HP photosmart c6150: my hp printer is not a symbol $.

Similar Questions

• Photosmart HP 5510: The printer does not print in black

  All of a sudden, my printer does not print in black. I replaced the cartridge with a new black cartridge with the same result. All other colours print fine. I checked the settings on the device and it shows that the black cartridge is full.

  If anyone has had this problem and can offer a solution? Thank you very much.

  In the paper here troubleshooting steps can help solve the black does not print on your Photosmart 5510.  Be sure to check the events on the cartridge, as described in the document.  If you go through all the troubleshooting steps without resolving the question then can help to manually clean the print head as shown in the post here.

• Photosmart B110 (CB4F28)-l' printer does not

  I have a Photosmart B110 series wireless printer, which has suddenly refused to print. I have a PC with windows 8 and good drive installed. HP printer control shows the printer as offline, but when I run the Test report wireless and HP Network Configuration - everything seems fine.

  All print jobs are displayed as of mistakes and being held in a queue.

  I don't know what the problem is - can you help me.

  Thank you very much

  Thank you very much for this - that I had lived this routine (a few times) without success, unfortunately. I think it was a problem of Windows 8 that all my PSA had gone offline, even if the computer and diagnosis reports showed as being online.
  I now managed to get all the elements, including the printer by fiddling with the setup - file but don't know how!
  Anyway thanks a lot for your answer

• Photosmart C510 c510 estn: printer will not work little matter what I do

  Very frustracted, the printer ran out of ink, I replaced all the cartridges and I continue to receive messages that the ink is required. Also the ink Error Message and the Tablet keeps asking me to remove the cartridges and clean the head I did several times. Turn turn off/on the printer, including a number of times.

  Hey @v053573,

  Thanks for getting back to me on this subject. I'm sorry to learn that the given steps did not resolve the 'ink system failure' on your HP Photosmart eStation all-in-one printer C510a.

  As per your request, here is a list of all printers that use cartridges HP 564:

  • HP Deskjet 3520
  • Photosmart all-in-in-One
  • Photosmart Premium all-in-One
  • Photosmart Premium Fax all-in-One
  • Photosmart Premium Touchsmart all-in-One Web
  • Printer Photosmart D5445
  • All-in-one Photosmart 5520
  • Printer Photosmart D5460
  • Photosmart C6340
  • Photosmart C6350
  • Photosmart C6380
  • All-in-one Photosmart 6520
  • All-in-one Photosmart 7520
  • Photosmart E-Station
  • Photosmart 5510 all-in-One
  • Photosmart all-in-one 6510
  • All-in-one Photosmart 7510
  • Photosmart D7560 h
  • Photosmart B8550
  • All-in-one Officejet 4620

  I highly recommend that you contact our Technical Support by phone queue to explore additional options before buying a replacement printer.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  I wish you good luck going forward with this!

• Photosmart HP5520: HP 5520 Photosmart All in One printer does not print

  Hello

  I was away for a few weeks and when I got home that my HP 5520 would not print. Troubleshooting in devices and printers did not fix it. The full current confirmed printer HP S/W installation wizard and the drivers installed. The installation wizard produces a test analysis, but not a test print.

  Print and scan doctor also identities printer OK but cannot produce a test print, even if it did not produce a test INTERNAL page. Printing and scanning identified an issue with the S/W which "cannot be fixed without uninstalling and reinstalling" the software.

  Software reinstalled as suggested, but it has stalled on "checking network das" so reinstal is not completed properly I guess. Now, I seem to be less well off than I was before.

  I checked the print spooler and its running ok.

  I checked windows udates and they are all up to date

  I even tried restoring the system in desperation, but that has not changed anything either.

  I tried using just USB connect - no effect

  I have true wireless use only for connect - no effect

  I am running windows 10 on HP pavilion laptop.

  I'm running out of ideas on how I can print again, so any help would be greatly appreciated!

  Thank you very much

  This is the solution, for me at least. I was convinced there had to be a solution of windows related to this, but despite several attempts, I could not get the answers so ultimately I reset the PC and it took about an hour, but when he did all broken back in life and has worked as before. Bit of a pain having to reinstall software but it was worth it.

• HP Photosmart All in a 309g: HP Photosmart 309 g will print but not scan on Win 7 & 10

  I have 2 computers both wireless and the printer listed above. Laptop works under Win 7 and had no problem with Fax & Scan. Office switched to Win10. Both are 64-bit. I also have Culatello my Netgear router and went with the WIFI from my cable provider. Now neither computer will scan! I can print documents from both computers, but no analysis. Having exhausted all possible nonsense that has been offered. I need this feature to work - a small business depends on it. I also need some directions forward straight and easy to understand to achieve! Someone help me please! Thanks in advance.

  Hi Rainbow 7000,

  Thanks for your promt help-the enjoy. After I posted my question, I have searched and searched the site of HP and dug up any information that could help. By a miracle, I think that I have reinstall the wizard and Dr. Moreover, both computers would be printed on the printer, but wouldn't analyze.

  I ran the programs and bingo, I can now scan on the laptop with Windows 7! When it rains, it pours, I had to get a new adapter for the desktop on the floor when I run Windows 10. Quickly, I plugged and gave it a try. No luck. So I will finalize the adapter and then try the same game plan.

  Thanks again, we will see how it goes!

  C:

• Photosmart 5520, vista, the printer does not illuminate until I have unplug and plug it back

  Printer won't turn on after use

  Please follow the instructions here in order and answer all questions in detail.

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/want-good-answers-ask-good-questions/TD-p/7933

• Help! PRINTER DOES NOT!

  Hi, I have a HP Photosmart D110. My printer is not printing all of a sudden (of course as soon as I need to print a bunch of stuff for College, right?). He said that he was in an error state and could not print my document. So I unplugged and restarted it and then were. It says that an error has occurred again when printing. So he changed error status to have just an error occurs? It will print if I copy something and the status of the wireless printer says it works. What can I do to fix this? I'm not terrible with technology, but I can do something if someone he explained step-by-step.

  Thank you

  Too bad! I discovered that there are two the same printers in my building and my computer has been picking up their printer as well, I just mine choose instead. I feel stupid now.

• Photoes printed are not equal to calibrated screen

  I have Photoshop CS3, calibrated screen (with x-rite eye - one display 2) all-in-one printer HP Photosmart 7283. The prints are not the same colors on my screen. How to solve this problem?

  I see that the i1 offers a luminance target setting. Not only that, he has a prior calibration function that allows to use the OSD of the monitor controls to get as close as possible to the target before the calibration. It is the best way to do it.

  Read the manual (you need to be in advanced mode). Then go to a target of 100-110 cd/m².

  Fact.

  Then go to the dialog box print in Photoshop. Under color management, click on 'Document '. It should say Adobe RGB.

  Choose "Photoshop manages color".

  Then, under "Profile of the printer" see if there is a that corresponds to the printer and the paper you are using. If not, this means that HP provides no profiles for this printer. In this case, you must use "Printer manages color" and the foregoing is questionable.

  If there is, take it, and then click 'Print settings' to take you to the printer driver. Here, clear color printer (ICM off or similar) management. Again choose the correct paper type so that the printer use the right amount of ink.

  That's all there is. I repeat myself just from this point. Basically, I said all this in the first post in the PS Windows forum.

• After a power outage my printer Photosmart C6150 does not completely start.

  Printer turns on, display stands, then a few seconds later it turns off, then it turns back on and repeats indefinitely.  I tried to reset the andpowerstrip power module it is plugged. No luck.  Is he dead?

  Hello Jpjacksonjr,

  Since you have already tried to reset the unit and who has not solved the question that we should try to use the most advanced resets.

  Perform the steps for reset provided by PrintDoc on this forum thread.

  Radio wireless guard fails on photosmart c6150

• Photosmart C4580 all-in-One - color print is not true

  Regardless of the software application in use, our printer does not print the colors on the screen. We have worked through all the settings and the types of paper and color choices, and nothing seems to make a difference. Tonight I prepared a certificate using PowerPoint and one of the predefined themes - nice blue background prnited on a Brown dirty. Ideas, suggestions, etc.?

  Hello there Hermits2,

  I saw your post on the issue of "print quality" you have little matter where you want to print from your Photosmart C4580.

  I understand that you have already tried several troubleshooting steps however, browse the guide below and if anything that you have not yet tried, try them. The print heads could very well be on their way if do not help the steps. If this is the case, then I would say calling HP support to see about a trade in option for you.

  Missing colors in printing

  If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Have a great Monday

• Photosmart 7510 - black ink cartridge does not print

  Recently, I replaced the ink cartridges on my Photosmart 7510 C311A. These are all the "genuine HP cartridges ', full.

  Black ink (with the symbol of the Pentagon) does not print, not at all. I ran through the standard troubleshooting steps:

  Cleaning of printheads

  Cleaning of copper contacts

  * Check for a good evacuation

  My colleague in the corridor as the printer even so I borrowed his black ink cartridge and tried: same problem. The printer does not record that there is a problem, but when I run printing tests, where there should be a black ink, there is absolutely none. All other colors print correctly.

  The printer doesn't lack NOT of the printer "align" test however does not offer a suggestion of what to do from there. I've not seen - in test reports - an indiciation of the misalignment.
  
  Suggestions on what to do now?

  I had the same problem. I had replaced the empty cartridge black and suddenly, no ink. Finally, what has worked is
  (1) I removed all the cartridges and cleaned the copper connectors with wet Publix.
  (2) I got a wet paper towel and he pressed repeatedly on the silver circular vent that would be under the black cartridge. I did until no black came. Let it dry.
  (3) I replaced all the cartridges and on the printer. I went to tools/clean the cartridge. I did it a couple of times and he finally printed black ink! I confirmed by going to tools/align, and align the cartridges successfully. He had kept before crashes when the black ink did not work.

• Printer HP Photosmart 8750 on Windows XP, do not print within the frame.

  Printer HP Photosmart 8750 on Windows XP does not print photo correctly and cannot be adjusted manually to print in time. Printing is too high or off the coast on one side or the other. How can I fix this?

  Hello
  
  Try to download and run the doctor print and scan located here:
  
  http://support.HP.com/us-en/document/c03275041
  
  It can fix its own much and if not to give a better idea of what is happening.
  
  Good luck!

• HP photosmart 7520: printer does not print when lite blue flashes

  I just noticed recently that my printer does not print blue wifi lite flashes when the icon of the printer on my computer says printer not connected, but it's all about.  Ive tried unpluging the router, then the printer and restart the computer that gets everything back up and working, but after a while it goes back to blinking and does not print what is wrong.

  Hello

  Asuming the printer is connected wireless, a flashing blue light indicates a lost wifi connection, the pritner is disconnected from your network at the time and so it will not be printed.

  I suggest to place the printer near the router, but not less than 2 metres. too far can cause the connection to become less stable, but also too close distance due to dead radio signal problems.

  Try putting 2-3 meters to test, make sure you there are no metal objects in the path between the pritner and router (which can affect the wireless radio).

  Other that those try after the following steps to solve this kind of problem:

  http://support.HP.com/us-en/product/HP-Photosmart-7520-e-all-in-one-printer/5199461/model/5199462/document/c03381908

  Plwase informed me of a difference

  Shlomi

• changed router photosmart b110 e-all-in-one printer does not work

  changed router photosmart b110 e-all-in-one printer does not work

  Hi aged60,

  I'm sorry to hear that you have linking problems with your Photosmart B110 printer.

  I've included a link to HP Wireless Printing Center Troubleshooting web page.  In the section entitled "your printer was working on the network before and now is not" there are clear instructions to follow when your router has been changed or updated.  If you follow the instructions you should be able to communicate with your printer.

  HP wireless printing Center - Troubleshooting

  http://www.HP.com/global/us/en/wireless/troubleshooting.html