Photosmart C6280 issues print

Similar Questions

• HP Photosmart C6280: my HP Photosmart C6280 ceased printing and copying. I use a Mac OS 10.10.5

  My HP Photosmart C6280 stopped printing and copying. I use a Mac OS 10.10.5. The printer seems to work, but no ink is on paper with a function.

  I installed a new black ink cartridge and select "black only" with the same results. All the other ink levels are sufficient.

  I would appreciate your help. The printer has been idle for a few days but a previous usage has been a success.

  Welcome to the Forum from HP Support. I hope you're well @Suz161!

  Thank you access the Forums from HP Support for extra support! I see that you are having problems when copying / printing. I will do my best to help you with this problem.

  It looks like a problem with the printer ink. It may have dried due to non-use. I suggest that try you to perform a print head cleaning. Try the following steps:

  • On the printer control panel, press 'Setup '.
  • Press the down arrow button to select Tools and press OK.
  • Press the down arrow button to select "Clean printhead" and press OK.
  • If the print quality is acceptable, you can stop troubleshooting.
  • If the print quality is unacceptable, perform a print head cleaning.

  You can try the steps mentioned additional troubleshooting here: http://hp.care/2dVLZUu

  Let me know how it goes. Nice day!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• HP Photosmart C6280: cannot print on C6280 wireless after the upgrade to Windows 10

  Cannot print on C6280 wireless after the upgrade to Windows 10. Have removed the device, but try to re install the printer when is not found. Can print if I connect USB. Tried to reload the driver using HP Support software help, but when he arrives at the end of the download fails.

  Hi @Ron9871,

  Welcome to the Forums of HP Support!

  I see that you are unable to get your printer HP Photosmart C6280 wireless printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I would like to try the steps in this guide, "offline" Status Message printer (Windows 10).

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  • Print a Page of Network Configuration menu of the printer front panel. Note: the IPV4 IP.
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.

  Please restart the router, the printer and the computer in this sequence.

  If you're still having problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  You can try to change your WSD printer port by a Standard TCP/IP port.

  To do this, you will need your current IP address printers.  The Network Setup page shows the parameters of network for the product. To print this page; Press the button of network () on the control panel of the product.

   

• HP Photosmart C6280: my printer turns on.

  My printer was working well, but today it will not activate.  I've checked all my connections...

  Info is on the website of HP.

  http://support.HP.com/us-en/product/HP-Photosmart-C6200-all-in-one-printer-series/3194493/model/3194497/document/c01321436/

• Photosmart C6280 issue in point 8.1 of Windows

  I have a C6280 in my wireless network that worked perfectly with all my machines, Mac, Win XP and Win 7. I recently picked up a laptop Dell with Windows 8.1.  After going on the HP support site and download the new driver package, I installed it on the machine. During the installation process, after having chosen wireless, he went through the configuration, the printer, even showed but I could not put it up to print or even connect. I got stuck in a loop by telling me to install the drivers. I uninstalled and tried again with the same results.

  Any idea? Thank you.

  Interesting. I just re-downloaded the complete package of HP and went through the process of Setup again. This time, it worked perfectly and the printer was found and installed. Apparently the first couple tests Windows 8.1 was having a bad day of hair or something.

  Problem is resolved... Thank you.

• Black all-in-One Photosmart C6280 ink prints very bad

  Black ink stopped printing 2 days ago started printing anything. I tried everything that I could see to do - cleaning heads manually, then cleaning using the tools of the printer, alignment, self-diagnosis and given to zero. Now it prints, but black is ridged and light of color, very poor quality. What now?

  The troubleshooting steps described in this document can help solve the problem.

• HP Photosmart C6280 prints not Magenta or Light Magenta even with new ink cartridges.

  Our HP Photosmart C6280 has always produced excellent results, but all of a sudden it won't print Magenta or Light Magenta, although they show of 75%.  We even tried to put in new ink cartridges, but they still does not print.

  Hello

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  HP - Photosmart C6280 - Product Support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3194498&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP - Photosmart C6280<- set="" to="" your="" version="" of="" windows="" for="" the="" proper="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3194498&LC=en&cc=us&DLC=en&lang=en&cc=us

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  These might help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• All-in-one printer, HP Photosmart C6280 range

  cabnot use black ink only or auto duplrx options

  Hello

  You should check with the help of HP, their documentation online, drivers, diagnostics and ask in their forums.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  HP Photosmart C6280 all-in-One Printer - Support
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3194498&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP Photosmart C6280 all-in-One Printer - drivers and software
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3194498&LC=en&cc=us&DLC=en&lang=en&cc=us

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP photosmart C6280 printer

  I had problems with my printer. Before I uninstalled the drivers. I was getting a pop up whenever the solution center came. He continued to ask me some HPAssistant.msi. I have to keep clicking on cancel until he went. Recently my printer was not recognized by my computer...

  So, I read somewhere on the forums to uninstall drivers and reinstall them and who's going to fix that. Well my problem now is that every time I have try and download the drivers on any computer, it of not down load but it gives me a cannot connect screen - I click Retry and it continues.

  What I have to do!

  Please help me, thank you

  Hello tmprather,

  If this happens when you try to download the file from the HP website, that might help:

  When you try to download the full software functionality for the Photosmart C6280 for Windows XP or Vista, this is the link that opens when you click the download button:

  FTP://ftp.HP.com/pub/softlib/software10/COL19845/MP-52268-5/100_228_PS_AIO_02_Full_Net_enu_NB.exe

  Change the first "ftp" to "http" in the address field so that the link looks like this:

  http://ftp.HP.com/pub/softlib/software10/COL19845/MP-52268-5/100_228_PS_AIO_02_Full_Net_enu_NB.exe

  Press enter and you should be able to download the file. When it's done downloading, simply double-click on the file and the installation should begin.

• Manually uninstalling the program driver struggling for Photosmart C6280

  I had problems that motivated me to uninstall and reinstall my driver. Unfortunately, the uninstall program has been damaged and did nothing. I tried to reinstall it on top of the current program but the Installer did not provide this option when he saw that the program was. I tried HP Print and Scan doctor but he said everything was fine.
  
  I tried to uninstall manually. I removed startup entries, registry entries and most of the files in the directory of Hewlett-Packard. 4 files will not delete even if I thought I had all the startup items. It says: "cannot delete hpqddcmn: access denied." Make sure that the disk is not full or write protected and that the file is not currently in use. »
  
  My printer is a HP Photosmart C6280 all-in-One.
  I have Windows XP SP3
  The printer is connected by USB cable

  Ok no problem.

  If the C6280 software has been downloaded and extracted to your system:
  1. type % temp % in the field of race
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup

• Need driver for HP Photosmart C6280 all-in-One priner

  I was given a HP Photosmart C6280 printer, but the person do not have the disc that came with it to install the driver. I am reluctant technologically and have no idea what to do. Can someone please tell me where to find a driver for this printer and how to install it? I tried to use a driver on some other sites, but they want a credit card, and quite frankly, I don't trust them.

  Thank you!

  SWelch,

  I am more then happy to help you get the software for your printer. If you follow the link below, it will take you to your site of printers.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=3194498&task=&

  I hope this helps.

• HP Photosmart C6280: problem scanning using HP Photosmart C6280

  All of a sudden my all in one HP printer displays "No. Scan Options" and the HP Solution Center cannot find any HP product installed on my PC, although I am still able to print.

  I found the help section relevant on the Web site which shows the topic "no option on HP Photosmart C6280 scan using Vista" but if clicked, no documents appear, the only question asked was useful document? !!

  Hello @CovBoy,

  Welcome to the Forums of HP Support! I understand you can't scan with your HP Photosmart C6280. When you try a scan of your computer that is running the Windows Vista operating system, you get an error message "no scan options".

  I see that you were able to find the document for solving the problems, but it does not open for you. Try clicking on the link below and follow the steps listed, the same steps apply:

  Message "No Scan Options"

  You are now able to scan or you still get an error message? Let me know I'll watch for your reply.

  Thank you for being a part of the community of HP. If you want to say thanks for my effort to help, click on the "Thumbs up" to give me a "Bravo".

• Photosmart Plus B210a print or copy black

  My B210a Photosmart more to print or copy in black mode 'Copy' or 'Print PC'. Black cartridge is almost new and has worked for 2 weeks; color cartridges are between 25% and 33% of ink left. Colors will be printed, and there is no error message. Wireless printer works from a PC with Windows Vista.

  Help, please.

  Hi, if the printer is on a thing of warranty that may be worth soaking the print head...

  (1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
  (2) remove all ink cartridges, then remove the print head Assembly.
  (3) gently put the printhead nozzles down in water and soak for 5 minutes.
  (4) remove the print head and gently dry the electrical contacts.
  (5) replace the print head in the printer and then reinstall the ink cartridges.

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/HP-6500-Office-Jet-E709a-black-printer-cartridge-HP-920-not/m-p/447545#M36315

  Can you please let me know how you go?

  Thank you

  Ciara

• HP Photosmart B109n-z (printing problem) Please help

  Hi all

  I have the HP Photosmart B109n-z printer and put up wireless and it works fine I had no problem with him.

  The other day the black ink stopped working - the cartridge is not empty but it's is no longer black prinking on all documents.  Since I put all new cartridges in, he acknowledges them all, including black, and if I print something like a word document, and then it moves as if printing but the page comes out blank - no black ink is used.

  I work for myself, and work at home, it will get this resolved as soon as possible.

  I checked the cartidge - it's good.

  I checked the connection and the Bay print cartridge - they are clean.

  Help, please.

  The color works fine.

  The issue of black ink is the same print, scan or copy.

  And I have tried turning everything off and on again!

  Hello

  You could try the Solution 5 in the document troubleshooting that I am a link here:

  Quality of ink troubleshooting

  This will show the colors that are printing.  There are also additional troubleshooting steps to follow

• Example: Pavilion Elite m 9040: Solution Center HP for HP Photosmart C6280 all-in-one on Windows 7 Ultimate 64 bit

  Once I had the HP Solution Center. I would like to download again for a HP Photosmart C6280 all-in-one on Windows 7 Ultimate 64 bit but can not find the download. Anyone know where I can find and download? The computer is a HP Pavilion Elite m9040n PC.

  @JCL9

  Here you go...

  Your Web site Support Page printer - and full functionality Softaware for Windows 7:

  All-in-one printer, HP Photosmart C6280 range

  Help, information and examples:

  Install the full features software - printer

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.