HP Support Assistant and update my system istaation

Similar Questions

• Product name: HP Pavilion 17 N: HP Support Assistant > HP updates > update BIOS (AMD processors) - clear update reminder?

  Hello

  I got a recommended set the HP Support Assistant program to update update for HP Notebook System BIOS (AMD processors).  I installed the update to the BIOS but the HP Support Assistant still says I need to run the BIOS update.  So I ended that run the BIOS update 2 times more but it prompt update with the exclaimation point in the promgram HP Support Assistant to delay the update of the BIOS is always there to want me to install the BIOS update.

  How can I clear this reminder of update of the HP Support Assistant program?

  You are welcome!

  1. If machine BIOS update after downloading, it will automatically start the system and show you the whole process and progress.

  2 just by downloading the BIOS update does not update. However no Expert here don't advise update BIOS to do as a routine, including through HPSA.

  If an UPDATE of the BIOS damage your laptop computer, you will not be able to turn on the machine - in short - it'll be no more than an expensive paper weight.

  3 If the BIOS has been updated successfully, then you go and not be able to on & do your work in portable as usual.

  Concerning

  Visruth

• HP support assistant installation update fails

  

  I keep updating, but it shows me just the result of this, someone help me please!

  Hi @WkkXiaoZ ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your laptop HP and issues with the HP Support Assistant does not update correctly. Here is a link to troubleshoot the HP Support Assistant. I uninstall the HP Support Assistant software and reinstall it.

  Here is a link to HP Support Assistant download, if you need it.

  I hope this helps.

  Thank you.

• Computer format Microtour HP Pro 3010: Hp Support Assistant and LAN with Proxy authentication

  Dear friends,

  I would only know if and how I can 'use' Hp Support Assistant in my office desktop pc, because my desktop pc itself works in the breast of a LAN with proxy authentication.

  Thank you, Paolo ([Personal Information Removed)

  Hello

  Welcome to the HP Support forum!

  Yes, you can use it as long as the desktop PC is HP branded.

• HP Support Assistant and public service center

  Windows 8.1: I tried to update the HPSA from the download Web site, the installation failed and gives error 1603 error during installation, see Windows Installer (Msi.chm) MSDN help. I tried the same thing once again. I tried to uninstall in Control Panel programs it does not find necessary files. The same problem occurs with the public service center.

  The computer of my wifes HP Windows 8.1 HPSA had updates of hardware problems after installing one for WI - FI and HP support by phone me reinstall the HPSA Web site, it worked well he then pursued the conclusion/download/install updates. A week later, he continues to automatically find, download, and install updates material very well.

  If you can restore the initial framework of HP software using the restore method I listed above and then try the suggested fix (restore HPSA, install the update).

  If you can't get it back, here is the download for 8.0: HP software framework

  Make sure that you disable the programs before proceeding with all stages of work in the background: prevent opening software programs when Windows starts (Windows 8)

  I hope that it works, the next steps are probably a factory restore.

• Cannot use, uninstall or reinstall HP Support Assistant

  I had a crash of hard disk and reinstalled from a backup, but the restoration was not complete. Things work pretty well, but not 100%. The key is that my HP Support Assistant PC health does not work and I can't uninstall or reinstall. They are not in the list of installed programs. I get the message that there is already a version of the wizard for help on my drive, whether the download don't reinstall or update.

  I have a HP Pavilion (all-in-One) MS-225 with Win7 Home Premium, 64-bit. It's a year and a half, is no longer under warranty. Is there a way out of this dilemma? Thank you!

  Frank

  UPDATE: I just got the update to run, but it gave me this error message:

  "HP Support Assistant Application Update / your system does not satisfy the minimum requirements for this patch." / However was cancelled. (1602).

  

  Arniceous,

  Thank you for your response and suggestions.

  After a lot of trial and error, I finally got it works as follows: first of all, I downloaded and installed the latest update for HP Update. Then I renamed the folder HP Support Assistant (didn't do any deletion again) by adding ".old" to it and retries, download and install the latest update for the wizard. This time, he worked and installed!

  So at this stage my PC is OK again and back to where it was before the crash of hard/restore disk. All HP now works as it should.

  I hope this can help you and others in the effort to repair that do not have HP help or a fix for.

  Frank D

• HP Support Assistant is suspended

  Hello

  I: win8/64 on HP Probook s 4740

  When I open HP Support Assistant, he begins to occupy more and more memory.

  Soon, he takes 5GBytes and reached the top of the physical memory. HPSA is unresponsive and finally the system is also frozen (hard drive still works).

  I tried already to reintsall HPSA, but the problem remains.

  Concerning

  DR701

  Please uninstall the existing version of HP Support Assistant and restart the system.

  Download and install the latest version of the HP Support Assistant software from the following link:

  http://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64126.exe

• HP Pavilion 500 series: I get a message saying that you have pending updates for Hp Support Assistant over and over again

  HI a little while back I upgraded to anniversary Windows 10 update things went well for me I keep hp Support Assistant on my desktop in the process of updating Windows 10 anniversary.  Finally, I decided one day to check hp Support Assistant to ensure that I had the lastestet version.  I went into Hp Support Assistant and clicked on about and clicked on the button for the latest version control, then a window is come in saying I had pending updates for Hp Support Assistant I would like to apply or not.  I pushed on the Yes button.  After the download and install updates and hp support Assistant stops and tempary files are deled then hp support Assistant will restart and return to the start page.  Everything seems to work fine download with green and white checkmarks circles with the categories above.

  I guesss I am asking for help it is because for days and days now when I go to HP support Assistant and click search the latest version that I get this message, you have pending updates for the support of hp Assistant you would like to apply or not.  I would now like to how pending updates will I have to ask a support Assistant hp until I don't see updates are available for the support of hp Assistant.

  Here is some information that might be helpful below:

  HP Supportt Assistant program file version: 16.101.7752

  How can I ensure that I have the latest version of the Support Wizard on my desktop computer.

  HP Support Assistant: 8.3.34.7

  Patch: 8.3.34.7

  Framework: 12.5.32.37

  Configuration files: 8.0.6294.2155

  Let me now is how easyier I could apply all updates waiting for the support of hp Assistant for Windows 10 home Edition 64-bit operating system.

  Thanks for your time and your help.

  @funny35,

  I'm glad that I could be useful,

  To help others looking for the same solution, please click on the tab "accepted solution".
  
  I thank you for your time and have a nice day!
  
  Kind regards

• HP Pavilion Notebook - 15-p204: UPDATE of HP SUPPORT ASSISTANT HP BIOS update for Intel processor (F43) - SHOWING AGAIN

  Hello

  I am new to the community of HP.

  I'm having a problem. Well, I can't really say it is a MAJOR problem because there is no threat to the system or anything, it's just one of those little annoying things.

  Yesterday, I updated my BIOS F.43 after being invited by HP support assistant. Update succeeded, charged back up the laptop, and the watch update STILL not installed on the HP support assistant. I reinstalled it and it still shows the same thing.

  It's just a bug and it is really installed and the wizard of support has not been updated?

  Thank you

  Hi @GarethWilliamss,

  Thanks for posting in the Forums of HP and welcome.

  I read on the HP Support Assistant and prompt you to download on your HP Pavilion Notebook 15 - p204. As you can imagine this is a glitch. Ignore the update.

  I hope this helps.

  Please let me know if this help solve the problem by marking this post as accept as a Solution.

  Thank you.

• Support Assistant does not and will not uninstall

  I have HP Pavilion g series laptop running Windows 7 and used and fairly regularly updates from HP support Assistant.  Recently, whenever I try to run HP Support Assistant I get the message "HP Support Assistant has stopped working"

  When I continue and follow the link "Check online for a solution", nothing happens.

  I tried the uninstall programs and features in Control Panel, but it will not uninstall.  When the uninstall process early, I get an error message: -.

  "Error1316 a network error has occurred trying to read the file C:\Windows\Installer\HPSupportAssistant.msi.

  Uninstalling then rolls back leaving the program on the computer and it is still in the list of installed programs and features.

  Therefore, I am unable to do a clean install of HP Support Assistant. I tried to install on the version on my computer and get a message "the following file is already on your computer c:\setup\SP64126\Metro.xml you want to overwrite this file?  I click 'Yes to all' installation is over in a Flash and Assistant support still does not work. The same message reappears. A vicious circle. How can I uninstall?

  Thank you

  Hello

  What is the product number of the laptop?

  Try these,.

  Run this FixIt before performing the steps below.

  1. download the executable HPSA you product site (OR) click on the portable computer option listed here at the top right of the page.

  2 download and install 7-Zip.

  3. open 7 - Zip and browse to the executable file HP Support Assistant.

  4. right click on the OGANotifier_ENU.msi HPSA and select 7 - Zip > Archive open.

  5. a new window should open, showing a folder without a name.

  6. click on the icon of the snippet at the top of 7 - Zip.

  7. a window should open asking where you want to extract this file.

  Choose a location and name a folder to make it extracted.  For example, c:\users\username\documents\hpsa and this file without a name would be extracted from this place.

  8. in Windows, navigate to this newly extracted folder.  Click UninstallHPSA.exe, and then select run as administrator.

  Delete SP64126 C:\Setup folder if its seen here

  9. now that the uninstall program is run in administrator mode, REBOOT.

  10. once the system is back on again & loaded completely, go to the extracted folder.  Right click on setup.exe, and select run as administrator.

  11. follow the installer until you get a successful installation message.

  This would remove HP Support Assistant and reinstall it.

  Thank you

• HP Support Assistant update problem

  HP Pavilion dv6-2155dx laptop

  Windows 7 operating system

  .

  I was up later than usual night and the computer was always after midnight. It is usually out before this date. I think that the HP Support Assistant has been programmed to do a tune-up once every two months to 23:00 or 12: 00 but did not a update for a long time because I turn off the computer before the scheduled time.

  .

  The HP Support Assistant started a tune-up as expected but is still running. In my view, it has begun on 28/07/2012.

  HP Support Assistant says "Tune up underway". Happened for several days and don't quit. Until today, he said it as to defragment my hard drive.

  How can I stop and see the results. TS?  All I can find is a list with checkmarks.  There is a red X with the line that indicates.

  Help, please. Thank you

  Cyndi

  {Information}

  Hello

  Unit stop will cause any damage to your device. You can uninstall HP Support Assistant, and reinstall the battery pack closing does not work.

• HP Support Assistant - uninstalled and reinstalled - now it does not work!

  My HP Support Assistant stuck on Create Restore Point.   Well, I followed your instructions for which has been published in many other threads and uninstall HP Support Assistant and re-installed, and now it won't do anything.  It opens upward and the button FOLLOWING is not highlighted if I click it nothing happens... it's totally useless now.  What can I do to make it work again?  Help! (see image below - all I can do is minimize, maximize, or close the screen.  FORWARD button does nothing!)

  My computer is only 1 year old and I run Windows 8-64 bit.  Never had a problem with it before, but tried the air upward and it got stuck about to restore, so I followed your instructions, rebooted after UN-installing and uninstall, now, it won't do anything.   I also tried to restore HP Support Assistant of the Recovery Manager and it's always the same: do nothing.  How can I get my updates now?

  I have a HP Pavilion p6 2310.  I have installed Windows 8.1, it is fair to Windows 8.  Thank you.

  Never mind... I fixed it myself.  I did a system restore before I uninstalled and reinstalled HP Support Assistant yesterday and now it works again!

• HP 250 G4: update Bios stuck (HP Support Assistant)

  Hello

  I was updating some drivers through HP Support Assistant, and BIOS update got stuck as shown on the picture below. I was hoping that someone will be able to direct me what to do next. I'm afraid the computer restart or stop the installation.

  If I stop and install an update of the Bios from another somewhre, that will maybe bad installation?

  Thanks in advance,

  Miloš

  

  Hello

  You are welcome

  The flash would have occurred at the start, so that this didn't happen, your existing bios revision will not have been affected.

  My personal opinion would be not updated the bios unless the update fixes a problem that you are experiencing or adds additional functionality you need - if the machine is running Ok, there really is no need to update.

  Note:  I see in your screenshot that your current bios revision is F.1A - there are 2 dream later listed for your laptop.  The HP Bios updates are cumulative, so if you don't want to update, the latest version will contain all the corrections/improvements offered by previous versions - the last enumerated revision is here.

  Kind regards

  DP - K

• How to get hp support assistant to install and works on windows 7

  I am trying to install hp support assistant on my hp pavilion dv5178us laptop running windows 7 32-bit, after I downloaded the windows version 7 of it from hp site, it installs, but during the installation, I get an error message saying login average with administrator rights before you install HP Support Assistant. I am the only user of the pc and I use the administrator account, so I want to know what's the problem here; I really need to get the wizard of support at work because my pc has many outdated drivers.

  I was getting the newspaper even with administrator rights after having downloaded the file Wizard help SP54620 to install on my Mini-210. I had major problems after an automatic update Windows 7 a few days ago and I got uniinstalled Support Assistant and was going to reinstall to correct one of the many problems after the update from Windows 7. I found this file was already on my C: drive in the SwSetup folder. This file is the program HP set up files for the programs of HP that is installed at the factory. I opened the file SP5460 which was SwSetup folder, and click on the setup.exe file and got the same message from the administrator. I then noticed a msiinstaller.exe in the SP5460 folder and open that and installed the HP Support Assistant.

• HP Support Assistant is not refreshing / verification of updates

  Hello

  Please my hp support assistant refuses to cool off, she who wrote "stop operation please wait" and I can't even check updates

  Hello D7N07PA,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that your HP Support Assistant does not update correctly. I would recommend that you uninstall the HP Support Assistant and download and install the latest version of the HP Support Assistant. This should solve your problem of not updated correctly.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!