HP photosmart 6510: my bodyguard printer print Microsoft Windows support page and nobody asked him

Similar Questions

• Photosmart 6510 does not print in black

  My photosmart 6510 does not print in black. I presume that it was the cartridge but I replaced the cartridge and it still does not print. I cleaned the print heads and the cartridge ink levels are full.

  The printhead, cleaning of the screen failed touchscreen printer running.  But when I sat down at my computer and used the program utility printing, he did.  I ran an initial print head cleaning my computer and then clicking the button indicating that the print heads were NOT clean.  He then ran a deep cleansing process.  Then I lined up the printheads of the same print utility program.  Now it works!

• Printer Photosmart 5520 problem:, I have access to the secure page and cannot open a session

  My printer does not print in black. I followed all the instructions to fix it. I can't go down loard that assistance because it is a Vista. I get to the secure page and he asked my name and my password. I am the administrator, but it does not accept my names or passwords and blocking me. What name and password it seeks?

  Hi @arts4pat,

  Welcome to the Forums of HP Support!

  I see that you get a secure page and that you are unable to print black on your HP Photosmart 5520 e-all-in-one printer. I'd be happy to help you with this.

  I like that you get the login screen for the Built-in Web server for the printer. Is this correct? This seems to indicate that someone has put a username and password on the printer, for security reasons. If you don't know what are the connection information, the only way to remove this is to do a factory reset on the device. I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  That being said, I would like to start here. Please, try the steps in this guide, the printer prints blank Page or fact not printing black or color ink for HP Photosmart 5520 and Deskjet Ink Advantage 5520 series e-all-in-one printer.

  NOTE: This problem may be caused by problems with the ink cartridge print head or with the printer ink system.

  If you have completed all the above steps and your product still has a problem, the printer service.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to choose your
  contact options»
  Step 4. Scroll down and click on: contact HP options - click Get phone
  number
  File number and phone number are displayed.

  I hope this helps. Good luck!

• How can I print a range of pages, and exclude some of them

  How can I print a range of pages, and exclude some of them

  Will work too.

• We license from microsoft windows server 2012 and I want to install Windows server 2008. Is this possible?

  Hello

  If we have the license microsoft windows server 2012 and I want to install Windows server 2008.

  Is this possible?

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• HP Photosmart C7280: photos C7280 print sideways on the page

  When I print pictures from the iMac, they appear sideways on the page (oriented at 90 degrees on the short side of a 4 x 6 rather than the longest side).  I deleted and reinstalled the printer software.  "Flip horizontal" does not help.    Has started after the update to OS X 10.10 Yosemite (if that's the reason).

  Wireless to iMAc

  Hey @WillyB1,

  Welcome to the Forums of HP Support!

  I see that you have some problems with the orientation when printing from your Mac OS x 10.10 for the all-in-one Photosmart C7280 printer machine. I can help you with that.

  Here is how we will correct this:

  1. Close all other programs that you have open.
  2. If the USB cable is connected to the Mac, delete it.
  3. Click on your Apple icon, system preferences and printers and Scanners.
  4. Hold down the CTRL key and click on the image to your printer on the left side.
  5. Click on reset printing system.
  6. Open Applications, utility and disk utility.
  7. Click "Macintosh HD" on the left.
  8. Click on verify disk permissions. This should take about 10 minutes.
  9. Click on repair disk permissions. This should take about 10 minutes.
  10. Restart your Mac.

  Now, if you have disconnected the USB cable, plug it. Otherwise:

  1. Click the icon of your Apple preferences system, printers and Scanners.
  2. Click on the button "+" at the bottom left.
  3. Select your printer from the list.
  4. Click the check box next to and select your printer.
  5. Click on Add.

  At this point, you should be able to change the orientation of the print window. When you open the window, you should see two icons that resemble sheets of paper. By clicking on them should change the orientation. If not, please try to open your photo printing to a different program and see if the icons.

  Please let me know if this allows you to print or if you have any other questions. If not, have a great week!

  If it solves your problem, please help other users find this thread by clicking on accept Solution below my post.

  If you appreciate my help, please click on the icon below my post thumbs up.

• HP Photosmart all in one printer C7280 Windows Vista 32 bit.

  My HP Photosmart all in one printer keeps going to put in place for the printable school pictures.

  I unplugged and it always goes to the same thing when I turn it back on. How can I fix it

  This problem?

  Thank you

  ducksterman.

  Hi again,

  If it doesn't appear on your printer and not on your PC, right?  My bad... I'm in the driver settings.  Try holding down the symbol # and 3 at the same time on your printer.  This should reset the printer.  If this does not work then press the symbol # and 6 at the same time.

  Or

  To restore the default settings

  1.

  Press Setup.

  2.

  Press to select Tools, and then press OK.

  3.

  Press to select Restore Factory Defaults, then press OK.

  The default settings are restored.

  Let me know if that helps...

• Photosmart c309a will not print documents or test pages

  I have uninstall and reinstall Full Version software, twice and I still can not print documents or test pages. I use the Photosmart C309a. Can you help me

  Georgebob

  Last updated, at 01:10, estimated the printer works now. I installed the new print head, and as a first step, I have no positive results. Then I tried the printer alignment... that did the trick. The printer works now.

  Now, I wonder if it was the culprit with the old print head (alignment) maybe it's always good. I'll hold on, events, if necessary. Thanks for your help and mucho laurels.

  

  Georgebob

• The Microsoft/Windows Update errors and updates failed.

  I just had to make YET ANOTHER Destructive full restore my win Vista PC, regular and continuous errors and problems caused by who knows what and the fact that the system restore never worked once in 10 years of friggin! My PC tries to run Win' Vista (SP2) and all the new updates that are applied after SP2. I also run Norton Internet Security (fully updated). I would like to re - install Office 2007 again once more, but I'm reluctant to until I get an answer to the following problem, because whenever I have re-installed Office 2007 I get Office update errors as well. I do not yet have enough away with this recovery to even think about re - install "other apps" again. My problem is that a heck of a lot more than several updates that were 'available' over time since I bought this pc (which didn't even have SP1 on it when I bought it new), do not have more than several times. Finally, it seems that these updates failed stop appearing as 'available '. Currently failed updates are: IMPORTANT: KB974468; KB2729449; KB2742595; RECOMMENDED: Windows Live Essentails 2001. OPTIONAL: Bing Office 1.3.1. also failed (the current version is 1.3.3...).

  My concern about all these multiple failed updates is that if these updates ARE important, whereas they should, and at the very least, not failed to install the first time which must be installed with success the next time. There are at least 40 + other these updates on my pc (of all types) who failed the first time, but succeeded (according to Windows Update), the second time. After doing a search and try to install these updates above manually from the Microsoft Download Center, I got a response that these updates "are not" or "are blocked by another condition on my computer. What 'State' is probably I wonder? Makes me think anyone or whatever decide an update IS important for a particular system is wrong either (and the update is NOT important at all) and so it does not yet appear in the list of "update available", or it IS important and there is another unknown or error "NO that does NOT exist. preventing the update to be applied. I say no because maybe this unknown error also cites a number of error that is not found by the completely useless online "windows help and support!

  If an update is NOT or is no LONGER available, then why hell is he always recommended! ??? In all cases, "Windows Live Essentials 2011" settles, and looking for 'help' by selecting "get help with this error" I am taken to the "windows help and support" line (which doesn't help at all). That's because this 'aid' shows only 26 'results' and NONE of them include error numbers (800706... and two instances of 66A) city. ANY help will be VERY much appreciated (epecially on the part of MVP, who have been a great help in the past) cordially Andy Bob :) :) :) :)

  Let's start from the beginning.

  Lets first see what happened with your drive.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  change c:\bootex.log

   
  What is this file exist with something in it?
   
  The following commands query the event logs.
   
  To start verification by using the name of the source for any version of Windows (because it varies).
   

  WMIC /append:"%userprofile%\desktop\DiskEvents.html" PATH Win32_NTLogEvent where (sourcename = "Autocheck" or sourcename = 'Winlogon' or sourcename = "WinInit") get format:HForm

   
  To run chkdsk in Windows.
   

  WMIC /append:"%userprofile%\desktop\DiskEvents.html" PATH Win32_NTLogEvent where (sourcename = "Chkdsk") to / format: HForm

   
  For warnings about disk problems detected during normal operations and automatic repairs by Windows at the time where the problems were discovered.

   

  WMIC /append:"%userprofile%\desktop\DiskEvents.html" PATH Win32_NTLogEvent where (sourcename = "NTFS" or Sourcename = 'Disc') to / format: HForm

   
  Then to view the created file.
   

  Start "" "% userprofile%\desktop\DiskEvents.html"

   

  Copy and paste it here. Again run the commands again after doing the below.

  Then to test the equipment.

  Standard hardware troubleshooting
   
   
  First to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...

   

  Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.

   
  Diagnosis of memory

  If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.

   

  S.M.A.R.T
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)
   
  WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List

   

  If it is on will be true, otherwise on enable in the BIOS of the computer.

   

  Predict the failure must be False if everything is ok.

   

  In Vista and later if SMART failure predicted Windows prompts the user to run the backup.
   
  Run chkdsk

  In computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.
   
  SFC
  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  sfc/scannow
   
  Heat
  Heat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.
   
  For memory diagnostic results
  Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.

   

  Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

   
  Double-click the entry for more details on this entry.
  
  For results of Chkdsk
   
  You can ignore this if you performed the first series of commands again.
   
  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 7 and Source disk
  Look for EventID is 11 and the Source disk
  Look for EventID is 50 , and the Source is disk
  Look for EventID is 51 and Source disk
  Look for EventID is 52 and Source disk
  
  Look for EventID 55 and Source is NTFS
  Look for EventID is 130 and Source is NTFS
  Look for EventID is 134 and Source is NTFS
  Look for EventID is 137 and Source is NTFS
  Look for EventID 1001 and Source is Autochk
  Look for EventID 1001 and Source is Winlogon
  Look for EventID 1001 and Source is WinInit
  Look for EventID 1001 and Source is Chkdsk
  Look for EventID is 26212 and Source is Chkdsk
  Look for EventID 26213 and Source is Chkdsk
  
  Look for EventID 26214 and Source is Chkdsk
  Double-click the entry for more details on this entry.
   
  PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.
   
  If the results are transferred to the startup time events logs chkdsk, then the results are probably in the following file c:\Bootex.log. This file is removed when the results are placed in the event logs.
   
  For the results of the SFC
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted.

   

  To see if there

   

  findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more

   

  There are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these.

   

   

  You say that you have had continuous problems. But if you want to jump the gun to fire a bit.

   

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

   

  Windows errors (smallish numbers) and COM HRESULT values (in general, but with exceptions, start with an 8 as 0 x 80040154) are defined in WinError.h, except 8007nnnn where you are looking for the error Window number it contains.

   

  As a general rule, Windows errors are less than 65 535 (0xFFFF). Errors from 0 x 80000001 are HResults Component Object Model (COM). Errors from 0 xC0000001 NTStatus results.

   

  NTStatus errors (usually, but not always to start with a C as 0xC0000022) are defined in NTStatus.h.

   

  the .h files are the best source because it includes the symbolic name of the error that can give clues such as the source of the error
  . FormatMessage does not have the symbolic name as the description.
   
  You get these files by downloading the kit of Development Platform (that's gigabytes)
  http://www.Microsoft.com/en-US/Download/details.aspx%3Fid%3D8279&SA=U&EI=w2IrULDDLsHFmAWbmIHoBg&ved=0CBwQFjAA&USG=AFQjCNHZn9-4f2NnuN9o3UWUsOF3wL7HBQ
   
  If you just want the two files I have them on my skydrive so I can reference anywhere I want.
  https://SkyDrive.live.com/redir?RESID=E2F0CE17A268A4FA! 121
   

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  Esentutl.exe /p c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

   
   

  Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.

  Clean boot

  Click Start - all programs - Accessories - run and type

   

  msconfig
  

   

  Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.

   

  Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.

  
  Tip clean boot

  If the above does not help.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Uncheck the box just to the left.

  Reset. If this resolves your wake problem half of the items until you find the one that.

  Safe mode

  If the above does not help. Windows Update does not work in safe mode.

  Use safe mode with Networking if you need internet access.

  Click Start - all programs - Accessories - run and type
   

  msconfig
  

   
  Go to the Startup tab, and then click Start secure (also check network if necessary). Reset. Come back here and uncheck the box secure start to return to normal mode.
   
  or
   
  If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again. [Correction to start - Help and Support]
   
   

  Determine the Version of Windows Installer

  Windows Vista comes with version 4. Version 4.5 is available for download. To determine the version,

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

  msiexec

  If you have Version 4.5 try reinstalling from

  http://www.Microsoft.com/en-AU/Download/details.aspx?ID=8483

  If you have Version 4 continue with the other steps below.

  Reregister Windows install

  That you re-register Windows Installer.

  Click Start - all programs - Accessories - right click on command prompt and choose run as administrator. Type

  
  regsvr32 c:\Windows\System32\msi.dll
  regsvr32 c:\Windows\System32\msihnd.dll
  regsvr32 c:\Windows\System32\msimtf.dll
  regsvr32 c:\Windows\System32\msisip.dll

  msiexec/reg
  

   

  FixIt

  Microsoft has a range of automatic programs to solve common problems. To see Windows Installer problems

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

   

  Reinstall the Services registry entries

  Download MsiServer_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the MsiServer_Vista_32.reg.
   
  Reset
   
   

  Restart the Service and dependent services

   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator.
   

  SC start DCOMLaunch

  SC start RpcSs

  Start msiserver sc config = request

  SC start msiserver

   
   
  .
  --

• HP photosmart 6510 won't print black.

  I've done all the troubleshooting several times, still nothing.

  When I print the printer status report, there are black square brackets around each colour, but not black rectangle in black space.  I tried to copy a printout (no color) and the page is blank.  I cleaned the black cartridge screen gently with a paper towel, still nothing.  I tried 2 new black cartridges.  Printer was working fine, then that.

  I found a solution! My printer was also not print black, but I knew it wasn't a problem of ink because it was a new cartridge, I cleaned the print head with every suggestion I could find, and on the test pages it was printing black in square brackets the colored lines. It was a software problem.  Another post suggested using the drivers replacing for a paper size error. Please see the link below on how to choose replacement drivers...

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers/how-to-assign-alternate-print-drivers-in-different-versions/TD-p/1957011

  I chose HP Photosmart 3300 drivers because this printer had similar features, including wireless printing. It worked! I hope this helps!

• Photosmart 6510 e - All - In - One: Photosmart 6510 does not print black clearly

  My printer prints everything but black clearly; I put in a new cartridge and run the head cleaning nothing works. Is it possible to clean the head for black to hand? Help! I have things that I need to print!

  Thank you! It was easier and less likely to damage if I just bit the bullet and replaced it! I may need your help in the future with the HP OfficeJet Pro 8710 - stay tuned

• HP photosmart 6510 does not print black

  Printer just stopped printing black.  seems to be a major problem for these printers.  curse you HP.  Thought I did everything by going with you allows to replace my other printer.

  POINT OF SALE.  Bought the new printer.  Here's how I solved it.

• Photosmart 5520 now say 'printer offline' all the time and can not print

  I have a Photosmart 5520 which is brand new.  It was working fine and now when I try to print to it continues by saying "printer offline" and prints get stuck in QC the printer is NOT in offline mode and everything seems fine. Please HELP, I need to be able to PRINT to my printer... I use a MAC with OS 10.6.8

  I was printing to device... fine now for 3 days, going beyond the printer (as.)

  Hello djmastermurph,

  Welcome to the HP Forums! I understand your concerns with your Photosmart 5520. How is the printer connected? USB or wireless?

  Please follow this entire document of HP "Printer is off-line" Message appears on the computer and the printer will not print make sure you only choose your appropriate operating system.

  Let me know if this paper solves your problem or not.

  Impatience on your part.

• Photosmart C4180 does not print in windows 7

  I just bought a new computer with windows 7 and tried to install my photosmart C4180 printer but I have the installation cd is for windows 2000 or xp.  Is there something I can download where it will install with windows 7?

  Try this link.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-74950-2&LC=en&DLC=en&cc=us&product=1141647&lang=en

  I hope this helps

• Photosmart HP 5510 B111a-printing of Ipads, host names and more!

  Hello

  I have 5 of these photosmart printers installation in various places around our school to allow printing of the iPad 2 that have been deployed to classrooms.

  The problem is it seems to be a way to identify the different printers on the network when printing of you ipads. When I click on print and then select a printer list shows "PHOTOSMART HP 5510 B111a [C95...

  The [C95 corresponds to the first three digits of the host name of the printer, the problem is that three out of five printers have the same first three digits and are all the same displayed as the example above and therefore gives no idea of what printer you select until you print.] Which is not very practical in a school of our size!

  I connected to the HP configuration page using the IP address and changed the host name, but it changed only on windows-based hardware.

  So my question is: is it possible to change the name of the printer to allow me to determine what printer I print from an iPad? If this isn't the case, any other solution would be great.

  Hello

  You can change the identification of the unit of the printer, following embedded Web server:

  1. Access SAP from your browser by using the IP address of the printer.
  2. Enter the network tab.
  3. Enter the network.
  4. Enter Hello.
  5. Change the Name of Service Hello , as required, the updated name will appear on any Apple device.
  6. Click apply to save the changes.

  Kind regards

  Shlomi