Similar Questions

• My laptop does not connect to the Internet wireless or Ethernet.

  Hi my laptop does not connect to Internet via Wi - Fi or Ethernet connection. He previously connected the two. The model is a portable HDX-18 1201 and runs the Windows Vista 64-bit operating system. I have had the laptop for a while now and this is the first time that this has happened. I tried to locate the network drivers but can't find them on the Device Manager. To my knowledge, I have not changed anything on the computer that may have caused this. If someone could help it would be greatly appreciated. Thanks Richard

  Hi Richard,

  Search for the latest drivers for your model laptop from the HP site and then try if operate you, install it, for the wireless and Ethernet cards

  just download the drivers from the HP website through another computer, copy it to MemoryStick and install the drivers on your laptop and see if it detects it fine, and then it should work Fine.

  Kind regards

  Amjad

• Windows Home Basic Edition does not connect to a grace wireless working group

  I'm running 3 computers on a workgroup that connects to the internet. A computer running Windows 7 Pro, another Windows XP Pro and the third is a laptop running Windows 7 Home Basic.  There are full between the 3 interoperability when connected via a LAN cable, even when the laptop is connected to the wireless router.  However, if I try to use the laptop without cable, it will connect to the router wireless as an unidentified Public network and therefore does not see the Working Group (and therefore there is no internet access).

  If I click on the icon of unidentified network in the center network & sharing, I expect to be able to select the type of network, I can use - i.e. knit - but instead I get a box indicating that it is a public network, unidentified without options.  I tried to use the difficulty Microsoft it 50725 - but he said he could not change the network settings and I should change in network settings - which I can't.

  In this mode, I can 'see' the laptop on the other two computers, but its network location is black (not the working group only when connected via cable) and if I try to open up the laptop I get an error message saying: it can not find the path.

  This is a recent problem that the system worked very well upward until a couple of there are days where I lost wireless connectivity. The signal strength is 100% (the router is normally less than 30 meters, although now is 1 meter away so I can plug the cable) and there is no other networks wireless within several km.  I have a total control through my browser to the router through the wireless link wireless, the material is so everything is OK - it takes a few adjustments to the software.

  Any ideas?

  Sorry for the delay in replying, I had problems to download all the drivers the most recent, but ultimately successful.

  Uninstall and reinstall the wireless card had no effect so I started the update or replacement of all other drivers as well.

  Replace the Bluetooth driver did the trick, even if it has been disabled in advance and it is always off - but for reasons that I doubt I'll never, understand which seems to have been the problem--for now

  Thanks for the advice - it always pays to be more radical than you ever thought necessary...

• HP Stream 7 does not connect at 5 GHz Wireless-N

  The stream of HP 7 supports connections to 5 GHZ Wireless-N? The included Realtek driver shows the connections of B/G/N. I'm unable to connect to a wireless 5 GHz N I have running. I tried to create the connection manually, but he sees any of this wireless network. Thank you!

  Hello

  It takes only the 2.4 GHz network supported. All you need is to allow your router to broadcast the double bands. He sees the 2.4 GHz band.

  Kind regards.

• WRT160NL problem: netbook does not connect to WAN more wireless

  The object just about everything said.

  Router is configured for manual installation, Wireless-G only, IP addresses from 2, (varies from 2 to 201).

  I have a Gigabyte M912 netbook that used to connect to the Internet via the wireless through my old D-Link and had no problem with it.

  With WL160NL, it connects to the wireless all right, but she's not anywhere from there. It gets an IP address, it connects successfully, but not internet sites are available. Ping gateway (192.168.1.1) gives 4 request timeouts. Other devices (Tablet Acer A500, break the smartphones, even a Wowwee Rovio sand) have no similar problem< connecting="" and="" seeing="" each="" other="" and="" connecting="" to="" the="">

  1. I have no idea why this is happening.

  2 restart the netbook, ignition and extinction of the wifi module, remove remembered network settings and enter their new etc. does nothing.

  3. manually configure the netbook to use a default instead of DHCP static IP address did not help.

  Any ideas on how to fix this? Where should I start looking?

  p.s. If it helps, the netbook uses an Atheros AR5007EG module.

  .. Detective Conan .aaand. Problem was in the WiFi module driver. Update all resolved.

  Should do it first.

• iPad does not connect to the server

  Kind of, it looks like my iPad has disappeared and twisted his tail (connection) and got lost somewhere in cyberspace.

  Yesterday morning he opens to the screen Hello > Slide Set up who brought up the screen 'could not activate iPad' with the message "your iPad could not be activated because the activation server is not reachable. Try to connect the iPad to iTunes to activate it, or try again in a few minutes. If the problem persists, contact Apple Support at apple.com/support".

  This condition actually began three days when it does not connect to my Airport wireless internet and I could not he deleted.  I made the troubleshooting on the dome using Airport utility that showed connections to the top and the green. My main computer is not affected. I was able to put a return by making a total system power off for a few minutes and then turned on one at a time with the modem (cable) beginning (all equipment - computers, iPad, modem and airport), then the airport, my main computer (2003 iMac screen all-in-one flat) then the dome of the iMac. They are all restored correctly at full speed. At the point where I was interested only in the dome as I was doing some work on it using Classic applications and did not activate the iPad until the most late in the evening.

  I was wondering what is happening and if there is an inexpensive way to get it running again?

  Sparkgapper

  p.s. There is an Apple Store here in El Paso, if it's a long drive where I live.

  If you have problems with the applications of stalling or crashing,

  double click on the "home" button

  -slide up on applications to force leave their

  Re-boot ipad.

  Press on and press and hold the sleep/wake button until a Red slider appears, and then drag the slider. Press and hold the sleep/wake button until the Apple logo appears.

  https://support.Apple.com/en-us/HT201559

  Force power down if above give it trouble you.

  At the same time hold the sleep/wake button and the Home button. Ten seconds or more.  Keep until the Apple logo appears.

  more information on the re-start:

  http://iPad.about.com/od/iPad_Guide/SS/how-to-reboot-your-iPad-power-off.htm

  This these tips from MichelPM to improve performance:

  https://discussions.Apple.com/message/29504169#29504169

  https://discussions.Apple.com/message/29504311#29504311

  Restore factory settings by loading the latest version of the ios that will support your machine:

  (1) make a full backup of your device if necessary.  Is two times better - cloud and computer.

  https://support.Apple.com/en-us/HT203977

  (2) three methods of restoration of your ipad.  [simple as abc]

  2.a) "you can use iTunes to restore your iPhone, iPad or iPod touch to factory settings and the latest version of iOS."

  http://support.Apple.com/kb/HT1414?viewlocale=en_US & local = en_US

  2.b) be a little more insistent: "you can put your device iOS in recovery mode, then restore it via iTunes.:

  http://support.Apple.com/en-us/HT201263

  3.c) as a last resort, you might consider DFU (Device Firmware Update).  This could void your warranty.

  http://www.IMore.com/Tip-put-iPhone-iPad-DFU-mode

• LaserJet P1102W: [RESOLVED] LaserJet P1102W does not connect to a wireless network on Mac

  UPDATE: the below solution worked on my MacBook, both running El Capitan. Ignore the instructions provided in the manual of the P1102W and follow the steps below.

  I have a P1102W printer.

  Recently my LaserJet P1102W refuses to connect to networks using WPA Wireless.

  As it does not have an IP address, I can't access the web server.

  She also does not connect to my Mac Wireless via Bonjour. The printer will install when connected via USB.

  I installed printer HP Apple drivers, that contains the P1100 driver.

  The P1102W worked before wireless. I only noticed this anomaly since installation El Capitan and moving the printer to another room with my workstation.

  I need the printer to use the wireless network, as I did not have enough space on my desk for him. And I just can't place it anywhere within the range of a USB cable.

  Are there alternatives to this?

  Hi @rcosgrove,

  Welcome to the Forums of HP Support!

  I see that you encounter some problems connecting your Laserjet P1102w printer to your network wireless using your Mac computer. I can help you with that.

  First of all, I would like to mention that it would be easier to the printer connected to your network using a Windows PC. If you can't borrow or use a Windows PC, the following steps should allow you to connect the printer. If you can borrow a PC, please let me know what version of Windows and I can provide a link to the drivers to configure the printer automatically.

  Preparation of the printer

  1. Turn the printer off.
  2. While the printer is turned off, hold down the two buttons on top of the printer.
  3. Hold the buttons on top of the printer and the printer.
  4. Hold down the maintained for even 10 seconds.

  Wireless printer setting

  1. Make sure that the printer is connected to your Mac via the USB cable.
  2. Click on your Apple icon, system preferences and printers and Scanners.
  3. Click the icon of your printer on the left.
  4. Click Open print queue, printer installation, utility of printer, open printer and HTML Config utility.
  5. (If the above step generates an error, change your default browser on Safari. Please let me know if you need assistance with that).
  6. In this new window, click on the networking and wireless tab on the left.
  7. Under Mode of Communication, select Infrastructure.
  8. Select your network from the list and then click on the button with the arrows.
  9. Under Security Mode, select WPA/WPA 2. If you have an old router, you may need to select WEP instead.
  10. Enter your password wireless in the field below.
  11. Click on apply.

  Now, wait a few minutes. Your printer must change to have a solid blue light. If it is not the case, either the password has been entered incorrectly or there is a setting on the router that the printer is having a resolution of the issue. Please let me know if this is the case.

  Once you have a solid blue light:

  1. Unplug the USB cable.
  2. Return to the printers and Scanners.
  3. Hold down the CTRL key and click the icon of the printer on the left.
  4. Click on reset printing system.
  5. Click on the button "+" in the lower left corner.
  6. In this window, select your printer in the list.
  7. Click in the box next to and select your printer from the list.
  8. Click on Add.

  Please let me know if you are able of print or the results after following the above. If you can print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this information is useful. Please reply to this message with the results. Good luck!

• Smartphones from blackBerry Storm 2 (on Vodafone in the United Kingdom) does not connect to WiFi properly.

  I'm having a problem with my Storm 2 right now - it does not connect to the router wireless home properly.  Router is a wireless G of Belkin model.   The page "Manage the Conections" shows the connected device (green text, but - no checkmark) and the status page shows that he has an IP address assigned to it.  This is confirmed from the listing routers DHCP client.  But the WiFi icon remains Gray and I cannot get the phone to authenticate to confiure the accounts email outside the company.  Failed attempts to addresses of ping inside or outside the LAN with timeout errors.

  Can one suggest a solution to this is iiue please - even if it has replace the router!

  If it helps it is the result of the WiF self-diagnosis:

  A WiFi Diagnostics (Advanced): December 24, 2009 20:04:43

  A Wi - Fi connection
  Current profile: belkin54g
  SSID: belkin54g
  AP MAC address: 00:11:50:FF:15:20
  Security type: pre-shared Key (PSK)
  Association: success
  Authentication: success
  Local IP address: 192.168.2.11
  Signal level:-44 dBm
  Data connection speed: 54 Mbps
  Status: Acquired network
  Authentication failure reason:
  Network type: 802. 11 b / g
  Network channel: 1 pair
  Encryption: TKIP
  Group cipher: TKIP
  Gateway address: 192.168.2.1
  DHCP: success
  Primary DNS: 192.168.2.1
  Secondary DNS: 194.168.4.100
  Suffix DNS: Belkin
  Subnet mask: 255.255.255.0
  Server's domain suffix:
  Certificate: Not Applicable
  Software token: not Applicable

  Code hotspot:
  Hotspot message: not Applicable
  Hotspot status: not Applicable

  VPN
  Current profile:
  Address of the hub:
  Contact: n/a
  Authentication: n/a
  Secure the device IP:
  Status: VPN profile is not found.
  Hub address: n/a
  Hub IP:
  Primary DNS:
  Secondary DNS:
  DNS suffix:
  Set the subnet mask:
  New attempt to: life of Session:
  Re-login to:
  Failed connection attempts: 0
  Certificate: Software token does not apply:

  The question above is now sorted thanks - active Vodafone BIS on my contract and sudenly the Wi - Fi started working very well!

  Weird - but there you go, the (whims?) wonders of modern technology!

• computer laptop Sony vaio does not connect to internet

  Any help, my computer laptop vaio does not connect to the internet, wireless or lan help!

  Hello Alex,.

  Welcome to the community of Sony.

  Try to run all the steps mentioned here t solve the problem of Internet connection on your computer: http://community.sony.com/t5/VAIO-Networking/my-sony-vaio-always-cannot-connect-to-the-internet-some...

  Note: If my post answered your question, please mark it as an "accepted Solution".

• Want 4520: Hp Envy 4520 does not connect to the network

  4520 nine will recognize my home network and I put the password correctly, but it does not connect.  Went all out and under tension, but without success. Never had such a problem with other devices. I printed a diagnostic of the printer which suggests some issue with MAC address filtering on my sky router but have never enabled MAC address on my router filtering - a) would not have any idea how he b) have never had this problem with other devices then why now? Help please

  Hello

  Download and run the Installation Wizard of HP printer from the link below to install the printer wireless.

  www.HP.com/go/Tools

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• Messages does not connect to the Yahoo IM account?

  Messages app v9.2, currently works very well with my Google account and iMessage, also worked with my Yahoo Messenger account, but recently (today?) does not connect to it.

  I know that Yahoo has made changes to their Instant Messaging System. This change affected only Messages?

  Hello

  I can't connect either (I didn't realize that I do not use)

  However going on the Yahoo Site and change the password does nothing.

  With the help of their option 'insecure Apps' does nothing no more (there was an email saying I was using access to messaging through an unsafe application - but I have not used their messaging service for a very long time.)

  It does say read more suggests, is not Mail (after OS X 10.9 is OK)

  He does not on access to their e-mail service.

  There is no option in Messages to try to activate disable SSL you can with AIM or Jabber accounts

  I have looked in the help (a little) but still found nothing.

  

  20:49 Tuesday. October 4, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• iPhone 5 sec Bluetooth does not connect

  My 5s Bluetooth iphone works fine one day, the next day it does not connect to my Boise, helmet or Fitbit.   My Bluetooth is on, I have it enabled or disabled and you have rebooted my phone.  I have updated to IOS 10.0.2.

  I was able to pair with my ipad.

  Hello

  Try the procedure described in this article to support > get help to connect a Bluetooth device accessory with your iPhone, iPad or iPod touch - Apple Support

• Bluetooth does not connect on iOS 10 and sierra OS

  I just bought an iphone 7, Apple Watch 2 and I updated my computer to sierra yesterday.

  I wanted to do the auto unlock with my watch, but my phone does not connect to the Mac with bluetooth. He wants to connect and the phone is displayed in the bluetooth settings, it says on my phone to pair if the numbers are the same, and then he "fails to connect. so im lost and I can't use my watch.

  I have reset my watch (by unpairing), iphone (by resetting all settings) and rebooted my computer.

  It seems that the "it just works era" is over for apple.

  If misery loves company, I'm here!  Just posted my new iphone 7 + setting BLUETOOTH is not 'discover' one of my devices (in 2015 Lexus and Bose radio/speakers).  In addition my iPad and iPad air are also not 'discover' devices!  I think that this happened once I installed the latest ios 10.0.2 software on all my devices.  Please reply if you receive some 'advice' from someone in the "know"!  Thank you!

• I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

  Turn off the new modem for at least 30 minutes. More is better.

  Perform a hard reset on the AirPort Extreme, then it turned off.

  Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

  After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

  Then, turn on the airport and let it run a few minutes

  Set up AirPort Extreme again

  Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.