into the socket,
  with similar writing facing face up into the socket.
  Look on the edge of this battery to a small 'finger' which holds the battery in its socket. Push this "finger" of the Center, and the battery must be able to be raised.
  Remove the accumulator at any computer store and get a replacement.
  Insert it, and then try again.

  If the problem persists, then either he must:
  * Replace the motherboard
  * replace this chip memory (which can be soldered on the motherboard at all times).
  * replace the computer, taking the disc drive of the old computer and its connection as a 'slave' the drive in the new computer.
  * take your computer to an expert technician.

  The attempt to boot from the CDROM is a process "emergency", to use when you have a specially created CD disc that contains a copy of the software to load into the memory of the BIOS chip. It is not a 'normal' start (to load the Vista disc).

• Boot fail error bios checksum after bios update

  Oh, im so nervous I "update" the bios of my Compaq SR5027CL with this http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-66758-1&lc=en&dlc=en&cc=us&...

  I have download and run this patch and the program tells me that the bios has been updated sucefully and push me to restart, so I click ok to restart, but now doesn't boot men, does not show the compaq logo, no nada, shows only a black screen with messages following:

  BIOS AWARD 2000

  BIOS CHECKSUM ERROR...

  TRIYING TO BOOTING FROM A FLOPPY...

  TRIYING TO BOOTING FROM CDROM IDE...

  BOOT DISK ERROR BLAH BLAH BLAH AND THEN BEEPS SOUND, THEN SHOWS

  TRIYING TO BOOT FROM THE DISKETTE HAS...

  that can make an i?, please help me

  Hi Louis,.

  I see that the options for the F1 / F10 and F5 do not appear. I do not recommend that you try the AFUDos BIOS disk once. I have researchedthe plug on your motherboard and you are right. The BIOS for motherboards series M2N68 ASUS sitewill not help because they have a different chipset, The ASUS motherboards using chipset from Nvidia 630A instead of the Nvidia 430 chipset on the motherboard Hp used to your motherboard.

  Here is a link to the solution to the problem on the motherboard you have. I downloaded HP SoftPaq Download manager to see if I can locate the SoftPaq you need with the original BIOS 513 file. bin. I'll let you know how it goes. If I succeeded, I'll explain how I got the file you can do the same thing. You will need WinRAR to extract the BIOS file, once we find the sucker. The BIOS 514 bin file is the one who caused your problem. You must also Awdflash.exe worm 8.59E. The link located in the forumthat I hyperlinked to above.

  Update:

  I found the SoftPaq file appropriate in the HP website. You will need to follow precisely the instructions provided in the first hyperlink above. It's possible!

  Kind regards

  Eric

  Published by erico on 14/01/2009 14:12

• Desktop M8000 giving Bios Rom Checksum Error

  Hello

  My brother-in-law gave me their old tower to see if I could not going again for their children to use, the decent machine actually, he had 2 internal hard drives in it and he said it was more than ever and lock up often.

  The pc don't was not start (sitting at an empty screen) even if it had worked before, so the first thing I did was to remove the two hard drives and their hung outside for my main pc, he said, I wanted to see if they were healthy and if they had the virus on them, etc.

  Health check, past, defragmented both drives them (OMG they were horrible) and on the storage disk ran a virus scan and spyware scan (zero problems) spybot seek and destroy and completely updated avast updated etc.

  On the main C drive, I did Defrag, ran the spybot captured about 10 things mostly of cookies, nothing horrible, then ran avast, it is 17 things in temporary files, remove hit at the end of the scan, re ran the scans and it came out clean.

  Then the two drives are checked as work/healthy, defragmented, virus and spyware cleaning, put it back in the system and I still get the screen white, but maybe 1 out of 10 times I get

  BIOS Rom Checksum Error

  Detection Decivce IDE ATAPI

  Detection Decivce IDE ATAPI

  Detection Decivce IDE ATAPI

  Found the CDrom, boot from it...

  But no matter what I (F-keys, deletion etc.) I can't get the pc to answer or do anything.

  I also removed and then re-inserted the cmos battery thought he could do something to help her back running but no luck, I have a new battery to install to try it but thought to take a few minutes of waiting and re - install could lead to something.

  FTLOSM wrote: my power supply Tester digital antec today, plugged everything in and am get no flow in readings or error beeps, so I guess it's ok (nothing much wise instruction comes with it), but I have the 24-pin and 4-pin connectors in the right places here, that's what they give

  + 5V said 5.1

  + 12V1 said 11.9

  + 3.3V said 3.3

  -said 12v - 12.1

  + 12v2 said 11.8

  5VSB says 5

  PG said 350 ms

  These values of 12 volts out worrying par.2 1 tension or limits?

  The unit announces it will sound in case of errors, I get no flow in the readings or beeps, I just wanted to confirm on this.

  Cuz at this point, I checked the ram, hd, battery changed, makes the integrated reset cmos jumper option, but I don't always get anywhere then I suppose that its cpu or motherboard at this stage.

  Hello FTLOSM, reads that you list are fairly normal. A difference of one or two points on the readings should not be a problem, especially if the power supply is connected and powered. The 12 volt rails are mainly used for engines on the disks, so a small difference in the actual 12 volts would be well within tolerances. If 3.3 volts reading falls below 3 volts, then I'd be concerned.

  I would tend to think that the motherboard is the culprit, since it is rare that a processor will fail under normal circumstances.

  It usually takes a voltage spike to get a processor.

• Checksum Error at startup

  News of the computer:

  HP Pavilion Notebook PC,

  AMD Turion x 2 Ultra Dual Core Processor ZM-82 (2.2 GHz, 2 MB L2 Cache)

  Hard drive 320 GB

  4096 MB DDR2 SDRAM

  Windows Vista Edition Home Premium with Service Pack 1 - with Student Windows Package 2007

  12 lithum battery

  ---

  Question: I had the charger, the charger adapter and motherboard recently replaced under warranty and now it starts up with a black screen that says "Checksum Error press F5 to load Cmos default value press F6 to contunue"

  What does that mean?

  I noticed that my computer is a bit slow when starting and when I try to use the programs or loading anything.

  Need information more made me know!

  Thanks for your time.

  It's a problem of BIOS/motherboard.

  My advice would be to refer to the HP. something else may affect your warranty.

• CMOS-Checksum-Error-defaults-Loaded-Error

  I'm cmos-checksum-error-defaults-loaded-error what is the remedy to get it resolved?

  Please guide me in detail for him.

  The first thing to check and change if you do not already have is the CMOS BIOS battery.

  It depends on the type of PC (desktop computer/laptop) and the brand and model. Search the support site of manufacturers for your brand/model of PC for all the guides.

  However, as a rule - http://www.computerhope.com/issues/ch000239.htm no need to download anything, just read as a guide. Note the static precautions etc.

• Checksum error, impossible so start computer

  When I started my computer today, after showing the Intel screen it showed the error message

  Checksum error, default loaded

  Press F2 to continue, press F1 to access the configuration

  Then I pressed F2, start the computer, but it showed a blank screen for long. While I waited for about 30 minutes it started, neither has shown any error message. So I rebooted the system, but it is again showing me black screen only. I am not able to connect to my computer.

  I have Intel Pentium 4 CPU with Windows XP Sp3 operating system. What should I do?

  Hello

  1. have there been recent changes to the computer before the show?

  I suggest to follow the steps provided and check if it helps.

  Method 1: How to fix a computer that does not start.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  More information: Advanced Troubleshooting for General startup problems in Windows XP: http://support.microsoft.com/kb/308041

  Computer stops responding with a black screen when you start Windows XP: http://support.microsoft.com/kb/314503

  Hope this information is useful.

• 'bad checksum' error when starting

  When I rebooted my computer, today, the ordinary boot process was interrupted by a black screen with an error message that says "bad checksum" and gave me the option to start anyway, or enter the configuration.  I chose to start instead of enter the configuration.

  After I submitted this question on the forum, I restarted my computer and got this error message (I typed exactly how it appeared on my screen)

  change of service configuration
  : Disk error
  Press F2 to continue, F1 to enter setup

  .. then I pressed F2 to continue and then the message 'boot sequence error' appeared for about 0.5 sec under the previous error message above, then my computer started as if nothing had happened

  I want to know what caused this 'bad checksum' error and the sequence/boot drive error and how to solve the problem (s)

  I have 32 bit Windows Vista Home Basic w / service pack 2

  Thank you

  ehill612,
  Thank you for visiting the Microsoft Answers community forum.

  Has anything changed summer on your system recently as new hardware or software installed any new updates?

  What kind of computer you have - laptop or desktop computer and what brand and model?
  This information will help us to help you solve this problem.

  Start by checking the file system corrupted system and check the hard disk for errors.

  To run the System File Checker tool, follow these steps:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following line and press ENTER:
  sfc/scannow
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  You can help solve some computer problems and improve the performance of your computer by making sure that your hard disk has no errors.
   
  1. open the computer by clicking the Start button, click computer.
   
  2. right click on the hard drive you want to check, and then click Properties.
   
  3. click on the Tools tab and then, under check for errors, click check now.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.
   
  4. click on start.
   
  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  Note: If you select automatically errors in file system of fix for a disc that is used (for example, the partition that contains Windows), you will need to reschedule the disk check for the next time you restart your computer.

  Send us information about your system and the results of these tests.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot start my computer after the upgrade to Vista 2. checksum error. cold stops!

  FURIOUS! IS NOT EVEN THE WORD HERE! I only got my sony notebook 1 year.  I accept an update for Windows Vista 2, NOW your laptop!  Files corrupted with Checksum error.  I have not even where begin to fix this error.  It does not start.  I have NO installation disc, they do not come with computers more!   So I'm stuck using the library computer.  MAD!  How dare they not warn that a simple upgrade of service packs would lose a whole years of documents, articles and any other thing, we left.

  HOW ON EARTH I FIX THAT AND ROLL BACK TO VISTA 1?

  F2 ONLY BRINGS ME TO COMPUTER CONFIGURATIONS.

  WHAT SHOULD I DO? RUN NOW AND SPEND 100.00 TO BUY A NEW VISTA INSTALLATION? YES.  CONSUMPTION SHOULD KNOW THIS IDEA OF BANK OF WINDOWS ROLL.

  See if that helps

  How to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  Before trying again:

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  Information about Service Pack 2 for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465

  If you value your data, you need to be backup on a regular basis, what would you do if your computer has been stolen or if the hard drive suddenly gone wrong? Please don't say you lose a whole years worth of documents and articles etc. as if it was that important to you, you would have these data backups. If you don't back up your data and you lose, it's your fault.

  TaurArian [MVP] 2005-2010 - Update Services

• CMOS checksum error

  I have problem in my pc everytime I said bokt PC cmos checksum error and after loading windows with time to September 2012 and sometimes disappear the network icon and I can't access desktop but I can go through start enu and access thing when I right click on the slider office becomes blue round and I can't access desktop it keeps busy even after an hour please help me solve this problem

  Hello

  See if that helps you.

  Only check this first, but it can still be a battery CMOS/failure of default in the motherboard if the time comes back to 2012 whenever you turn on your computer after you have reset it at the right time.

  "CMOS checksum error".

  http://www.computerhope.com/issues/ch000237.htm

  If this is the CMOS battery, they are only about $5 to replace.

  How to replace a CMOS battery.

  http://www.computerhope.com/issues/ch000239.htm

  See you soon.