HP ProBook 4530 s freezes every 30 seconds!

Similar Questions

• iPhone 6s freezes every few seconds on iOS 9.3

  On iOS 9.3, 6 s iphone, the phone will freeze every few seconds in ANY application.  When it thaws (after 3 to 10 seconds), all entries with the touch screen, the home and lock buttons will be running very quickly.

  I tried the following:

  -soft reset

  -hard reset

  -Turning off the night shift

  -activate airplane mode

  -cleaning and restoration from backup

  -downgrade iOS 9.2.1 (seems remedy) and back to iOS 9.3 (back problem)

  It's extremely unusable because typing seems frozen, then a bunch of letters appears when it thaws, pressing the buttons for locking/unlocking inadvertently takes screenshots because it saves that kept pressed buttons, apps are impossible to use, and scroll of sites and application will freeze and then jump down/up.

  See if you can do a reset... it can help him freeze.

  Tap settings > general > reset > reset all settings

  Then, restart your iPhone to test.

  * No data is lost due to reset

• Video freezes every few seconds

  I just bought first elements 14. I bought a subscription to Lynda.com to get up to speed on the program. For several days, the apprenticeship program. So now I'm ready to start editing. I load three videos in the assets of the project. One is a long hours MP4 video which is 6 GB. My system has 8 GB of memory. When I open the video 6 gig in the mower, the video freezes after a few seconds. I tried to put it on the timeline, and it crashes after a few seconds. I tried to cut everything, but a minute or two of the video and it freezes. Then I reduced the resolution of the screen down to 1080. Always freezes. I cut the long video out completely and tried to edit a three minute video. It freezes every few seconds.

  So now I think there must be a problem of memory because of the long video. I left out of the program. Did not save the project. Has started a new project with the short three-minute video. Opened in the window of the mower and began to play the video. It freezes after a few seconds. I'm on Windows 10 64-bit with a processor I7 3.4 ghz. What Miss me?

  Could be the Organizer.

  Just double click in the project window active to import images.

• CC of DreamWeaver keeps freezing every 30 seconds

  I use DreamWeaver CC on a fairly new computer (1 week). Until tonight, everything was working well. Then, suddenly, DreamWeaver has started to freeze every 30 to 60 seconds. It will freeze, mouse still works and other programs always run smooth, but DreamWeaver will stop some text I'm in the middle of typing. Sometimes the text cursor will disappear. Sometimes the title bar will say 'Nor answers', and sometimes the ball spinning blue Windows is displayed whenever DreamWeaver is to the point.

  The computer has two hard drives SSD SATA3 (Windows 7 Ultimate and DreamWeaver CC installed on a disk, and files that I work on are on the other SSD). The computer has Intel i7 3.5 GHz with 32 GB of RAM. I have the running task manager while you use DreamWeaver, using the CPU will never more than 10% and the use of the RAM is never beyond 4 GB, so clearly there are tons of resources available. Only have about 10 tabs open in DreamWeaver.

  Yet once, have been using DreamWeaver great for a week, this problem just started around 21:00 Pacific time Saturday, November 1, 2014. Y at - it a update that would automatically downloaded CC which is buggy? Anyone else having these issues?

  It is unbearable to work like this, as each words couple as I type, the freezing of the program for about 15 to 20 seconds and then comes back to life. No other program that I use for this is not a computer problem. The question is isolated within the DreamWeaver CC.

  Work with local files only, not on the internet or network.

  Please help - having trouble using this program. Furthermore, by using the trial version - so far, not convinced that I should pay for a software subscription based on which prevents me from doing work.

  No new program installed, is not the issue.

  I found the problem. Display solution for all those who may encounter the same problem.

  Timed to this point, and the time between freezes varied and that seemed to be based more on the entry rather than time (anywhere from 40 seconds to a few minutes). The duration of the freeze was always exactly 20 seconds, when the blue mouse icon would turn entrance would be not accepted in DW and the program would fade to white.

  I then noticed that one file was having the issue. I thought maybe it was a corrupted file, so I tried copying it on to a new file, which has not fixed it.

  Then I found the solution:

  In my style sheet tags and script tags, the url was "/ / urlhere.com" instead of "https:// urlhere.com" (added space so that it was not automatically recognized on this forum as a URL.) Once I specified the Protocol in front of "/ /", fixed it. Although I have no idea why, I guess that without the specified protocol, DW search these files locally and gel when he cannot locate.

• get the circular rotation "dots" (and freezing) every few seconds.

  WHEN YOU LOOK AT A SEQUENCE ON U-TUBE (FOR EXAMPLE), THE PROGRAM BREAKS EVERY FEW SECONDS AND THE CIRCULAR SPINNNING "DOTS" APPEARS.

  Hello

  If I understand any video file needs to view must first release all what is common on most of the computer or laptop until you have very high speed internet the watercourses will be lower. Maybe you can try to install different browser as Firefix & Chorme and do check out as well.

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• HP ProBook 4530 s freezes, reinstall the problem with drivers

  Hello

  I have a Hp ProBook s 4530, it is 2 years old.

  Now, I have a very big problem. I was using the pc, then it freezes in the middle of the film.  I reinstalled windows 7 x 64 bit and then I tried to reinstall the drivers, and in the middle of the instalation, the computer crashes again, a black screen appears. I took it to the served and they said that the pc is ok...

  Now I can't install the drivers and the computer is owerheating.

  Help, please

  Hi enigma12140,

  Your device is a commercial device to get your question I would post in the trade forums more exposure. You can do so at http://h30499.www3.hp.com/hpeb/

  Thank you

• Computer hangs every 30 seconds in all programs

  My computer freezes every 30 seconds.  Sound stutters and hesitates the cursor.  Freeze only lasts for 1 second, but this is very embarrassing.  It happens in all programs and at all times.  I have tried several programs fix - it as advanced system of cleaning and difficulty cleaning without result.  I downloaded process Explorer and it shows my use of cpu amounting to a normal 7 to 20 percent when the stuttering occurs.
  I have a Dell Studio XPS 9000
  Intel Core i7-920 processor
  8 mb L3 cache clocked at 2.66 ghz
  8 GB SDRAM DDR3 at 1 066 mhz
  ATI Radeon HD 4350 w / 512 MB
  Windows 7 Home premium 64-bit

  This started about 2 months ago and drives me crazy.  Any help will be much appreciated.  I really don't want to go through the trouble of reinstalling windows 7.

  Original title: freeze momentary

  Hello

  Check with Support from Dell, their online documentation, drivers, diagnostics and ask questions in the forums on
  known problems.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  =========

  Use the startup clean and other methods to try to determine the cause of and eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  above is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Satellite M70-339: playing a video display freezes seconds every 10 seconds

  When I play a video/dvd, etc. display sticks / freezes for a split second every 10 seconds or more. This happens when I have something to play online or one of my own CD. It does on all software (Windows Media, Real Player, etc.).

  It seems to be a driver of anything, but I can't be sure.
  It is certainly very annoying!... and seems to be getting more noticeable. Would appreciate any help I can't find anything else on the web that explains why this happens.

  Thank you
  Jim

  You may need to update the graphics driver.

  But can I ask for more details?
  What cell phone do you have? What operating system do you use?

• Desktop image freezes, I put computer to sleep, he wakes up on his own and picture freezes. I have image change every 5 seconds. How can I fix?

  Desktop image freezes, I put computer to sleep, he wakes up on his own and picture freezes. I have image change every 5 seconds. How can I fix?

  Get a backup full system, like - especially if you use a Mac Pro with 10.6.8 - then your material is more old enough to be at fault.

  Once you have a full backup and up-to-date...  More information is needed:

  What is the freezing of the entire or just computer screen background image?

  Start in Safe Mode and stop and restart normally and see if that clears the problem.

  If you have the anti-virus or anti-malware installed or any tool that claim to clean, optimize or protect, delete all those which, according to the instructions from the suppliers of package.

  Open Console.app from Applications > utilities and look for repeat blocks of diagnostic messages.   Some diagnostics will look alarming, but they are normal and expected.   Looking for blocks that are repeated quickly.   Post an article - usually five or ten lines at most - of any repetition of blocks.   Please do not share more than one or two sections and lines not more than a hundred post or so and please do not post long blocks of repeat messages.

• Why my (wired) laser mouse keeps freezing every 2-5 seconds and then turns off?

  I use Windows XP Professional SP3, and my (Genius NetScroll G500, USB) mouse keeps freezing every 2-5 seconds, until he "dies" (I can't move or something, it's like off). Sometimes, it works normally, sometimes doesn't. I don't really know what causes to keep freezing. This problem does not occur on Linux for now. I download the new updates, but I do not expect any kind of positive results, so please do not respond with driver update. Could you please tell me what to do to fix it properly? Note that the mouse is brand new, bought today.

  EDIT: It seems that Safe Mode fails.

  Hello

  I suggest you to connect the mouse to another computer if possible, and check if the same problem occurs, this is just to check if it is the problem with the mouse.

• Computer freezes for a split second every 3 seconds, the cursor disappears for a split second and the clock freezes and restarts.

  Original title: OS time questions continuum (microfeezes)

  It seems that my computer freezes for a split second every 3 seconds approximately. My cursor disappears for a split second, and because the clock freezes and restarts, it displays a worst time of the day. Audio and video have the same gel splitsecond. The problem persists in safe mode. Dell Inspiron 1520, servicepack2 of vista running. I've never had any problems with this machine. Here's a video I took of the number: http://youtu.be/fbUeK8U7wHw

  I would like to know if there is other info/specifications that could be useful.

  Thank you.

  Good,

  1:
  Updated the chipset drivers even though it said I was with the best.

  2:
  Run a SFC scan, which revealed no violations of integrity or files not repaired.

  3:
  five hours and 8 infected files later, my computer is totally cleaned.

  I opened the event viewer, but I don't know what I'm supposed to be looking for. There are many changes to the machine because it began to act up, which were intended to correct the problem. I installed the Service Pack 1, then 2, scan MS Safety and new chipset.

  I also ran a memory diagnostic, but all was well.

  What should I look for in the event viewer? I know that the problem started in a 12 hour window. Should I save and post the logs at the time?

  There is a certain mystery. We need Sherlock Holmes.

  -UPDATE

  I have reset the system to its factory settings. Now, it's as if it were new.

  The problem persists. He still hiccupping. It freezes again for a few milliseconds about once per second. And I'm going crazy.

  UPDATE 2-

  The computer was closed for about 12 hours and when it restarted and Windows initialization complete, the problem disappeared. It works normally for a vintage computer 2007. I'll let you know if I learn more.

• First cc pro FREEZES every day and I have to FORCE QUIT and restart... sometimes only seconds apart. Super frustrating. a fix?

  First pro FREEZES every day and I have to FORCE QUIT and restart... sometimes only seconds apart. Super frustrating. a fix?

  I'll be edditing and first pro will freeze comes all of a sudden. It will not release little matter how long leave you it. I have to force quit and restart my project and I lost some work I did not save. It happens sometimes only every 30 minutes... Other times every 15 min other times every 20 seconds.  It happens every day... Its been doing this for at least a month. Any help? Someone else has the same problem without solution.  The computer's specifications are as follows:

  IMac

  OS X Yosemite (10.10.2)
  Processor: 2.8 GHz Intel Core i7
  Memory: 16 GB at 1333 MHz DDR3
  Graphics card: AMD Radeon HD 6770 M 512 MB

  I have removed all malware from my computer and first pro cc is up-to-date.

  I started using CC a little back and have done most of the work on this project in CC. I think I can finish it in first pro cc. At the moment I have the project queue upward and make... Its takes a while, but I think it will work. The question knowing brings me great relief! I was worried that it was just a problem with the first. Thank you very much for your help! This problem is solved!

• HP ProBook 4530 s has strange periodic buzzing from the speakers

  I recently bought a HP ProBook s 4530 and I am now a regular buzz (about every 30 seconds or more) from the speakers during playback of any media. The system has Windows 7 Professional 32-bit with a card IDT High Definition Audio CODEC installed. No error message is displayed and all drivers are newer and work would have been properly. I had no problem for the first two weeks, then allof it suddenly appears. I j. River Media center installed, and the problem appeared all first when I played the music. I finally found a solution by changing the default value in the media player of mp3 to WASAPI. But it does nothing to affect the noise from other sources. The sound also goes to speakers only when certain applications (local and internet) are released for a short period. Any help will be most appreciated.

  Hello

  In my opinion, you should disable hp power assistant configuration (msconfig) system service.

• Distortion of the sound every 20 seconds on Satellite C

  When listening to audio with and without a helmet, every 20 seconds or so the output sound is deformed for several seconds and in some cases this sound distortion also causes computer to freeze completely display.

  My PC is a Toshiba Satellite series C running Windows 7.

  Any suggestions please?

  Please be so kind and post some info about this noise problem.
  Are you using the original pre-installed OS that you got with your laptop?
  Have you noticed this problem on the first day?
  Have you noticed this problem whenever you hear the music and watch movies using different actors?
  With other words, it's a kind of general problem on your laptop?

  When this happens you noticed most high HDD activity in the background (System analysis, installation of updates or something similar)?

• 3d driveguard and HP Probook 4530 s

  Hello

  I recently put HP Probook 4530 s. I'm running Win7 Ultimate 64 bit. I have two questions for the same thing.

  1. I installed all the drivers and it works well. But I noticed that there is still an unknown device and Hardware ID "HPQ0004" I think it is for reinforcements to drive 3D. So is it really necessary? In fact it will be useful in the case of the laptop falling or accidental damage? This will affect the performance of my laptop?

  2. There is a USB 3.0 to this laptop. Recently I bought external hard drive Seagate GoFlex (500 GB). They say that it is possible to upgrade to 3.0. Can anyone tell me that how can I use this drive on the USB 3.0 port to get the best speed of transfer? Is there any software to upgrade my external drive to 3.0? How can I do?

  Thank you.

  Kind regards

  Natasha

  Hi, Natasha:

  Yes, I'd install the driver of driveguard protection.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 3688868 & prodNameId = 3688870 & swEnvOID = 4059 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-81492-1

  I can't answer your second question.

  Best regards

  Paul