Printer Photosmart D7560: message 'ink cartridge problem '.

Similar Questions

• All-in-one printer, HP Photosmart C6280 poster 'ink cartridge problem '.

  She continues... The following ink cartrige (s) seems to be missing or damage. Refer to the printer documentation.  It does not appear what ink cartrage it is. None of my ink cartrages are missing, and the printer was working fine 2 days ago.

  Please advise,

  Rosie

  I'm sorry to hear that you still experience this issue. There is one step more that I would take to solve this problem. It's a hard reset with the cartridges taken out of the machine. No user settings are lost with a hard reset and it will attempt to restore the printer to a known working state.

  To make the following reset:
  1. remove all the cartridges of the machine and close the cover.
  2. with the printer plugged directly into a wall outlet and turned on, unplug the power cord from the back of the printer.
  3. then disconnect the power cord from the wall outlet.
  4. wait at least 30-60 seconds
  5. plug the power cord into the wall outlet first. If a module with the power cord, make sure that the light of the module and then reconnect power cord on the back of the printer
  6. the printer should power back on by itself, but if not use the power button on front panel to turn on machine.
  7. once the printer indicates that the cartridges are missing, open up and put ink inside the printer and see if it will work eventually.

  After the reset above; I would replace the faulty cartridge at this point. If still a problem after you have replaced the cartridge, repeat the procedure of cleaning the contacts to ensure that the contacts are clean and that all the process of packaging materials have been removed.

• Photosmart 7510 magenta ink cartridge problem

  I have a photosmart 7510 bought 17/05/12 yet but it is in warranty.  I had problems with the magenta ink.  If I do an estimated ink level, it shows that I have a lot.  It was again last month, and he doesn't get a lot of use.  Magenta has suddenly stopped working.  I reported a revised print quality, it showed that anything for magenta.  I removed the cartridge, cleaned, cleared the area of sufficient ventilation with a PIN and followed all the instructions, then succeeded him.  New diagnostic print quality report showed a sufficient amount of magenta.  I printed a page, then lost magenta again.  I did this 3 times now.  Cartridge expiration date is 08/22/15.  I had the same problem with yellow several months ago, but here it is finally resolved itself.  Are there more steps should I take to get the magenta to work?  There is more than half of the bar display for ink available, when it shows I have ink on my report.  I am beyond frustrated.  At all time, for levels of ink from the printer itself shows I have a lot of ink, even when the test page for diagnostic andprint report show no magenta.  Thanks in advance for your suggestions.

  Hi woodjams,

  Thank you for your answer!

  If it works and stops intermittently and you have tried these steps several times, so I think that the problem lies in the printhead itself.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Hope this information is useful and have a great day!

• OfficeJet 4630: Install new printer - ink cartridge problem

  I'll put up a new HP Officejet 4630. I installed two cartridges of HP61 that came with the new printer. The menu of the poster printer "ink cartridge problem, the following ink cartridge needs to be replaced" followed by a black circle. How a new cartridge would be acceptable?

  Follow-up of your steps. Cartridges still a problem in the printer display.  Took printer at Staples. The store manager confirmed my status then loaded 2 new cartridges (free) the sales basket - printer worked.  Staples deals custormers good!

• Ink cartridge problem C310a: the following ink cartridge appears to be missing or damaged.

  Error message on the printer for the second time in a month. Ink cartridge problem: the following ink cartridge appears to be missing or damaged. (Blue ink) Refer to the printer Documentation. This error message came in January so I replaced the blue ink cartridge (I use genuine HP cartridges) it is now once again, so it takes the printer not the cartridge. There is nothing about it in my "documentation" and nothing relevant came in "troubleshooting."

  Hi there JanePr, welcome to the Forums!

  I understand that you see an error message on your Photosmart C310a on the ink cartridge is missing or damaged. The print head may have a problem that could trigger this error. I have a troubleshooting guide that I recommend that follow you, however, if you have already tried no steps, ignore them, as the replacement of the cartridge.

  Guide to link: http://support.hp.com/us-en/document/c02255339

  If you follow the steps and the question remains, I would recommend then call HP Technical Support to see other options for you. If you call in North America, the number is 1-800-474-6836 and for all
  other regions, click here:
  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  Take care

• Printhead 7510 gliding is more to the center when I open the printer to change the ink cartridges.

  I have an all-in-one Photosmart 7510. My slides print head is no longer the center when I open the printer to change the ink cartridges. It remains in place on the right side. I can't access the cartridges. Otherwise, the printer can print pages without problem - it is not blocked when printing. I have had this printer for during 9 months - it is a new problem.

  Thanks, but I returned the printer for a replacement - it was still under warranty.

• 'Ink cartridge problem' with model C309g

  I inserted a new black ink to the my Photosmart C309g. I want to only use black instead of having to buy the colors as well. When I put in the dark, the screen comes up with 'ink cartridge problem", saying that the following cartridges (all color and black in the photo) are missing or damaged. Is any way to get the printer to work with the black only? I can't make it past the 'problem' screen and it will not bypass it with me I'm trying to print something in black and white.

  Thank you in advance for your help!

  @khuransh, you will need to replace the color cartridges until you are able to print again. The printer will not work without the color cartridges if you try to print in black. Color cartridges mixed with black to form a true black color. So when the colors are missing, the black will not work.

  @creditcard, the same applies, if the cartridge of yellow that came out, the black will not work because she needed some than yellow to form a black.

• Office Jet 6500 will not print after changing the ink cartridges

  Office Jet 6500 will not print after changing the ink cartridges

  Hello

  This doesn't seem to be a problem with the printer itself and not Windows. I also suggest to contact the manufacturer. In this case, HP.

  Please see here: http://www8.hp.com/us/en/support-drivers.html

• HP Officejet J4540 - ink cartridge problem

  I was printing when all of a sudden my print out fuzzy and a message came "cartridge problem - (black) refer to the documentation for the device for troubleshooting of printing.  I lost my documentation for this printer, so went through all positions.  I thought I had fixed (with one of the posted solutions) However, when I went to print again this morning, the page was all blurred again and the same message came.  I tried to repeat the solution, I changed the cartridges, and always the printer is showing the same message.  I'm terribly need my printer, because I have a home business and print all my shipping labels every day using this printer. Can I just go out and buy a new printer or is there hope for this one. It is not even a year yet.
  Thanks for any help that anyone can give!

  Here is a link that addresses the mistakes of rejection of cartridge for your printer model. It will give troubleshooting steps to try to try to resolve the problem you are experiencing.

  Here is another link to a document that addresses printing blurred, faded and blurred out which will give you a few extra steps to take are not in that first link, you can try to solve the problem that goes beyond the search for the material. I hope this helps.

• Photosmart 7510 - black ink cartridge does not print

  Recently, I replaced the ink cartridges on my Photosmart 7510 C311A. These are all the "genuine HP cartridges ', full.

  Black ink (with the symbol of the Pentagon) does not print, not at all. I ran through the standard troubleshooting steps:

  Cleaning of printheads

  Cleaning of copper contacts

  * Check for a good evacuation

  My colleague in the corridor as the printer even so I borrowed his black ink cartridge and tried: same problem. The printer does not record that there is a problem, but when I run printing tests, where there should be a black ink, there is absolutely none. All other colors print correctly.

  The printer doesn't lack NOT of the printer "align" test however does not offer a suggestion of what to do from there. I've not seen - in test reports - an indiciation of the misalignment.
  
  Suggestions on what to do now?

  I had the same problem. I had replaced the empty cartridge black and suddenly, no ink. Finally, what has worked is
  (1) I removed all the cartridges and cleaned the copper connectors with wet Publix.
  (2) I got a wet paper towel and he pressed repeatedly on the silver circular vent that would be under the black cartridge. I did until no black came. Let it dry.
  (3) I replaced all the cartridges and on the printer. I went to tools/clean the cartridge. I did it a couple of times and he finally printed black ink! I confirmed by going to tools/align, and align the cartridges successfully. He had kept before crashes when the black ink did not work.

• Ink cartridge problem - all inks to color, installed by the printer does not print

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  As you suggested, none of the ink cartridge works with the printer, let us know if you are able to print the test page for the printer. If you are unable to print a test page for the printer, I suggest you to contact the hardware manufacturer for assistance.

  Kind regards

  Gaurav Prakash - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Photosmart Plus all-in-One: ink cartridge problems

  I have a model B209.  Last week, I decided that I would take the four staples of cartridgesto used, because they have a recycling program.  I wanted to only buy black ink, so I bought 2 separate packages of the 564 Black.  Has opened a package and installed as usual.  All I keep seeing is problem Catrridge of ink: the following ink cartridges seems to be missing or damaged.  see status screen on your computer for more details.  The question is # 1 status display has not yet shown on my computer. #2 I can't even to other options on the Touchscrren of the printer.  I have read and watched videos of people who give directions and instructions on cleaning the print heads.  I tried to remove the printhead, soaking in the water, leaving back dry and enforcement.  I did these things repeatedly.  When I soak the print head in the water, the water changes color.  I hope that I have accidentally hit the wrong part of print head when I removed it from the printer.  Please help, because it's my only other option when I can't access wifi to my portable device used for the printing of tickets, Groupons, etc..  Thank you!

  Your printer requres all 4 cartridges to be present, that is why the printer tells you that the cartridges are missing can may not last.

  Some newer model printers, which use the cartridges with integrated print heads, can operate with only the black cartridge only.

  But the B209, separated print head and ink cartridges, if not all the cartridges are installed, the print head does not work.

• Series HP Photosmart Premium C310 - ink cartridge black stopped printing XL

  I removed my XL Black ink cartridge and failed to replace it immediately.  Is it possible that residual ink in the printhead has dried up, and the new cartridge cannot be used for printing?

  Hello MDavis110,

  Short answer, Yes. However, there are steps to take to correct the situation. See the link below for the troubleshooting steps you can try:

  http://support.HP.com/us-en/document/c02187415

  If this is not the problem and that your printer is no longer under warranty, you can try the solution listed in the thread linked below:

  http://h30434.www3.HP.com/T5/other-printing-questions/HP-6500-Office-Jet-E709a-black-printer-cartridge-HP-920-not/m-p/447545

  Good luck!

• Camera HP photosmart C4480 printer does not print properly after changing ink cartridges

  My printer ran low on ink... I replaced both cartridges, after which I was instructed to print an alignment sheet. It does not write legibly. I tried to reproduce this sheet several times with no improvement in quality, therefore it does not meet an alignment check. How can I improve the quality of printing? On my old printer, I used to be able to "clean head", but it does seem to be this option on this printer, or is it?

  Hello

  -What version of Windows is installed on your computer?

  Please follow the steps mentioned below and get back to us with the results.

  Method 1:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01637692&cc=us&DLC=en&LC=en&product=3418705

  If method 1 did not fix the issue, please continue with method 2.

   

  Method 2: Update the printer drivers and check.

  Update the drivers of HP using the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=3418705&

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If still you face the same problem, I suggest that get you in touch with HP support for help.

  I hope that helps!

• prints illegible font, ink cartridge problem

  I try to print with my NEW desire to my MacBook Air OS X 5530. I get a blocky font type which is not readable. I also have a message on the printer that I need to replace the print cartridge, even if I tried to print only 6 very brief things. I tried to remove and replace the ink cartridges but when I open the printer to make the cartridges do not move in the position where I can remove them. I turned the printer off and then on again and was forced to redo the alignment that spend even if there also the polyhedral police. Help, please!

  I'm glad to hear that you got the printer working properly.

  -Chauntain