HP Photosmart 5520 does not accept SD card. Help

Similar Questions

• HP photosmart b110a: does not accept my password

  tried to print from the ipad, could not. printer does not accept my wpa password. Help.

  Hi @goldilocks45and welcome to the Forums of HP!  I'd be happy to help you yo configure your printer to your network so that you can print from your iPad. Is WPA type encryption, or perhaps you have WPA2? I ask about the type of encryption, because I saw a problem recently with the secret codes WPA2 which seems to be from some routers and firmware updates.

  Have you tried the printer on the network in the past, have you recently changed your password? Is your password contains special characters that maybe the printer does not? Are adjust you upper and lower case?

  I can't wait to hear back on your part!

• HP Photosmart 5520 does not detect the installed cartridges

  Hello world

  My operating system is Windows Vista

  The error message for all cartridges installed even when installation and matching color on the printer, it is "the following cartridges appear to be missing.

  This is a new printer and I never got past this stage on this printer.

  Thanks in advance

  Craig Baker

  Hello Craig,.
  
  
  
  I noticed your message on the error message you see on your Photosmart 5520. I'm not sure if you have solved your problem yet, otherwise, I would like to post a link below for you to solve this problem.
  
  
  
  If you are still having the same problem when you have completed the steps, I recommend you call HP Technical Support to inquire about a replacement printer.
  
  
  
  
  
  http://support.HP.com/us-en/document/c03262515
  
  
  
  
  
  Contact information for HP: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  
  
  
  
  Good luck

• HP Photosmart 5520 does not print in black ink.

  Black doesn't print not... except on the print quality diagnostics page where the text and black frames around boxes all print in black.  Inside of the 'Black' box is empty, however.  When I try to print a page of type, it is either totally empty or very indistinct.  How is that possible?

  I saw three other posters with this same problem, everything from 21/01/14 and no answers to the problem.  All the patches of troubleshooting on the Web page do no good.

  My warranty has expired also.  Is this a systemic problem?  How do we get fixed?
  

  Hi RAJP-52,.

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that the black is not printing on the computer but prints partially on the diagnostics page.

  I'll be happy to help you.

  I don't know what you have tried so far the fix, but I included a few documents to go through the steps to see if we can solve this problem.

  This printer has a permanent print head. You can always run however of cleanups on the print head.

  This document is intended printer does not print black ink or color ink or prints blank Pages.

  Here is a document to clean the contacts of the cartridge.

  'Cartridge problem,' 'Cartridge missing or damaged', or 'Not compatible ink cartridges' Message is displayed on the control panel.

  Please let me know the results if you are still having problems.

  You use genuine HP cartridges?
  Check the date on the cartridge to make sure that they are still in warranty. (not old stock)
  What are the ink levels?

  If you like you can print a new diagnostic test page, scan it and include it in the post, I can take a look to try to find a way to solve this problem.

  Thanks for posting on the HP Forums.
  Good day!

• Photosmart 5520 does not illuminate

  Hey,.

  After disconnecting and reconnecting the printer on the wall, it shows no signs of activity more.

  No lights are on (outside and inside the printer) and we can not turn on with the switch. It worked fine before. We tried several places where we can connect the printer, nothing has changed. We also tried a different cable, also did not work.

  It is not in sleep mode I see on the internet, it just shows no signs of life. Also it does not resemble the broken delayed or anything.

  Any help is appreciated!

  Maikel-

  Maikel Hello and welcome to the Forums of HP.

  I see that you are having feeding problems.  After reviewing the matter, it seems that you have covered most of the troubleshooting steps.  At this point, the best recommendation I could do would be to contact HP directly.  You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide.

  Thanks for posting on the HP Forums.

• HP Photosmart 5520 does not connect with computers

  I have connected my hp 5520 for the wireless, but my computer can't find it when I try to connect to it.

  The IP address of your printer has probably changed and perhaps as well password security.   I suggest you http://www.hp.com/go/toolsdiagnostics.   If the diagnosis he doesn't solve the problem then you may need to reinstall the driver.

  Another possibility would be to find the IP address of your printer (to print a Network Setup page) and enter this address in a browser window to access the embedded Web server printers.  This would at least check that the printer is visible on the network of your computers.

• HP Photosmart 5520 does not print!

  Hello

  having a little trouble here!  My printer tells me its in "error state" and custom nothing I ask it to print.  I turned it works, disconnected and re connected, downloaded diagnostic tool that says everything is cool and actually allows me to print a test page, so I know its connected.  Heck, I even tried rubbing my stomach to the right while stroking my head and running in a circle shouting banana, banana, banana (bit of a long shot that would work I know but worth it) but nothing seems to work.  Need help please!

  Bevanx

  Hello

  Thanks for the replies, but it seems to have solved the problem.  I have no idea what I was doing, maybe it was the threat to replace, but he began to print again.

  Thanks for the help

  Bevan

• Why my printer Photosmart 5520 does not fear my pages when printing duplex?

  The document print OK in printing.  But when I choose one of the options "flip" (duplex printing), it forces me to 'Print with border,' which shrinks my document and broadens my margins (1 ").  How can I get double-sided printing without altering my document?

  The only way I know to get around is to use a different printer driver. I'll link a document to the instructions below. Hope that helps.

  http://goo.GL/zCk2r

• Good afternoon. I bought a creative cloud subscription (one year) with a virtual prepaid credit card. I remembered renew two days later, but Adobe does not accept the new card. I don't know what I'm doing. Help me please

  Good afternoon. I bought a creative cloud subscription (one year) with a virtual prepaid credit card. I remembered renew two days later, but Adobe does not accept the new card. I don't know what I'm doing. Help me please

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• the system does not accept my new credit card?

  Hello

  the system does not accept my new credit card? Pls help...

  Hello

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• My MacBook Pro suddenly crashed. I lost all the programs, including InDesign CS6 I use the most. I installed a new hard disk, can't find my license number. How can I install CC? Adobe does not accept my address, no credit card no etc.

  My MacBook Pro suddenly crashed. I lost all the programs, including InDesign CS6 I use the most. I installed a new hard disk, can't find my license number. How can I install CC? Adobe does not accept my address, no credit card no etc.

  Find your http://helpx.adobe.com/x-productkb/global/find-serial-number.html serial No.

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

• I'm trying to change my credit card details, but it does not accept my new postal code (not in the U.S.)

  I'm trying to change my credit card details, but it does not accept my new postal code (new card and address are not in the United States).

  My subscription is cancelled because I can't update card details. How can I fix?

  Contact adobe support, http://www.adobe.com/support/chat/ivrchat.html

• AT300 does not accept movie files

  Hello

  I recently bought a refurbished AT300 tablet. I wanted that it mainly for I can transfer movies/series out there and watch without having WiFi.

  Can I transfer music files without problem (and they are), but when I try to transfer a movie file, an error screen appears on my phone and said that the device does not accept this type of file. I tried .avi and .mp4, and I don't see why he would not accept what they are so common...?

  I'll try to put the files on a SD card and see if the Tablet reads them from there, but it's just a little annoying. There is a lot of storage on the shelf so this isn' the question I do not think... can someone help!

  Thanks in advance!

  Why you n t install another player that can handle the format mp4 and avi?
  Game store Google provides a lot of different applications supporting these formats?

  For example the + MP4 video player for Android + (can play and MP4 files on your device browser) or + MX player +.

• Error in partition Acer Iconia B1 does not accept the update.

  My new Acer iconia b1 - a71 16 GB does not accept the OTA update in the system start menu! He accepts, and download the update. After that is give me to reboot and install. And after - installation under the start menu in the system stops

  ERROR:-invalid partition setting
  17: 238e8000:888e8000 of fat
  Instalation aborted.

  The Tablet is clean and the. I tested it without SD card inside. I even try with the original OS rom in the Acer support site - and still the same error! Can anyone describe it is hardware problem to return to the supplayer or how to fix this problem?
  Can you help me?

  A hotfix is available to resolve the error of invalid Partition. In addition, we have created a few video tutorials that will help guide you through the installation of the patch.

  Download the patch

  Iconia B1 - A71, install the USB 2.0 driver - video tutorial

  Iconia B1 - A71 error invalid when updating Android (FAST) partition - video tutorial

  Iconia B1 - A71 error invalid when updating Android (FULL) partition - video tutorial

• The remote device or resource does not accept the connection

  I have a desktop computer Windows 7 connected to my router via an ethernet cable, but when I try to go to a website on Google Chrome as Google.ca, loading the page forever without even showing the page. Finally after a long wait, it finally says that the Web page is not available. I tried to go to the Web sites by using Internet Explorer, but occurs the same result. I tried to troubleshoot the problem and it "the remote device or resource does not accept the connection" is detected, but does not set automatically. I have a wireless printer connected to my router which is online and works very well. I can even connect to my router page. But still no access to Web pages don't like my outlook.com and etc. Sometimes a go open the network and sharing Center to change the settings of the card and disable the wired ethernet only to activate it again. It works only a few times, and it's really frustrating, because it is the only computer that does not connect to the internet, even with a ethernet cable. Please find a solution as soon as possible. Thank you.

  Hello Kyle,.

  Your computer is connected to a domain network?

  If your computer is connected to a domain network, then, I suggest you follow the link below to post your query in the TechNet forums, because they have more expertise on this issue.

  Forums TechNet for Windows 7
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Otherwise, try to follow the following suggestions to solve the problem.

  "Internet Explorer cannot display the webpage" error

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  Also refer to:

  The remote device or resource does not accept the connection

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you