HP probook 4530 s: ram upgrade

Similar Questions

• ProBook 440 G2: RAM Upgrade will void the warranty?

  Hello

  After a lot of dilemma, I buy THISlaptop.

  My main concern is the "on-site 5-year guarantee" it comes with.

  This laptop has now only 4 GB of RAM. I want to add an another 4 GB myself.

  In doing so, it will take Bay opening to service the laptop.

  Open myself for a RAM upgrade will void the warranty?

  In addition, no one knows how much total RAM this computer supports? How many slots is there?

  The page of the product didn't.

  I tried to contact HP technical support by email, and I have to enter a serial number to reach them. I entered the serial number of my laptop current (and also a probook), but I think that the agent did not read my email properly. Instead of answering my question, he sent me a link to extend the warranty on my laptop today.

  Thank you...

  Hello

  According to the Manual, it has 2 slots:

  

  See Page 2, 3, 47, 48, to get the instructions before and during the replacement process. Even if it is a simple procedure if you do not have confidence in replacement, it gives to the HP service center, they will do it for you. Opening the door to service memory will not void the warranty - but if you daamage something in the replacement process, it will void the warranty.

  Please get the exact configuration and preference of the same brand (like this one in the slot) of RAM, mentioned in the manual.

  You can run this toolto know the details of the installed RAM sticks & moving forward with the purchase of od sizes appropriate sticks needed to make it to 8 GB in total.

  Concerning

  Visruth

• ProBook 4530 s: ProBook 4530 s RAM speed

  Hi all

  I ProBook 4530 s i3 with 2x2gb 1333 mhz ram, but I want to switch to 2 x 4 GB 1600 mHz. I was wondering can my motherboard run with 1600 mHz or will downclock my 1600 mHz ram at 1333 mHz? And if you can tell me what is the model of my motherboard.

  My model is QJ763AV.

  Best regards!

  Memory SDRAM DDR3 PC3-10600 (1333 MHz) SODIMM two slots supported dual channel 1 GB, 2 GB and 4 GB SODIMM memory

  Expandable to 8 GB with SODIMM 4 GB maximum

  Page.9

  http://WWW8.HP.com/h20195/v2/getpdf.aspx/c04288440.PDF?ver=25

• ProBook 6440 b: RAM upgrade Question

  Help! I just bought a refurb Probook 6440 b. Only, it came with 2 GB of memory, so I bought an upgrade to 8 GB. However, I can't find any instruction DECENT on the replacement of the RAM. Is there something there?

  @DPChristman

  Step by step remove/replace HP videos here.

  http://h20464.www2.HP.com/results.htm?SID=4095207&MEID=9F975FCA-55BE-47E5-B748-F0BEDAC5B948

  REO

• HP Probook 4520 s Ram Upgrade information

  Hello

  I use HP probook 4520 s that has 2 GB of ram ddr3. I want to add 4 GB of ram. What ram I need to buy, I mean technical details? Here's my current info of ram 2 gb of ram?

  Type of DDR3 memory
  Format of SO-DIMM
  Manufacturer (ID) Micron (2 00000000000000) Technology
  Size 2048 MB
  Bandwidth Max PC3-10700 (667 MHz)
  Number of banks 8
  Nominal voltage 1.50 Volts
  EPP no
  XMP no
  AMP no

  Now that 4 GB of RAM should I buy? also suggest the brand please.

  Thank you

  Hello

  You can buy from the following vendor, or use the information to buy elsewhere.

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/HP+business+notebooks/ProBook+4520s-upgrades.html

  If your computer runs 64 bit OS, you can buy 8 GB (cheap) or you can buy 2 x 2 or 1 x 1 GB if you wish for 32 bit OS.

  Kind regards.

• ProBook 450 G2: ProBook 450 G2 - RAM upgrade

  Hello

  where can I find a list of compatible hardware for my g2 450 probook? In another thread, the link to the manual no longer works.

  I already bought a kingston 4 GB ram pc3-12800 sodim, but memory is not admitted by the laptop.

  Thank you.

  @Berthold1978

  I just tried the new version and the older version, and both do not work.

  This happens from time to time.

  Give it some time and try again.

  Your manuals here.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/manualsResults/?sp4ts.oid=6943826&spf_p.tpst=psiContentResults&spf_p.prp_psiContentResults=wsrp-navigationalState%3Daction%253Dmanualslist%257Ccontentid%253DService-and-maintenance%257Clang%253Den&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Your videos to remove/replace here.

  http://h20464.www2.HP.com/results.htm?SID=6943826&MEID=BFEAE0A5-A6BD-4541-BA9F-32A9F9567EFA

  REO

• HP Probook s 4710 Ram upgrade

  Hello I have a proobook Hp s 4710 with win7 ultimate 64 bit and I want to upgrade my Ram.

  Currently, according to CPU - z I 2 GB 800 MHz. By searching hp.com and the net I discovered that some 4710 s take other ddr3 and ddr2.

  So I chated with an HP expert 2 weeks ago and he said that my laptop run maximum 8 GB at 1333. And I went bought 2x2gb 1333...

  When I tried to install that I fell on a DDR2 socket! Obviously, the ddr3 was not appropriate in this medium.

  So my question is---> what is happening? Everywhere I look on the Net some say DDR2 and DDR3 of others. How is that possible? The laptop has other modules Drr3 media I did not find?

  My S/N {retired privacy} and P/n is NX629EA #AKD

  Please help because I'm depserate!

  Hello

  Thank you very much for the link, I don't really know what is happening here also. It says on page #3 DDR2 but on another page (s) he says DDR3. The manual also shows DDR2 as in my previous post and you have discovered it only supports DDR2. Maybe more later models supported DDR3. Anyway, back to your question, I know Crucial RAM works but don't know others. I'm sorry.

  Kind regards.

• ProBook 4530 s: upgrade Probook 4530 s processors

  Hi all

  I have a B5N72UT Probook 4530 s age of 4 years which is very dated with his 2nd gen Core i5 processor to 2450 m. However, there is a good HDD of 750 GB. And the processors are removable, Ive double/triple checked.

  I seek to speed up a bit and have been doing some research but still need some answers.

  (1) it seems that almost all trade of parts of 4530 s models, is that true?

  (2) if so, then can I replace the i5 - 2450 m 2-core with 4 - core i7-2630qm?

  -L'i7-2630qm came in some models of 4530 s, I checked.

  (3) then there are 2 RAM slots. HP says max RAM is 8 GB. While that Intel says i5 - 2450 m and i7-2630qm can handle 16GB. Can I go the road of 16 GB or am I stuck at 8 GB?

  (4) if all other parts are interchangeable, so I guess I can shoot for the BluRay / DVD + RW drive other models right?

  (5) Finally, as I can change the processor, can I go to a 3rd, 4th, 5th or 6th gen Core i5/i7 processor?

  Sorry for all the questions. I did really want to buy a new laptop with all the specs I need, I would rather that I upgrade and get a lifetime of my Probook. The answers would be great.

  Thank you

  Here is the Service Manual:

  Manual

  I7-2670QM is highest CPU and it will fit in your motherboard.

  Max RAM is 8 GB.

  Yes, you can install a Blu - Ray player instead of the DVD recorder. You can even get a generic drive and just change the front plate and mounting hardware.

  You are limited to the 2d gen Core processors.

  If you want it to be faster, consider a SSD drive. Overall, this will be the best upgrade you can do. Post back if you need more help with it.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Maximum RAM for HP Probook 4530 s

  After you have correctly reinstalled my 4530 s using a Provost in this community, I want to upgrade my 2 X 4 GB RAM installed with 2 X 8 GB.

  I did find if this is possible in any technical data.

  I have the latest firmware BIOS installed.

  Web page determinative this seems not possible however

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/HP+business+notebooks/ProBook+4530s-upgrades.html

  Product: XX953EA #UUW

  Tvesala wrote:

  After you have correctly reinstalled my 4530 s using a Provost in this community, I want to upgrade my 2 X 4 GB RAM installed with 2 X 8 GB.

  I did find if this is possible in any technical data.

  I have the latest firmware BIOS installed.

  Web page determinative this seems not possible however

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/HP+business+notebooks/ProBook+4530s-upgrades.html

  Product: XX953EA #UUW

  Hello

  I checked the service guide and he stated that the possible maximum memory is 8 GB of RAM.

• Upgrade processor HP PROBOOK 4530 s

  I have hp probook 4530 with processor i3 - 2310 m and I want to improve its intel core i7-3840qm processor if it works or not? and the mirror thing to his superior or not matter because my processor at its top square mirror but the i7 have a rectangular? and does it come in a box if it's what comes inside?

  Thanks man but I have a lot of research and I think the i7 2670 works but I will buy it on ebay and he an expert do not take to the hp Support Center does take a lot of importance?
  Another issue I should update my BIOS of f.09 to a version more recent?

• 3d driveguard and HP Probook 4530 s

  Hello

  I recently put HP Probook 4530 s. I'm running Win7 Ultimate 64 bit. I have two questions for the same thing.

  1. I installed all the drivers and it works well. But I noticed that there is still an unknown device and Hardware ID "HPQ0004" I think it is for reinforcements to drive 3D. So is it really necessary? In fact it will be useful in the case of the laptop falling or accidental damage? This will affect the performance of my laptop?

  2. There is a USB 3.0 to this laptop. Recently I bought external hard drive Seagate GoFlex (500 GB). They say that it is possible to upgrade to 3.0. Can anyone tell me that how can I use this drive on the USB 3.0 port to get the best speed of transfer? Is there any software to upgrade my external drive to 3.0? How can I do?

  Thank you.

  Kind regards

  Natasha

  Hi, Natasha:

  Yes, I'd install the driver of driveguard protection.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 3688868 & prodNameId = 3688870 & swEnvOID = 4059 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-81492-1

  I can't answer your second question.

  Best regards

  Paul

• HP Probook 4530 s fingerprint reader does not.

  I just bought HP Probook 4530 s Ci5

  6 GB of RAM

  740 GB hard

  1 Gb Radeon graphics card

  Win7 64 bit operating system

  I downloaded the driver and digital persona software from the HP Web site, my system Device Manager shows that the driver is correctly installed (called devices biometric, and under it Validity sensor, its listed version is VFS471). But on windows log on that is showing and then Player Detection is not detected. Same thing is happening in the software (digital persona). I tried different software in different websites.  Please indicate if you know something NEW. I said something new because I saw many people on many sites looking for this problem. But the problem is there.

  When I run the validity sensor driver installation, it will install fine.

  Then I run the last digital persona software it says on his system ("the system cannot check that the fingerprint readers is installed"). And that this is an option to SKIP this part. When I do, it completed the installation and restart the computer. After that the same problem "drive not detected" on windows to connect.

  Hello

  Uninstall the driver and the software for reader fingerpint.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Download and install the driver prints digital validity here.
  Download and install HP ProtectTools Security Manager here (inside this package, it is a software for fingerprint reader).

  Restart the system and check the results.

• ProBook 4530 s: drivers missing

  Hey!

  I have similar problem as this guy
  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/missing-driver-for-quot-base-Sy...

  It's a HP Probook s 4530 with processor intel i5 2450 M, 4 + 2 GB of RAM and switchable graphics (intel HD and Radeon 7470 M).

  My graphic card driver guard crashing when I try to play a game (summer do BSOD with THREAD_STUCK_IN_DEVICE_DRIVER and WHEA_UNCORRECTABLE_ERROR). Resources and performance monitor gives me 2 errors on drivers is not installed:
  -Win32_PNPEntity.DeviceID="PCI\\VEN_197B&DEV_2393&SUBSYS_167C103C&REV_30\\4&2CE17296&0&03E2".

  -Win32_PNPEntity.DeviceID="PCI\\VEN_197B&DEV_2392&SUBSYS_167C103C&REV_30\\4&2CE17296&0&00E2".

  The Device Manager shows my basic system devices do not installed the drivers. One is "PCI Slot 2 (36 PCI bus, device 0, function 3)" and other "PCI Slot 2 (bus PCI 36, device 0, function 0).

  P.S. I can't find my phone on your Web page so I'm not really sure of what to do about these drivers. If I search for Probook 4530 s I get 3 different results and I don't know which one is right, and if I search by product number I get some computers laptops Pavilion as a result.

  Hello

  Please try:

  JMicron card reader Driver
     http://ftp.HP.com/pub/SoftPaq/sp52001-52500/sp52344.exe

  Kind regards.

• Need a dual band card WiFi AC for Probook 4530 s

  We have several laptops ProBook 4530 s (less then 2 years) in our society (product # A7K05UT #ABA) provided with stock simple strip cards and will not recognize the 5 ghz band.  I have a 5 yr old DV5 which has an Atheros card that recognizes them both and a DV7 new desire that I just put an Intel card in which works perfectly.

  When we put the Intel card in the Probooks - at startup, BIOS flashes instantly that it will not recognize the card with a 702 error.

  I can't believe that HP would be intentionally block the ability to update their products.  The ProBooks run the latest BIOS Upgrade and have no driver card dual band listed.

  Does anyone know a double card strip 2 x 2 with BlueTooth that works?  Or y at - it an easy way to unlock this paralyzed from the BIOS?

  If this upgrade problem cannot be resolved - looks like we get a different provider of portable computers.

  All THE news will be welcome.

  Thanks in advance.

  Hello:

  Yes, unfortunately, there is a BIOS "whitelist" on this model that locks the unsupported cards.

  HP seems to have put an end to this practice recently (maybe in the last year or so), as consumers have indicated being able to install any model wireless card they please.

  This helps any questions with the 4530 s.

  According to the maintenance manual, Chapter 3, the card only dual band with BT that works is the Intel Centrino® Advanced-N 6230 - HP 636672-001 part number.  This isn't an AC card.

  Due to the restrictive nature of the BIOS, you should also get this card with HP number thereon, or it won't work.

  I checked the HP part store for availability, and HP has more article for sale, so my recommendation would be to look on sites like eBay and query by part number and buy a card used, but tested and functional.

  Specifications on the Intel 6230...

  http://www.Intel.com/content/www/us/en/processors/Centrino/Centrino-advanced-n-6230-brief.html

  I have no idea how to hack BIOS to get any wireless card to work.

• HP ProBook 4530 s: igdpmd64.sys BSOD on HP ProBook 4530 s Windows 7 64 bit

  I used my HP ProBook 4530 s with 64-bit Windows 7 and Internet Explorer 8 (IE8) installed for 2011 with no problems.
  Recently I upgraded Windows SP1 and IE10. Everything works well except one thing.
  When I run IE10, open a few tabs and hoover my mouse on the icon IE10 so that it shows the small windows semi-transparent my PC crashes.

  It shows the blue screen with PAGE_FAULT_IN_NONPAGED_AREA message caused by the igdpmd64.sys driver.

  (1) I found in the HP forum post "BSOD on HP Envy14t igdpmd64.sys".
  I followed the recommendation of uninstall KB2670838.
  However after restart of PC the IE10 disappeared and IE8 is back to life.
  I've updated Windows then tries to block the installation of KB2670838, but it was impossible since KB2670838 was not indicated on the list but somehow "installed in the background.
  So I was at the point of "all works fine except one thing.

  (2) I found another post on the forum who recommended to upgrade the driver igdpmd64.sys.
  I went to: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5060881&swLangOid=8&swEnvOid=4058
  Choose: Drivers - Graphics (3)
  Downloaded the new Intel Graphics Kernel Mode Driver 8.15.10.2559 2012-02-22
  However during the installation process, I received a message (2A):
  "This computer does not have the minimum requirements for installing the software.

  I called HP support who advised to install the previous version of the driver.
  I did, but got the same message (2A)

  I called HP support once again who advised to install the driver from the Intel page.

  (3) I went to: https://downloadcenter.intel.com/search?keyword=Intel%c2%ae+Q45+Express+Chipset
  Downloaded: Intel® Graphics Media Accelerator Driver, Windows 7 * 64, Windows Vista * 64 (exe)
  version of the driver 15.17.19.64.2869 (8.15.10.2869) for Intel® integrated graphics.

  However during the installation process, I received a message (2A).

  I have no more ideas. Could someone help me please?

  Best regards

  Sylwek

  I know it's weird that I reply to myself.
  HP support advised me to install the ATI video driver and Control Panel

  to:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060881&swItemId=ob_101995_1&swEnvOid=4059#tab1

  He helped :-)

  Thank you HP support Poland