Photosmart 6510 e - All - In - One: Photosmart 6510 does not print black clearly

My printer prints everything but black clearly; I put in a new cartridge and run the head cleaning nothing works. Is it possible to clean the head for black to hand? Help! I have things that I need to print!

Thank you! It was easier and less likely to damage if I just bit the bullet and replaced it! I may need your help in the future with the HP OfficeJet Pro 8710 - stay tuned

Tags: HP Printers

Similar Questions

  • HP photosmart 210 does not print black one color print

    I tried to replace the two times-same problem black print cartridge.

    Document here can help solve the black does not print printer Photosmart b210.  If the first four solutions do not resolve the problem of the post here can help.

  • Photosmart B8550 does not print black

    Photosmart B8550 does not black print.

    With the new black cartridge the report 'Pure Prinhead', but not when you print the actual page?

    No problem! I like to try to help out!   If you get the print head and installed and still have a problem, feel free to post back.

  • Photosmart 6515 does not print black ink after replaced the cartridge

    I am very frustrated! I can't get my Photosmart 6515 print black ink.

    Our school sends the documents by e-mail now that we have to print at home. Ideal for them, but not for me. They are usually in PDF format, so I do not have the ability to edit and change the blue color to print, either.

    I only use HP cartridges on this printer. I know it's more than a year, in order to call phone support will do no good.

    I replaced both cartridges and now it shows black ink completely full, but when I print the printer status report, black is not displayed. Black does not appear on the tool pages, either.

    I tried the command "clean printhead" several times. I unplugged and waited. I took all the cartridges. Connections look clean.

    What should I do to perform a partial reset or full?

    Hi Photokool,

    I understand that this has been a frustrating experience for you, and I want to help him.

    I will send you a private message, please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  • Photosmart 6520 does not print black.

    I use a printer wireless Photosmart 6520, no printing or copying in black. Replaced by the new cartridge and still
    Does not work.

    Hi @Mtimmer

    I see that you have trouble with your black ink.

    Please ensure that you have completed all of the steps described in the following document; Printer cannot print black ink or color ink, or prints blank Pages. Although I hope that this solves the problem, he couldn't. As you have a 6520, if the problem persists, I would suggest appellant HP support by phone even if the printer is out of warranty you may need a replacement printer. The number of call HP is 1-800-474-6836 for the Canada and the United States, or you can Contact HP worldwide.

    Please let me know if the document solves the problem, or if you called HP and the outcome of the appeal. Thank you.

  • HP DeskJet 3630 all-in-one: desjet 3630 does not print color

    Hi, I bought a new HP DeskJet 3630 series all-in-one printer today. Setting up the printer I did several tests that show color printing, however, whenever I try to print an image in color (working on my daughters school book) it prints in black and white. I did troubleshooting all I can think of, we have no black & white printing turned on. I'm not quite sure, what else to make sure the printer is brand new and should be able to print in color?
    Any help or advice would be much appreciated.

    Not quite sure what I did to make it work, di, but the cleaning cycle for the cartridges of ink & rebooted several times, and the printer is now printing normally =)

  • All-in-one HP OfficeJet 8610: All in one HP 8610 does not print right to police

    Hello

    you just bought a new HP all-in-one officejet 8610 to replace my 8600.

    I use a police - Babylon5 hollow - to print a message (like "COPY") to the text, in red (but result in black or any other color is the same).

    While my 8600 (and all my other printers) does it perfectly, the 8610 messes things.

    The lines of the police (I use the 50 size) are so thin that the text is as good as not there.

    I checked the settings of the printer, and they are substantially the same as for the 8600.

    Any ideas? I use this font for years, and I am very attached to it :-)

    Thank you

    Leo

    Hello

    It is not the solution, but I solved my problem by using another font.

    Thanks for the support,

    Leo

  • HP photosmart 5515 does not print black

    Hello

    I have the same problem as many others: my printer has stopped printing black.  The colors are ok, and I tried to what is suggested in the paper, ink levels check and evacuate on the cartridge, by running the print head clean program. Nothing has changed, no black printing or copying.

    Yhe warranty has expired.  Is there something I can do?

    Hello! Welcome to the @lauf forums.

    I read on the way to your your Photosmart 5515 is more printing in black ink. My suggestion to you, would be to read similar here to my colleague @HevnLgh on another post, and I would say following the same process that she mentions in this post: Re: light printing ink black

    I hope this helps you!

    Have a wonderful weekend

  • Want 4520 all-in-one: 4520 want does not print from internet

    The printer prints documents from Word and other programs, but NOT the internet. I checked the network printer is connected to and I am connected to this network. I checked to see if it was a driver issue I saw one when I checked the device. I downloaded it, but it has not made a difference. I do not see a network called Direct 85 HP Envy 4520 series listed in network connections options, but when I select this option, I have no internet connection, only the printer. I want to be able to be on the internet and be able to print from it. Please help, thanks.

    Hello

    Looks like you are using the direct wireless feature of your printer that allows your printer generate its own wifi signal and your laptop / PC connect directly to-cela the drawback being that it puts the signal from your laptop / PC to the printer and prevents internet access.

    The best way to print wireless while being able to use internet on your device is to connect your printer and your laptop / PC to your home wifi signal. You must disable all direct features active wireless on your printer off and connect to your wifi signal at home (not the 85 HP Envy 4520 series Direct signal).

    Pages 36 and 37 of the below user guide shows how to configure the wireless connection.

    http://h10032.www1.HP.com/CTG/manual/c04778353

  • Photosmart B110 does not print black

    Hello world

    I have a B110 phosmart for 3 years and it has worked perfectly until last week.

    All of a sudden, the black ink is not printed correctly, in other words, there were white lines in the text printed, so I thought I should replace the cartridge, and so I did. However, even with the new cartrdige, the problem persisted.

    I cleaned manally head of black ink, but it did not work. I have also run the utility several times to clean the print heads, but I did get no result.

    If initially, I got only the problem of the white lines in the black printed text, after several cleaning cartridge in the printer utility menu, I did get no black print at all.

    So I thought that the problem had to do with the set of printheads slot, so I replaced it.

    But, unfortunately, after having changed the entire site of printheads, I can't always print in black.

    I normally got the other characters of colour, but not black.

    What could be the reason?

    Please note that I already read all the pages on the standard resolution (http://support.hp.com/us-en/document/c02046460).

    Thank you for your help,

    Bruno

    Solved! I am even more convinced of obsolescence are scheduled for my printer.

    I solved my problem and you know how?

    I have "dupe" of my printer.

    The print heads are in good condition (I bought new print heads) and I had already perfectly cleaned up the chip in the printer. So why not print?

    Whenever I changed the entire site of printheads, printer makes a procedure of 'mysterious' duration of 4 minutes.

    After changing several times the new and the old sites of print head, printer has started printing black ink, again initially lightly, then normally.

    So, what happened? As I said the printer was quite in the right order, the inks were original and I had followed any other procedure.

  • Premium photosmart HP does not print black

    I replaced all ink cartridges. Makes 3 automatic print head cleaning. Some manual cleaning of the internal left side and print head cartridge. After all that black did not improve, it is a very pale grey. A print of the photo has no definition in all colors. The Canada geese have blue/grey neck when the true color is black.

    Yes, I tried to soak the head print, but WITHOUT success.  I spent almost 2 hours with a HP technician on the phone again through all the testing process.  The result was this 3 year old printer in the trash.  The tech (Joy) was 'extremely' helpful and plesent to work with.  She gave me answers to all my questions on a future purchase.

    I'm done with this question - the printer is trashed.

  • MacBook / J4580 All in One / software Parallels - does not PRINT - HELP Please

    I'm going to lose my job in real estate - I have a Macbook - when I'm on the side of Mac - the printer works - and print.  However, when I'm in Parallels - it does not recognize - only get the message "printer error".  Real estate agency associated with the elements run only windows - so I spend a lot of time in the analogies.  Our it guy at the office said to make sure I have install the CD on the side, parallels - but this doesn't work either.  Called the Apple Support - they could not answer for Parallels - cost of Parallels for their support - so I will try this forum first, before I have to pay to see if anyone else has encountered this.  Thank you!

    This can be a Parallels in question, but let's get XP work just before mess us with Paralalls:

    Verify that you can access the web page internal to the printer by its IP address.

    1. click on the 'Start' button--> printers and fax machines.
    2. under print jobs, click on "add a printer".
    3. click on 'Next' on the Add Printer Wizard window.
    4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click on 'Next' and follow the instructions.
    5. now, select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".

    6. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
    7. Add the name of print spooler, and then click "next".
    8. click on "next".
    9. click on "Next" and "Finish."

  • HP Photosmart C4200 all - in-one series. Does not print because the undetected alignment page.

    Does not print not because Error Message "alignment Page not detected."  Thanks Chaso

    can someone reply to my message number 5, thank you. Chaso.

  • HP photosmart 6510 does not print black

    Printer just stopped printing black.  seems to be a major problem for these printers.  curse you HP.  Thought I did everything by going with you allows to replace my other printer.

    POINT OF SALE.  Bought the new printer.  Here's how I solved it.

  • Photosmart 5512 does not print black

    I read the suggestions of what to do if you have print heads could remove that do suggest you for the 5512. I did the reboot and used the "clean printhead" on the printer several times. Still no black, other colors are fine. It was working fine until I replaced all cartridges. I did not remove the old cartridges until I put new in. Help would be appreciated.

    Ciara,

    Thanks a lot for your interest and help.  I think my problem is resolved.  I ran the tool "to clean the print heads" three times and started to see results. After that it runs three other times the printer seems to work well.  Of course now I used all my color ink cartridges new, but at least I don't have to buy a new printer!  Thanks again.

Maybe you are looking for