HP PhotoSmart b110a stops at halfway printing

Similar Questions

• Photosmart B110A black does not print

  Hi, I have a photosmart B110A and black stopped printing.  Was working fine before this problem.

  A lot of ink but I have replace the cartridge with a new one and same problem.  A ran all alignment head cleaning tests, etc. Reinstall the cartridge.  Clean the vent on the top of the cartridge.  Powered on.  Still nothing.

  Is there a solution to this problem?

  Hi Ciara

  Thank you very much, this seems to have solved the problem.  Although I have consumed a lot of ink there are now no remains in the cartridges that I will need to replace before I can be 100%

  Thanks again

• printers HP 7610 stops at halfway printing or returns error on win8.1 (wireless configuration)

  Help please...  Just got the printer large format 7610 a few days ago and installed everything fine on win8.1 from the CD and select the wireless option.

  All right, except if I try to print one full photo page, or something other than a small photo or a document.  The printer stops printing before it's over or a useless error message on the screen saying "printing error on HP Officejet 7610 Series (network).  With no other info.

  Sometimes the picture full page prints completely, but after a delay of 10 seconds, the error message appears on the computer.  It's as if the computer has not received a "finished printing" status message of the printer.  Maybe after a time-out period, it displays the message, assuming that there is an error with printing.  Basically, the handshake seems wrong.

  I tried to print from several programs, such as Picasa and Irfanview.  I disabled my anti-virus software too.  I enabled the discovery of the public and private network and printer and file sharing too.

  But... If I go to control panel > printers and peripherals > and select "add a printer".  And add another printer 7610 (which only allows you to select the driver "7610 series class driver"), this second printer (with the "class driver") will not get the error.  However, this printer has all the options of paper and some other features of the 7610 printer selection.  This second printer uses a "TCP/IP Port", not a "WSD" port as the (network) install uses.  So the question is somewhere with WSD port / protocol services device, which uses the installation of the HP printer on the CD of the web site.

  7610 (wireless network - using the WSD port) printer driver seems to have a major problem.  Help, please.  I can't print the large 13 x 19 even images I got this printer, since it will not be printed a large full photo.  The wireless communication protocol or the Protocol seems terribly flawed.  I use 802.11 WPA - PSK with high quality signal (first level 5).

  Thanks for any immediate help or clues.  I went through all the normal stuff.  verified that all software are up-to-date.  There is no firmware downloads available, the firmware in the printer is the most recent.  powered and on all 3 devices (printer, router, pc).

  ... Edit... The only solution I came with is go to control panel > display devices and printers > right click on the printer, select the printer properties > Ports tab and change the "WSD" port to one of the unused ports "TCP/IP".  This causes a second printer to add to the list of printers.  In this way, I have media and the paper size options.  But I'm afraid I've lost all the features that come with using WSD port peripheral, such as scanning, web services etc..

  It is the only solution to this problem that worked for me. Why it has not been resolved by HP after all this time I'll never know.

  http://troubleshooting201.rssing.com/browser.php?indx=14839819 & Item = 2327

  More specifically - that part of the above page, it is what solves the problem-
  
  Find out what IP address, is that your printer uses.
  Go to control panel, then click "View devices and printers."
  Look for your printer right click.
  Click on "Printer properties" and a new screen opens.
  Along the top, you will see some tabs. Click on the one that says "Ports".
  Click on 'Add Port '.
  Highlight "Standard TCP/IP Port" by clicking on it, then click "New Port". A new screen opens.
  Click "next".
  Type the IP address of your printer, and then click "next".
  Your computer should find your printer.
  Click 'Apply' and your printer should work fine.

• OfficeJet 4500 stops at halfway printing Windows 7

  Hello

  My Officejet 4500 G510g-m Wired is on a home network with 4 PCs. Two PC run SP3 of XP and have no problem printing. The other two are running Win 7 (a 32-bit and the other 64 bit). Spare no effort to print from Win 7 ends with half a printed page, an error message short on the screen of the device "Printing cancelled" and one error in the window manager queue print "Error." - sent to the printer

  The problem occurs when you print from applications (Office, PDF). The drivers are up to date. Used to be OK. Cannot identify when the problem started.

  Help, please.

  I downloaded and run utility diagnosis HP printer on both PC problem and found facilities double and triple the printer (no idea how it happened). After a complete disassembly, there included manual removal keys in the registry and a complete installation from scratch - everything works perfectly now.

• HP photosmart B110a: change in router, need to change the IP Address of the printer.

  I have a HP photosmart B110a and Windows vista.

  Previous using of my router, I put a static IP address.

  Now, I have a new router and I can not change the IP address of the printer.

  I've already tried

  Factory reset the printer (IP address does not change)

  Turn off/on router/Printer PC

  Type IP address of the printer to the current address in the browser (the page does not exist)

  Connection USB and USB current running to the wireless program that generated the following message "the PC and the printer are connected to different networks (192.168.1.0 and 192.168.0.0).  They must be connected to the same network.

  My Network Setup page shows that I am connected to the identifier SSID is correct

  IP 192.168.0.19

  Subnet mask 255.255.255.0

  Default gateway 192.168.0.1

  Really need help, thanks, George

  Run the wizard from the front panel wireless configuration, then set it to DHCP Auto IP printer.

• HP Photosmart B110a: HP Photosmart B110a cannot print via wifi after upgraded to windows 10 notebook

  Before I updated to windows 10,

  I can print via wifi.

  But now I can't.

  the error says that there is some connection problems.

  But I could not understand what is wrong.

  We need to make a configuration under windows 10?

  Thank you

  Hi ma1210,

  Given that this problem occurred after the upgrade to Windows 10 I think your best option would be to uninstall the printer driver and reinstall Windows 10 drivers for the printer. You can download Windows 10 drivers for this printer by going to HP support at www.support.hp.com site - then enter your product information IE HP Photosmart B110a... change the Windows 10 operating system, download the driver and install it. According to me, which should solve the problem. All the best...

• Want 4500: Stops at halfway through the printing pages

  Whenever I try and print something, it stops at halfway through a page (could be first or after) and say that it can not print the page. Practically, I can't use the printer I'm just wasting a lot of time and a lot of money on ink. Want to throw it out the window but I don't got it about a month or two. Help, please!

  Hello
  This can happen when printing over the network due to a problem with the operating system while performing a print job using the WSD Protocol, which is the default protocol used by the operating system.

  Microsoft has released a patch that should answer this question.

  Install the hotfix below and check differences:
  http://support.Microsoft.com/kb/3000461/en-us

  If the problem persists, be sure to specify how the printer is connected to your PC.

  Please let me know if that helps get the problem resolved.

  Concerning
  Shlomi

• HP Photosmart B110a - poor print quality

  Hello

  I have a HP Photosmart B110a CN245B and I use Mac OS X Lion version 10.7.2.

  I bought this HP Photosmart camera in the month of August, I changed the black cartridge once and it worked well. But now, replacing the black cartridge for the second time, I had a few problems. Printing is faded, I can barely read what is written on the page, even if I chose 'Grayscale - black print cartridge only' and 'Best quality'... the print quality is very bad. What can I do?

  Thank you very much!

  I think that the printhead has failed.  It should be under warranty.  Here's how to contact HP technical support: www.hp.com/go/totalcare

• Photosmart B110a does not print another property

  I replaced the cartridges of color with authentic products on my Photosmart B110a.  Until then it worked perfectly.  Now it prints shocking images of color in pastels.  Does not print black which is 3/4 full.  I use a Mac.  I powered by printing, computer, uninstalled and reinstalled and still no luck.

  Test pages print works and the colors appear.  I cleaned the print heads.  I have re-aligned heads too.  Help, please!

  Hi Deelesley, don't know what fixed it but glad to hear it of good feeling back for you.

  FYI, if you have problems again the link below has a lot of support documents & troubleshooting for PS b110a

  http://h10025.www1.HP.com/ewfrf/wc/product?product=4022343&CC=IE&DLC=en&LC=en&product=4022343&tmp_track_link=ot_search

  Ciara

• have photosmart b110a and after the update, it will not print or scan to my office

  have recently bought photosmart b110a and connected wireless for desktop (windows xp) and laptop (windows 7), but after an update is, it prints from the desktop - have deleted the software but left driver installed to try to remedy the situation and made the restoration of the system

  Hi there caleso,

  This is probably a software bug somewhere lets try to download and print and scan running doctor located here:
  http://support.HP.com/us-en/document/c03275041

  It can fix its own much and if not to give a better idea of what is happening.

  Good luck!

• Multifunction HP B110a stops working after update from Hp

  I have the all-in-one HP Photosmart B110a, who stops working after applying "HP updates notification". Impossible to print or access HP Solution Center (nothing works). Only solution is to use the installation CD to completely uninstall the HP software & then reinstall. I always prefer to bring software up-to-date, but never for this B110a.

  Member of the family with the same B110a also had this problem today after inadvertently update, so I fixed as mentioned above.

  A lot of your time. Could someone inform me why this happens & there at - it solution. BTW I stopped (as useful as an ashtray on a motorbike) updates

  Concerning

  Thank you Gemini02, not sure what you mean by "go through the HP software. I can find the IP address in the box at tools of the HP Solution Center/printer normally, but after applying the updates, I am unable to access the HP Center solution so I wouldn't be able to change the settings. In any case, I don't want to apply updates in the future.

  Kind regards

• all-in-one photosmart B110a: windows 10 and b110a

  I had my B110 series all in one printer works fine for over a year, then I updated to Windows 10 and he stopped scanning. So I tried to remove and reinstall all the HP programs, tried to hook up with cable (as well as wireless), tried Hp trouble shooters and doctors and no matter what I do, the printer setup will crash towards the end of the process and say "fatal error" and "MSI.netdevicemanager40". Someone please help.

  Hello @Jenecessary,

  Welcome to the Forums of HP Support! I see that you have recently upgraded to Windows 10 operating system and you stumbled upon a matter of scanning with your HP Photosmart B110a. You have uninstalled the software, now, when you try to reinstall the printer, you get a MSI error message.

  Please, try disabling your firewall and running the installation to see if it allows you to install, if this does not work try a clean boot and re run the HP printer install wizard for Windows , it was created to help Windows 7, Windows 8, Windows 8.1 and 10 users to download and install the latest and most appropriate HP software solution for their HP printer.

  If you still run into installation errors, continue here: a "Fatal Error" (error MSI) is displayed on the computer while installing the HP Windows software

  Please let me know the results, I'll watch for your reply.

  Thank you

• Photosmart B110a - Wireless Setup Assistant starts whenever it is turned on

  Hi all

  I just spent half a day to set up my new printer wireless HP Photosmart B110a. (CN245B)

  He luckily easy, but ultimately all the software is installed on two computers and printer is wireless connected to the router on my home network. Printing, ePrint, scanning everything works fine.

  With the exception of this problem: I turned off the printer using the power and she handed over after 10 minutes. I've done several times, and when turned on, every time the printer wonder if I want to configure the wireless connection. If I click on Yes, then he begins the wizzard - wireless and the password must be entered again etc. If I click on no, then the printer just starts and runs very well. It seems that he does not lose the connection settings.

  Whenever I turn on the printer with the button, it is from the wireless configuration wizard. Is this a bug?

  How can it be solved?

  Thank you

  Smartyx.

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address). If you don't know it, enter the current IP address.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP address of the router to the bridge and the first DNS entry.  Let the second white.

  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Photosmart B110a Wifi Macbook Pro Scan fails after the most recent firmware update: CHL1FN1146AR

  Hi all

  I currently have a problem when scanning on wifi using a Macbook pro (Mac OS X 10.7.3).)

  Printer/scanner/copier is a: HP Photosmart B110a model: CN245B

  Service ID is: 20348

  The driver version is: HP ink Jet 8 pilot 3.5.2

  I used to scan directly into Evernote after completing the following steps:

  System Preferences - print & Scan - Scan - Scanner-open

  At this point the printer stops responding (just the apple turning and turning circle)

  The utility shows HP status: 'Idle '. The serialnumber Sevice ID and model are shown as well.

  Reset the system of printing and reinstalling the driver unfortunately did not solve the problem.

  Even the HP utility informs me that "an error has occurred."

  I tried to press the button 'wifi' on the printer for several seconds to make my router was able to connect to the printer.

  It seemed to work. I can print to the printer, once... grmmph... After successful printing I launched a scan...

  Too bad...

  The message:

  "The scanner reported an error.

  The scan did not complete because the operation was canceled while the analysis was underway. »

  pop up.

  Power - off at least 60 seconds does not resolve the issue.

  This behavior has started to happen right around the time that I installed an update of the firmware on the device.

  The current Firmware version is: CHL1FN1146AR

  I can reach the printer using a Web browser, the printer is showing the status of 'connection '.

  The webscan works like a charm and the self test page print works as well.

  If the printer is in my humble OPINION.

  Please let me know if this sounds familiar to anyone. Maybe a restore to the previous firmware could solve my problem?

  Best regards

  Martijn Krop.

  PS: My router is a

  TP-Link WR1043ND Original newest Firmware. The protocol used is WPA - PSK (automatic encryption)

  Hi Martin,

  First of all, try to reboot the router?

  I always suspect the router.

  Even further because it seems not to support Hello based on the above document, the manual of the router and the router configuration that I went through with no opportunity to locate any indication for its support.

  Please try temporary without going through the router and check the differences:

  1. On the product control panel, tap the Setup icon ( ).

• Photosmart B110a: eprint problems after Windows upgrade 10

  The printer lives in my office, plugged into a Mac.  My laptop connects wireless to it.  You use Windows 7, the laptop could connect to it as a network printer via the Mac, which required that the Mac be turned on, or directly using eprint, requiring only the printer.  After upgrading to Windows 10 I re-installed the printer as a network printer and everything's fine but eprint does not at all.  I downloaded the latest version and I get a 'eprint + Jetadvantage' device in my list of installed printers, but if I select to print anything it either nothing happens.  The call to the top properties of the printer shows an error message saying "eprint driver is not installed on this computer.  You want to install it now? ».  This leads to a "pilot Add Printer Wizard" which lists a driver of HP eprint.  Try to install this product a message that I am about to add the following driver "HP ePrint, x 86, Type 3 - User Mode" but nothing seems to happen and I still get the missing pilot error.  I uninstalled and reinstalled several times without success.  I ran the HP Scan doctor and print, but it can't even connect to the eprint printer.

  Any notice received with gratitude.

  Hello @Ticfan,

  Welcome to the HP support forums.

  I understand that after upgrading to Windows 10 that you can no longer use the driver ePrint.

  The first thing I want to address is the "ePrint + Jetadvantage".

  It is not the driver ePrint have you need or want. I will not go into too many details about it, but it's a commercial product and the Photosmart B110a is not supported. It would be best to uninstall this piece of software.

  The following link will take you to the correct driver.

  You can select 64 or 32 bits depending on your operating system.

  HP ePrint Software

  I'm curious about something. How is the printer is not on a local network with other devices? How is it, you chose to go through the Mac? Why not have the printer on Wifi and having the laptop connect without having to go through the Mac? Maybe I'm missing a part of the installation, but this seems more complicated then it must be.