No audio, cd/dvd devices does not work, can not update via Microsoft Update, usb memory sticks not recognized and much more

Similar Questions

• My CD/DVD drive does not read and is therefore no longer is visible on my computer, the BIOS or Device Manager.

  I just realized when inserting a CD, he has not read. I havn't he used in awhile, so it can't just happen. When I insert the CD you can hear it spin and green light flashes, but after about 10-15 seconds it stops and the light goes out. Under 'My Computer', I see more player. I don't see the driver CD/DVD option in my Device Manager menu longer, and I do not see it in the BIOS. I have a HP Pavilion Labtop.

  Any ideas? Thank you!!

  Hello

  Check with HP, their drivers support and documentation online and ask in the forums of HP for known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Since it is not recognized in the BIOS, which means that the reader could have failed, there is a possible cable or
  problem of controller or other hardware problems.

  ===================================

  If you can get it to be recognized in the BIOS and it still doesn't work, maybe these will help.

  You might have a disk problem as the CD/DVD is actually 4 discs in 1 case (CD & DVD and CD burn and)
  DVD playback). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps. Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite L30 VISTA - DVD player does not empty and clean recorded DVD

  DVD - RW 4 x discs ignored. When I try to 'burn' of ULead DVD Movie Factory or play a previously "burned" DVD made on my old model Qosmio, the DVD tray opens (with the disk in it) and with the message "Please insert disc". If the tray closes with the same disc always in it, it does exactly the same thing again.

  Product Commercilly DVD is most recognized and played. This problem exists since the laptop was purchased. Would appreciate any help.

  If this problem existed on the first day, why did you wait so long and not tried to resolve as soon as possible?

  I recommend you to install the Nero trial version and check the functionality of engraving. Try please to create CDs or DVDs burning data or maybe some movies on DVD. Test these media. If you report about the same so I can believe that there is a serious problem.

  One last thing. Try to start with recovery media. Please let me know if the recovery procedure starts correctly.

• Portege 400: CD/DVD-ROM does not recognize the CD more

  Hello

  I have a portege 4000 with a CD/DVD-ROM SD-C2502 drive.
  It accepts allright DVD but can't read CD (both data and music) more. The error message indicates the data format is not supported by windows, or there is a formatting error. Things has been OK until I recently installed PowerDVD on my PC.
  I uninstalled PowerDVD, but nothing has changed. What can I do?

  see you soon
  Ernst

  Hello

  1, you can set the default BIOS with BIOS loading and the Home key settings!

  2, check if, www.toshiba-europe.com/storage, an update of the firmware of your player is available!
  And then try to do, maybe it will help!

  Otherwise, I think your drive is broken and the failure can only be fixed with a replacement!
  Sorry!

• WSD Print device does not have a driver

  Help!  I have a new Pavilion of HP with Windows 7 Professional 64-bit Edition.  I'm trying to install a HP Officejet 4500 printer via a wireless router.  The computer detects the printer, but then gives me the error under Troubleshooting in devices and printers that the WSD print device does not pilot and therefore will not be installed.  There are other the home computers running Windows 7 that are able to connect and print.  Unfortunately, my son lost the printer installation cd so I downloaded the drivers on the internet and still get the above message. I tried even to connect the printer directly to the laptop and the laptop does not show even a usb connection.  I have completely restarted (with assistance from HP Support) the new operating system for laptop to factory settings and still am exp eriencing the same problems.

  Can I go to a friends house and the laptop will detect and install this printer with absolutely no problem... What should I do?

  Hello leo.choo,

  These are the drivers that are available for the HP OfficeJet 4500 printer.

  I see that there are two models of printers. I don't know which version you have printer HP Officejet 4500 G510g all-in-one or the 4500 G510n all-in-one HP Officejet printer. There are separate drivers for every model.

  I suggest you follow the link below, enter your model number to download the drivers for Officejet 4500 Wireless printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=3986399

  You can follow the link below to run, download and run the utility:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02114788&cc=us&LC=en&DLC=en&product=3986399&tmp_track_link=ot_search

  Or alternatively, you can download the drivers for the Windows 7 computer that works on another computer and use a thumb driver to copy on their computer and install it.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Help! WSD Print device does not have a driver

  Help, please! I have a Dell Inspiron N7110 with Windows 7 Home prem oa that I try to install an epson stylus nx420 printer via a wireless router.  The computer detects the printer, but then gives me the error under Troubleshooting in devices and printers that the WSD print device does not pilot and therefore will not be installed.  .  Unfortunately, my mother lost the printer installation cd so I downloaded the drivers on the internet and still get the above message. I tried even to connect the printer directly to the laptop and the laptop does not show even a usb connection.  I completely rebooted (with assistance from HP Support) the new operating system for laptop to factory settings and still exp the same problems... What should I do?

  Hey Elena,

  Until we provide troubleshooting steps, we would like to know as a result of information from you.

  (1) what is the exact full error message you get when installing the unit?

  (2) have you installed the driver from the manufacturer's website?

  (3) your computer is capable of detecting other connected USB devices?

  You might face this question when the driver installed is not original or if it is not installed correctly. Follow the troubleshooting methods listed below to solve the problem.

  Method 1: Install the printer drivers from the link below, then check the issue. Select the appropriate operating system.

  All-in-one printer, Epson Stylus NX420

  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=151211&prodoid=63087959&infoType=downloads&platform=all

  Method 2: Follow the steps in the link below.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the link given below for assistance.

  Share a printer

  http://Windows.Microsoft.com/en-in/Windows7/share-a-printer

  Feel free to write us if you are still experiencing a problem. We will help you to come.

• Satellite L300-19F and WXP - audio device does not work

  Hello

  I installed Windows XP Home edition on my Satellite L300-19f after change SATA compatibility I installed Windows XP Home edition and installed all the drivers and everything's fine, but the audio device does not work. I downloaded the driver from DOWNLOAD & support center, but he can not detect.

  BTW: he used to work on Vista.
  What should I do?
  And thank you

  -Download driver audio Realtek HD Realtek page.
  -Go to the Device Manager
  -Remove the sound card.
  -Remove the High definition Audio Controller
  -Restart the laptop.
  -Reinstall the Realtek HD audio driver

• Satellite U400-17R - audio device does not work after installing XP

  Hello

  I bought a model U400-17R with Vista Home. I formatted and installed Windows XP Professional download drivers XP Toshiba site.

  Everything works, but my Sound Device does not work. When I check in the Manager of devices the Sound Drivers are there and it says working properly.

  I'm lost... Can someone please help?

  Hello

  I think you have the same problem like me a few months ago.
  I installed Win XP SP2

  The t is not his work because I didn't install the patches MS; KB835221 & KB888111

  The patches must be installed as a first step, before the audio driver is installed.
  If you have already installed the audio driver, then you must remove (uninstall) before install you the patches Ms.

  PS: The MS patches are part of the SP3

• HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work code 32

  HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work Code 32

  The other post:

  HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work, another driver can provide this functionality. (Code 32)

  Hello

  1 are there any changes or updates made on the computer?

  2. when exactly you get the error message?

  Code 32: a driver (service) for this device has been disabled. Another driver can provide this functionality.

  I suggest to return the item and try to run the fix it and check if it helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Let us know if it helps.

• CD/dvd drive does not work - it is recognized when the computer starts, and it is listed in the Device Manager?

  I am running Vista Home Premium on a laptop Compaq Presario F700. It is listed in the list of computers of readers, it is listed in Device Manager. The lites drive that the computer boots so I know it is detected. When you run itunes or media player the player does not open. When I push the drive button it will not open. It opens with a paperclip in the exit hole. It cannot read a CD or a DVD. None of the media players even recognize there is a disc in the drive. I tried to run fixit, but it would not drive either. I tried restoring from a previous backup, without change.

  Hello

  Check / settings (BIOS/CMOS) often F2 so watch the screen as it starts - place CD/DVD
  1st in the boot order (remember to put it at the time where the fact).

  Then put in a DVD to boot Windows and see if the driver works.

  If it doesn't then it's a hardware problem.

  =======================================

  If the drive has worked in the test above, that these can help:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My DVD player does not work and all the information I can find is "this device does not work correctly.

  Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".

  I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.

  I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
  entries that do not fix the resolution of problems and those who "could" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
  There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
  Parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite A500 and Win8 - DVD player does not work

  I upgraded my Satellite A500-17 X to Windows 8, but now my DVD drive does not work.

  Anyone know how I can get it working again.
  Thank you.
  Cumbria

  Solution here:
  http://www.CSD.Toshiba.com/cgi-bin/t...e&soID=3516888

  * Uninstall Toshiba programs: *.
  • TOSHIBA Recovery Media Creator
  • TOSHIBA Disc Creator
  Then restart your PC using the power--> reboot option in Windows 8.
  Your CD/DVD should be available now.
  To help uninstall these programs, follow the instructions below

  * To uninstall a program or application: *.
  1. on the home screen, type Control Panel
  2. select Programs--> uninstall a program
  3. find two programs listed above and uninstall these applications
  4. once the application programs are uninstalled, restart your computer using the power--> reboot option in Windows 8
  5. when the power to the computer on the CD/DVD drive should be available
  If the CD/DVD drive still does not appear, follow the instructions below to uninstall a device driver

  * To uninstall a device driver: *.
  1. on the home screen, type Device Manager
  2. Select Device Manager > CD-ROM/DVD-ROM drives > right click on the displayed device > select uninstall.
  3. once the driver uninstall, shut down your computer by using the method of restart. The driver will be installed automatically when the computer restarts.
  4. the CD/DVD drive should now be shown.

• Satellite P105 carpet * a dvd player does not work with Win 7

  Greetings,

  I need an upgrade on my dvd to my vintage Satellite P105.
  I want the possible fastest dvd burner right now because I'm a fan of film and keep them in digital memory.

  (1) first should I get an external drive or can I get the best performance with an internal dvd replacement of a reseller of parts or Toshiba?

  The problem is when I've upgraded to windows 7 things have changed. I lost my sound, but that solved using a driver inherited Visa as apparently the sound 'Council' on the laptop is for Vista only. Then I found the dvd player which is a mitsu * an internal UJ-450 does not or is extremely slow in saving films, records or files. The available recording software seems also planned for Vista performance was acceptable. Even the dvd burning software does not work.

  (2) so my question for multimedia specialists is: what should be my next move?

  (3) should I go outside and confront the neck of the bottle USB or

  (4) to make the speed of the bus on the internal dvd?

  (5) given an internal dvd is preferable, because it's exactly a dvd-ram/IDE as it is currently, or some other configuration of bus.

  (6) most importantly, what dvd burner would give me 18 x speed with current programs like ConvertXtoDVD and did as a symbol external or - better - as an internal dvd replacement or my slow drive currently?

  Of course, if you could give me a model number and direct me to the sales it would be much appreciated.

  Thank you in advance.

  Rachel_1

  > 1) first of all I should go for an external drive or can I get optimal performance with a dvd replacement internal to a coin dealer or Toshiba?

  You should know that not all internal STRANGE machines are compatible. You will need to use a not compatible and supported and such device could be ordered in a local ASP.
  But it s more expensive as an external CD/DVD device so you could also choose an external that would be compatible with all computers and laptops available.

  (> 2) so, my question for multimedia specialists is: what should be my next move?
  As mentioned. Good option would be to buy an external burner drive ODD

  (> 3) should I go outside and confront the neck of the bottle USB or
  External device are compatible with all computers and are less expensive

  (> 4) go to the speed of the bus on the internal dvd?
  If you have the money for an internal device and want to use it with P105 only then you can also choose an internal burner.

  (> 5) because a dvd internal is preferable, because it is exactly a dvd-ram/IDE as it is currently, or some other configuration of bus.
  As far as I know it s an IDE interface, but the device would support setting master or slave or c - salt. As mentioned, you can buy a Toshiba a recommended.

  (> 6) especially, what dvd burner would give me 18 x speed with current programs like ConvertXtoDVD and did as a symbol external or - better - as an internal dvd replacement or my slow drive currently?
  Point 5 of the air)

• Mat * one years (uj-840) DVD player does not work properly

  The Mat * one years (uj-840) DVD player does not work properly.
  A symptom of the problem is that the icon does not appear in 'my computer '.
  more and she does not recognize the CD.

  I went to the properties of the drive through Device Manager and saw the following message is displayed:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
  Click Troubleshoot to start the troubleshooter for this device. »

  Following the instruction of the troubleshooter, I tried to update my driver through
  Device Manager, but it tells me that the current driver is the more up-to-date version.
  In the properties of the drive, I found that my driver version is: 5.1.2535.0

  What is a simple problem that has a solution?
  I don't see other actions to find the root of the problem.

  Thank you

  I hope this article can help you - http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm
  Check it out!

• Satellite L500 - 1CQ PSLS0E - CD/DVD drive does not work - driver problem?

  Hello

  My DVD player does not work.

  There is power to it. The engine turns when I eject and reinsert. Troubleshooting Control Panel for the equipment and devices said it is a driver problem, but cannot fix it. Problem with the driver.

  I reinstalled it from the Toshiba site.
  It records in the right place?
  I am Windows 7 64 bit and chose the right driver for it.

  Should I use the 64-bit?
  I have 3 MB of RAM which was the spec when bought.

  If I wanted to change to 32 bit how you take you without the CD/DVD drive?
  Is there any point in doing this?

  Thank you

  Richard

  Hello

  To be honest I m a bit confused.
  You are not able to boot from THE disks; Windows disk, disk recovery, disk Linux?

  If it of the case, then it means that your CD/DVD drive is faulty.
  Why? Because the CD/DVD drive is recognized and controlled by the BIOS when booting from CD or DVD.

  When the Windows operating system has started, the CD/DVD drive must use the Microsoft common driver which is part of the Windows operating system.
  This means that you n t need to install ALL the drivers in order to get the job of CD/DVD.

  If you can boot from any disk, but if the CD/DVD drive is not recognized by MY computer, then I recommend this:
  http://support.Microsoft.com/kb/270008/en-us

  Before you remove the upper and lower registry filters, remove the CD/DVD drive in Device Manager and then go into the registry and remove the filters. Restart the unit.

  Good luck