HP psc1315 suddenly gives me an error "check print cartridge".

Similar Questions

• HP psc1350 all-in-one: check printer cartridge error will not clear

  In the middle of printing of the check print cartridge light error came.  The cartridges are faily new and there has been no discoloration.  I tried to remove and reinsert the cartridges, disconnect the printer from the computer, disconnect the printer, press Cancel.  Error will not clear

  Hey @dennisc10,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with an error light on your PSC 1350 all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, this document explains How to solve the blinking lights on the printer.

  If after following the above you still can not clear the error, the printer needs to be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know the results after following the above. If you are able to solve the problem or reach some resolution, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Remove and check print cartridge error sign

  I have a HP Photosmart C4150 all-in-one printer.  The ink cartridges are newish.  When I try to print a web page or a page in MS Word, the message remove and check print cartridges appears.  I removed both cartridges and re - install, but without success.  I have a MacBook Pro.

  How long were these cartridges in the printer? You can try to clean the contacts by following the steps below.

  First step: remove and check cartridge

  The print cartridge cannot have a full electrical contact with the printer. Can help to remove, and then reinstall the cartridge. To remove and inspect the cartridge, follow these steps:

  NOTE: HP does not guarantee the quality of remanufactured or refilled cartridges.

  1. Make sure that the printer is turned on. If it is not lit, press the power button.

  2. Open the printer cover, and then wait the carriage is idle and silent.

  3. Press gently on top of the cartridge to release it.

     Figure 2: Removing the Tricolor cartridge

     

  4. Slide the cartridge out and review it.

     Warning: Do not touch the electrical contacts or the ink nozzles.

     Figure 3: Electrical contacts and nozzles

     

     1 - copper electrical contacts

     2 - nozzles

     • Check the electrical contacts for debris.

• HP2410xi error message remove and check print cartridges.

  All-in-one HP 2410xi.  Has been printing with the current cartridges and I got the message "remove and check ink cartridges" I removed and checked and they are about half full, no leaks.  Put them back in and same message.  Machine unplugged and restarted, same message.  I removed the cartridges, unplugged, turned back.  Screen says load cartridges, same message.

  This remove and check print cartridges can help:

  http://support.HP.com/us-en/document/c00054462

• CSP 1100, flashing "Check print cartridge", although both cartridges are fine, will not be printed.

  Hi all, I have a problem with my old all-in-in-one. I tried to use the copy machine on some files I need for my review at the end of the month, and it went thru like 10 pages and then stopped in the middle of a page, flashing "check print cartridge". I removed the black cartridge and it finished copying this page but only the parts of color... that are a couple highlights with a red and green pen, so it's really funny - I points out but no text. Large.

  The cartridges are new, they were replaced about 2 years ago and not used, since then the printer has been idle since it does not work on Windows 7, only the scanner does, therefore, there is no way for me to read error messages. I replaced the cartridges because he said that black was an incompatible type or something like that, even if SHE HAD NOT BEEN CHANGED, the error just popped up by itself. Now I bet that if I install it on a computer with XP it will give the same exact error. The cartridges are a real substitute for HP, they are clean, I cleaned the connectors too, nothing. When I cleaned the connector this error first popped up on the old cartridge and the cartridge started working again, but when the error does not arise in a second time no amount of rubbing contacts would get working again so I bought a new. What seems to have been the same fate.

  Because I can not install the drivers for the printer I can't put that simply use the single color cartridge, so the thing refuses to print anything now. And I left the funniest part for the end - I did the self test thing with now cancel and press color copy. The test page doing very well. He is a minor, scratches on the colors, but black (which is the problem cartridge) is PERFECT. If it works, but it simply refuses to copy my files. I'm puzzled.

  If they are any use to you here is the codes on the self-test page:

  PSC SERIES 1100. S/N MY3CNG92BSB0. FW R0025XXNXFH1. USB VID:03F0 PID:3011.

  508 PAGES. (see, it was not yet used a lot) LAST ERROR A00000EC. (I think this might be useful) OKAY NVM. SERVICE ID 0. MRGN 1.

  CBA 2.0 MB. DAVID S 0001. ALTM 6272. 243E62E LEFT. 1C2B126 RIGHT.

  I'm good with electronics and I think it must be dismantled, it is refilled and resoldered, but I don't have time for this now and I need my files because I need to study on their part and I give the originals back on Monday. So is it possible to force the copy as the self-test page only?

  The fixed. I decided to take it apart because I did before aligning the scanner, I was somewhat familiar with its internals. I removed the power supply and found the damaged and also very hot main filter Cap. I have had no direct replacement so I have attached another 150uF with son Cap until I buy one that fits inside the PSU.

  The copier works now, and it is also not more of this shrill noise that it used to have. I have to use only color cartridge, but at least I can get my paper work done. Most likely there was a power surge and due to the bad capacitor it obtained through food and broken logic in the black cartridge.

  BTW, I read that if you get MRGN: page 1 of the self-test it means you have a bad cartridge. Well, it always reports MRGN: 1 with the only color cartridge but it does not copy now, whereas before you replace the capacitor there not even wanting to pull the paper with the only color cartridge. I also managed to get install on a Vista computer, but since it runs with a generic driver there is absolutely no useful reports either (not not even the ability to set the configuration of the cartridge to color only, but he seems to have figured it out on his own now).

  In any case I still have to buy a new black cartridge... or better, a new printer.

  EDIT: I just tried again the black cartridge and guess what? He spits the alignment page, I scanned it and now it works fine. Now, I'm sure it was a bug in the firmware triggered by bad power supply filtering. Well, here's to hoping it REMAINS fixed.

• I filled my printer with an hp1200 cartridgeworld cartridge and now the printer always says "check printer cartridge? any ideas help please

  I filled my printer with an hp1200 cartridgeworld cartridge and now the printer always says "check printer cartridge? any ideas help please, PS is not the first time I used these cartridges, but this is the first time I had no problem

  Hello

  Follow these steps and check if that helps:

  Method 1:
  Try to run the printer Troubleshooter and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:
  Try to run the below fixit and check if this may help:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  It will be useful.

• Photosmart C3150: Check paper/Check print cartridge

  I replaced both ink cartridges; However, the "check paper/check print cartridge" lights continue to blink at the same time and there is an 'E' in the box next to "Copies". While the printer is not new, it has barely been used and still in the box. Can someone please advise about other options I could try to solve the problems? Thank you

  In the paper here troubleshooting steps can help solve the lights flashing Photosmart c3150 printer.

• Check print cartridge

  Hello

  I have a HP PSC 1317, which is now on display "check print cartridge".   I cleaned the contacts and replaced both cartridges, but it is always showing the same message.

  Can anyone help please.

  Hi Woollyx2,

  I see that you have a problem with your ink cartridge and have made efforts to solving the problems already. Please complete all of the steps described in the following document; Check light flashing print cartridge.

  If the problem persists, you may want to consider to call HP to see if they can offer you a discount, a newer model. Since you have already replaced the cartridges, I suspect that the issue is the printer and not the cartridge. To complete the steps outlined in the document as it will guide you through the procedure to clean the contacts in the printer and the cartridge. If it is / was something on the contacts in the printer cartridges would not solve the problem, try the solutions in the connection before you call HP.

  If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

• C4280 HPPhotosmart incorrectly installed error msg print cartridges

  I get an error message printer saying that the ink cartridges are installed correctly. I tried reinstalling several times. The cartridges are installed correctly. When replaced the last time, all went well test page and alignment. then, after a week, this message started coming and when I try to print, it is the impression that it is low on ink. Any ideas?

  Here a link to a document that deals with rejection of cartridge for your printer model. It will provide troubleshooting steps which include those that you mentioned and then go further by offering more process to try to erase and correct the error. I hope this helps.

• HO Officejet 6110 all-in-one printer gives a message to check the cartridges

  The above printer has always worked well so far.  I have a message to Remove and check cartridges. I deleted them several times,

  turned the printer market and unplug the power cord, etc.  The same message keeps coming up.  I changed one of the cartridges-

  put in a new color cartridge and it is still there.

  What can I do?   Help!  !

  Hello Renee,.

  Have you contacted HP about this?

  Maybe they're the best people to answer that for you because they know the material side of the printer.

  We use HP cartridges or are they off-brand?  Sometimes, off brand cartridges do not recognize properly.

  My recommendation would be to get the entrance of HP on it.

  Best regards

  Matthew_Ha

• HP 7550 Photosmart printer range gives me an error message "color cartridge failed. Install the new cartridge.

  I installed a new tricolor cartridge and it still gives me the same message. I am very frustrated at this point. He now will print mode reserve with the cartridge removed. Help, please! I bought the color printer to print in color!

  Thank you

  jdokos95

  I enclose a link that might help you. Let me know how it goes.

  Click here for the link.

  Let me know how it goes.

• Error "Incorrect print cartridge" psc1315, although his new and right!

  
  

  Hi PC30ty,

  No, it would not be bound to the use of quick printing of project quality. I suggest you replace the cartridge with a new one to see if you still have the same problem. Let me know what you find?

• My printer is coming up with the error message "Print Cartridge problem".

  Just simply change the color cartridge, does anyone know how to reset the printer because I think it's a problem that will be fixed by the present, not sure.  The cartridge is a cartridge HP, so it cannot be that.  It is a HP Photosmart C4680.

  Hello

  What version of Windows are you using?
   
  You may have to contact HP for help because the problem is with the printer.
  http://WWW8.HP.com/us/en/support-drivers.html
   
  For reference:
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01675471&tmp_task=solveCategory&LC=en&DLC=en&cc=us&lang=en&product=3739150
   
  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
   
  Hope this information helps.

• pc2510 check right printer cartridge/no taken into charge/hourglass errors

  Hello!

  If anyone has had success resolving these errors, please let me know, even if it is intended to replace your ink cartridge. Thank you!

  Error description:

  Original problem: printer cartridge "Check right printer cartridge" error message blocks any use of the psc 2510, including analysis and noncopying functions not printable.

  Current issue: hourglass gel accompanied by sounds (alignment?) printer that stops, but message screen ahead never past hourglass...

  Summary of troubleshooting:

  I got an error saying: check the cartridge in the right store. Tried cleaning the contacts on the cartridge and printer with distilled water. When using tactics in the online tutorial, I tried unplugging the power while the printer is open. Since then, just going through hourglass and his printer, it does not advance beyond this icon screen.

  Technical customer support:

  Suggested a semi reset of # and 6 keys more disconnect and reconnect or try the new print cartridge. When asked is there something I could try before buy a new cartridge, suggested I unplug and hold button power for 10 seconds, then reconnect. (Full description of these stockings). For further research, the representative suggested an upgrade.

  Hourglass fix employed attempts of the forums:

  Tried to plug into the wall Strip vs. (Fully plugged loose connection to the brick when notice was not in all the way.) Reset the modem. No results.

  What I have tried:

  Haven't tried a new cartridge in the printer until you have exhausted all non-monetary fixes.

  Full description of troubleshooting:

  The first error: check the cartridge in the right store occurred all of a sudden after use without problem.

  The contacts on the black cartridge have been cleaned, but the error persists.

  After cutting the use for awhile, I reconnected him last night to resolve the error on the current Mac computer printer cartridge. Installation was completed successfully.

  The same error once the installation program completed.

  I performed the following:
  (1) cleaned the contacts on cartridge black print using distilled water.
  (2) disconnected the power cord (by post in the forum)
  (3) disconnected power cord and tried pressing Cancel/left arrow (by the same post in the forum)
  (4) contacts cleaned behind black printer cartridge
  (5) print cartridge black removed, closed insert machine and got error black cartridge (attempt to determine what cartridge was the problem)
  (6) even if this message appears to indicate that the black cartridge was the problem (by the article of the web support) I cleaned the contacts on and behind the cartridge color as well.

  As part of troubleshooting, I had a second error: "Print cartridge in the right store not supported."

  I noticed that the adjustment is more flexible than in the color cartridge. I inspected the box spring and cartridge for damage and found nothing. Clean the dirt, however below the contacts on the machine.

  Also, at some point during troubleshooting, I could access the menu scan but then he quickly returned to the first error message.

  (7) for each article in general support online, I tried to unplug the power, while the cover is open (as shown during the cleaning of the cartridges). This information was not in the manual that came with my camera. I was hoping that this could restore the things.

  Then I got the third mistake: a period of sounds of the printer (alignment?) followed by hourglass on the screen.

  The 2510 seems to be frozen. No buttons like cancel or menu or the button caused no response.

  I unplugged it again (this time with the lid closed) and got the same series. A period of sounds like alignment, then a stop of sounds with the hourglass stays on the screen.

  Customer Service Rep sent the following:

  E-mail 1:

  1. If the printer is on, without turning it off, unplug the power cable of this one.

  2 hold down the # and 6 set, while you hold them, plug the power cord into the printer

  3 hold the keys for about 30 seconds, then the printer tries to turn on, then release the buttons.

  4. If the printer turns off, use on the power button on the printer and follow the instructions on the screen.

  If she always comes with the same error, I ask you to try with a new black cartridge back to us with the results.

  E-mail 2:

  1. when the printer is turned on, without turning off the printer, unplug the cable it

  2. press and hold the button for 10 seconds and release it.

  3. after 1 minute, plug back power cord and try to turn on/off the unit.

  The reason why I suggested to try with a new cartridge is every time that powers printer on, he made a self-test to make sure that all hardware components that work very well, including cartridges. So if there is an error with the cartridge, the printer might freeze if it is unable to determine the cause of the problem or of the point of failure.

  E-mail 3:

  I did some research and the issue seems more likely with the hardware of the printer. [...]

  If the problem persists, get back to us with the information below for the upgrade for your printer options.

  Forums:

  Then I tried unplugging power strip to wall socket and the modem reset without result. Blue light for wireless connection is no longer on.

  Message edited by allinfun2510 on 04/05/2009 17:46

  We discovered the printer from my husband uses the same cartridges (this is also a hp) and so we have put a new cartridge in my all-in-one and it worked. It my case the error was really indicating that I have just needed to replace the cartridges (they were probably too weak or ink)

• "remove and check ink cartridges" error on HP 2401

  ORIGINAL TITLE: Print printer print

  Recently, I replaced print cartridges on my HP 2401 printer.  Printer has worked for a few weeks, and now an error that says: "remove and check print cartridges.  I did this (interface buvardages print cartridge on paper towel) and put them back in, but get the same error.

  When I replaced the cartridges a couple of weeks, it does not ALIGN cartridges at startup.  Costco using refills... suggestions?
  Ron

  Hi Ron Flamm,

  What operating system is installed on the computer?

  I suggest you try the steps from the following link:

  Error message: remove and check ink cartridges
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&cc=us&DocName=c00054462

  Remove and check cartridge

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00042821

  I suggest you to contact Hp to know that the problem is with the printer.