Similar Questions

• I've updated windows and now my computer does not connect to the wireless network.

  I've updated windows security updates and now my computer does not connect to the wireless network.  Until then, it worked very well and even now it will connect through wired connection but not wireless.

  Hello
   
  You can follow below link that can help you to solve your problem:
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

• CQ60-210US reformatted for Windows XP Prof, but it does not connect to the wireless network...

  Long story short, I tried recently to "downgrade" my husband computer CQ60-210US laptop from Vista to XP.  I followed the very detailed guide posted here and everything seems to work great but my computer does NOT connect to my home network.  It comes as an available network, but when I try to connect it goes on to say that the network is no longer available - is yet to ask security key.  I tried to click on the connection to a neighbor to see what would happen and it seems to go further (it asks me the security key).  I can connect directly using the ethernet to the modem cable.

  This laptop was initially working on my network wirelessly with Vista.  I use a CLEAR 4 G wireless modem.  The signal from the modem is good.

  Can anyone help me identify the problem and propose a solution?  Everything else seems to work well.

  Thank you very much!

  Try to uninstall the Atheros driver, you have now and install another:

  FTP://ftp.HP.com/pub/SoftPaq/sp52001-52500/sp52131.exe

• My computer does not connect to the wireless network

  My computer does not connect to a wireless network. It's almost like there is no WiFi. I go into the settings and nothing is. I know that the networks are there because the other computers connect to it. He says always "no connection available. When I try to pull of boredom he tells me to plug an Ethernet cable, which is the thing that I try to avoid. I want to connect to WiFi.

  Based on this information, your laptop isn't wifi, it is turned off, or it is broken.  A wifi used to work?  If so, what happened to your system, just as the problem started?

  Type "Device Manager" in the search box and press ENTER.

  • Look in the Device Manager to the network adapter section.
  • What devices are listed?
  • Are there warning icons?
  • It appears to be a wireless adapter, what's his name? Double-click it and to report to what is shown for "State of the device.

  You can also provide additional diagnostic information:

  • Type 'Information system' in the search box and press ENTER.
  • Click in the system information window and select all (CTRL + A) and copy (CTRL + C)
  • Paste (CTRL + V) the data in your response here
  • Return to system information window and click on the + next to "Components", then click on the + next to "Network", then click on 'map '.
  • Select all (CTRL + A) and then copy (CTRL + C)
  • Paste (CTRL + V) the data in your answer below, other data Information System

• B210A Photosmart - server connection error and does not connect to the wireless router

  I have problems setting up and to connect my router to my new printer b210A. Everything goes well with the initial configuration, and when asked to connect to the network at the start, it works. Then he said that the printer requires updates, downloads of updates, reboots, asks me if I want to activate eprint and as soon as I said 'Ok', I get a "the server connection error" and it is then no longer connected to the network. When I get out of the "server connection error" screen and attempt to reconnect to the network, he says 'Success', prints a Test report wireless, but never connects.

  It's the 2nd printer that I have had in a week, given that the person of HP online chatting told me my first printer had problems of "hardware", after experiencing the same problems and I'll be recommended. So - I did, and now I'm running into the same issues. The number of 800 was NO HELP - after recommended I have unplug and reconnect, then telling me there were server errors (when the printer was not connected to the network).

  We will set an IP address of the printer with a special focus on DNS domains:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway

  -For the first DNS 8.8.8.8 and 8.8.4.4 for the second use.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Laptop does not connect to the wireless LAN

  My knees worked well with the wireless and then suddenly won't go to any website. Laptop is connected wireless but does not to any website... If I go to solve problems... Windows Firewall is mentioned. Can anyone help?

  You mentioned the windows firewall in your message...
  It is possible that the active windows firewall prevents you from connecting and loading website...

  Usually active firewall should not create problems and its not recommended to disable the firewall internal system but in your case, you can try to disable the firewall for testing purposes...

  To open Windows Firewall go to control panel - Windows Firewall.
  Enable or disable, and then click turn on the Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  Then click on disable Windows Firewall in each network location that you want to stop trying to protect, and then click OK.

• Wireless Laser Mouse 6000 v2.0 does not connect to the Wireless Desktop 3 receiver. 0a

  Hello

  I'm having a problem, try to use a Wireless Laser Mouse 6000 v2.0 with a wireless desktop receiver 3. 0a. My previous mouse, wireless laser Mouse 5000 connects fine but the left click button is inadmissible about half the time so I bought the Wireless Laser Mouse 6000 v2.0 to replace. Laser mouse 6000 v2.0 works fine on my laptop with the usb receiver that comes with it, but I would like to use this mouse if you use my office receiving office 3. 0a that connects my microsoft comfort keyboard 1027 and all other previous microsoft mouse that I have owned. I downloaded and installed the latest drivers point software and smart and still it does not detect or connect the mouse 6000 v2.0.

  I tried to use the usb receiver supplied with this mouse on my desk but he won't my keyboard (comfort 1027), but the mouse works fine when using the usb receiver. Any suggestions to get this mouse works with my receiver older are greatly appreciated! Thank you

  Hi Mburton8899,

  It must have the same version of the receiver in order to work properly. Unless the mouse is bluetooth, it can only pair with the USB dongle, with which he came.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Photosmart more B209a_m: Virgin Super Hub does not connect with the wireless printer

  We recently upgraged to a new blank media 3 hub, the printer is connected to a Hp Windows Vista desktop via USB, other devices (laptops and tablets) could access the wireless printer when the computer is turned on.

  I also created the same printer to be used wireless by the other devices without the Office of marketing, it was a pain having to keep it logging on when he fell asleep. The printer had a different name if you are using one.

  After that the hub of the Virgin was installed I can is no longer using the printer without the Office being wireless, the new Center can not find the printer connects as is done before that other laptops, I had no problem with my old hub and a separate router.

  I've tried everything as suggested by Virgin (not much there) and reinstalled my drivers for the printer. Any suggestions what I can do?

  Hi @Confused_Nanna,

  Welcome to the HP Forums!

  I read your post about how you cannot connect your HP Photosmart b209 printer to your wireless network. I'm happy to discuss this issue for you!

  Please, try the steps in this guide, printer is offline (Windows) as well as this guide, the printer is not maintaining the wireless connection.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that this post helps!

• Map Wi - Fi on Satellite L40 does not connect to the wireless network

  Hello

  I have Satellite L40-15B with a realtek RTL8187Bcard. Problem is I Don t get a connection on wifi, but everything seems ok. I ve installed the BIOS update, the latest drivers and updates for Vista. Psychic Network is turned on, network switch is on, and yesterday everything worked fine. I had this problem too when I bought the laptop but thought that I solved it. Not!

  Vista tells me that everything is installed and works well. I can also see some available networks, but when I try to connect it just doesn't work.

  Someone at - it an idea what to do next? (by the way the network is ok other laptop computer wifi works fine)

  Thank you

  Albert

  Hello

  Your wireless network card seems to be properly recognized in Device Manager. And the problem is that you are not able to connect to the WLan router. Am I wrong?

  Have you tried to disable the Wlan encryption settings and then test the WiFi connection?
  You should also try to reset the settings of the Wlan router.
  Sometimes it helps.

  I got a WLan connection problem too I've checked everything twice and nothing worked Finally I reset the Wlan router. and surprise, surprise it's a key

• G60-230US == > does not connect to the wireless network

  Greetings...

  I got my new laptop a G60-230US with Windows Vista Home Premium SP1 yesterday... I was so excited. I quickly put in place and the network manager. He finds my home network (a router we Robotics MaxG 5641), had the exceptional signal strength, I have provided the password. It didn't connect to the network. I have 3 other devices without any problem. Then I disabled the firewall, antivirus etc. on the computer, I've disabled the security on the router and tried... Still no luck. I called the help desk yesterday evening, and a clueless CSR tried to 'Help me' After I turn the router, computer, WIFI (everything that I had already tried), she suggested that I should contact my ISP and get a new password. I explained to him that the password has been created by me for my own US Robotics router and ISP had nothing to with her... She just kept saying the same thing... and I politely thanked her and hung up at midnight...

  This morning, I tried something else. I tried ipconfig / all and I don't have any useful info, except that it says "Device off" I tried ipconfig/release and he told me that the action must be raised. I am the administrator on this computer.

  U.S. Robotics indicates that this default router should work for Vista, because a router is independent of the operating system

  Any idea is extremely appreciated...

  Thank you!

  Shankar

  I went to the office today max and I bought a new router D-Link Wireless N for $40. Came home and set up... and this baby is immediately connected to 130 Mbps! I'm all set... Great computer... I'm glad it works...

  I invite all who have problems with wireless to swap the router and check again...

• Satellite L40 - 14N does not connect to the WLan router

  Bought two portable Satellite L40 - 14N as Christmas gifts and one of them does not connect to the wireless router.
  Is the error that says "error message unknown" try please login again.

  The wireless network appears in the list of networks available with a strong signal. Notepad attempts to connect but the error 'wireless link failed for an unknown reason. " Made a comparison with the other laptop that works very well and the configurations appear to be identical!

  Tried it on wireless network from a friend with the same result. All suggestions, am pulling out my hair at this point.

  Seems to be a Vista issue.

  I found this article Ms knowledge base:
  http://support.Microsoft.com/kb/928233/en-us

  You need to add a value in the Windows registry.

  1. Click Start, type regedit in the search box, and then click regedit
  list programs.

  2. Locate and then click the following registry subkey:
  HKEY_LOCAL_MACHINE es\Tcpip\Parameters\Interfaces\ {GUID}
  This registry path, click the (GUID) subkey that corresponds to the
  Network adapter that is connected to the network.

  3. on the Edit menu, point to new, and then click DWORD (32-bit) value.

  4 new value #1, enter DhcpConnEnableBcastFlagToggle, then
  Press ENTER.

  5. right click on DhcpConnEnableBcastFlagToggle, then click on modify.

  6. in the value data box, type 1 and then click OK.

  7. close the registry editor.

  concerning

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• Thunderbird does not connect with the server

  Another recent problem is Thunderbird does not connect with the server. I don't know if sent mail will go out, but I know I'm nothing receive. My internet connection works well for FF or another browser. I checked my settings and they seem OK. I checked the default settings in Win10x64 and they are correct. Any ideas?

  Although windows 10 is new for us all. How do solve you. I have other solution with very similar issues.

• Does not connect with the e-mail server after update.

  Thunderbird ran an auto update yesterday. Then it just stopped working. It does not connect with the Comcast email server. An error message appears "Unable to connect" and "the connection was refused when attempting to contact live.mozilla.messaging.com. I don't want to uninstall and reinstall for fear of losing my emails and address book. How can we get Thunderbird set, there is no tool in the toolbar to enable the debugging and correction of program errors.

  I use Thunderbird version 38.1.0.

  Thank you.

  The problem solved itself, Thunderbird has just started working. I followed the thread suggested by Christ1 and found none of it applied. No malware, no browser, no certificate error security block. I did, however, in Thunderbird, under Tools/Options/General uncheck the button for "When Thunderbird launches, show the Start Page in the message box." I do know that if this helped, Thunderbird still do not access Comcast mail for hours after that, even with several stops and restarts.

  Until the next problem...

• My UK 6s iPhone does not connect to the network in Germany?

  My UK 6s iPhone does not connect to the network in Germany?

  'The network '? Which network? WiFi or cell phone? And what have you already tried to get connected?