Change ink cartridges

Similar Questions

• F380: Change ink cartridges in the F380

  Followed the guide step by step how to change the ink cartridges, but the reel/roller stops at the Center for me to be able to take the empty cartridges from the printer.

  He stops only at both ends inside the printer, do I put hand in stop or it will take off hand? Kind of need my hand but if necessity... HELP ME, PLEASEEEEEEEEEEEEEEEEEEEEEEEEEE?

  Tina

  so... I grew inpatient & 15mins of posting my question, I indeed put my hand in there! Fixed problem, but thanks... thumbs up to clicked

• HP Officejet 6600: Change ink cartridges Hp OfficeJet 6600

  I have just completed my first ink cartridge and need to change all four (black and three-color)

  How do you get the print head to slide in the Middle so that when you open the door for access to the

  dimensional ink you can do.  My printhead is still stopped on the right hand side and I don't know how to do so that he can stop in the Middle so I can put new cartridges in place.   The three color cartridges are

  go out right now and the black cartridge is in place.

  Here, the document shows how to replace the cartridges, the printer must be turned on.

• Change ink cartridges CN216A Photosmart Plus B210

  Ink cartridges carriage does not come to the center when I lift the cover if I put in new cartridges.

  However, the fact printer print and copy, for transport of cartridge works for printing.  Help!

  Hello Shorty944and welcome to the Forums of HP!

  I see that you have issues with your transport movement, but only when changing cartridges. I would like to help with that today.

  I suggest you perform a power reset. Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  "I suggest also running through the steps described in this document on 'traffic Jam' or ' 0X610000F6" Message appears on the control panel, just in case there is a problem with the transport catch or delaying its movement.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Change ink cartridges (question on installation)

  It's a pretty basic question, but since I have never changed a cartridge before, is there something I need to do before introducing a new black cartridge, I received a message saying that he was weak. Can I just install it, or do I have to unplug the printer and the USB cord or what. Thanks in advance. ~ ~ Sandie

  What printer model?  Generally, you must have the printer plugged in and turned, and then open the cover.  After a few seconds, the cartridges should be released to change, either moving to the Centre for access, or free access to the right or the left.  It is not necessary or desirable to unplug the USB cable.

  Note that for most models the low ink indicator is a warning that the ink is exhausted, you don't need to actually change the cartridge until the print quality begins to suffer.

• Change ink cartridge

  What do you do with a B110 if transport does not Center once you turn it on and lift the lid?

  Thank you

  At the end of the day, as nothing else was not working, I turned off the printer, lifted the lid and then the print head was moving to its final position managed to stop it in the middle. Then, I was able to change the cartridge.

  Gross, but it's what worked.

• Camera HP photosmart C4480 printer does not print properly after changing ink cartridges

  My printer ran low on ink... I replaced both cartridges, after which I was instructed to print an alignment sheet. It does not write legibly. I tried to reproduce this sheet several times with no improvement in quality, therefore it does not meet an alignment check. How can I improve the quality of printing? On my old printer, I used to be able to "clean head", but it does seem to be this option on this printer, or is it?

  Hello

  -What version of Windows is installed on your computer?

  Please follow the steps mentioned below and get back to us with the results.

  Method 1:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01637692&cc=us&DLC=en&LC=en&product=3418705

  If method 1 did not fix the issue, please continue with method 2.

   

  Method 2: Update the printer drivers and check.

  Update the drivers of HP using the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=3418705&

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If still you face the same problem, I suggest that get you in touch with HP support for help.

  I hope that helps!

• HP Photosmart C4440: change ink cartridges

  I have not used this printer for some time but it is like new. I need new cartridges of ink but only bought 2 "sort-clour. I replaced the one clour but left the "black only" cartridge dock empty. Am I right in assuming that I need replaced as well? The power light blinks and the screen reads "print cartidge (s) missing or not detected. Can I use the other color cartridge?

  Hello

  You need to replace the black cartridge as well in order to solve the problem.

  Please see the document in the link below to fix the problem:

  http://support.HP.com/us-en/document/c01442936

  Give Kudos to say 'Thank you' by clicking the 'PLoP icon '.

  Click on 'Accept as Solution' if it has solved your problem, while others may find it.
  Although I am an employee of HP, I speak for myself and not for HP.

• Does not work HP C7280 all-in-One re ink cartridge to expire-pressing 'OK' to activate printing

  All-in-One HP C7280: received message that ink cartridge is about to expire. In order to '... continue with this ink' (it has not yet expired), I pressed 'OK', but nothing happened (the message is not 'disappear' from the screen"and I am not able to print. I turned the printer off-and-two times but nothing helped. The "OK" button worked, even if, to lead to the elimination of a message previous concerning a different ink cartridge havingactually has expired.  Suggestions?

  Thanks for the info. I'll try your tactics by chance discovered when the problem recurs. I finally gave in and changed ink cartridges--lost some of the expensive ink HP - as I had to print a document on this printer as the other was not available.

• Photosmart HP 7510: Change what black ink cartridge is used.

  Our 7510 HP ink slots for small and XL cartridges, however it will not use the small cartridge ink. How to change the parameters to pass to the thin cartridge XL, small is running out of ink and I can't find the black ink cartridge (Photo) in stores now. I bought two 'small', one was a XL, not labelled as such and we ordered cartridges from HP on the web and they were too big too. I need to be able to use the XL Black ink cartridge that is installed.

  Thank you..

  Hello

  First, XL ink cartridges are physically the same size with normal cartridges (same number). The difference is more inks XL cartridges.

  Your printer has 2 black ink cartridges, one narrower called Photo ink cartridge and one large/more bigger called black ink cartridge. When printing in grayscale, the printer will mix all the colors to give B & W. If you want to print black ink only, you must indicate to your printer. Please try

  (a) double-click the desktop printer icon.
  (b) click on set preferences.
  (c) click on advanced.
  d select "Black ink" only for printing in grayscale
  (e) click Ok/apply.
  
  Note: printer must still all color inks and it will consume a very small amount of ink over the warmng of trial.
  
  Kind regards.

• My hp C309g printer range fails to align. just changed the ink cartridges. Works on Windows 7.

  has a great. My son worked hard a yuear there to get this printer working... He changed the cartridges of ink a couble of day and now it is not printing.  We tried to realign the heads but it come as "Failed" to align on the screen... Please any suggestions.

  Ok.  Once remove you / reinstall the print head, try to clean the printheads via the printer software.

  If it does not, the new print heads are about $95 or you can taste (unofficial) cleaning procedures listed on these forums.  Search for them.

• Office Jet 6500 will not print after changing the ink cartridges

  Office Jet 6500 will not print after changing the ink cartridges

  Hello

  This doesn't seem to be a problem with the printer itself and not Windows. I also suggest to contact the manufacturer. In this case, HP.

  Please see here: http://www8.hp.com/us/en/support-drivers.html

• Maxify MB2320 will not print after changing the ink cartridge

  I just changed my black ink cartridge last night and now it won't print. B504 code keeps coming up and I followed these instructions to restart the printer. Whenever I turn on the printer, it spits out 2 pieces of paper, so the paper is not jammed.

  Hi GinaC,

  To resolve the error B504, contact technical support directly. There is NO charge for this call. Information in real-time to a technical assistance call live would be very beneficial in this case.

  Please call 1-866-261-9362, Monday - Friday 10:00-10: 00 ET (excluding holidays).

• OfficeJet pro 8500 a910a: ink cartridge change any help

  I changed all the ink cartridges in my printer except the magenta, and she will still not print the test correctly.  How the test for a bad print head?

  Error message, "faullty or incompatible printer cartridge.  Replacement cartridge with cartridge hp authorized but the printer does not print.  Error message just for rehearsals.     Tried to close all night, connectors disconnected, but still get the error msg.  What to do next? Someone out there have this pproblem, how fix you it?

• HP 6520 will not work after changing the black ink cartridges

  Changed the cartridges and now black ink will not work. This is the second or third time only to change the cartridges - did not have a problem before, but of course, it is while the printer was still under warranty. It is now about a year and a half.

  I used all the suggested diagnosis - head cleaned, head aligned, etc, etc, etc, and nothing has helped.

  The black cartridge worked after the swap, but with a few lines do not print or missing--now produces almost nothing.

  Cartridges color was wonderful at the beginning of the troubleshooting process, but now they're starting to not look right - with spare no effort to correct the print head, he seems to be making it worse.

  Suggestions?

  @scrdagain

  I will send you a private message (departure from the envelope at the top on the right)