HP Photosmart C4440: change ink cartridges

Similar Questions

• Change ink cartridges CN216A Photosmart Plus B210

  Ink cartridges carriage does not come to the center when I lift the cover if I put in new cartridges.

  However, the fact printer print and copy, for transport of cartridge works for printing.  Help!

  Hello Shorty944and welcome to the Forums of HP!

  I see that you have issues with your transport movement, but only when changing cartridges. I would like to help with that today.

  I suggest you perform a power reset. Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  "I suggest also running through the steps described in this document on 'traffic Jam' or ' 0X610000F6" Message appears on the control panel, just in case there is a problem with the transport catch or delaying its movement.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Photosmart 7520e: black ink cartridge doesn't work on Photosmart 7520e

  Black ink cartridge stopped working.  I replaced the cartridge with a new cartridge, HP 564 XL.  Used printer clean print head and Align tools.  Received message 'alignment failed.  Cartiridges are defined for quality parameters' the printer is off guaranteed so no help from HP.  Does anyone have any suggestions as to what to do?

  Hi @aquaharry,

  Welcome to the Forums of HP Support! I see that you have recently changed the black cartridge on your HP Photosmart 7520 and now you cannot print. You get a "alignment failed.  Cartridges are defined for quality parameters "."

  I wish you continue troubleshooting here: color or black ink not print

  Complete all of THE steps and make sure that the cartridges are properly ventilated.

  What are the results, you are FTA now to complete a successful harmonization?

  This is a great question other clients may also wonder; Please click the "accept as Solution" if you think that this message has helped you, or could help others. You can easily say 'Thank you' by pressing the "Thumbs up" icon.

• Photosmart 5520 black ink cartridge not working not

  I have the same problemwith Photosmart 5520, black ink, it's not working

  A few hours ago, I bought a new cartridge. Because the return, we were out of ink and... I changed (for the second time since I bought the printer) and after that... the printer does not print black ink more.  I bought the printer at ElGiganten, Copenhagen, Denmark. I wasn't expecting to find unwanted product on the market, the Danmark. I wasn't expecting HP to deceive people so much. I checked here on the site if the printer, it's still in warranty... not even an answer. So I spend almost 5 hours to check all the * solutions * I try, the printer still give me blank pages.

  The ink on the new cartridge is now... 45% or something. How his as possible! If the pages came out completely of white100 euro, in the trash, past time for anything on this site/forum... I do not understand how you are allowed to sell bad products on the market.

  For HP, you have deceived many people including me, I hope you will take away from the market, at least to the Danmark.

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are not familiar with the operating function of private messages of the Forum, this post instructions of a..

• Photosmart 7510 - black ink cartridge does not print

  Recently, I replaced the ink cartridges on my Photosmart 7510 C311A. These are all the "genuine HP cartridges ', full.

  Black ink (with the symbol of the Pentagon) does not print, not at all. I ran through the standard troubleshooting steps:

  Cleaning of printheads

  Cleaning of copper contacts

  * Check for a good evacuation

  My colleague in the corridor as the printer even so I borrowed his black ink cartridge and tried: same problem. The printer does not record that there is a problem, but when I run printing tests, where there should be a black ink, there is absolutely none. All other colors print correctly.

  The printer doesn't lack NOT of the printer "align" test however does not offer a suggestion of what to do from there. I've not seen - in test reports - an indiciation of the misalignment.
  
  Suggestions on what to do now?

  I had the same problem. I had replaced the empty cartridge black and suddenly, no ink. Finally, what has worked is
  (1) I removed all the cartridges and cleaned the copper connectors with wet Publix.
  (2) I got a wet paper towel and he pressed repeatedly on the silver circular vent that would be under the black cartridge. I did until no black came. Let it dry.
  (3) I replaced all the cartridges and on the printer. I went to tools/clean the cartridge. I did it a couple of times and he finally printed black ink! I confirmed by going to tools/align, and align the cartridges successfully. He had kept before crashes when the black ink did not work.

• Not compatible HP Photosmart C4480 printer ink cartridge

  HI - first time here - I have a HP Photosmart C4480 printer and have recently installed a new black ink cartridge - genuine HP 350XL - bought in Tesco and already used a few times.  I printed a page today, and when I went to another printing, the printer says that the cartridge was incompatible.  I had not touched the printer between the prints. I tried out both cartridges and resettlement but still get the same message.  Also tried to turn again printer.

  I could understand if there was a problem with the cartridge and it was rejected as soon as I installed, but does not understand why this happens between the printing of pages.

  Any help would be appreciated

  Thank you

  Here a link to a document that addresses this cartridge error message that you get on the printer. It will give you troubleshooting to try in an effort to solve this problem with the printer. I hope this helps. If you reach the end of the document and have done all the solutions proposed by the document, would seek to substitute.

  If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.
  
  HP Technical Support call case form:

  https://h10025.www1.HP.com/ewfrf/wc/phoneInput?cc=us & DLC = in & LC = in & Product = 5061082

• Change ink cartridges

  My Officejet Pro 8500 tells me I need to change the ink cartridge, but it is not what color.  How will I know?

  Hi L611,.

  The display shows usually the color of the ink tank is low or cartridge is out. But you can print a test page from the computer and find information about the empty or low ink tank.

  The following link will guide you with the same.

  http://support.HP.com/us-en/document/c01615784

• Photosmart 7520: hp photosmart 7520 yellow ink cartridge will not in (pop out of space)

  I tried to install two different new HP 564 XL yellow ink cartridge in my Photosmart 7520. They arise constantly from their slots. I managed with the magenta cartridge that is similar, but the yolks do not remain in place. What is the solution?

  Hi Rebmark, I did some research and found a troubleshooting page that describes some steps that might solve this problem.
  
  http://support.HP.com/us-en/product/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/document/c02944025

  Step #9 may be the answer you're looking for. When the ink cartridges is not properly connected, it can help try gently bending the cartridge tab try to avoid to bend this tab over a half inch, as it could damage the cartridge.
  
  I hope this helps, but let me know if you're still having problems!

• F380: Change ink cartridges in the F380

  Followed the guide step by step how to change the ink cartridges, but the reel/roller stops at the Center for me to be able to take the empty cartridges from the printer.

  He stops only at both ends inside the printer, do I put hand in stop or it will take off hand? Kind of need my hand but if necessity... HELP ME, PLEASEEEEEEEEEEEEEEEEEEEEEEEEEE?

  Tina

  so... I grew inpatient & 15mins of posting my question, I indeed put my hand in there! Fixed problem, but thanks... thumbs up to clicked

• Photosmart c3150 check ink cartridge blink after replacing the cartridge

  Almost every time I have to replace a cartridge check ink cartridge blinking and I can not find anything wrong.

  If the led check cartridge blinking after changing a cartridge, then there is a document with steps to help solve this problem. The document can be accessed here.

  Hope this helps Richard.

• HP Officejet 6600: Change ink cartridges Hp OfficeJet 6600

  I have just completed my first ink cartridge and need to change all four (black and three-color)

  How do you get the print head to slide in the Middle so that when you open the door for access to the

  dimensional ink you can do.  My printhead is still stopped on the right hand side and I don't know how to do so that he can stop in the Middle so I can put new cartridges in place.   The three color cartridges are

  go out right now and the black cartridge is in place.

  Here, the document shows how to replace the cartridges, the printer must be turned on.

• Printer Photosmart D7560: message 'ink cartridge problem '.

  I received an alert of yellow ink.  I replaced the cartridge CORRECTLY, closed the access door and I had the 'ink cartridge problem' indicating the cartridge seems to be missing or damaged.    The cartridge is new and I reinstalled it 5 times already.  I unplugged the power cord - both ends.  I turned the machine and then turn it on again.  YET I still get the 1) 'ink cartridge problem', 2) the warning of ink and finally 3) the printer does not print.  Can someone help me?

  The document here can help solve the cartridge error message on your Photosmart D7560 printer.  If the steps in the first three steps do not resolve the problem, you will probably need to replace the cartridge.  In this case, see here for cartridge guaranteed, assuming it's a HP cartridge.

• Investigation of HP Photosmart 7525 on ink cartridge printer

  We just bought a printer HP Photosmart 7525. If the color ink cartridges are empty, will always print in black and white?

  Hello

  No, normally, it stops during the reheating process. I did a test run last year, we can force it to print black ink only, BUT the success rate was 30% and it printed very slow, I called snail baby.

  Kind regards.

• Change ink cartridges (question on installation)

  It's a pretty basic question, but since I have never changed a cartridge before, is there something I need to do before introducing a new black cartridge, I received a message saying that he was weak. Can I just install it, or do I have to unplug the printer and the USB cord or what. Thanks in advance. ~ ~ Sandie

  What printer model?  Generally, you must have the printer plugged in and turned, and then open the cover.  After a few seconds, the cartridges should be released to change, either moving to the Centre for access, or free access to the right or the left.  It is not necessary or desirable to unplug the USB cable.

  Note that for most models the low ink indicator is a warning that the ink is exhausted, you don't need to actually change the cartridge until the print quality begins to suffer.

• Photosmart B010 black ink cartridge not working not not after replacing

  I print color but not black after the replacement of the cartridge. What can I do?

  Hi glennbelgium,

  I have linked a document with good to take troubleshooting steps.  Click here  The name of this document is not exactly on the point, but the steps are on point.  I could start by checking that you do not have low ink cartridges and replace those who are weak.  When you get to the step to clean the printhead , I'd do this process 2 or 3 times if necessary.

  Let me know how it goes.

  Good luck!