OfficeJet pro 8610e: scan resolution 8610

Similar Questions

• OfficeJet Pro 8625: Officejet Pro 8625 scanning Resolution

  Please guide me through to get to a different scan resolution.  I have changed the settings in Word and went from 200 X 200 to a maximum of 300 X 300.  Card saying that I should be able to get up to 1200 X 1200.  What I am doing wrong?  Also tried Excel, using the scanner on the printer icon HP Desktop (vs using the screen on the printer).  Same question if vs color B & W.  Is it a matter of winning 10?  No work around?

  You scan the glass or the ADF?

  Please try this solution to scan to see if it solves your problem.

  HP extended Scan
  
  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi for Windows.
  
  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

  Make searchable PDF scans for free - https://www.naps2.com/

  Let us know.

• OfficeJet Pro 8610: HP OfficeJet Pro all-in-one 8610 do not print each attempt

  HP OfficeJet Pro all-in-One 8610 print intermittently

  11/09/2016

  This is a request for additional assistance from HP, Apple and AT & T Community Forums

  Machines and affected software:

  Printer HP OfficeJet Pro 8610 e - All - In - One.

  Serial number: CN4CNE3463

  Last updated: 06/09/16 (Version 5.0 (4.1.1 P, S; 5.17.1 F).)

  iMac 21.5 inch late 2009 (daily use)

  Serial number: W89415S5PC

  OS X El Capitan: Version 10.11.6

  MacBook Pro 13.5 inch late 2009 (occasional use)

  Serial number: W8942UW766D

  OS X El Capitan: Version 10.11.6

  MacBook Air 13.5 inches mid 2012 (daily use)

  Serial number: C02HX3ZADRVC

  OS X El Capitan: Version 10.11.6

  Wireless router: AT & T U-verse ARRIS NVG589

  more AT & T Wireless Access Point VEN501 device

  Wireless Router Range Extender: Linksys RE6500

  Multipoint unresolved printing problem:

  HP OfficeJet Pro 8610 had printed out successfully all the three above mentioned computers since the purchase of the 04/04/2015. End of August 2016 he started intermittently refusing to print wireless, sometimes do not connect wireless or holder from job to job.

  09/06/16 I posted the question on the Forum of community HP between 07/09/16 and 08/09/16 had dialogue on possible solutions. I followed the Commission received and interpreted it following recommended tasks - all without result:

  (1) sequential power off and cord power to the router Range Extender, OfficeJet 8610 Pro and iMac and removal after 60 seconds of powering the devices in the same order. Result: would not print.

  (2) off wireless to iMac. IMac connected to a printer via an Ethernet cable. Printer would not print.

  (3) tried to scan the printer for iMac's wireless: would not scan.

  (4) tried Scan via an Ethernet cable from the printer to iMac: Scan worked.

  (5) connecting iMac via an Ethernet cable to the router and printing system reset iMac to remove the printer and then added printer as directed by its name: HP OfficeJet Pro 8610 [455491]. The results have been mixed:

  (a) wireless to iMac to the router and Ethernet cable router for printer: test page printed.

  (b) the iMac to the router and wireless router for printer: test page will not print.

  08/09/16, having nothing specified by HP Community Forum, I contacted AT & T, the provider of my router and all my services (wireless, broadband, Internet, fixed phone) for the Support service.

  AT & T: recommended

  (1) make a new Setup wireless printing HP itself using my secure wireless network name and password, and then perform a reboot of the router. Between the two actions (new set-up and router reboot), the printer starts and print a previously submitted test page. To confirm that the printer was actually working, I turned off the printer, waited, he turned back and tried to print Test page: the page not print.

  (2) AT & T then told me to do a new manual of the printer setting. Just as I got Set Up on the screen of the printer, the printer prints the Test Page.

  AT & T told me that the printer should work fine now.

  Once I have shut down my system and restarted the 09/09/16, I found that I could not print anyway:

  Wireless to the router for printer

  Wireless to the router and Ethernet cable for printer

  Ethernet cable to the router and wireless to a printer

  Ethernet cable for printer

  Another experiment on 11/09/16 led to erratic printing depends on the original machine:

  1 iMac for HP printer: wireless printer for iMac gives not the Page of Test sent for printing, but a series of blank pages, followed by several pages of code and followed by more white pages. Code pages are all the same and then talking about the Cambria police (body).

  a. the first pages all State: %! PS-Adobe-3, 0% APL_DCS_Encodiong: UFT8% APLProducer: (Version 10.11.6 (Build 15 1)

  b. human beings second page with: 14 start/FontName dict / TJOLUV+ def Cambria

  Page 2 on three subsequent print reading attempts the same as above, except for a different set of letters before "+ Cambria". A UAXKPA, a JJCFBS, and the third is WOKHHG.

  2. yet, when I tried to print the Test Page of the MacBook Air and MacBook Pro wireless, printing is successful (i.e., the test page prints and do not print pages blank and coded.

  I'm sorely need a remedy to this overall situation.

  • What is originally intermittently, the HP printer?
  • What is originally a wireless printing and Ethernet to vary?
  • What is causing the iMac to print Virgin and code pages when the MacBook Air and MacBook Pro both print pages "regular"?
  • The question one demanding a new router?
  • DOE the question indicates the need to uninstall the printer and then perform a reinstall?
  • With all machine software updates could be software problems cross machine?

  Link to the firmware.

• HP Officejet Pro 8600 scans appear in white

  Hello

  My HP Officejet Pro 8600 scan correctly, either from the document feeder or the dish. The scans appear almost totally blank, although some weak contours are barely visible along the top. Two computers use the scanner (Mac OS X 10.6.8 and 10.7.5) and both have the same problem. Any suggestion would be great!

  Hi ABverr,

  A hard reset can solve this problem.  To do this, unplug the power cord at the back of the printer when the printer is still on.  Unplug the other end of the power cord.  After 60 seconds, plug it directly into a wall outlet, and then plug it into the back of the printer.  Try a scan.

  If this does not help, I linked a document with measures to correct the problems of quality of scanning.  Click here

  If the problems persist, you can download and run printing HP and doctor Scan.  Click here  Let me know the results.

  Good luck!

• HP Officejet Pro e-all-in-8610: scan to email

  I got my printer put in place so that I could scan something to my personal e-mail but my password recently changed on my email account, so it is no longer lt me scan.  When I try it says the password is incorrect, but I can't understand how to change the password in the printer so that it can connect again.  Help please!

  Spoiler (Highlight to read)

   

   

  Hi @lmdant02,

  Thank you for joining the HP Forums!

  I understand that you can't replace your password with your HP Officejet pro 8610 e-mail scan and I am happy to help you!

  Use the built-in webserver (EWS) to set up scan to email.

  NOTE:

  During the process of setting up profile, you may be prompted for the name of the SMTP server, SMTP port number or authentication information. You can contact the electronic/Internet mail service provider or system administrator to get the information. SMTP server names and the names of ports are usually easy to find by doing a search on the Internet. For example, to use terms like 'the gmail smtp server name' or 'the yahoo smtp server name' research.

  1. In the Dock, click HP utility.

     • If the HP utility is not on the dock, follow these steps:

       1. Double-click your hard drive.

       2. On the left, select Applications.

       3. Double-click the HP folder.

       4. Double-click the HP utility.

  2. Click Scan to E-mail, and then click on Start scan to E-Mail Setup. The integrated Web server opens in a new window.

     NOTE:

     If you get a message saying "Safari cannot verify the identity of the site", click on continue.

  3. Click the scanning tab, and then click Scan to E-mail Setup.

  4. Click outgoing e-mail profile.

  5. Click new and then enter your email address.

  6. Enter a name to display the control panel of the printer to identify the profile of this email.

  7. Enter or confirm the appropriate SMTP server and SMTP port information.

  8. If you usually have to enter a user name and password to connect to your e-mail account, enter this information in the fields of electronic authentication.

  9. Click Next.

  10. If you wish, enter a PIN to restrict access to this e-mail security profile.

  Source: analysis of the Panel (computer, email, MEMORY or network folder).

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this information helps!

• OfficeJet Pro 8620: HP OfficeJet Pro 8620 scan low resolution

  According to the specifications of the OfficeJet Pro 8620 offers a resolution of up to 1200 dpi scanning, but the scan software offers only up to 300 dpi. How can I scan at a higher resolution than 300 dpi?

  Thank you for your response.

  Hello

  Automaric document feeder allows scanning up to 300 dpi, to analyze higher resolutions, you will need to use the glass flat.

  Place your document on the glass and open the HP scanning software, change the source as glass flat instead the default (use ADF if loaded), then you will be provided with the option to select a higher resolution.

  Kind regards

  Shlomi

• HP Officejet Pro 8610e: cannot print documents I scanned and saved as pdf files

  All of a sudden I cannot print I scanned and saved as pdf files.  I get a message indicating that the printer is "Impossible to convert the PostScript file.  Don't know how to handle, but I have to be able to print the docs I'm scanning and saving in pdf format.  Can someone help me?

  Thank you

  GTR

  Hi @GTR3,

  Welcome to the Forum from HP Support.

  I see that you are unable to print the PDF scanned documents with your HP Officejet Pro 8610 e-all-in-one printer. I would like to help.

  You are able to print any other format PDF on the Mac, or the question is just limited to your scanned PDF files? Whether the soft friendly PDF work with - Adobe Reader or Foxit Reader?

  In the meantime, I recommend you try the following steps:

  • Uninstall your printer - click here for instructions.
  • Fix permissions of the disc on your Mac - click here for instructions.
  • Once you have finished running the utility above, restart your computer.
  • Finally, click here to reinstall your printer.

  Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support. Have a great day!

• HP Officejet Pro e-all-in-8610: HP Officejet Pro 8610 - error Code: "0xc19a0013" (printhead missing or failed)

  I bought the printer (e-all-in-one printer HP Officejet Pro 8610) in January 2015.  The printer was working properly - fax, copy and scan, until two days ago.  Now, it doesn't print at all.  Received an error code: "0xc19a0013" (missing or does not have the print head).  An expanded version of the error code reads: "the print head seems to be missing, not detected, or incorrectly installed.  Error: 0xc19a0013.   The printer uses a removable printhead, HP Ink cartridges (black) 950 and 951 (cmy).  I used the diagnosis of HP support recommendations: all software and firmware for this printer is installed. HP ink cartridges are not low or empty; remove the printhead ink cartridges and reinstall them.

  There are several steps in the recommendation of troubleshooting, but I stopped to lift the printhead.  Because of my technical inexperience, and there were too many ceveats (attention, attention, proper relocation and etc..)  with the removal of the print head which could cause problems more serious.  Then, I stopped to remove and clean the print head.  Also, used the doctor to Scan printer HP for assistance. Tool to clean the printhead does not.   What worries me most with the 0xc19a0013 error code is his explanation: the print head seems to be missing, not detected, or incorrectly installed.  I can use all the help I can get to understand what is happening with the error code that I received and the resolution of the printer malfunction.

  Contact HP technical support at the 800-474-6836 for more options.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  Language-country selector.

• HP Officejet Pro e-all-in-8610: determination of applicability of the critical Security Bulletins

  How can I determine if a "support alert" applies to the HP Officejet Pro 8610 e-all-in-one printer I own?  Since the purchase and registration it two months ago (March 2015), I received two "Support alerts.  How will I know if they apply in fact to my printer?  I'm "naïve."

  05/03/15: 

   Critical security bulletins - 05/03/2015
  HPSBPI03107 rev.2 - some HP LaserJet printers, multifunction and some HP OfficeJet company printers using OpenSSL, remote access not allowed 
  http://alerts.HP.com/r?2.1.3KT.2Zr.160zkK.LidCFu..H.iGk4.8r9Y.bW89MQ%5F%5fDELAFQb0
  Content type: printing and imaging
  OS: ALL THE

  17/04/15:  

   Critical security bulletins - 18/05/2015
  HPSBPI03322 rev.1 - HP, unauthorized access Local access control software 
  http://alerts.HP.com/r?2.1.3KT.2Zr.160zkK.LzjMyg..H.j4ho.8wYC.bW89MQ%5F%5fDSKaFUW0
  Content type: printing and imaging
  OS: ALL THE

  @hay3911

  Welcome to the Community Forum of HP.

  It seems none of them apply to your printer.

  I opened the two opinions:

  • The first notice does not list your printer - does not apply.
  • The second notice, although completely obscure in its formulation, provide a local patch page.  I clicked on that and was redirected to the Support page.  The name of the Patch is still a mystery (no surprise); I clicked on the drivers and software link (this page) and the result did not show anything about your printer / product - does not apply.

  These opinions are a bit hard to read sometimes.  You are wise to consider and track them.  There is always the chance that you could get something that you want to act.

  You can always open the Support of your printer Web site and take a look here to see what is available on this page - most of the time is there is a alert there is a notice on the Page.  At the very least, you can scan drivers for updates that might be relevant.

  Series of printer e-all-in-one-HP Officejet Pro 8610

  Always create a Restore Point before making any changes to your software!

  Overview of the system restore

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Hardware scanner of HP Officejet Pro 8600 Plus resolution

  Hello

  is the resolution of scan material of HP Officejet Pro 8600 really 4800 x 4800 dpi, as it is claimed, or it is made by the software? Thank you.

  Hi Joe1_vm,

  Yes, max scanning resolution is 4800 x 4800 dpi scanning application software.

• 8600 Officejet pro 911: scan has stopped working

  My scan just stopped working and givee me a message, the printer is not connected to the computer.

  I turned off the computer and the cable and the printer turned on again but did not help.

  Instructions say click the HP and select the scanner action. But when I click on the hp icon I get only an option to install a new printer. Nothing else.

  How do I get this reconnected?

  Hello @skybyrd53,

  Welcome to the Forums of HP Support!

  I would like to work with you today with the resolution of the problem of scan that you encounter when you try to scan from your HP Officejet Pro 8600 e-all-in-one printer to your computer Windows 8.1. I understand that when you click on the HP printer Assistant icon you get a screen "install". This indicates that your software is here and ready to work, but your printer is no longer bound to this software. For this reason, I will guide you through the steps for reinstalling your device to fix software problems and the pilot. Please follow the steps below.

  Step 1: Uninstall the drivers:

  For the purposes of troubleshooting, it is important that we have a clean slate to work with. So, I'll you delete everything Officejet software and drivers on your computer.

  1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard to the right of the Ctrl key
  2. When the splash screen opens, type programs and features. Click on programs and features to open it.
  3. When the programs and features opens a list of the programs installed on your computer will populate. Scroll down the list until your see HP Officejet 8600. Select the HP Officejet device and click Uninstall
  4. Follow the instructions on the screen to complete the uninstallation of your product.

  Once the Officejet has been uninstalled successfully, please proceed to the next step.

  Step 2: Remove temporary files:

  1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard to the right of the Ctrl key
  2. When the splash screen opens, type run. Click on Run to launch the run dialogue box.
  3. In the run box, type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder when it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 3: Reinstall the drivers:

  1. Please click here to download the latest drivers for your HP Officejet
  2. Once the site opens, please click on the download button at the top left
  3. If you are prompted, please allow the download to run
  4. Once the download is complete, please follow the instructions on the screen to reinstall your printer.

  Once your printer is reinstalled successfully, please try scanning and printing to confirm that everything is working properly again. If your printer is unable to install because it is not 'detected' when installing, please let me know how your HP Officejet is connected to your Windows computer (USB, Ethernet cable or wireless).

  Please reply to this message with the result of your troubleshooting. Good luck!

• HP Officejet Pro 8715: scan to separate files

  I want to scan a stack of documents with the autofeeder, and each document in a separate PDF file.  Is this possible on a printer HP Officejet Pro 8715?

  Thank you.

  Hello

  He doesn't know how many pages on the first document and the second one... so he can't do the job. There are few options, the following is a good software:

  http://www.PDFSam.org/downloads/

  I usually use PDFSAM ( Split hasnd Merge PDF) divide after a big scan OR to extract a chapter of a thick book. I also use it to combine/merge some small PDF files to a larger file.

  Please download the basic version, it's free. You have to pay to use the other version.

  Kind regards.

• HP OfficeJet Pro 8600: Scan - disable the 'Save' button with MAC OS 'SIERRA '.

  Hello world

  I have an Officejet Pro 8600 installed in a Macbook pro.

  After having upgraded to Mac OS Sierra (10.12) 'Save' button in the HP scanning software is now disabled when the save screen appears. Save documents are possible using the 'Test' option in the menu "Preferences".

  It worked fine with the latest version of 'El Captain'.

  I've searched for scanning HP new version for Mac OS Sierra, but nothing.

  Someone has any idea how to solve this problem?

  TKS in advance.

  Hello
  The HP scanning application is not compatible with Sierra, so you may experience problems.
  Remove the HP scanning by moving it to the trash, then empty the trash.
  
  Instead install HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.
  
  Kind regards
  Shlomi

• HP Officejet Pro 8620 - Scan to TIFF?

  I do not own this MFP is not in front of me. I'm trying to help a customer who continued to send a PDF that are too big for our portal.  If he could send as TIF/TIFF IMAGE, it would be probably much smaller.

  I have looked at the manual and don't see instructions/options for this.

  Does anyone have experience with this on this all-in-one printer? Is this possible?

  Thank you!!

  Hello there @Frannia welcome to the forums!

  I took a page from my scanner HP (on a Windows PC), there should be the ability to change the type of file to a TIFF file if the analysis of every day is selected. See what I had highlighted in yellow below. Ignore the red arrow to scan in PDF format.

  Also ensure the full functionality driver and the software is installed. If the driver is required, click on this link, select the operating system must be installed on the printer and pulled in and download it here:

  E-all-in-one printer drivers HP Officejet Pro 8620

  I hope this helps!

  Have a great Thursday

  

• HP Officejet Pro 8600: scanning on glass OK; scanning with ADF gives a gray line

  Hello

  When I scan a document on my HP Officejet Pro 8600 glass all in one, everything is OK.  However, when I use the ADF for scanning, a gray line appears on the scanned document.  Can I reslove cela to clean something or is this a technical problem?

  Thank you!

  Marc

  Hello there is Marc aka @mk75053 ,

  I'm sorry to learn that when you scan from your ADF file, you see a line on your document. This is usually fixed by clean under the scanner, however there could be other causes. I have the best guide for this type of situation that will show you where clean and give the appropriate instructions. I hope that this rid your question!

  Click here to start: vertical stripes, lines or streaks in the Copies, faxes or Scans

  Please let me know if I can help further.

  Best wishes