HP software install Set Up for Photosmart series C4700

Similar Questions

• I try to install my printer HP photosmart series C4500 it error please advice

  I try to install my printer HP photosmart series C4500 it error please advice

  I try to install my printer HP photosmart series C4500 it error please advice

• Cannot install driver printer for Photosmart C7180 All-in-Ohe

  It is a complicated mess.  My operating system is Vista Ultimate.  It started with a print job stuck in the queue.  When I did as indicated by a technician of HP, and I did not yet do not forget that I was told to do more, after a reboot, the print job is still stuck.  I spoke with another HP tech and finally, he told me that I need to uninstall the printer driver and reinstall.  It wouldn't reinstall, and I got the error message "HP Recovery to install plugin has stopped working".  Then I learned from another technology that the pilot was incompatible with IE8 and I had to uninstall IE8, install the printer driver, and then reinstall IE8.  After uninstalling IE8, it was still impossible to install the printer driver.  I got the message error "HP Installer preinstallateur updated plugin has stopped working".  Another technology, the fourth in the order, said it was a Microsoft problem.  I called Microsoft and got a tech who has done everything in his power to circumvent the problem and this is what I have, workaround.  I can print from my desktop via my laptop, that is shared over a network and who does not have the printer driver installed.   The technology of Microsoft told me it was a problem of HP.  How can I get the driver reinstalled on my desk?  I keep getting the error message "HP Installer preinstallateur plug-in update has stopped working," if I try to load the printer driver on the HP or my installation disc download site.  Any help would be most appreciated!  I don't want to buy another printer when this one worked very well except for a print job stuck in the queue!

  I am answering my own post!  Took a chance and bypassed the recommended installation and custom installation.  When the custom install window that is displayed, I selected all the elements and the printer driver installed!  Hooray.  Now I'm still wondering how to get a print job stuck out of the queue - he would not cancel.

  Thank you.

• Qosmio F30-112: cannot install Virtual Sound for Vista

  Installed Windows Vista, downloaded sigma drivers audio version 6.10.5462.0 and installed them, then I tried to install Virtual Sound and got the message "Toshiba Virtual Sound can't stand your computer." Where is the problem?

  Hello

  Are you sure that the usefulness of virtual sound is supported on this laptop?
  Form where you downloaded the utility?

  The Qosmio G30-112 belongs to the series of PQF30E. You must install the drivers for this series of the European driver Toshiba page!

  I checked the Toshiba page and the virtual sound for this camera has a 10317version.
  Seems that you have used a wrong

• No duplex option AUTOMATIC in Windows 7 for Photosmart C7280 software

  I have the drivers & software installed on Windows 7 64 bit and I cannot set automatic duplex printing as I have in Win XP.

  He appears briefly (for 1-2 seconds) in the print properties dialog box, and then disappears into the menu drop down.

  Someone at - it ideas?

  The photosmart C7280 is not a switch to automatically detect the duplexor.  It appears the pilot 13 version is set by default to "not installed".

  Try to go to the printer properties-> device settings tab.  The "Installation Options" value-> unit duplex (for printing on 2 sides): "installed".

  Now you should find automatic 2 sided option in the shortcuts printing, the characteristics and the printing preferences tabs.

• A software says I need 4 MB of VM set aside for the program to run.

  Original title: virtual memory.

  How to set 4 MB of virtual memory in windows xp? A software says I need 4 MB of VM set aside for the program to run.

  Hi KennethBrasel,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description provided, looks that you receive a virtual memory message when installing a program on Windows XP computer.

  By default, the virtual memory paging file that is created during installation is 1.5 times the physical RAM on your computer. Therefore, a computer that has 1 GB of RAM installed will have 1.5 GB of virtual memory.

  You can manually change the size of the swap file to make it larger or smaller. You can also optimize virtual memory use by dividing the space of files between multiple drives and by removing the disks slow or very open space.

  He would be grateful if you can answer this question in order to help you further.

  1. What is the size of your RAM memory?
  2 are. what program you referring?

  I suggest you try the following steps to change the virtual memory:

  a. Click Start, right click my computer and then click Properties.

  b. in the System Properties dialog box, click the Advanced tab.

  (c) in the results pane, click settings.

  d. in the performance Options dialog box, click the Advanced tab.

  e. in the virtual memory section, click on change.

  f. change the initial size value and the value of maximum size to a higher value, click on set and then click OK.

  g. click OK to close the performance Options dialog box and then click OK to close the System Properties dialog box.

  Note: With virtual memory, the computer can use the hard drive as memory (RAM) space. The computer uses virtual memory to increase the ordinary RAM that is installed on the computer. If you reduce the size of the pagefile, some the program may not start correctly or may not start at all. This problem may occur even if the computer has plenty of RAM.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• do not install the driver for XP photosmart 5510

  I tried in vain several times to install the driver for my refurbished XP for my laptop HP photosmart 5510. I said I want to install via radio - he finds the printer and lets me select - then it starts the installation.  It gets about two-thirds through the bar of "installing network printer." "and crashes.

  I let it rest, go to walk my dogs, prepare dinner, and it moves of there.  When I click on cancel, it crashes during the phase cancellation and I'm relegated to "force quit" process.  It's annoying!  All I want to do is wireless printing.  Scanning the computer would be an asset.

  BTW, I had NOT of PROBLEMS installation on laptop of my wife under System 7.

  Help, please... Thank you

  Docswan

  Hi docswan,

  I can't wait to hear that you are experiencing installation problems.  The following steps may resolve this problem. You can also view documents related to this issue by clicking here.  If you are unable to install the full features software, a generic driver can be installed via windows to enable printing only.  Here is a link that will provide the steps to do this.  Click here

  1. connect a new printer.

  2. the software freezes when "control network.

  3 allow software to sitting there for 3 minutes (to fill in the background).

  4. go into the Task Manager process tab.

  5. complete the process of HP network Communicator.

  6. This should push the software to a point to choose wireless or Ethernet.

  7. Select Ethernet or wireless depending on connection.

  8. Enter the IP address manually in the appropriate box.

  9. the software freezes probably during the 'network of control' all or part way through.

  10 allow software to sitting there for 3 minutes (to fill in the background).

  11 go into the Task Manager process tab.

  12. end of the process of HP network Communicator.

  13. This should push the software before saying that the printer cannot be installed correctly, but can be installed via the IP address.

  14. click "continue".

  15. the software should continue and give a green check mark.

• Installing drivers for Photosmart B109a-m on a laptop Windows 8.1

  I tried to install the drivers for a printer/Scanner Photosmart B109a - m using the HP Wizard. The software is downloaded OK but when I click on the button of the installation on the setup I get a message "the system cannot find the file specified".

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, continue following the steps below:

  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• Software for Photosmart 309g - m - Windows 7

  I am trying to install any driver for my printer / Photosmart Premium 309 g - m on an upgrade to Windows 7 Ultimate edition of a system completely patched Vista who never had the printer installed on it...  I downloaded both Photosmart basic drivers - 2010-03-29, Version: 14.1.0 and Photosmart full feature software and drivers - 2010-03-24, Version: 14.1.0 and tried installs several of each.  I used administrative ID and standard user ID and get the same result.

  After the decompression software into the temporary folder in users/user/appdata/local/temp, the installation begins and during the initial phase of 'system control' get an error message-

  "The system could not find the specified file".

  and is the path in the error bar - "C:Users\user\AppData\Local\Temp\7zS2E41\Setup... \Setup\hpzpnp01.exe" "-...»

  I am getting very frustrated because I can't take this error.

  If I can provide any other information that made me know what you need.

  Thanks for any help on this.

  Hello Aspirin1960

  Try the following procedure must uninstall and remove any software interferente. Let me know if anything changes.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  Software Photosmart C309g

  10 go back to the temporary folder and delete all files starting with 7z

  11 start the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  Software Photosmart C309g

  10 go back to the temporary folder and delete all files starting with 7z

  11 start the download to reinstall the printer

• Update removes himself from the software update for Photosmart 3210 (Snow Lepoard)

  Hi-

  So I recently installed the full software for my HP Photosmart 3210 for my mac which is under Snow Leopard. However each time I run the software update / sometimes it automatically prompts for installation:

  Drivers HP Update V2.3 size: 4.8 MB

  I always choose to install it but for some reason it doesn't seem to withdraw from the automatic update. Either I think its not install or not really sure. I checked the version number on the HP Installation Wizard on my computer, I installed a this is version 2.3.15. I don't really know what to do.

  Any ideas?

  Thank you!

  Do you really need it?  Snow Leopard has print and scan drivers built into the OS, so the HP software is not necessary.

  To uninstall completely that it:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Now run a software update.

  Then, remove and reinstall the printer in System Preferences, Print & Fax.

  Scan from preview or Capture of Image apps. Scan from the front panel of the printer does not work yet.

• got first code 8024 008 then update new software needs to search for updates, but it will not install failed 11 times

  Mother upgrade and cpu card.  Had to clean install Vist Home Premium for the new configuration to recognize my old HD.  Moved all my files and folders from the old folder to the new installation windows.  Update down loaded and installed more than 100 updates.  Some were unsuccessful.  Installed SP1 and SP2.  Checked today to see if new updates are available, and that's when I got the code.  Second time I tried to check is when he says update windows needs new software to check updates.  Tried 11 times and each time it could not reopen the window update and in the history of its States that it is impossible to install.    Have searched high and low on the site of MS and the web without success.  Any help would be greatly appreciated

  Hello

  1. What is the brand and model of the computer?

  2. What is the security software installed on the computer?

  3. What is the full error message?

  Method 1:

  You can run the fixit from the following link and check if it works:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Try the steps from the following link and check if it solves the problem:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 3.

  You can update the necessary hardware drivers and check once more.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-US/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

  Let us know if it helps!

• Device problem: "Master UDS Bus of Kernal USB driver software Bus by TCP is not installed. Looking for driver fails.

  New install of Win 7.  Control Panel >... > devices and printers: problem with the computer. Convenience store ran with results: "pilot of Master NODES Bus of Kernal USB software Bus by TCP is not installed. Looking for driver fails.

  Note: the only known problem I have is that I can't print to a printer USB connected in local (HP 5280).  Curious, the printer PC utility I can print a test page.  Microsoft Office 2007 apps, not printing.

  I get the same error message.

  It seems to be related to my D - Link DIR-655 Router and software (offered through D-Link) called "SharePort," which allows the USB port at the back of the router to use for networking!

  I have 5 PCs on my home network and printer. With installed Shareport, I connected my printer to the router via the USB port. I don't have to have the computer on it, I used initially to install the printer.

  To access the printer on any PC, I just have the icon in my taskbar.

  The error message is displayed because, by default, SharePort is closed and it reads it as "not installed"!

  I used it with Vista and Windows 7 Ultimate x 32 and x 64 with no problems!

  Just as with the 'coprocessor' "impossible to install driver" error message, I uninstalled them in (several times) Device Manager and the error messages no longer appear!

  So, in my case, the messages themselves were the only mistake!

  FYO: Coprocessor refers to hardware devices such as fingerprint security to access your PC, instead of a password!

  I hope this has been helpful!

• What is the function of the IOS minimum set required for VPN site-to-site software?

  Hi guys,.

  I have a Cisco 1841 router to do a VPN site-to site. I would like to know what is the function of the IOS minimum set required for VPN site-to-site software?

  Thanks in advance.

  Hi Ja,

  Advanced security or more should do it. The version of the IOS, you can try later 12.4 T which is c1841-advsecurityk9 - mz.124 - 24.T5.bin, in which case you don't want to go to 15.1 still.

  I hope this helps.

  Raga

• I just got a chat session with unnecessary failure to load Adobe. I bought LR6 in September. He worked for a while. Now my develop the module is disabled and it says that I have to put the licensed software. I have my number series but for some reason, it

  I just got a chat session with unnecessary failure to load Adobe. I bought LR6 in September. He worked for a while. Now my develop the module is disabled and it says that I have to put the licensed software. I have my number series but for some reason any it not reactivate my software. I downloaded the software directly from Adobe. I paid for the license from Adobe. I have a serial number adobe, but nothing works.

  Hi iamangryatlightroom,

  Please refer to the related discussion and follow the steps to solve the problem.

  Reference: Lightroom 5.5 'Module Development disabled, please renew your membership'

  Let us know if that helps.

  Kind regards

  Mohit

• can you have a version of CS and several version of the software installed for example Lightroom CC both?

  can you have a version of CS and several version of the software installed for example Lightroom CC both?

  Yes, you can have multiple versions installed.

  Please see this link:

  Download previous versions of Adobe Creative applications-

  Download previous versions of Cloud Creative applications

  You can have both CC and CS6 installed through creative cloud. You can also leave the old purchased software installed.